7I-4870 VALVE & LINKAGE GP -BANK 5-LH-RH S/N 7WJ1-UP PART OF 7I-4869 CONTROL AR-HYDRAULIC AN ATTACHMENT 14H NA



HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 14H NA MOTOR GRADER 7WJ
 14H Motor Grader 7WJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2424 14H NA 7WJ   (1995)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0240 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0242 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4870 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4871 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8X-5490 VALVE & LINKAGE GP
 

#SEBP24240550
 

7I-4870: VALVE & LINKAGE GP

7I-4870 VALVE & LINKAGE GP -BANK 5-LH-RH
S/N 7WJ1-UP
PART OF 7I-4869 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00640358 SEBP2424
7I4870 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 104-8675 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8654 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
7. 8W-0456 [1] SHAFT  
8. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
  8X-4276 [1] ROD  
9. 8D-5633 [2] LEVER  
10. 101-2458 [2] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [12] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [20] LOCKWASHER  
18. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [10] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
33. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
34. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
35. 104-7429 [2] PLATE  
36. 137-4516 [1] SHAFT  
37. 2G-6740 [1] KNOB-RIPPER  
38. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240551
 

7I-4871: VALVE & LINKAGE GP

7I-4871 VALVE & LINKAGE GP -BANK 4 RH-BANK 5 LH
S/N 7WJ1-UP
PART OF 7I-4868 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00122369 SEBP2424
7I4871 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 104-8674 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8654 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
  8X-4276 [1] ROD  
7. 8D-5633 [2] LEVER  
8. 101-2458 [1] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240552
 

8X-5490: VALVE & LINKAGE GP

8X-5490 VALVE & LINKAGE GP -BANK 4-RH, LH
S/N 7WJ1-UP
PART OF 8X-5480 BLADE AR
i00122757 SEBP2424
8X5490 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 104-8674 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8653 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [2] LEVER  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
8. 8X-4277 [8] ROD AS  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
9. 8D-5633 [2] LEVER  
10. 101-2458 [1] LEVER  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [10] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [16] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [8] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 6V-8188 [2] NUT (1/2-13-THD)  
33. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 137-4516 [1] SHAFT  
38. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
39. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [4] NUT-WELD (1/2-13-THD)  
40. 104-7429 [2] PLATE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240553
 

104-8653: VALVE GP-BANK 4

104-8653 VALVE GP-BANK 4 -LH
S/N 7WJ1-UP
PART OF 8X-5490 VALVE & LINKAGE GP
i00122969 SEBP2424
1048653 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)(BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)(CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)(SIDE SHIFT)  
8. 107-0557 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240554
 

104-8674: VALVE GP-BANK 4

104-8674 VALVE GP-BANK 4 -RH
S/N 7WJ1-UP
PART OF 7I-4871, 8X-5490 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00122974 SEBP2424
1048674 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0560 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 107-0561 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 107-0564 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 101-9346 [1] COVER  
11. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
12. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240555
 

124-3336: VALVE GP-BANK 4

124-3336 VALVE GP-BANK 4
S/N 7WJ1-UP
PART OF 124-4196 VALVE & LINKAGE GP
AN ATTACHMENT
i00123706 SEBP2424
1243336 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)(BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)(CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)(SIDE SHIFT)  
8. 124-3332 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 4J-7533 [1] SEAL-O-RING  
12. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240556
 

124-3339: VALVE GP-BANK 4

124-3339 VALVE GP-BANK 4
S/N 7WJ1-UP
PART OF 124-4196, 124-4197 VALVE & LINKAGE GP
AN ATTACHMENT
i00123709 SEBP2424
1243339 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0560 Y [1] VALVE GP-CONTROL (ARTICULATION)(ARTICULATION)  
6. 107-0561 Y [1] VALVE GP-CONTROL (CENTERSHIFT)(CENTER SHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-3333 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 4J-7533 [1] SEAL-O-RING  
12. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240557
 

130-3125: VALVE GP-BANK 4

130-3125 VALVE GP-BANK 4 -LH-EU
S/N 7WJ1-UP
PART OF 124-4196 VALVE & LINKAGE GP
AN ATTACHMENT
i00123850 SEBP2424
1303125 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)(BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)(CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)(SIDE SHIFT)  
8. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 130-3113 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
12. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240558
 

130-3128: VALVE GP-BANK 4

130-3128 VALVE GP-BANK 4 -RH-EU
S/N 7WJ1-UP
PART OF 124-4196, 124-4197 VALVE & LINKAGE GP
AN ATTACHMENT
i00123853 SEBP2424
1303128 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 107-0560 Y [1] VALVE GP-CONTROL (ARTICULATION)(ARTICULATION)  
6. 107-0561 Y [1] VALVE GP-CONTROL (CENTERSHIFT)(CENTER SHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 130-3112 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240559
 

104-8654: VALVE GP-BANK 5

104-8654 VALVE GP-BANK 5 -LH
S/N 7WJ1-UP
PART OF 7I-4870, 7I-4871 VALVE & LINKAGE GP
AN ATTACHMENT
i00122970 SEBP2424
1048654 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 107-0554 Y [1] VALVE GP-CONTROL (BLADE TILT)  
6. 107-0555 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 107-0556 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 107-0557 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0559 Y [1] VALVE GP-CONTROL (RIPPER)  
10. 101-9346 [1] COVER  
11. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 14H NA :

VALVE & LINKAGE GP
254-0242 VALVE & LINKAGE GP
VALVE & LINKAGE GP
254-0240 VALVE & LINKAGE GP
VALVE & LINKAGE GP
144-4004 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4200 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4200 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4198 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-4197 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4871 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8X-5490 VALVE & LINKAGE GP
VALVE GP-BANK 4
104-8653 VALVE GP-BANK 4
VALVE GP-BANK 4
104-8674 VALVE GP-BANK 4
VALVE GP-BANK 4
124-3336 VALVE GP-BANK 4
VALVE GP-BANK 4
124-3339 VALVE GP-BANK 4
VALVE GP-BANK 4
130-3125 VALVE GP-BANK 4
VALVE GP-BANK 4
130-3128 VALVE GP-BANK 4

Truck sale: