AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-5595 CONSOLE GP-OPERATOR -SHIFTER S/N 4XM1-1737 PART OF 112-4112 CHASSIS AR 12H NA MOTOR GRADER


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-STEERING

MOTOR GRADER 12H NA MOTOR GRADER 4XM
 12H Motor Grader 4XM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2421 12H NA 4XM   (1995)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
 

#SEBP24210810
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4XM1-1737
PART OF 112-4112 CHASSIS AR
i00122525 SEBP2421
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
3. 188-1171 [1] PLATE AS  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
4. 7M-0706 [1] KNOB (SHIFTER)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 253-4019 [1] CONTROL-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER  
14. 105-8681 [1] GATE AS  
  M   METRIC PART
 

#SEBP24210811
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4XM1738-3126
PART OF 112-4112 CHASSIS AR
i00875197 SEBP2421
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M NUT-WELD (M6X1-THD)  
3. 198-7654 [1] PLATE AS  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 161-1343 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (PANEL SHIFT COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB (SHIFTER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24210812
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4XM3127-UP
PART OF 112-4112 CHASSIS AR
i01748413 SEBP2421
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
3. 198-7654 [1] PLATE AS  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 180-3531 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (SHIFT PANEL COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24210813
 

8X-2330: CONSOLE GP-OPERATOR

8X-2330 CONSOLE GP-OPERATOR
S/N 4XM1-UP
PART OF 112-4112 CHASSIS AR
i00122657 SEBP2421
8X2330 CONSOLE GP-OPERATOR Parts scheme 8X2330 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3676 [1] BASE  
2. 8X-1917 [1] CHANNEL AS  
3. 034-1994 [1] PIN  
4. 3B-4607 [2] PIN-COTTER  
5. 236-0737 [1] CYLINDER  
6. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
7. 8X-1921 [1] HOOD  
8. 8X-3789 [1] PANEL  
9. 2A-7184 [2] PLATE  
10. 8C-3442 [1] SPRING-COIL  
11. 2K-7979 [13] BUSHING  
12. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 169-3679 [1] CHANNEL AS  
14. 8X-1908 [1] PANEL  
15. 8X-1911 [1] PANEL  
16. 8X-2160 [1] LEVER (STEERING WHEEL TILT CONTROL)  
17. 8X-3951 [1] PANEL  
18. 5M-8500 [1] KNOB (STEERING WHEEL TILT CONTROL)  
19. 123-1201 [1] PLATE (LH)  
20. 8D-7960 [2] PLATE  
21. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 3Y-2806 [1] SPRING  
24. 8X-1904 [1] SPACER (20X35X26-MM THK)  
25. 6G-8814 [2] BRACKET  
26. 8X-1907 [1] SHAFT  
27. 160-8503 M [3] NUT (M10X1.5-THD)  
28. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
29. 2G-8572 [8] WASHER-SPECIAL  
30. 2G-8573 [8] CAP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 8X-5123 [1] RETAINER  
33. 8X-2161 [1] LEVER (STEERING COLUMN TILT)  
34. 9M-5590 [1] BALL  
35. 5C-8312 M [6] NUT (M4X0.7-THD)  
36. 110-6241 [1] BRACKET  
37. 206-4097 [8] FASTENER  
38. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
39. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
40. 174-8131 M [16] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
41. 8X-2893 M [10] NUT (M4X0.7-THD)  
42. 031-2666 [1] ROD  
43. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
44. 8X-1914 [1] SHAFT  
46. 2K-5830 [2] BEARING AS-NEEDLE  
47. 206-9651 [1] PLATE (RH)  
48. 4L-6454 [4] BOLT (3/8-16X1-IN)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 8X-3965 [1] RATCHET  
51. 3F-7514 [4] PIN  
52. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
53. 4B-4314 [1] RIVET  
54. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
55. 6G-2914 [1] LATCH  
56. 7I-4890 [1] PLATE AS  
57. 8L-7905 [2] RIVET-POP  
58. 8D-5641 B [14] BEARING  
59. 8T-1174 [4] SEAL-LIP TYPE  
60. 5P-5637 BD SEAL  
61. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
62. 5P-5639 BD SEAL  
63. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP24210814
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4XM1-1483
PART OF 112-4112 CHASSIS AR
i00123824 SEBP2421
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 136-5160 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 6J-1889 [1] SEAL-U-CUP  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP24210815
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4XM1484-2360
PART OF 112-4112 CHASSIS AR
i01091518 SEBP2421
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
  B   USE AS REQUIRED
 

#SEBP24210816
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4XM2361-3007
PART OF 112-4112 CHASSIS AR
i01273584 SEBP2421
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24210817
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4XM3008-UP
PART OF 112-4112 CHASSIS AR
i01621840 SEBP2421
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
47. 1V-6341 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24210818
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 4XM1-UP
PART OF 112-4112 CHASSIS AR
Type 1
i00122360 SEBP2421
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24210819
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 4XM1-UP
PART OF 112-4112 CHASSIS AR
Type 2
i01868213 SEBP2421
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3769 J [1] PUMP GP-METERING (HMU)  
2. 384-5820 [1] WHEEL AS  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (KIT INCLUDES SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 12H NA :

CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7E-6461 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7E-6461 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
134-3997 COMPRESSOR GP-REFRIGERANT
101-1759 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
101-1759 COMPRESSOR GP-REFRIGERANT
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING

Truck sale:

Caterpillar 12HNA, Construction
On Request 
Caterpillar 12HNA, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar 12HNA, Construction
96,997 USD 
Caterpillar 12HNA, Construction
- motor graders
WESTRAC
Western Australia, Australia
Caterpillar 12HNA, Construction
62,500 
Caterpillar 12HNA, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar 12HNA, Construction
69,800 
Caterpillar 12HNA, Construction
- motor graders
YANCEY BROS. CO.
GA
CATERPILLAR 12HNA 2007
 
CATERPILLAR 12HNA 2007
- MOTOR GRADERS
HASTINGS DEERING (AUSTRALIA) LTD.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.