AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J-7024 RIPPER GP S/N 2LR1-UP 3-TEETH PART OF 9W-7603 RIPPER AR Type 3 AN ATTACHMENT 12H ES MOTOR GRADER


WORK TOOLS
RIPPER GP
SCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL
CHARTS & FILMS
GASKET & SEAL KITS

MOTOR GRADER 12H ES MOTOR GRADER 2LR
 12H Motor Grader 2LR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2423 12H ES 2LR   (1996)

WORK TOOLS

RIPPER GP
MOUNTING GP-RIPPER
9W-7467 MOUNTING GP-RIPPER
9W-7603 RIPPER AR
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
 

#SEBP24230880
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 2LR1-UP
3-TEETH
PART OF 9W-7603 RIPPER AR
Type 3
AN ATTACHMENT
i01473128 SEBP2423
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
11. 187-0953 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24230881
 

108-1104: SCARIFIER AR

108-1104 SCARIFIER AR -VEE TYPE
S/N 2LR1-UP
AN ATTACHMENT
i00123088 SEBP2423
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  116-0379 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  8X-6070 Y [1] LINES GP-HYDRAULIC (SCARIFIER)  
  8X-6080 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24230882
 

8X-6080: SCARIFIER GP

8X-6080 SCARIFIER GP -VEE TYPE
S/N 2LR1-UP
11-TEETH
PART OF 108-1104 SCARIFIER AR
Type 1
AN ATTACHMENT
i00122762 SEBP2423
8X6080 SCARIFIER GP Parts scheme 8X6080 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0224 [2] BOLT (7/8-14X3.5-IN)  
2. 1B-4208 [2] NUT-FULL (7/8-14-THD)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 2H-3746 [4] BOLT (1-14X5-IN)  
5. 2K-7471 [4] LOCKNUT (1-14-THD)  
6. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
7. 3D-4904 [4] LOCKNUT (1-1/8-12-THD)  
8. 4D-6086 [2] KEY  
9. 5B-0577 [2] COLLAR  
10. 5D-8159 [2] PIN AS  
11. 5K-1458 [11] GROMMET  
12. 5K-1459 [11] LOCK PIN  
13. 6B-3260 [1] TOOL  
14. 6F-6992 [4] CAP-BALL SOCKET  
15. 6Y-5230 [11] TOOTH-SCARIFIER  
16. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
17. 7F-1327 B [32] SHIM (0.03-IN THK)  
18. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
19. 8H-4040 [4] BOLT (1-1/8-12X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
25. 118-7881 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
26. 195-7218 [11] SHANK  
27. 198-9811 B [4] SPACER (83X145X3-MM THK)  
28. 198-9812 B [2] SPACER (83X145X2-MM THK)  
29. 1A-8063 [8] BOLT (3/4-10X2.5-IN)  
30. 1D-4612 [4] BOLT (3/4-10X4-IN)  
31. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
32. 2G-7309 [1] SHAFT  
33. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
34. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 5P-8250 [8] WASHER (28X49X5-MM THK)  
39. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 8X-3663 [8] WASHER (20X45X12-MM THK)  
43. 9X-8875 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP24230883
 

8X-6080: SCARIFIER GP

8X-6080 SCARIFIER GP -VEE TYPE
S/N 2LR1-UP
11-TEETH
PART OF 108-1104 SCARIFIER AR
Type 2
AN ATTACHMENT
i04553767 SEBP2423
8X6080 SCARIFIER GP Parts scheme 8X6080 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0224 [2] BOLT (7/8-14X3.5-IN)  
2. 1B-4208 [2] NUT-FULL (7/8-14-THD)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 2H-3746 [4] BOLT (1-14X5-IN)  
5. 2K-7471 [4] LOCKNUT (1-14-THD)  
6. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
7. 3D-4904 [4] LOCKNUT (1-1/8-12-THD)  
8. 4D-6086 [2] KEY  
9. 5B-0577 [2] COLLAR  
10. 5D-8159 [2] PIN AS  
11. 5K-1458 [11] GROMMET  
12. 5K-1459 [11] LOCK PIN  
13. 6B-3260 [1] TOOL  
14. 6F-6992 [4] CAP-BALL SOCKET  
15. 6Y-5230 [11] TOOTH-SCARIFIER  
16. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
17. 7F-1327 B [32] SHIM (0.03-IN THK)  
18. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
19. 8H-4040 [4] BOLT (1-1/8-12X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
25. 118-7881 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
26. 195-7218 [11] SHANK  
27. 198-9811 B [4] SPACER (83X145X3-MM THK)  
28. 198-9812 B [2] SPACER (83X145X2-MM THK)  
29. 1A-8063 [8] BOLT (3/4-10X2.5-IN)  
30. 1D-4612 [4] BOLT (3/4-10X4-IN)  
31. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
34. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 5P-8250 [8] WASHER (28X49X5-MM THK)  
39. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 8X-3663 [8] WASHER (20X45X12-MM THK)  
43. 9X-8875 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP24230884
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N 2LR1-UP
PART OF 8J-7024 RIPPER GP
AN ATTACHMENT
i00122453 SEBP2423
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER  
6. 114-0359 [1] RETAINER AS  
 

#SEBP24230885
 

4K-3330: TOOTH GP-SCARIFIER

4K-3330 TOOTH GP-SCARIFIER
S/N 2LR1-UP
9-TEETH
AN ATTACHMENT
i00122069 SEBP2423
4K3330 TOOTH GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1459 [9] LOCK PIN  
2. 5K-1458 [9] GROMMET  
3. 195-7218 [9] SHANK  
4. 6Y-5230 [9] TOOTH-SCARIFIER  
  6B-3260 F [1] TOOL  
  F   NOT SHOWN
 

#SEBP24230886
 

111-1719: BOX GP-TOOL

111-1719 BOX GP-TOOL
S/N 2LR1-UP
12-FT
PART OF 123-4037 CHASSIS AR
i00123165 SEBP2423
1111719 BOX GP-TOOL Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-7249 [1] TOOL BOX  
2. 5P-8502 [1] PADLOCK GP  
  5P-8500 [1] KEY  
  8Y-6364 [1] SLEEVE  
3. 5K-9107 [4] BOLT-LOCKING (3/8-16X0.75-IN)  
4. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP24230887
 

339-6231: FILM GP

339-6231 FILM GP
S/N R6J1-UP
PART OF 124-4203, 146-4341 ENGINE AR
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD
i03751586 SEBP2423
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7E-8050 [1] FILM GP (EPA CERTIFICATION)  
    INSTALL ON TOP OF VALVE COVER TOWARDS FRONT OF ENGINE READABLE FROM RIGHT HAND SIDE OF ENGINE IF POSSIBLE,
    OR LEFT HAND SIDE OF BLOCK JUST ABOVE ENGINE INFO LABEL.
    INSTALL LAMINANT ON TOP OF FILM.
  115-5852 [1] PLATE & FILM GP (ENGINE INFORMATION)  
    INSTALL ON LEFT HAND REAR SIDE OF BLOCK.
    INSTALL LAMINANT OVER SILVER FILM.
  3N-3790 [1] PLATE-SERIAL NUMBER (ENGINE)  
    INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON CAST PAD ON UPPER LEFT HAND SIDE OF CYLINDER BLOCK.
    STAMP SERIAL NUMBER IN CYLINDER BLOCK JUST BELOW SERIAL NUMBER PLATE IN CHARACTERS SIZE 6 MM HIGH.
  274-7398 [1] TAG-INFORMATION (CRANKCASE, NO OIL)  
    INSTALL 'NO OIL' TAG AS REQUIRED ON ENGINES SHIPPED WITHOUT OIL IN THE CRANKCASE.
    ATTACH WITH WIRE TO OIL GAGE RING HANDLE, OR ONTO OIL FILLER CAP T-HANDLE, NECESSARY TO BE EASILY VISIBLE ON ENGINE.
 

#SEBP24230888
 

130-1455: KIT-GASKET

130-1455 KIT-GASKET
S/N 6NC1-UP; R6J1-UP
FUEL SYSTEM
FIELD INSTALLATION
i07576479 SEBP2423
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  6I-2002 [1] GASKET  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  8X-2952 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  1V-6341 [1] SEAL  
  9L-9098 [6] SEAL-CARBON STOP  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [2] SEAL-LIP TYPE  
  2J-0157 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  3D-2898 [1] SEAL-O-RING  
  3J-1907 [5] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  3K-0360 [3] SEAL-O-RING  
  4J-5477 [2] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  4M-8303 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8215 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6F-6672 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  6J-2419 [1] SEAL-O-RING  
  6V-8397 [4] SEAL-O-RING  
  7F-8607 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  175-7900 [1] SEAL-O-RING  
  196-1804 [1] SEAL-O-RING  
  317-0808 [1] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  8H-2778 [1] SEAL-RING  
  271-2489 [6] SEAL-WASHER  
  7W-4486 [6] WASHER (9.76X17.14X1.8-MM THK)  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP24230889
 

281-8870: KIT-GASKET

281-8870 KIT-GASKET
S/N 2LR1-UP
KIT CONTAINS SEALS, (EXCEPT METAL SEAL RINGS), GASKETS AND BENDABLE LOCKS TO RESEAL THE COMPLETE POWER SHIFT. TRANSMISSION ARRANGEMENT. IT ALSO CONTAINS SEALS AND GASKETS TO ATTACH VALVES, FILL TUBE AND DIPSTICK THAT ARE REMOVED. WITH THE TRANSMISSION. IT HAS TRANSMISSION MOUNTING SEALS AND GASKETS.
FOR USE WITH @@@@@ 9W-7115@@@@@
FIELD INSTALLATION
i06249962 SEBP2423
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8B-1615 [1] GASKET  
  145-8039 [3] LOCK  
  265-5287 [1] RING-SEAL  
  7G-4822 [12] RING-SEAL  
  8E-5742 [8] RING-SEAL (INTERNAL)  
  9W-9371 [3] RING-SEAL  
  8E-5734 [4] RING-SEAL EXTENSION  
  8E-5736 [2] RING-SEAL EXTENSION  
  203-5957 [1] SEAL  
  203-5958 [1] SEAL  
  278-0642 [1] SEAL-LIP TYPE  
  9X-7743 [1] SEAL-LIP TYPE  
  2D-8009 [3] SEAL-O-RING  
  2J-0157 [1] SEAL-O-RING  
  2J-6274 [1] SEAL-O-RING  
  2M-9780 [7] SEAL-O-RING  
  3D-4245 [8] SEAL-O-RING  
  3J-1907 [15] SEAL-O-RING  
  3J-7354 [3] SEAL-O-RING  
  3K-0360 [7] SEAL-O-RING  
  4D-6695 [4] SEAL-O-RING  
  4F-7390 [1] SEAL-O-RING  
  4F-7952 [1] SEAL-O-RING  
  4H-9105 [1] SEAL-O-RING  
  4J-2506 [2] SEAL-O-RING  
  4J-7533 [8] SEAL-O-RING  
  4K-2039 [9] SEAL-O-RING  
  4S-5879 [1] SEAL-O-RING  
  5F-8000 [1] SEAL-O-RING  
  5F-9144 [9] SEAL-O-RING  
  5J-1086 [1] SEAL-O-RING  
  5M-6200 [1] SEAL-O-RING  
  5P-3863 [6] SEAL-O-RING  
  6F-4855 [8] SEAL-O-RING  
  6L-1650 [1] SEAL-O-RING  
  7F-8268 [1] SEAL-O-RING  
  7M-8485 [16] SEAL-O-RING  
  8F-3469 [14] SEAL-O-RING  
  8F-6230 [1] SEAL-O-RING  
  8M-4992 [1] SEAL-O-RING  
  9X-4609 [2] SEAL-O-RING  
  118-5068 [1] SEAL-O-RING  
  228-7467 [1] SEAL-WIPER  
  6Y-5010 [8] WASHER (10.16X19X0.84-MM THK)  
  9P-9150 [70] WASHER (8.25X18X0.84-MM THK)  
   
  476-2738 [8] KIT-SEAL  
    (EACH INCLUDES)
  8L-2786 [1] SEAL-O-RING  
  317-0808 [1] SEAL-O-RING  
  464-0509 [1] SEAL-O-RING  
 

Information:

Caterpillar Parts SIS Catalog 12H ES :

RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
9W-7603 RIPPER AR
MOUNTING GP-RIPPER
9W-7467 MOUNTING GP-RIPPER
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
195-7265 EDGE GP-CUTTING
108-1104 SCARIFIER AR
SCARIFIER GP
8X-6080 SCARIFIER GP
SCARIFIER GP
8X-6080 SCARIFIER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
BOX GP-TOOL
111-1719 BOX GP-TOOL
339-6231 FILM GP
130-1455 KIT-GASKET

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.