AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0741 CRANKSHAFT GP S/N 11N13000-99999; 41Z1-UP PART OF 110-7949, 7E-9702 ENGINE AR 16H NA MOTOR GRADER


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

MOTOR GRADER 16H NA MOTOR GRADER 6ZJ
 16H Motor Grader 6ZJ00001-UP (MACHINE) POWERED BY 3406C Engine SEBP2425 16H NA 6ZJ   (1995)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
 

#SEBP24250020
 

4N-0741: CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
S/N 11N13000-99999; 41Z1-UP
PART OF 110-7949, 7E-9702 ENGINE AR
i00122071 SEBP2425
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
2. 6I-1453 [1] CRANKSHAFT AS  
2A. 1W-9302 [1] GEAR-CRANKSHAFT (80-TEETH)  
2B. 7S-5005 [1] DOWEL  
2C. 4N-0684 [1] DOWEL  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250021
 

202-1257: CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
S/N 41Z19826-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
i01570723 SEBP2425
2021257 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 167-8083 [14] BOLT (7/8-14X7.5-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP24250022
 

202-1259: CYLINDER BLOCK AS

202-1259 CYLINDER BLOCK AS
S/N 41Z8065-UP
PART OF 108-3916 CYLINDER BLOCK GP
i01662543 SEBP2425
2021259 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 463-3546 [1] CYLINDER BLOCK AS  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
  167-8081 [7] CAP-CRANKSHAFT BEARING  
  167-8083 [14] BOLT (7/8-14X7.5-IN)  
2. 4N-0685 [6] BUSHING (1-IN WIDE)  
3. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
 

#SEBP24250023
 

463-3536: CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
S/N 41Z19826-UP
PART OF 202-1258 CYLINDER BLOCK GP
i06280842 SEBP2425
4633536 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0685 [6] BUSHING (1-IN WIDE)  
2. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
3. 202-1257 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250024
 

108-3914: CYLINDER BLOCK GP

108-3914 CYLINDER BLOCK GP
S/N 11N13000-99999; 41Z8065-UP
PART OF 108-3916 CYLINDER BLOCK GP
i00482453 SEBP2425
1083914 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
2. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP24250025
 

108-3916: CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 11N13000-99999; 41Z8065-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
i00123090 SEBP2425
1083916 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5155 [1] SEAL-O-RING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 7X-7732 [6] PLUG-PIPE  
16. 114-4427 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 108-3914 Y [1] CYLINDER BLOCK GP  
19. 3E-6747 [2] SEAL-O-RING  
20. 100-7399 [2] PLUG  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250026
 

108-3916: CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 41Z8065-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
i01662537 SEBP2425
1083916 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5155 [1] SEAL-O-RING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE (HEX)  
4. 9S-8009 [1] PLUG-O-RING (STRAIGHT THREAD O-RING)  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
15. 7X-7732 [6] PLUG-PIPE  
16. 114-4427 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 202-1259 CY [1] CYLINDER BLOCK AS  
19. 250-0466 [2] SEAL-O-RING  
20. 100-7399 [2] PLUG  
21. 9S-4182 [1] PLUG (7/16-20-THD)(DRAIN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250027
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 41Z8065-19816
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
i00729861 SEBP2425
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 152-7644 Y [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 3E-6747 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250028
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 41Z19817-UP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
i01625329 SEBP2425
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 202-1257 CY [1] CYLINDER BLOCK AS  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)(MARKED X)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 250-0466 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
   
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP24250029
 

152-7644: CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP
S/N 41Z8065-19816
PART OF 152-7642 CYLINDER BLOCK GP
i00734657 SEBP2425
1527644 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 16H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
3. 4N-0795 [7] CAP-CRANKSHAFT BEARING  
 

Information:

Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Special Instruction
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
A New Type of Main Bearing is Available {1202, 1203}
2004/05/03
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 16H NA :

COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
101-5905 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
1W-5107 COVER GP-CYLINDER BLOCK
CAMSHAFT GP
7W-3798 CAMSHAFT GP
AIR COMPRESSOR GP
7E-8455 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7E-8455 AIR COMPRESSOR GP
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CYLINDER BLOCK AS
202-1259 CYLINDER BLOCK AS
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.