OPERATOR STATION
SEAT GPCONTROL GP-BRAKE
WASHER GP-WINDOW
OPERATOR STATION
SEAT GP
#SEBP24210940
8Y-4194: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP24210941
8W-6318: SUPPORT GP-SEAT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-5536 | [1] | COVER | |
| 2. | 9X-2041 M | [5] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 3. | 8X-5538 | [1] | COVER AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 8X-5540 | [1] | COVER | |
| 5. | 6V-8801 | [8] | NUT (3/8-16-THD) | |
| 6. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 8X-5535 | [1] | SUPPORT AS | |
| 5H-0255 | [1] | BOSS | ||
| 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [24] | NUT-WELD (M10X1.5-THD) | ||
| 9G-9155 | [1] | CLIP | ||
| 8. | 8X-5534 | [1] | PAD | |
| 9. | 123-4618 | [1] | COVER | |
| 10. | 113-4251 | [1] | PLATE | |
| 11. | 106-5840 | [1] | COVER | |
| 12. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 13. | 123-4701 | [1] | SEAL | |
| 14. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 15. | 5P-5969 D | SEAL | ||
| 16. | 7G-4824 | [1] | STRAP | |
| 17. | 8E-7791 | [1] | STRAP | |
| 18. | 134-8273 M | [2] | SCREW-FLAT HEAD (M10X1.5X25-MM) | |
| 19. | 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP24210942
113-5800: SUSPENSION GP-SEAT
113-5800 SUSPENSION GP-SEAT
S/N 4XM1-UP
PART OF 112-9104, 112-9105 SEAT GP-SUSPENSION
AN ATTACHMENT
S/N 4XM1-UP
PART OF 112-9104, 112-9105 SEAT GP-SUSPENSION
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6022 | [1] | PLATE-SLIDE | |
| 2. | 8Y-6023 | [1] | PLATE-SLIDE | |
| 3. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 4. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 2K-4973 | [6] | LOCKNUT (3/8-16-THD) | |
| 6. | 113-5804 | [1] | HOUSING AS (LOWER) | |
| 7. | 113-5808 Y | [1] | HOUSING GP-SEAT SUSPENSION | |
| 8. | 8Y-6012 | [1] | ARM AS-SUSPENSION | |
| 9. | 1D-4677 | [4] | BOLT-CARRIAGE (3/8-16X1-IN) | |
| 10. | 101-0003 | [20] | FASTENER | |
| 11. | 163-1146 | [3] | FASTENER | |
| 12. | 166-6781 | [6] | FASTENER | |
| 13. | 5V-1497 | [1] | RETAINER | |
| 14. | 4V-7884 | [2] | BEARING | |
| 15. | 4V-8577 | [4] | BEARING | |
| 16. | 8Y-6024 | [2] | SHAFT AS | |
| 17. | 124-0507 | [1] | ABSORBER AS-SHOCK | |
| 18. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 19. | 197-7689 | [3] | FASTENER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5944 | [1] | KIT-SUSPENSION BOOT (SEAT) | ||
| (INCLUDES FASTENERS, RETAINERS & BOOT) | ||||
| 101-4194 | [1] | KIT-TETHER BELT (SUSPENSION SEAT) | ||
| (INCLUDES BELTS) | ||||
| 101-4195 | [1] | KIT-SUSPENSION ROLLER (SUSPENSION SEAT) | ||
| (INCLUDES ROLLERS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24210943
155-5959: SUSPENSION GP-SEAT
155-5959 SUSPENSION GP-SEAT -AIR
S/N 4XM1-UP
PART OF 154-5732 SEAT GP-SUSPENSION
AN ATTACHMENT
S/N 4XM1-UP
PART OF 154-5732 SEAT GP-SUSPENSION
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-4818 | [4] | LOCKWASHER | |
| 2. | 102-6317 | [4] | BUMPER | |
| 3. | 123-8157 | [2] | SHAFT | |
| 4. | 128-0686 | [2] | SPACER (9.78X15.88X27.8-MM THK) | |
| 5. | 128-5082 | [1] | BOOT | |
| 6. | 128-5084 | [1] | ABSORBER AS-SHOCK | |
| 7. | 128-5085 | [1] | KNOB-DAMPER (SEAT) | |
| 8. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 9. | 147-4549 | [2] | FITTING-ELBOW | |
| 10. | 147-6522 | [1] | SPRING | |
| 11. | 148-3749 | [1] | SCISSORS AS | |
| 12. | 149-2400 | [1] | FITTING | |
| 13. | 149-2402 | [1] | VALVE AS (SEAT) | |
| 14. | 158-3198 | [1] | HOUSING AS | |
| 15. | 160-3662 | [2] | FITTING-BULKHEAD | |
| 16. | 160-7765 B | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 17. | 160-7766 B | [6] | WASHER (16.26X22.23X0.51-MM THK) | |
| 18. | 160-7767 B | [6] | WASHER (3.68X12.57X0.51-MM THK) | |
| 19. | 166-7224 | [1] | HOUSING AS | |
| 20. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 21. | 2K-4973 | [3] | LOCKNUT (3/8-16-THD) | |
| 22. | 4V-7884 | [2] | BEARING | |
| 23. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 24. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 25. | 7X-7739 | [1] | WASHER (9.7X25.4 X4-MM THK) | |
| 26. | 8L-8413 | [3] | STRAP-CABLE (WHITE) | |
| 27. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 28. | 8T-2501 | [2] | BOLT (3/8-16X2-IN) | |
| 29. | 147-6541 BE | TUBE (146CM) | ||
| 4F-4879 F | [1] | BOLT (3/8-16X0.5-IN) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-6928 | [1] | KIT-FASTENER (SEAT) | ||
| (INCLUDES CLIPS-RACHET) | ||||
| 123-9128 | [1] | KIT-ROLLER (SEAT) | ||
| (INCLUDES BEARINGS, ROLLERS, TIE WRAP) | ||||
| 128-0613 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 132-3439 | [1] | KIT-INDICATOR (SEAT) | ||
| (INCLUDES MAGNET, CAM, INDICATOR, NUT, SPRING, LABEL) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP24210944
273-2820: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 101-0003 | [26] | FASTENER | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 8. | 192-7752 | [4] | SHAFT AS | |
| 9. | 192-7760 | [1] | SHAFT | |
| 10. | 192-7767 | [1] | SCISSORS AS | |
| 11. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 12. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 13. | 192-7795 | [1] | BOOT | |
| 14. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 15. | 192-7812 J | [1] | BOLT-SPECIAL | |
| 16. | 192-7820 | [3] | BUMPER | |
| 17. | 192-7822 | [1] | SHAFT | |
| 18. | 237-3943 | [1] | BRACKET | |
| 19. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 20. | 273-3356 | [1] | HOUSING AS | |
| 21. | 273-3357 | [1] | HOUSING AS | |
| 22. | 1H-8296 | [1] | SCREW-MACHINE (3/8-16X0.52-IN) | |
| 23. | 2K-4973 J | [8] | LOCKNUT (3/8-16-THD) | |
| 24. | 3J-4818 J | [1] | LOCKWASHER | |
| 25. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 26. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 27. | 211-5358 E | CONDUIT-FLEXIBLE (70-CM) | ||
| 27A. | 211-5358 E | CONDUIT-FLEXIBLE (30-CM) | ||
| 28. | 5P-6010 D | TUBE (0.31-M) | ||
| 28A. | 5P-6010 D | TUBE (0.05-M) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 243-5692 | [1] | KIT-AIR VALVE (SUSPENSION SEAT) | ||
| (INCLUDES FITTINGS, LOCKWASHER, KNOB AS & NUT) | ||||
| 212-7779 J | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES STRAP CABLE, SPRING, CLAMP, ADJUSTERS, BOLT, BEARINGS, WASHERS, SHOCK ABSORBER, BRACKET, KIT-PULLEY,CABLE AS, | ||||
| KNOB, LOCKNUT & BALL) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM, HOUSING & LOCKNUTS) | ||||
| 211-9294 | [1] | KIT-TETHER | ||
| (INCLUDES TETHERS) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24210945
8X-2650: VALVE GP-AIR CONTROL
8X-2650 VALVE GP-AIR CONTROL
S/N 4XM1-UP
PART OF 8W-7490 CONTROL GP-SERVICE BRAKE
S/N 4XM1-UP
PART OF 8W-7490 CONTROL GP-SERVICE BRAKE
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-2646 | [1] | LEVER AS | |
| 2. | 9D-8121 | [1] | ROLLER | |
| 3. | 3B-4607 | [1] | PIN-COTTER | |
| 7B-9323 | [1] | PIN | ||
| 4. | 5D-3636 | [1] | BOOT | |
| 5. | 2R-0719 | [1] | PLUNGER | |
| 6. | 125-5321 | [3] | BOLT | |
| 7. | 2R-0694 | [1] | PLATE-BRAKE VALVE | |
| 8. | 2R-0724 | [1] | BUTTON-STOP | |
| 9. | 2D-6006 | [1] | PIN | |
| 10. | 3B-4610 | [1] | PIN-COTTER | |
| 11. | 8W-5651 | [1] | VALVE GP-CONTROL (SERVICE BRAKE) | |
| 5D-0768 | [1] | SPRING | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 2G-6285 | [1] | KIT-AIR CONTROL VALVE (SERVICE BRAKE) | ||
| (INCLUDES SPRINGS, INLET & EXHAUST VALVES, 0-RINGS, BOOT,SCREW, LOCKNUT & FILTER) | ||||
#SEBP24210946
239-8395: WASHER GP-WINDOW
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5470 | [2] | PUMP AS-WASHER | |
| 2. | 3E-6088 | [2] | BRACKET | |
| 3. | 9D-6896 | [2] | STRAINER (WINDOW WASHER) | |
| 4. | 239-8397 | [1] | RESERVOIR AS | |
| 4A. | 8E-8292 | [1] | CAP-VENTED (WINDOW WASHER) | |
| 5. | 5P-8439 | [2] | GROMMET | |
| 6. | 7K-3434 | [4] | SCREW-TAPPING (6-20X0.75-IN) | |
| 7. | 144-0195 E | HOSE (41-CM) | ||
| 7A. | 144-0195 E | HOSE (44-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24210947
239-8396: WASHER GP-WINDOW
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5470 | [1] | PUMP AS-WASHER | |
| 2. | 3E-6088 | [1] | BRACKET | |
| 3. | 9D-6896 | [1] | STRAINER (WINDOW WASHER) | |
| 4. | 239-8397 | [1] | RESERVOIR AS | |
| 8E-8292 | [1] | CAP-VENTED (WINDOW WASHER) | ||
| 5. | 5P-8439 | [1] | GROMMET | |
| 6. | 7K-3434 | [4] | SCREW-TAPPING (6-20X0.75-IN) | |
| 7. | 123-0437 | [1] | PLUG-BUTTON | |
| 8. | 144-0195 E | HOSE (44-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24210948
8X-9675: WASHER GP-WINDOW
8X-9675 WASHER GP-WINDOW -FRONT
S/N 4XM1-UP
PART OF 8W-7417, 8W-7418 ROPS AR
ALSO AN ATTACHMENT
S/N 4XM1-UP
PART OF 8W-7417, 8W-7418 ROPS AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0195 E | HOSE (250-CM EACH) | ||
| 1A. | 144-0195 E | HOSE (40-CM EACH) | ||
| 2. | 8W-0935 | [1] | GASKET | |
| 3. | 8W-0934 | [1] | BRACKET | |
| 4. | 9P-2369 | [1] | JET AS-WASHER | |
| 8Y-4408 | [1] | NOZZLE AS-JET | ||
| 5. | 8T-2901 | [1] | NOZZLE AS | |
| 8Y-4409 | [1] | NOZZLE AS-JET | ||
| 7. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 8. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 9. | 3S-2093 | [3] | STRAP-CABLE | |
| 10. | 102-3645 | [1] | COVER | |
| 11. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 4D-7388 | [2] | CLIP (LOOP) | |
| 13. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 14. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 7T-8891 | [2] | PUMP AS-WASHER (24-VOLT) | |
| 16. | 8X-9405 | [1] | TANK GP-WINDOW WASHER | |
| 17. | 261-3345 | [2] | CONNECTOR | |
| 18. | 6W-5698 | [2] | GROMMET | |
| 19. | 7T-1961 | [1] | CAP | |
| 20. | 8X-1135 | [1] | GASKET | |
| 21. | 8X-9349 | [1] | PAD | |
| 22. | 107-4865 | [1] | PAD | |
| 24. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 25. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 26. | 7G-4326 | [1] | PLATE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP24210949
8X-9680: WASHER GP-WINDOW
8X-9680 WASHER GP-WINDOW -REAR
S/N 4XM1-UP
PART OF 155-7450, 155-7451 WIPER AR-WINDOW
AN ATTACHMENT
S/N 4XM1-UP
PART OF 155-7450, 155-7451 WIPER AR-WINDOW
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-3816 | [1] | NOZZLE AS | |
| 8Y-4408 | [1] | NOZZLE AS-JET | ||
| 2. | 7T-8891 | [1] | PUMP AS-WASHER (24-VOLT) | |
| 3. | 4D-7388 | [1] | CLIP (LOOP) | |
| 4. | 4D-7794 | [4] | CLIP | |
| 5. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 6. | 6K-9632 | [1] | TEE | |
| 7. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 9. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 144-0195 E | HOSE (188-CM) | ||
| 10A. | 144-0195 E | HOSE (20-CM) | ||
| 10B. | 144-0195 E | HOSE (10-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
