AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8X-2369 TANK & MTG GP-HYDRAULIC S/N 4XM2009-3122 PART OF 112-4112 CHASSIS AR 12H NA MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
SHAFT GP
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 12H NA MOTOR GRADER 4XM
 12H Motor Grader 4XM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2421 12H NA 4XM   (1995)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
 

#SEBP24210710
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 4XM2009-3122
PART OF 112-4112 CHASSIS AR
i01072794 SEBP2421
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 [1] KEY (HYDRAULIC TANK)  
  8Y-6364 [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210711
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 4XM1-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00123237 SEBP2421
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
2A. 027-1287 [1] FITTING-GREASE (UNIVERSAL JOINT)  
2B. 9K-2721 [2] LOCKWASHER  
2C. 6G-6623 [1] SEAL  
2D. 5H-3593 [1] RETAINER-FELT  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP24210712
 

112-5499: VALVE & LINKAGE GP

112-5499 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 4XM1-UP
PART OF 112-5510 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00123239 SEBP2421
1125499 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER  
3. 8D-5634 [2] LEVER  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
44. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210713
 

124-0311: VALVE & LINKAGE GP

124-0311 VALVE & LINKAGE GP -5-BANK, RH; 4-BANK, LH
S/N 4XM1-UP
AN ATTACHMENT
i00123687 SEBP2421
1240311 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 6E-3038 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210714
 

7I-4621: VALVE & LINKAGE GP

7I-4621 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 4XM1-UP
AN ATTACHMENT
i00122355 SEBP2421
7I4621 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8646 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
7. 8W-0456 [1] SHAFT  
8. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
9. 8D-5633 [2] LEVER  
10. 101-2458 [2] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [12] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [20] LOCKWASHER  
18. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [10] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
34. 6V-8188 [2] NUT (1/2-13-THD)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCL)
40. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
41. 2G-6753 [1] KNOB-SCARIFIER  
42. 137-4516 [1] SHAFT  
43. 104-7429 [2] PLATE  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210715
 

7I-4622: VALVE & LINKAGE GP

7I-4622 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 4XM1-UP
PART OF 2A-6899 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00122356 SEBP2421
7I4622 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
9. 8D-5633 [2] LEVER  
10. 101-2458 [1] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [11] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [18] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [9] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
34. 6V-8188 [2] NUT (1/2-13-THD)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCL)
40. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
41. 2G-6740 [1] KNOB-RIPPER  
42. 137-4516 [1] SHAFT  
43. 104-7429 [2] PLATE  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210716
 

7I-4624: VALVE & LINKAGE GP

7I-4624 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 4XM1-UP
AN ATTACHMENT
i00122358 SEBP2421
7I4624 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8646 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  8L-8598 [1] ROD END  
7. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [1] END-ROD (5/16-24-THD)  
9. 8D-5633 [2] LEVER  
10. 101-2458 [1] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [11] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [18] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [9] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
34. 6V-8188 [2] NUT (1/2-13-THD)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EACH INCLUDES)
40. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
41. 2G-6753 [1] KNOB-SCARIFIER  
42. 137-4516 [1] SHAFT  
43. 104-7429 [2] PLATE  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210717
 

8X-1949: VALVE & LINKAGE GP

8X-1949 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N 4XM1-UP
PART OF 8W-6219 BLADE AR
i00122646 SEBP2421
8X1949 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 6E-3038 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [2] LEVER  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
8. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)(RH)  
  8L-8598 [1] ROD END  
9. 8D-5633 [2] LEVER  
10. 101-2458 [1] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [10] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [16] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [8] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 6V-8188 [2] NUT (1/2-13-THD)  
33. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 137-4516 [1] SHAFT  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
40. 104-7429 [2] PLATE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210718
 

6E-3032: VALVE GP-BANK 4

6E-3032 VALVE GP-BANK 4 -RH
S/N 4XM1-UP
PART OF 7I-4622, 7I-4624, 8X-1949 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00122162 SEBP2421
6E3032 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210719
 

6E-3038: VALVE GP-BANK 4

6E-3038 VALVE GP-BANK 4 -LH
S/N 4XM1-UP
PART OF 124-0311, 8X-1949 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00122168 SEBP2421
6E3038 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
3. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
4. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
5. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 101-0509 [5] SEAL-INTEGRAL  
7. 101-9346 [1] COVER  
8. 102-8385 [1] MANIFOLD  
9. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
10. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
11. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
12. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 12H NA :

TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWASHPLATE GP
169-3290 SWASHPLATE GP
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-0311 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4621 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4622 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4624 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4

Truck sale:

Caterpillar 12HNA, Construction
On Request 
Caterpillar 12HNA, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar 12HNA, Construction
96,997 USD 
Caterpillar 12HNA, Construction
- motor graders
WESTRAC
Western Australia, Australia
Caterpillar 12HNA, Construction
62,500 
Caterpillar 12HNA, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar 12HNA, Construction
69,800 
Caterpillar 12HNA, Construction
- motor graders
YANCEY BROS. CO.
GA
CATERPILLAR 12HNA 2007
 
CATERPILLAR 12HNA 2007
- MOTOR GRADERS
HASTINGS DEERING (AUSTRALIA) LTD.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.