AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

116-6894 CONVERSION AR-CRANK ROTATION CONVERTS STANDARD ROTATION TO REVERSE ROTATION AN ATTACHMENT 3516B


BASIC ENGINE
CRANKSHAFT GP
ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
AIR COMPRESSOR GP

MARINE ENGINE 3516B MARINE ENGINE 8KN
 3516B Marine Engine 8KN00001-UP SEBP2418 3516B 8KN   (1994)

BASIC ENGINE

CRANKSHAFT GP
116-6894 CONVERSION AR-CRANK ROTATION
CRANKSHAFT AS
448-8940 CRANKSHAFT AS
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
 

#SEBP24180001
 

116-6894: CONVERSION AR-CRANK ROTATION

116-6894 CONVERSION AR-CRANK ROTATION
CONVERTS STANDARD ROTATION TO REVERSE ROTATION
AN ATTACHMENT
i02302848 SEBP2418
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8N-5768 Y [1] GEAR GP-FRONT (RH)  
  116-6905 Y [1] GEAR GP-REAR (REVERSE ROTATION)  
  1A-2029 [4] BOLT (3/8-16X1.125-IN)  
    S/N S2J170-178; S2L252-260; S2M114-115; S2X107;118-119;122-123;132-135;141;150;158;161;166;170;177;189-190;196-197;203-204
  9S-8893 [12] BOLT-12 POINT HEAD (1-14X4-IN)  
  1N-3565 [1] FLYWHEEL AS  
    S/N 2EZ1-355; 4BW1-570; 4TN1-822; 7HM1-269; 8CN1-211; 8KN1-578; BRN1-194; S2J1-107; S2L1-128; S2M1-101; S2S1-105; S2X1-116; S2Y1-101
  1N-5743 GEAR-FLYWHEEL (183-TEETH)  
  243-3219 [1] FLYWHEEL AS  
    S/N 4TN823-826; S2J108-111; S2L129-135; S2M102; S2N1-103; S2S106-107; S2X117; S2Y102-103
  233-0643 GEAR-FLYWHEEL (183-TEETH)  
  243-3221 [1] FLYWHEEL AS  
    S/N 2EZ356-UP; 4BW571-UP; 4TN827-UP; 7HM270-UP; 8CN212-UP; 8KN579-UP; BRN195-UP; S2J112-UP; S2L136-UP; S2M103-UP; S2N104-UP; S2S108-UP; S2X118-UP; S2Y104-UP
  233-0644 [1] GEAR-FLYWHEEL (183-TEETH)  
  117-9308 [2] PLATE  
    S/N S2J170-178; S2L252-260; S2M114-115; S2X107;118-119;122-123;132-135;141;150;158;161;166;170;177;189-190;196-197;203-204
  5P-8839 [12] WASHER-HARD (28X42X4-MM THK)  
  128-5993 [2] WASHER-THRUST  
    S/N S2J170-178; S2L252-260; S2M114-115; S2X107;118-119;122-123;132-135;141;150;158;161;166;170;177;189-190;196-197;203-204
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180002
 

100-8318: ENGINE AR

100-8318 ENGINE AR
S/N 8KN1-99999
RATED SPEED 1301-RPM TO 1600-RPM. PRIOR TO ORDERING 10R-9952 KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN. CYLINDER HEAD. INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE
i02251059 SEBP2418
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  107-7197 Y [1] AFTERCOOLER GP-TREATED WATER  
  124-5513 Y [1] BREATHER GP (CRANKCASE)  
  106-4595 Y [1] CAMSHAFT GP  
  8N-8993 Y [1] CONNECTION GP-WATER (INLET, LH)  
  121-3321 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  4W-5891 Y [1] COOLER GP-ENGINE OIL  
  121-3552 Y [1] COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)  
  4W-1529 Y [1] COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE)  
  107-0278 Y [1] COVER GP-FRONT HOUSING  
  101-0831 Y [12] COVER GP-VALVE MECHANISM  
  8N-0337 Y [1] CRANKSHAFT GP  
  101-0828 Y [1] CYLINDER BLOCK GP  
    S/N 8KN1-565
  240-6653 Y [1] CYLINDER BLOCK GP  
    S/N 8KN566-99999
  101-0830 Y [16] CYLINDER HEAD GP  
  8N-0339 Y [1] DAMPER GP  
  7E-7647 Y [1] DRIVE GP-ACCESSORY (LOWER, LH)  
  7N-1875 Y [1] FILLER GP-ENGINE OIL (CYLINDER BLOCK)  
  112-4921 Y [1] FILTER GP-ENGINE OIL (RH)  
  112-4922 Y [1] FILTER GP-FUEL (RH)  
  7N-4851 Y [1] FLYWHEEL GP  
  7C-9784 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP)(ENGINE)  
  8N-7174 Y [1] GEAR GP-FRONT (STANDARD ROTATION)  
  101-0835 Y [1] GEAR GP-REAR  
  101-1269 Y [1] HOUSING GP-FLYWHEEL  
  4P-5426 Y [1] HOUSING GP-FRONT (ACCESSORY DRIVE)  
  7E-6872 Y [1] LIFTING GP-ENGINE  
  107-0862 Y [1] LINES GP-TURBOCHARGER AIR  
  7E-9252 Y [1] LINES GP-ENGINE OIL  
  101-1246 Y [1] LINES GP-FUEL INJECTION  
  7E-1463 Y [1] LINES GP-TURBOCHARGER OIL  
    S/N 8KN1-132
  141-6751 Y [1] LINES GP-TURBOCHARGER OIL  
    S/N 8KN133-99999
  120-4346 Y [1] LINES GP-WATER (AFTERCOOLER)  
  115-7850 Y [1] LINES GP-WATER (LOWER)  
  116-9880 Y [1] LINES GP-TURBOCHARGER WATER (TURBOCHARGER)  
  107-0474 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN1-587
  261-7697 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN588-99999
  100-3144 Y [1] MANIFOLD GP-EXHAUST  
  7C-7178 Y [1] PAN GP-OIL (DEEP SUMP)  
  101-0829 Y [16] PISTON & ROD GP  
    S/N 8KN1-565
  223-6363 Y [16] PISTON & ROD GP  
    S/N 8KN566-587
  281-6139 Y [16] PISTON & ROD GP  
    S/N 8KN588-99999
  106-9873 Y [1] PUMP GP-ENGINE OIL (2-SECTION GEAR)  
  8N-6151 Y [1] PUMP GP-FUEL TRANSFER (1-SECTION GEAR)  
  116-7010 Y [16] PUMP GP-FUEL INJECTION  
  9Y-8175 Y [1] PUMP GP-AUXILIARY WATER (AFTERCOOLER)  
  2W-9729 Y [1] PUMP GP-WATER  
  8N-7643 Y [1] HOUSING & REGULATOR GP (INLET CONTROL)  
  7W-3813 Y [1] SEAL GP-CRANKSHAFT  
  107-9521 Y [1] SHIELD GP-EXHAUST  
    S/N 8KN1-132
  141-6750 Y [1] SHIELD GP-EXHAUST  
    S/N 8KN133-99999
  119-7334 Y [1] TANK GP-EXPANSION  
  119-9499 Y [1] TURBOCHARGER GP  
  100-3905 Y [16] VALVE MECHANISM GP  
    S/N 8KN1-572
  195-1928 Y [16] VALVE MECHANISM GP  
    S/N 8KN573-578
  224-9869 Y [16] VALVE MECHANISM GP  
    S/N 8KN579-99999
   
   
    PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
   
    AVAILABLE REPAIR KIT(S):
  10R-9952 Y [1] KIT-ENGINE OVERHAUL (TOP END)  
    (PRIOR TO ORDERING THE ABOVE KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN CYLINDER HEAD &
    INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE.)
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180003
 

173-1806: ENGINE AR

173-1806 ENGINE AR
S/N 8KN376-UP
RATED SPEED 1301-RPM TO 1600-RPM. **PRIOR TO ORDERING 10R-9953 KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN. CYLINDER HEAD. INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE***
i02432541 SEBP2418
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  107-7197 Y [1] AFTERCOOLER GP-TREATED WATER  
  124-5513 Y [1] BREATHER GP (CRANKCASE)  
  106-4595 Y [1] CAMSHAFT GP  
  8N-8993 Y [1] CONNECTION GP-WATER (INLET, LH)  
  121-3321 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  4W-5891 Y [1] COOLER GP-ENGINE OIL  
  121-3552 Y [1] COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)  
  4W-1529 Y [1] COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE)  
  107-0278 Y [1] COVER GP-FRONT HOUSING  
  101-0831 Y [12] COVER GP-VALVE MECHANISM  
  8N-0337 Y [1] CRANKSHAFT GP  
  101-0828 Y [1] CYLINDER BLOCK GP  
    S/N 8KN376-565
  240-6653 Y [1] CYLINDER BLOCK GP  
    S/N 8KN566-UP
  101-0830 Y [16] CYLINDER HEAD GP  
  8N-0339 Y [1] DAMPER GP  
  7E-7647 Y [1] DRIVE GP-ACCESSORY (LOWER, LH)  
  173-6058 Y [1] ELECTRONICS GP-ENGINE RATINGS  
  7N-1875 Y [1] FILLER GP-ENGINE OIL (CYLINDER BLOCK)  
  112-4921 Y [1] FILTER GP-ENGINE OIL (RH)  
  112-4922 Y [1] FILTER GP-FUEL (RH)  
  7N-4851 Y [1] FLYWHEEL GP  
  7C-9784 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP)(ENGINE)  
  8N-7174 Y [1] GEAR GP-FRONT (STANDARD ROTATION)  
  101-0835 Y [1] GEAR GP-REAR  
  101-1269 Y [1] HOUSING GP-FLYWHEEL  
  4P-5426 Y [1] HOUSING GP-FRONT (ACCESSORY DRIVE)  
  7E-6872 Y [1] LIFTING GP-ENGINE  
  173-1805 Y [1] LINES GP-TURBOCHARGER AIR  
  115-7860 Y [1] LINES GP-ENGINE OIL  
  101-1246 Y [1] LINES GP-FUEL INJECTION  
  162-5719 Y [1] LINES GP-TURBOCHARGER OIL  
  165-6676 Y [1] LINES GP-WATER (AFTERCOOLER)  
  115-7850 Y [1] LINES GP-WATER (LOWER)  
  161-4087 Y [1] LINES GP-TURBOCHARGER WATER  
  107-0474 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN376-585
  253-4267 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN586-UP
  167-1759 Y [1] MANIFOLD GP-EXHAUST  
  7C-7178 Y [1] PAN GP-OIL (DEEP SUMP)  
  101-0829 Y [16] PISTON & ROD GP  
    S/N 8KN376-565
  223-6363 Y [16] PISTON & ROD GP  
    S/N 8KN566-587
  281-6139 Y [16] PISTON & ROD GP  
    S/N 8KN588-UP
  106-9873 Y [1] PUMP GP-ENGINE OIL (2-SECTION GEAR)  
  8N-6151 Y [1] PUMP GP-FUEL TRANSFER (1-SECTION GEAR)  
  116-7010 Y [16] PUMP GP-FUEL INJECTION  
  9Y-8175 Y [1] PUMP GP-AUXILIARY WATER (AFTERCOOLER)  
  2W-9729 Y [1] PUMP GP-WATER  
  8N-7643 Y [1] HOUSING & REGULATOR GP (INLET CONTROL)  
  7W-3813 Y [1] SEAL GP-CRANKSHAFT  
  173-7673 Y [1] SHIELD GP-EXHAUST  
  8N-7717 Y [1] TANK GP-EXPANSION  
  159-8828 Y [1] TURBOCHARGER GP  
  100-3905 Y [16] VALVE MECHANISM GP  
    S/N 8KN376-572
  195-1928 Y [16] VALVE MECHANISM GP  
    S/N 8KN573-578
  224-9869 Y [16] VALVE MECHANISM GP  
    S/N 8KN579-UP
   
    PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
   
    AVAILABLE REPAIR KIT(S):
  10R-9953 Y [1] KIT-ENGINE OVERHAUL (TOP END)  
    (PRIOR TO ORDERING THE ABOVE KIT, PLEASE REFERENCE IRM PELJ1171 & VERIFY THAT THE CORRECT REMAN CYLINDER HEAD &
    INJECTORS ARE IN THE KIT BASED ON SELECTED ENGINE ARRANGEMENT & SERIAL NUMBER RANGE.)
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180004
 

173-6955: ENGINE AR

173-6955 ENGINE AR
S/N 8KN376-99999
RATED SPEED 1800-RPM
i02251288 SEBP2418
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  107-7197 Y [1] AFTERCOOLER GP-TREATED WATER  
  124-5513 Y [1] BREATHER GP (CRANKCASE)  
  106-4595 Y [1] CAMSHAFT GP  
  8N-8993 Y [1] CONNECTION GP-WATER (INLET, LH)  
  121-3321 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  4W-5891 Y [1] COOLER GP-ENGINE OIL  
  121-3552 Y [1] COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)  
  4W-1529 Y [1] COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE)  
  107-0278 Y [1] COVER GP-FRONT HOUSING  
  101-0831 Y [12] COVER GP-VALVE MECHANISM  
  8N-0337 Y [1] CRANKSHAFT GP  
  101-0828 Y [1] CYLINDER BLOCK GP  
    S/N 8KN376-565
  240-6653 Y [1] CYLINDER BLOCK GP  
    S/N 8KN566-99999
  101-0830 Y [16] CYLINDER HEAD GP  
  8N-0339 Y [1] DAMPER GP  
  7E-7647 Y [1] DRIVE GP-ACCESSORY (LOWER, LH)  
  173-6059 Y [1] ELECTRONICS GP-ENGINE RATINGS  
  7N-1875 Y [1] FILLER GP-ENGINE OIL (CYLINDER BLOCK)  
  112-4921 Y [1] FILTER GP-ENGINE OIL (RH)  
  112-4922 Y [1] FILTER GP-FUEL (RH)  
  7N-4851 Y [1] FLYWHEEL GP  
  7C-9784 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP)  
  8N-7174 Y [1] GEAR GP-FRONT (STANDARD ROTATION)  
  101-0835 Y [1] GEAR GP-REAR  
  101-1269 Y [1] HOUSING GP-FLYWHEEL  
  4P-5426 Y [1] HOUSING GP-FRONT (ACCESSORY DRIVE)  
  7E-6872 Y [1] LIFTING GP-ENGINE  
  174-7083 Y [1] LINES GP-TURBOCHARGER AIR  
  7E-9252 Y [1] LINES GP-ENGINE OIL  
  101-1246 Y [1] LINES GP-FUEL INJECTION  
  153-4060 Y [1] LINES GP-TURBOCHARGER OIL  
  120-4346 Y [1] LINES GP-WATER (AFTERCOOLER)  
  115-7850 Y [1] LINES GP-WATER (LOWER)  
  177-1004 Y [1] LINES GP-WATER (TURBOCHARGER)  
  107-0474 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN376-587
  261-7697 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN588-99999
  Y [1] MANIFOLD GP-EXHAUST  
  7C-7178 Y [1] PAN GP-OIL (DEEP SUMP)  
  101-0829 Y [16] PISTON & ROD GP  
    S/N 8KN376-565
  223-6363 Y [16] PISTON & ROD GP  
    S/N 8KN566-587
  281-6139 Y [16] PISTON & ROD GP  
    S/N 8KN588-99999
  106-9873 Y [1] PUMP GP-ENGINE OIL (2-SECTION GEAR)  
  100-8774 Y [16] PUMP GP-FUEL INJECTION  
  8N-6151 Y [1] PUMP GP-FUEL TRANSFER (1-SECTION GEAR)  
  2W-9729 Y [1] PUMP GP-WATER  
  9Y-8175 Y [1] PUMP GP-AUXILIARY WATER (AFTERCOOLER)  
  8N-7643 Y [1] HOUSING & REGULATOR GP (INLET CONTROL)  
  7W-3813 Y [1] SEAL GP-CRANKSHAFT  
  177-1003 Y [1] SHIELD GP-EXHAUST  
  119-7334 Y [1] TANK GP-EXPANSION  
  Y [1] TURBOCHARGER GP  
  100-3905 Y [16] VALVE MECHANISM GP  
    S/N 8KN376-572
  195-1928 Y [16] VALVE MECHANISM GP  
    S/N 8KN573-578
  224-9869 Y [16] VALVE MECHANISM GP  
    S/N 8KN579-99999
   
    PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180005
 

219-5987: ENGINE AR

219-5987 ENGINE AR -RATED SPEED 1800-RPM
S/N 8KN1-99999
i02432551 SEBP2418
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  107-7197 Y [1] AFTERCOOLER GP-TREATED WATER  
  124-5513 Y [1] BREATHER GP (CRANKCASE)  
  106-4595 Y [1] CAMSHAFT GP  
  8N-8993 Y [1] CONNECTION GP-WATER (INLET, LH)  
  121-3321 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  4W-5891 Y [1] COOLER GP-ENGINE OIL  
  121-3552 Y [1] COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)  
  4W-1529 Y [1] COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE)  
  107-0278 Y [1] COVER GP-FRONT HOUSING  
  101-0831 Y [12] COVER GP-VALVE MECHANISM  
  8N-0337 Y [1] CRANKSHAFT GP  
  101-0828 Y [1] CYLINDER BLOCK GP  
    S/N 8KN1-565
  240-6653 Y [1] CYLINDER BLOCK GP  
    S/N 8KN566-99999
  101-0830 Y [16] CYLINDER HEAD GP  
  8N-0339 Y [1] DAMPER GP  
  7E-7647 Y [1] DRIVE GP-ACCESSORY (LOWER, LH)  
  220-2139 [1] ELECTRONICS GP-ENGINE RATINGS  
  7N-1875 Y [1] FILLER GP-ENGINE OIL (CYLINDER BLOCK)  
  112-4921 Y [1] FILTER GP-ENGINE OIL (RH)  
  112-4922 Y [1] FILTER GP-FUEL (RH)  
  7N-4851 Y [1] FLYWHEEL GP  
  7C-9784 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK) (DEEP SUMP)  
  8N-7174 Y [1] GEAR GP-FRONT (STANDARD ROTATION)  
  101-0835 Y [1] GEAR GP-REAR  
  101-1269 Y [1] HOUSING GP-FLYWHEEL  
  4P-5426 Y [1] HOUSING GP-FRONT (ACCESSORY DRIVE)  
  7E-6872 Y [1] LIFTING GP-ENGINE  
  115-7860 Y [1] LINES GP-ENGINE OIL  
  101-1246 Y [1] LINES GP-FUEL INJECTION  
  173-1805 Y [1] LINES GP-TURBOCHARGER AIR  
  162-5719 Y [1] LINES GP-TURBOCHARGER OIL  
  165-6676 Y [1] LINES GP-WATER (AFTERCOOLER)  
  115-7850 Y [1] LINES GP-WATER (LOWER)  
  161-4087 Y [1] LINES GP-TURBOCHARGER WATER  
  107-0474 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN1-585
  253-4267 Y [1] LINES GP-WATER (UPPER)  
    S/N 8KN586-99999
  167-1759 Y [1] MANIFOLD GP-EXHAUST  
  7C-7178 Y [1] PAN GP-OIL (DEEP SUMP)  
  101-0829 Y [16] PISTON & ROD GP  
    S/N 8KN1-565
  223-6363 Y [16] PISTON & ROD GP  
    S/N 8KN566-587
  281-6139 Y [16] PISTON & ROD GP  
    S/N 8KN588-99999
  106-9873 Y [1] PUMP GP-ENGINE OIL (2-SECTION GEAR)  
  8N-6151 Y [1] PUMP GP-FUEL TRANSFER (1-SECTION GEAR)  
  116-7010 Y [16] PUMP GP-FUEL INJECTION  
  2W-9729 Y [1] PUMP GP-WATER  
  9Y-8175 Y [1] PUMP GP-AUXILIARY WATER (AFTERCOOLER)  
  8N-7643 Y [1] HOUSING & REGULATOR GP (INLET CONTROL)  
  7W-3813 Y [1] SEAL GP-CRANKSHAFT  
  173-7673 Y [1] SHIELD GP-EXHAUST  
  8N-7717 Y [1] TANK GP-EXPANSION  
  159-8828 Y [1] TURBOCHARGER GP  
  195-1928 Y [16] VALVE MECHANISM GP  
    S/N 8KN1-578
  224-9869 Y [16] VALVE MECHANISM GP  
    S/N 8KN579-99999
   
    PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180006
 

144-0742: AIR COMPRESSOR GP

144-0742 AIR COMPRESSOR GP
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT
i00893649 SEBP2418
1440742 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4505 [4] LOCKWASHER  
2. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
3. 8M-7065 [1] GASKET (AIR INLET)  
4. 9M-0397 [1] ADAPTER  
5. 4W-9479 [1] MANIFOLD-EXHAUST  
6. 1S-7107 [1] GASKET  
7. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 7X-7732 [2] PLUG-PIPE  
9. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
10. 3B-4506 [6] LOCKWASHER  
11. 7N-7442 [2] GASKET  
12. 034-4160 [8] BOLT-LOCKING (5/16-18X1-IN)  
13. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
14. 7N-7446 [1] GASKET  
15. 8H-9789 [2] BALL BEARING  
16. 7N-7445 [1] CYLINDER BLOCK  
17. 7N-7448 [1] GASKET  
18. 7N-7447 [1] HEAD AS-COMPRESSOR  
  5L-5502 [1] FITTING  
  124-5572 [1] VALVE AS-RELIEF (AIR COMPRESSOR)  
19. 0S-1619 [5] BOLT (3/8-16X3-IN)  
20. 7N-7450 [1] COVER-UNLOADER  
21. 3B-4504 [2] LOCKWASHER  
22. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
23. 7N-7451 [1] GASKET-UNLOADER  
24. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
25. 1W-9276 [1] CRANKSHAFT-AIR COMPRESSOR  
26. 1W-9275 [1] CRANKCASE-COMPRESSOR  
27. 1W-9277 [1] COVER-AIR COMPRESSOR  
28. 1W-9279 [1] SEAL  
29. 1W-9278 [1] COVER-AIR COMPRESSOR  
30. 6F-7063 [1] NUT-SLOTTED  
31. 5P-8026 [1] PIN-COTTER  
32. 4H-3157 [1] KEY-WOODRUFF  
33. 4W-9489 [1] RING-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  7N-7435 [1] KIT-AIR COMPRESSOR (MAJOR REPAIR)  
    (INCLUDES VALVES, VALVE SEATS, BEARINGS, SPRINGS, GASKETS, COVER, SEALS, PINS, WASHERS & GUIDES)
  4P-6409 [1] KIT-PIN (AIR COMPRESSOR)  
  144-0503 [1] KIT-PISTON & RING (STANDARD)(AIR COMPRESSOR)  
    (INCLUDES PISTON, RING KIT, PISTON PIN & PISTON PIN BUTTON)
  144-0502 [1] KIT-PISTON RING (STANDARD)(AIR COMPRESSOR)  
    (INCLUDES PISTON RINGS & RING ENVELOPES)
  138-2887 [1] KIT-ROD & BEARING (AIR COMPRESSOR)  
    (INCLUDES ROD ASSEMBLY & BEARING KIT)
 

#SEBP24180007
 

1W-8495: AIR COMPRESSOR GP

1W-8495 AIR COMPRESSOR GP
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT
i00353908 SEBP2418
1W8495 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4505 [4] LOCKWASHER  
2. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
3. 8M-7065 [1] GASKET (AIR INLET)  
4. 9M-0397 [1] ADAPTER  
5. 4W-9479 [1] MANIFOLD-EXHAUST  
6. 1S-7107 [1] GASKET  
7. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4B-4845 [2] PLUG  
9. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
10. 3B-4506 [6] LOCKWASHER  
11. 7N-7442 [2] GASKET  
12. 034-4160 [8] BOLT-LOCKING (5/16-18X1-IN)  
15. 7N-7446 [1] GASKET  
16. 8H-9789 [2] BALL BEARING  
17. 7N-7445 [1] CYLINDER BLOCK  
18. 2B-0858 [1] PLUG-PIPE  
19. 7N-7448 [1] GASKET  
20. 7N-7447 [1] HEAD AS-COMPRESSOR  
21. 0S-1619 [5] BOLT (3/8-16X3-IN)  
22. 7N-7450 [1] COVER-UNLOADER  
23. 3B-4504 [2] LOCKWASHER  
24. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
25. 7N-7451 [1] GASKET-UNLOADER  
26. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
27. 1W-9276 [1] CRANKSHAFT-AIR COMPRESSOR  
28. 1W-9275 [1] CRANKCASE-COMPRESSOR  
29. 1W-9277 [1] COVER-AIR COMPRESSOR  
30. 1W-9279 [1] SEAL  
31. 1W-9278 [1] COVER-AIR COMPRESSOR  
32. 6F-7063 [1] NUT-SLOTTED  
33. 5P-8026 [1] PIN-COTTER  
34. 4H-3157 [1] KEY-WOODRUFF  
35. 4W-9489 C [1] RING-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  7N-7435 [1] KIT-AIR COMPRESSOR (MAJOR REPAIR)  
    (INCLUDES VALVES, SEATS, BEARINGS, SPRINGS, GASKETS, COVER, SEALS, PINS, WASHERS, & GUIDES)
  4P-6409 [1] KIT-PIN (AIR COMPRESSOR)  
  144-0502 [1] KIT-PISTON RING (STANDARD)(AIR COMPRESSOR)  
    (INCLUDES PISTON RINGS & RING ENVELOPES)
  144-0503 [1] KIT-PISTON & RING (STANDARD)(AIR COMPRESSOR)  
    (INCLUDES PISTON, RING KIT, PISTON PIN & PISTON PIN BUTTON)
  138-2887 [1] KIT-ROD & BEARING (AIR COMPRESSOR)  
    (INCLUDES ROD ASSEMBLY & BEARING KIT .010 OD)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24180008
 

8N-8360: AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
12 CU. FT./MIN. BELT DRIVEN
Type 1
FOR USE WITH UPPER LH ACCESSORY DRIVE
AN ATTACHMENT
i00415133 SEBP2418
8N8360 AIR COMPRESSOR GP Parts scheme 8N8360 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VALVE AS-VENT (AIR COMPRESSOR)  
2. 1N-2902 [1] PULLEY  
3. 6N-9042 [1] GASKET  
4. 5R-1771 [2] BOLT (3/8-16X5.5-IN)  
5. 2W-8338 [1] BRACKET AS  
6. 1W-0427 I [1] HOSE AS  
7. 9M-6522 [3] CONNECTOR (1/2-14 NPTF)  
8. 0S-1594 [5] BOLT (3/8-16X1-IN)  
9. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 3V-6153 I [1] HOSE AS  
11. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
12. 9L-5125 [1] ELBOW  
13. 032-1269 [4] ELBOW  
14. 3B-0551 [1] PLUG-PIPE  
15. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
16. 1W-6263 I [2] HOSE AS  
17. 061-9593 [1] BUSHING-REDUCER  
18. 8S-3215 [1] CLAMP-TUBE  
19. 2P-1306 [1] TEE  
20. 2N-5104 [1] CLAMP  
21. 9F-2247 [4] PLUG-PIPE  
22. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
23. 033-2177 [1] TEE-PIPE  
24. 6N-8744 [2] MOUNT  
25. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
26. 1N-2929 [1] BASE-AIR COMPRESSOR  
27. 2B-0858 [1] PLUG-PIPE  
28. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
29. 4B-4283 [2] WASHER (20.6X37.5X3.5-MM THK)  
30. 4J-4102 [1] SPACER (0.49X0.69X3.0-IN THK)  
31. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
32. 030-7972 [1] ELBOW  
33. 8B-2664 [1] BUSHING-REDUCER  
34. 7C-4165 [1] ADAPTER AS  
  7C-0234 [1] ADAPTER  
35. 7N-5244 [1] BUSHING  
36. 8M-5255 [1] SEAL-O-RING  
37. 0S-1590 [8] BOLT (3/8-16X2-IN)  
38. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 6V-7196 C [1] SEAL-LIP TYPE  
40. 9M-4815 [1] CLIP  
41. 6B-8128 [1] NIPPLE-PIPE  
42. 4F-4879 [1] BOLT (3/8-16X0.5-IN)  
43. 2W-8202 [1] GUARD AS  
44. 1W-8238 [1] ADAPTER  
  7N-4945 [1] GASKET  
45. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8N-3504 [1] V-BELT GP (AIR COMPRESSOR)  
47. 0S-1594 [9] BOLT (3/8-16X1-IN)  
48. 4D-0514 [1] PLUG-PIPE  
49. 9Y-5285 C [1] PULLEY AS  
50. 053-5065 C [1] SLEEVE  
51. 6N-8744 [1] MOUNT  
52. 032-1269 [1] ELBOW  
53. 3B-4618 [1] PIN-COTTER  
54. 1W-8495 Y [1] AIR COMPRESSOR GP  
55. 1D-4540 [2] BOLT (5/16-18X2.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
56. 4B-7770 [1] TEE  
57. 2M-4453 [1] SEAL-O-RING  
58. 4N-9681 [1] GOVERNOR AS-AIR COMPRESSOR  
  2S-2923 [1] COVER AS  
59. 6L-1883 [1] GASKET  
60. 9L-9132 [8] WASHER (10.2X25.5X2.5-MM THK)  
61. 061-9593 [1] BUSHING-REDUCER  
62. 1W-0428 I [1] HOSE AS  
63. 3B-0551 [1] PLUG-PIPE  
64. 4B-4283 [1] WASHER (20.6X37.5X3.5-MM THK)  
65. 5J-7303 [1] ELBOW  
   
    AVAILABLE REPAIR KIT(S):
  9M-0402 [1] KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)  
    (INCLUDES VALVE, FILTER, SPRING, COVER, & GROMMETS)
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24180009
 

8N-8360: AIR COMPRESSOR GP

8N-8360 AIR COMPRESSOR GP
12 CU. FT./MIN. BELT DRIVEN
Type 2
FOR USE WITH UPPER LH ACCESSORY DRIVE
AN ATTACHMENT
i00893648 SEBP2418
8N8360 AIR COMPRESSOR GP Parts scheme 8N8360 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3516B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-2902 [1] PULLEY  
2. 1N-2929 [1] BASE-AIR COMPRESSOR  
3. 1W-0427 I [1] HOSE AS  
4. 150-4213 I [2] HOSE AS  
5. 1W-8238 [1] ADAPTER  
6. 2P-1306 [1] TEE  
7. 2W-8202 [1] GUARD AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
8. 2W-8338 [1] BRACKET AS  
9. 3V-6153 I [1] HOSE AS  
10. 4B-7770 [1] TEE  
11. 4N-9681 [1] GOVERNOR AS-AIR COMPRESSOR  
  2S-2923 [1] COVER AS  
12. 5F-5434 [1] VALVE AS-VENT  
13. 6L-1883 [1] GASKET  
14. 6N-8744 [3] MOUNT  
15. 6N-9042 [1] GASKET  
16. 7C-4165 [1] ADAPTER AS  
  127-5400 [1] BUSHING  
17. 7N-4945 [1] GASKET  
18. 8N-3504 [1] V-BELT GP (AIR COMPRESSOR)  
19. 9M-0378 [2] BOLT (5/16-18X2.87-IN)  
20. 9M-0766 C [1] BRACKET  
21. 9Y-5285 [1] PULLEY AS  
  053-5065 [1] SLEEVE  
22. 033-2177 [1] TEE-PIPE  
23. 144-0742 CY [1] AIR COMPRESSOR GP  
24. 152-1005 I [1] HOSE AS  
25. 235-2484 [1] SEAL-LIP TYPE  
26. 030-7972 [1] ELBOW  
27. 032-1269 [5] ELBOW  
28. 061-9593 [2] BUSHING-REDUCER  
29. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
30. 0S-1590 [8] BOLT (3/8-16X2-IN)  
31. 0S-1594 C [15] BOLT (3/8-16X1-IN)  
32. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
33. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
34. 5P-0840 [1] SEAL-O-RING  
35. 3B-4618 [1] PIN-COTTER  
36. 3S-8664 C [3] CLIP (LOOP)  
37. 4F-4879 [1] BOLT (3/8-16X0.5-IN)  
38. 4J-4102 [1] SPACER (0.49X0.69X3.0-IN THK)  
39. 5J-7303 [1] ELBOW  
40. 5M-2894 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 5P-8248 C [3] WASHER-HARD (20X36.5X3.5-MM THK)  
43. 5R-1771 [2] BOLT (3/8-16X5.5-IN)  
44. 6B-8128 [1] NIPPLE-PIPE  
45. 8B-2664 [1] BUSHING-REDUCER  
46. 235-3548 [1] SEAL-O-RING  
47. 8T-6757 [4] PLUG-PIPE  
48. 8T-6759 [1] PLUG-PIPE  
49. 8T-6761 [2] PLUG-PIPE (1-11-1/2 NPT THD)  
50. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
51. 9L-5125 [1] ELBOW  
52. 9L-9132 [8] WASHER (10.2X25.5X2.5-MM THK)  
53. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
54. 9M-6522 [3] CONNECTOR (1/2-14 NPTF)  
55. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2013/08/21
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/08/14
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500B and 3500 Marine Propulsion Engines with EUI Option
Special Instruction
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
3500B Engines
Connecting Rod and Main Bearing Journals
3500B Engines
Crankshaft
3500B Engines
Service Letter-China
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Systems Operation
Crankshaft
3500B Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500B Engines
Main Bearings
3500B Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B Engines
Disassembly and Assembly
Bearing Clearance - Check
3500B Engines
Crankshaft Main Bearings - Remove
3500B Engines
Crankshaft Main Bearings - Install
3500B Engines
Crankshaft - Remove
3500B Engines
Crankshaft - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Install
3500B Engines
Service Magazine
125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/01/28
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog 3516B :

100-8318 ENGINE AR
173-1806 ENGINE AR
173-6955 ENGINE AR
219-5987 ENGINE AR
AIR COMPRESSOR GP
144-0742 AIR COMPRESSOR GP
AIR COMPRESSOR GP
1W-8495 AIR COMPRESSOR GP
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.