AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

265-6744 EXTENSION GP-BLADE -RH S/N 7WJ1-UP AN ATTACHMENT 14H NA MOTOR GRADER


WORK TOOLS
BLADE GP
RIPPER GP
SCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL

MOTOR GRADER 14H NA MOTOR GRADER 7WJ
 14H Motor Grader 7WJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2424 14H NA 7WJ   (1995)

WORK TOOLS

BLADE GP
8X-5480 BLADE AR
BLADE GP
8W-8425 BLADE GP
BLADE GP
8W-8426 BLADE GP
EXTENSION GP-BLADE
265-6743 EXTENSION GP-BLADE
EXTENSION GP-BLADE
265-6744 EXTENSION GP-BLADE
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
 

#SEBP24240850
 

265-6744: EXTENSION GP-BLADE

265-6744 EXTENSION GP-BLADE -RH
S/N 7WJ1-UP
AN ATTACHMENT
i02303756 SEBP2424
2656744 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-2166 [1] EDGE-CUTTING  
2. 110-5334 [3] SPACER (3-MM THK)  
3. 133-7523 [1] EXTENSION  
4. 231-4731 [1] ANGLE AS (RH)  
5. 265-6745 [1] BLOCK  
6. 265-6747 [1] PLATE AS  
7. 1J-6762 [8] BOLT-PLOW (3/4-10X3-IN)  
8. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
9. 5F-8933 [2] BOLT-PLOW (3/4-10X3.75-IN)  
10. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
11. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
12. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP24240851
 

8D-5970: LIFT GP-BLADE

8D-5970 LIFT GP-BLADE
S/N 7WJ1-UP
PART OF 8X-5480 BLADE AR
i00122437 SEBP2424
8D5970 LIFT GP-BLADE Parts scheme 8D5970 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-3583 [2] LOCK  
2. 1D-4614 C [6] BOLT (3/4-10X5-IN)  
  5P-8248 C [12] WASHER-HARD (20X36.5X3.5-MM THK)  
  2J-3506 C [6] NUT-FULL (3/4-10-THD)  
3. 1A-1135 [4] BOLT (5/8-11X2-IN)  
4. 5P-8247 [12] WASHER-HARD (17X32X3.5-MM THK)  
5. 8D-4302 [2] LOCK  
6. 1A-5405 [4] BOLT (5/8-11X5-IN)  
7. 4K-0367 [4] NUT-FULL (5/8-11-THD)  
8. 8W-5955 C [1] ARM AS (LH)  
  8D-4137 [1] BUSHING  
  8D-4138 [1] BUSHING  
9. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
10. 2G-3985 [1] PLATE  
11. 8D-4332 [2] PIN  
12. 8D-4316 [4] WASHER-THRUST (61.93X133.35X2.39-MM THK)  
  8D-4317 [10] WASHER (60.73X133.35X1.22-MM THK)  
  8D-4321 [10] WASHER (60.73X133.35X0.76-MM THK)  
13. 9D-6586 [1] SEAL-LIP TYPE  
14. 9D-1117 [1] BAR AS  
15. 9D-3334 [1] RING-RETAINING  
16. 9D-3312 [2] BUSHING  
17. 6G-3529 [1] STUD-BALL  
18. 8D-9652 [4] BEARING  
19. 3P-1461 [8] SEAL-LIP TYPE  
20. 8D-4235 [2] PIN  
21. 8D-4336 [8] WASHER-THRUST (76.6X146X1.90-MM THK)  
  8D-4337 [4] WASHER-THRUST (77.77X146.05X2.39-MM THK)  
22. 2G-5585 [2] YOKE AS  
    (EACH INCLUDES)
23. 2G-5584 [1] RING  
24. 8D-3308 [2] SEAL (PLASTIC)  
  5H-5672 [2] SEAL-O-RING (RUBBER)  
25. 8D-4204 [2] WASHER-THRUST (96.82X131.78X2.39-MM THK)  
  8D-4203 [4] WASHER-THRUST (3.77X5.25X0.08-MM THK)  
26. 8W-5954 C [1] ARM AS (RH)  
27. 8D-4138 [1] BUSHING  
28. 8D-4137 [1] BUSHING  
29. 8D-4207 [2] WASHER-THRUST (80.98X119.08X2.39-MM THK)  
  8D-4208 [4] WASHER-THRUST (3.14X4.72X0.08-MM THK)  
30. 8D-4217 [2] SEAL (PLASTIC)  
  1J-2859 [2] SEAL-O-RING (RUBBER)  
31. 8D-4198 [2] RETAINER  
32. 8D-4223 B [8] SHIM (0.127-MM THK)  
  8D-4224 B [6] SHIM (0.254-MM THK)  
  8D-4225 B [2] SHIM (0.508-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24240852
 

119-6240: MOUNTING GP-RIPPER

119-6240 MOUNTING GP-RIPPER
S/N 7WJ1-UP
PART OF 119-6239 RIPPER AR
AN ATTACHMENT
i00123603 SEBP2424
1196240 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-6242 [1] PLATE AS  
2. 120-9870 [2] LINK AS  
    (EACH AS INCLUDES)
  1J-2315 [1] BOSS  
3. 120-9875 [2] CAM AS  
4. 7X-0576 [6] WASHER-HARD (28X44.5X6-MM THK)  
5. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
6. 3K-2889 [4] LOCKNUT (5/8-11-THD)  
7. 6K-0715 [2] PIN  
8. 7X-0338 [2] BOLT (1/2-13X6-IN)  
9. 7X-0358 [2] BOLT (5/8-11X5.5-IN)  
10. 7X-0359 [2] BOLT (5/8-11X6-IN)  
11. 7X-0403 [6] BOLT (1-8X2.25-IN)  
12. 7X-0404 [6] BOLT (1-8X2.5-IN)  
13. 8J-9092 [2] PIN  
14. 8J-9608 [2] PIN  
15. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
 

#SEBP24240853
 

119-6239: RIPPER AR

119-6239 RIPPER AR
S/N 7WJ1-UP
AN ATTACHMENT
i00123602 SEBP2424
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-5264 Y [1] CYLINDER GP-RIPPER  
  119-6248 Y [1] LINES GP-RIPPER  
  119-6240 Y [1] MOUNTING GP-RIPPER  
  8J-6575 Y [1] RIPPER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240854
 

8J-6575: RIPPER GP

8J-6575 RIPPER GP
S/N 7WJ1-UP
PART OF 119-6239 RIPPER AR
AN ATTACHMENT
i00122458 SEBP2424
8J6575 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0703 [1] BAR  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3K-8510 C [1] PIN  
4. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
5. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
6. 8J-6572 [1] CARRIAGE AS  
6A. 2K-4315 [4] BOSS  
6B. 5K-8330 [7] HOLDER-BIT (TOOTH)  
6C. 2K-4309 [1] REINFORCEMENT (RH)  
6D. 2K-4310 [1] REINFORCEMENT (LH)  
7. 9J-0268 [1] LINK AS-LOWER  
7A. 3G-2580 [4] BEARING  
8. 9J-0269 [2] LINK AS  
    (EACH INCLUDES)
8A. 3G-2582 C [2] BEARING  
9. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
10. 1K-6872 C [8] LOCKNUT (1/2-13-THD)  
11. 3K-2889 [4] LOCKNUT (5/8-11-THD)  
12. 5P-2228 C [2] BOLT (1/2-13X1-IN)  
13. 7X-0325 C [8] BOLT (1/2-13X2.5-IN)  
14. 7X-0358 [2] BOLT (5/8-11X5.5-IN)  
15. 7X-0362 [2] BOLT (5/8-11X7-IN)  
16. 8J-9607 [2] PIN  
17. 8J-9608 [2] PIN  
18. 9D-6584 C [8] SEAL-LIP TYPE  
19. 9D-6585 C [8] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24240855
 

212-6231: SCARIFIER GP

212-6231 SCARIFIER GP
S/N 7WJ1-UP
11-TEETH
CANNOT BE USED WITH @@@@@212-6232@@@@@
AN ATTACHMENT
i02232484 SEBP2424
2126231 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1458 [11] GROMMET  
2. 5K-1459 [11] LOCK PIN  
3. 6Y-5230 [11] TOOTH-SCARIFIER  
4. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
5. 195-7218 [11] SHANK  
6. 212-6279 [1] SCARIFIER AS  
 

#SEBP24240856
 

212-6232: SCARIFIER GP

212-6232 SCARIFIER GP
S/N 7WJ1-UP
5-TEETH
CANNOT BE USED WITH @@@@@212-6231@@@@@
AN ATTACHMENT
i02232559 SEBP2424
2126232 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1459 [5] LOCK PIN  
2. 6Y-5230 [5] TOOTH-SCARIFIER  
3. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
4. 195-7218 [5] SHANK  
5. 212-6279 [1] SCARIFIER AS  
6. 5K-1458 [5] GROMMET  
 

#SEBP24240857
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N 7WJ1-UP
PART OF 8J-6575 RIPPER GP
AN ATTACHMENT
i00122453 SEBP2424
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER  
6. 114-0359 [1] RETAINER AS  
 

#SEBP24240858
 

136-4831: BOX GP-TOOL

136-4831 BOX GP-TOOL
S/N 7WJ307-UP
PART OF 8X-5040 CHASSIS AR
i00502693 SEBP2424
1364831 BOX GP-TOOL Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-0791 [1] BOX AS-TOOL  
2. 5P-8502 [1] PADLOCK GP  
    (EACH INCLUDES)
  5P-8500 A KEY  
  8Y-6364 A SLEEVE  
3. 4L-6454 [4] BOLT (3/8-16X1-IN)  
4. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 6V-8801 [2] NUT (3/8-16-THD)  
  A   NOT PART OF THIS GROUP
 

#SEBP24240859
 

9D-2700: BOX GP-TOOL

9D-2700 BOX GP-TOOL
S/N 7WJ1-306
PART OF 8X-5040 CHASSIS AR
i00122850 SEBP2424
9D2700 BOX GP-TOOL Parts scheme
  For full view, you need register

Parts for your 14H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-0791 C [1] BOX AS-TOOL  
2. 4L-6454 C [4] BOLT (3/8-16X1-IN)  
3. 1D-4717 [2] NUT (3/8-16-THD)  
4. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
5. 5M-3062 CJ [4] BOLT (3/8-16X0.75-IN)  
6. 5P-8502 C [1] PADLOCK GP  
  6V-5874 AC [1] COVER  
  5P-8500 AC [2] KEY  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  J   REQUIRED ONLY ON 16G MOTOR GRADER
 

Information:

Caterpillar Parts SIS Catalog 14H NA :

EXTENSION GP-BLADE
265-6743 EXTENSION GP-BLADE
EDGE-CUTTING
489-6705 EDGE-CUTTING
9D-2170 EDGE GP-CUTTING
107-3424 EDGE GP-CUTTING
BLADE GP
8W-8426 BLADE GP
BLADE GP
8W-8425 BLADE GP
8X-5480 BLADE AR
BIT GP
107-3428 BIT GP
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
MOUNTING GP-RIPPER
119-6240 MOUNTING GP-RIPPER
119-6239 RIPPER AR
RIPPER GP
8J-6575 RIPPER GP
SCARIFIER GP
212-6231 SCARIFIER GP
SCARIFIER GP
212-6232 SCARIFIER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
BOX GP-TOOL
136-4831 BOX GP-TOOL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.