AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

124-4196 VALVE & LINKAGE GP -BANK 4-RH-LH-EU S/N 7WJ1-UP Type 2 AN ATTACHMENT 14H NA MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP

MOTOR GRADER 14H NA MOTOR GRADER 7WJ
 14H Motor Grader 7WJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2424 14H NA 7WJ   (1995)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
107-9662 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4196 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4196 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
 

#SEBP24240540
 

124-4196: VALVE & LINKAGE GP

124-4196 VALVE & LINKAGE GP -BANK 4-RH-LH-EU
S/N 7WJ1-UP
Type 2
AN ATTACHMENT
i00123722 SEBP2424
1244196 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3128 YC [1] VALVE GP-BANK 4 (RH)  
2. 130-3125 YC [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 7H-3641 [16] END-ROD (5/16-24-THD)  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [1] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5633 [1] LEVER (SIDE SHIFT)  
42. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
43. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240541
 

124-4197: VALVE & LINKAGE GP

124-4197 VALVE & LINKAGE GP -BANK 4 RH-BANK 5 LH-EU
S/N 7WJ1-UP
PART OF 124-4201 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i00123724 SEBP2424
1244197 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3339 Y [1] VALVE GP-BANK 4  
2. 124-3337 Y [1] VALVE GP-BANK 5  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (BLADE LIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
7. 7H-3641 [18] END-ROD (5/16-24-THD)  
8. 8X-4276 [9] ROD  
9. 8X-4279 [2] SPACER (84-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 9D-2804 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
42. 101-2457 [1] LEVER (ARTICULATION)  
43. 8D-5634 [1] LEVER (CENTER SHIFT)  
44. 8D-5633 [1] LEVER (WHEEL LEAN)  
45. 8D-5632 [1] LEVER (BLADE LIFT)  
46. 8D-5633 [1] LEVER (SIDE SHIFT)  
47. 101-2458 [1] LEVER (BLADE TIP)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240542
 

124-4197: VALVE & LINKAGE GP

124-4197 VALVE & LINKAGE GP -BANK 4 RH-BANK 5 LH-EU
S/N 7WJ1-UP
PART OF 124-4201 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
i00123725 SEBP2424
1244197 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3126 YC [1] VALVE GP-BANK 5 (LH)  
24. 130-3128 YC [1] VALVE GP-BANK 4 (RH)  
25. 2G-6740 [1] KNOB-RIPPER  
26. 2G-6747 [1] KNOB-BLADE TIP  
27. 2G-6748 [1] KNOB-BLADE LIFT  
28. 2G-6749 [1] KNOB-SIDESHIFT  
29. 2G-6751 [1] KNOB-CIRCLE DRIVE  
30. 2G-6752 [1] KNOB-ARTICULATION  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240543
 

124-4198: VALVE & LINKAGE GP

124-4198 VALVE & LINKAGE GP -BANK 5-LH-RH-EU
S/N 7WJ1-UP
PART OF 124-4202 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i00123726 SEBP2424
1244198 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3340 Y [1] VALVE GP-BANK 5  
2. 124-3337 Y [1] VALVE GP-BANK 5  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (BLADE LIFT)  
6. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
7. 8W-0456 [1] SHAFT  
8. 8X-4276 [10] ROD  
  6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
9. 8D-5633 [1] LEVER (SIDE SHIFT)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 8X-4279 [2] SPACER (84-MM THK)  
12. 8D-5640 [12] BEARING  
13. 8D-5636 B SHIM (0.254-MM THK)  
14. 8D-5637 B SHIM (0.762-MM THK)  
15. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [20] LOCKWASHER  
18. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [10] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
33. 104-7740 [1] PLATE AS (LH)  
34. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCLS)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
35. 104-7429 [2] PLATE  
36. 9D-2804 [1] SHAFT  
37. 2G-6740 [1] KNOB-RIPPER  
38. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
44. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
45. 101-2457 [1] LEVER (ARTICULATION)  
46. 8D-5634 [1] LEVER (CENTER SHIFT)  
47. 8D-5633 [1] LEVER (WHEEL LEAN)  
48. 101-2458 [1] LEVER (PLOW & BULLDOZER)  
49. 8D-5632 [1] LEVER (BLADE LIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240544
 

124-4198: VALVE & LINKAGE GP

124-4198 VALVE & LINKAGE GP -BANK 5-LH-RH-EU
S/N 7WJ1-UP
PART OF 124-4202 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
i00123727 SEBP2424
1244198 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [10] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [12] BEARING  
11. 8D-5641 [10] BEARING  
12. 8L-8598 [10] ROD END  
13. 8W-0456 [1] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 146-0705 [10] ROD  
24. 130-3126 CY [1] VALVE GP-BANK 5 (LH)  
25. 130-3132 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8186 [10] NUT-FULL (5/16-24-THD)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
47. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240545
 

124-4200: VALVE & LINKAGE GP

124-4200 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-EU
S/N 7WJ1-UP
PART OF 124-4208 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i00123728 SEBP2424
1244200 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3340 Y [1] VALVE GP-BANK 5  
2. 124-3338 Y [1] VALVE GP-BANK 7  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER (ARTICULATION)  
5. 8D-5634 [2] LEVER (CENTER SHIFT)  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4276 [12] ROD  
  6V-8186 [24] NUT-FULL (5/16-24-THD)  
  7H-3641 [24] END-ROD (5/16-24-THD)  
8. 8D-5633 [2] LEVER (SIDESHIFT)  
9. 101-2458 [3] LEVER (PLOW DOZER)  
10. 8X-4279 [2] SPACER (84-MM THK)  
11. 8D-5640 [14] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [24] LOCKWASHER  
17. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
18. 8D-5641 [12] BEARING  
19. 2G-6757 [1] KNOB-BLADE LIFT  
20. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
21. 2G-6749 [1] KNOB-SIDESHIFT  
22. 2G-6747 [1] KNOB-BLADE TIP  
23. 8D-5632 [2] LEVER (CIRCLE DRIVE)  
24. 2G-6751 [1] KNOB-CIRCLE DRIVE  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6756 [1] KNOB-WHEEL LEAN  
27. 2G-6752 [1] KNOB-ARTICULATION  
28. 2G-6755 [1] KNOB-CENTERSHIFT  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 9M-1853 [6] MOUNTING  
31. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
32. 104-7740 [1] PLATE AS (LH)  
33. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCLS)
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
34. 104-7429 [2] PLATE  
35. 9D-2804 [1] SHAFT  
36. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [1] LEVER (WING TILT)  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [3] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240546
 

124-4200: VALVE & LINKAGE GP

124-4200 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-EU
S/N 7WJ1-UP
PART OF 124-4208 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
i00123729 SEBP2424
1244200 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [12] END-ROD (5/16-24-THD)  
5. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5A. 8D-5632 [1] LEVER (BLADE LIFT)  
6. 8D-5633 [1] LEVER (SIDE SHIFT)  
6A. 8D-5633 [1] LEVER (WHEEL LEAN)  
7. 8D-5634 [1] LEVER (BLADE LIFT)  
7A. 8D-5634 [1] LEVER (CENTERSHIFT)  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [14] BEARING  
11. 8D-5641 [12] BEARING  
12. 8L-8598 [12] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (WING LIFT)  
16A. 101-2458 [1] LEVER (BLADE TIP)  
16B. 101-2458 [1] LEVER (PLOW/DOZER LIFT)  
17. 103-1597 [1] LEVER (WING TILT)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4517 [1] SHAFT  
23. 146-0705 [12] ROD  
24. 130-3127 CY [1] VALVE GP-BANK 7 (LH)  
25. 130-3132 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
48. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240547
 

144-4004: VALVE & LINKAGE GP

144-4004 VALVE & LINKAGE GP -BANK 5 RH-BANK 7 LH-WING TILT FLOAT
S/N 7WJ1-UP
AN ATTACHMENT
i01429152 SEBP2424
1444004 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8675 Y [1] VALVE GP-BANK 5 (RH)  
2. 4Z-6358 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4276 [12] ROD  
  6V-8186 [24] NUT-FULL (5/16-24-THD)  
  7H-3641 [24] END-ROD (5/16-24-THD)  
8. 8D-5633 [2] LEVER  
9. 101-2458 [3] LEVER  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [14] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [24] LOCKWASHER  
17. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
18. 8D-5641 [12] BEARING  
19. 2G-6757 [1] KNOB-BLADE LIFT  
20. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
21. 2G-6749 [1] KNOB-SIDESHIFT  
22. 2G-6747 [1] KNOB-BLADE TIP  
23. 8D-5632 [2] LEVER  
24. 2G-6751 [1] KNOB-CIRCLE DRIVE  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6756 [1] KNOB-WHEEL LEAN  
27. 2G-6752 [1] KNOB-ARTICULATION  
28. 2G-6755 [1] KNOB-CENTERSHIFT  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 9M-1853 [6] MOUNTING  
31. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
32. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
33. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [1] LEVER  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [3] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240548
 

254-0240: VALVE & LINKAGE GP

254-0240 VALVE & LINKAGE GP
S/N 7WJ1-UP
PART OF 254-0215 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02223587 SEBP2424
2540240 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, LH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [14] BEARING  
10. 8D-5641 [12] BEARING  
11. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (RIPPER)  
14A. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
15A. 101-2458 [1] LEVER (WING LIFT)  
16. 103-1597 [1] LEVER (PLOW, DOZER)  
16A. 103-1597 [1] LEVER (WING TILT)  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4517 [1] SHAFT  
22. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
23. 244-2586 [1] TUBE AS  
24. 244-2590 [1] TUBE AS  
25. 244-2594 [1] TUBE AS  
26. 244-2598 [1] TUBE AS  
27. 254-1589 Y [1] VALVE GP-BANK 6 (LH)  
28. 254-1590 Y [1] VALVE GP-BANK 6 (RH)  
29. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6740 [1] KNOB-RIPPER  
32. 2G-6747 [1] KNOB-BLADE TIP  
33. 2G-6748 [1] KNOB-BLADE LIFT  
34. 2G-6749 [1] KNOB-SIDESHIFT  
35. 2G-6751 [1] KNOB-CIRCLE DRIVE  
36. 2G-6752 [1] KNOB-ARTICULATION  
37. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
38. 2G-6755 [1] KNOB-CENTERSHIFT  
39. 2G-6756 [1] KNOB-WHEEL LEAN  
40. 2G-6757 [1] KNOB-BLADE LIFT  
41. 2G-7107 [1] KNOB-WING LIFT  
42. 2G-7108 [1] KNOB-WING TILT  
43. 3J-1907 [4] SEAL-O-RING  
44. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
45. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
46. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
47. 6V-8188 [2] NUT (1/2-13-THD)  
48. 6V-8397 [8] SEAL-O-RING  
49. 6V-9836 [2] TEE-SWIVEL  
50. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
51. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
53. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
54. 8T-9041 [4] CONNECTOR  
55. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
56. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240549
 

254-0242: VALVE & LINKAGE GP

254-0242 VALVE & LINKAGE GP
S/N 7WJ1-UP
PART OF 254-0217 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02223521 SEBP2424
2540242 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [26] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [15] BEARING  
10. 8D-5641 [13] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [13] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (WING LIFT)  
16B. 101-2458 [1] LEVER (PLOW, DOZER)  
17. 103-1597 [1] LEVER (WING TILT)  
17A. 103-1597 [1] LEVER (PLOW, BULLDOZER ANGLE)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4517 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
24. 244-2587 [1] TUBE AS  
25. 244-2591 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 254-1579 Y [1] VALVE GP-BANK 7 (LH)  
29. 254-1587 Y [1] VALVE GP-BANK 6 (RH)  
30. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6740 [1] KNOB-RIPPER  
34. 2G-6747 [1] KNOB-BLADE TIP  
35. 2G-6748 [1] KNOB-BLADE LIFT  
36. 2G-6749 [1] KNOB-SIDESHIFT  
37. 2G-6751 [1] KNOB-CIRCLE DRIVE  
38. 2G-6752 [1] KNOB-ARTICULATION  
39. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
40. 2G-6755 [1] KNOB-CENTERSHIFT  
41. 2G-6756 [1] KNOB-WHEEL LEAN  
42. 2G-6757 [1] KNOB-BLADE LIFT  
43. 2G-7107 [1] KNOB-WING LIFT  
44. 2G-7108 [1] KNOB-WING TILT  
45. 3J-1907 [4] SEAL-O-RING  
46. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
47. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
48. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
49. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
50. 6V-8188 [2] NUT (1/2-13-THD)  
51. 6V-8397 [8] SEAL-O-RING  
52. 6V-9836 [2] TEE-SWIVEL  
53. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
54. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
55. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
56. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
57. 8T-9041 [4] CONNECTOR  
58. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
59. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 14H NA :

VALVE & LINKAGE GP
124-4196 VALVE & LINKAGE GP
VALVE & LINKAGE GP
107-9662 VALVE & LINKAGE GP
TANK & MTG GP-HYDRAULIC
8X-5290 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-5290 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
6E-2815 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
6E-2815 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4200 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4200 VALVE & LINKAGE GP
VALVE & LINKAGE GP
144-4004 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0240 VALVE & LINKAGE GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.