AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-2395 CYLINDER GP-STEERING -LH S/N 6WM1-UP 57.15 MM BORE X 267.00 MM STROKE PART OF 8W-2290 CYLINDER & MTG GP-STEERING 160H ES


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
DRIVE GP
ACCUMULATOR GP
LINES GP-HYDRAULIC

MOTOR GRADER 160H ES MOTOR GRADER 6WM
 160H Motor Grader 6WM00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2427 160H ES 6WM   (1994)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
 

#SEBP24270480
 

9T-2395: CYLINDER GP-STEERING

9T-2395 CYLINDER GP-STEERING -LH
S/N 6WM1-UP
57.15 MM BORE X 267.00 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122870 SEBP2427
9T2395 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2394 [1] CYLINDER AS (LH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  J  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24270481
 

121-9242: CYLINDER GP-WHEEL LEAN

121-9242 CYLINDER GP-WHEEL LEAN
S/N 6WM1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00123647 SEBP2427
1219242 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-1076 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 121-9245 [1] ROD AS  
  2G-8631 [1] BUSHING  
11. 308-1845 [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24270482
 

130-3535: DETENT GP-CONTROL VALVE

130-3535 DETENT GP-CONTROL VALVE
S/N 6WM337-UP
PART OF 128-8647, 130-3110, 130-3111 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00123860 SEBP2427
1303535 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2540 M [2] BOLT (M8X1.25X120-MM)  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5722 [2] SEAL-O-RING  
4. 4J-7533 [2] SEAL-O-RING  
5. 9S-8001 [2] PLUG  
6. [1] HOUSING  
7. 9S-8006 [1] PLUG (7/8-14-THD)  
8. 2M-9780 [1] SEAL-O-RING  
9. [1] PISTON  
10. [1] STOP  
11. 5B-9318 [6] BALL  
12. [1] RETAINER  
13. [1] RETAINER  
14. [1] SPACER  
15. 2K-8199 [2] SEAL-O-RING  
16. [1] SPRING  
17. [1] SPRING  
  M   METRIC PART
 

#SEBP24270483
 

110-4656: DRIVE GP-CIRCLE

110-4656 DRIVE GP-CIRCLE
S/N 6WM1-UP
PART OF 124-4191 BLADE AR
i00123131 SEBP2427
1104656 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-7339 [1] SEAL-O-RING  
2. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
3. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 9D-1491 [1] COUPLING  
5. 4H-6996 [1] PIN-SPRING  
6. 2H-9247 [1] SEAL-O-RING  
7. 1B-5174 [1] PLUG-PIPE  
8. 9D-1142 [1] WORM-CIRCLE DRIVE  
9. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
10. 8T-0336 [1] FITTING-PRESSURE RELIEF  
11. 2B-7410 [1] PLUG-PIPE  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
13. 2G-6695 [1] BRACKET  
14. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
15. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
16. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
  5K-8454 [3] BOLT (1/2-13X1.12-IN)(SELF-LOCKING)  
18. 110-4654 [1] COVER AS  
19. 106-7129 [1] BUSHING  
20. 1L-7388 [2] RING-RETAINING  
21. 5H-4909 [1] SEAL-O-RING  
22. 106-7130 [1] GEAR-WORM (36-TEETH)  
23. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
24. 4F-9653 [1] SEAL-O-RING  
25. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
26. 8W-5092 [1] PINION-CIRCLE DRIVE  
27. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
  5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
28. 106-7131 [1] SHAFT  
29. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
30. 9W-6645 [1] SEAL GP-DUO-CONE  
31. 110-4655 [1] HOUSING AS  
  110-4652 [1] HOUSING  
32. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
33. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
34. 106-7128 [1] BUSHING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270484
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 6WM1-UP
AN ATTACHMENT
i00122144 SEBP2427
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 CY [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
19. 1F-7958 C [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
20A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
20B. 8D-7426 [1] BUSHING  
20C. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
20D. 8D-9804 [1] HOUSING-DRIVE  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 9X-8887 C [2] BOLT (3/4-10X3-IN)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 261-8553 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6Y-7953 [6] DISC-FRICTION  
43. 6G-5543 B [6] SHIM (0.13-MM THK)  
44. 6G-6122 [1] SPRING-DISC  
45. 2G-0478 [5] PLATE-CLUTCH  
46. 1B-4046 [2] CONE-BEARING  
47. 7D-8984 B [6] SHIM (0.007-IN THK)  
48. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
49. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
50. 8D-7424 [1] SPACER (48X81X6-MM THK)  
51. 6G-5544 B [9] SHIM (0.25-MM THK)  
52. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270485
 

8X-9733: LINES GP-ACCUMULATOR

8X-9733 LINES GP-ACCUMULATOR
S/N 6WM1-UP
PART OF 221-2960, 8X-9747 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
i00122838 SEBP2427
8X9733 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2824 [6] SEAL-O-RING  
2. 5P-9810 [2] UNION  
3. 7T-6517 Y [2] MANIFOLD GP-CONTROL  
4. 6V-8633 [2] CONNECTOR  
5. 6V-9851 [1] ELBOW  
6. 6V-8398 [7] SEAL-O-RING  
7. 6V-9837 [2] TEE-SWIVEL  
8. 134-0746 I [1] HOSE AS  
9. 151-9849 I [1] HOSE AS  
10. 134-0744 I [1] HOSE AS  
11. 108-0706 I [1] HOSE AS  
12. 6D-4244 [2] CLIP (LOOP)  
13. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
14. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9D-0953 B [1] SPACER (0.406X0.75X0.88-IN THK)(.88MM THK)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270486
 

106-4787: LINES GP-HYDRAULIC

106-4787 LINES GP-HYDRAULIC -LH
S/N 6WM1-UP
4 CIRCUITS
PART OF 124-4191 BLADE AR
i00122995 SEBP2427
1064787 LINES GP-HYDRAULIC Parts scheme 1064787 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-0451 [1] PLATE  
2. 8T-2501 [2] BOLT (3/8-16X2-IN)  
3. 5P-5931 [1] SEAL  
4. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
5. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 135-0452 [2] PLATE  
7. 5D-2645 [3] CLAMP  
8. 9D-0953 [3] SPACER (0.406X0.75X0.88-IN THK)  
9. 108-1610 [4] CLAMP  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 8T-7008 [1] BOLT (3/8-16X3-IN)  
12. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
13. 107-8150 I [1] HOSE AS  
14. 3K-0360 [4] SEAL-O-RING  
15. 6V-8398 [1] SEAL-O-RING  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 6D-4244 [2] CLIP (LOOP)  
18. 8T-1296 [4] WASHER (10.5X19X3.5-MM THK)  
19. 7W-5672 [1] PIPE  
20. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
21. 6V-8397 [3] SEAL-O-RING  
22. 2G-5493 [1] CLAMP  
23. 6V-9876 [2] ELBOW  
24. 6V-8723 [1] ELBOW  
25. 9R-1183 I [1] HOSE AS  
26. 5T-9986 I [1] HOSE AS  
27. 1S-0994 [2] CLIP (LOOP)  
28. 6V-8625 [1] ELBOW  
29. 6V-8801 [2] NUT (3/8-16-THD)  
30. 3B-4628 [2] PIN-COTTER  
31. 9T-5604 Y [1] SWIVEL GP  
32. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 2A-7081 [1] GUIDE AS-HOSE  
35. 8D-9092 [1] PIN  
36. 134-0747 I [1] HOSE AS  
37. 6V-8801 [4] NUT (3/8-16-THD)  
38. 6V-8723 [2] ELBOW  
39. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
40. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
42. 8W-4193 I [1] HOSE AS  
43. 8W-4194 I [1] HOSE AS  
44. 4J-5468 [6] CLAMP  
45. 107-8144 I [2] HOSE AS  
46. 8T-0076 [1] CONNECTOR  
47. 1S-0994 [6] CLIP (LOOP)  
48. 8T-1687 [2] CONNECTOR  
49. 3K-0360 [18] SEAL-O-RING  
50. 6V-8398 [5] SEAL-O-RING  
51. 107-8149 I [2] HOSE AS  
52. 2M-9780 [2] SEAL-O-RING  
53. 6V-8624 [2] ELBOW  
54. 6V-8639 [2] CONNECTOR  
55. 6V-8634 [8] CONNECTOR  
56. 6V-8397 [15] SEAL-O-RING  
57. 107-8143 I [2] HOSE AS  
58. 6V-9876 [4] ELBOW  
59. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
60. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
61. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270487
 

110-2985: LINES GP-HYDRAULIC

110-2985 LINES GP-HYDRAULIC
S/N 6WM1-UP
4 CIRCUITS, RH
PART OF 124-4191 BLADE AR
i00123130 SEBP2427
1102985 LINES GP-HYDRAULIC Parts scheme 1102985 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0941 [4] SPACER (10.5X19X19-MM THK)  
2. 2G-5493 [1] CLAMP  
3. 3S-2093 [1] STRAP-CABLE  
4. 4J-5468 [3] CLAMP  
5. 5D-2645 [2] CLAMP  
6. 5D-4988 [4] CLAMP  
7. 5P-0599 [1] CLAMP-BAND  
8. 8W-0302 I [1] HOSE AS  
9. 9R-8870 [1] BLOCK  
10. 107-8147 I [1] HOSE AS  
11. 107-8148 I [1] HOSE AS  
12. 107-8150 I [1] HOSE AS  
13. 108-1610 [2] CLAMP  
14. 110-3003 I [1] HOSE AS  
15. 134-0747 I [1] HOSE AS  
16. 135-0450 [2] PLATE  
17. 135-0453 [1] PLATE  
18. 163-4195 [1] SLEEVE  
19. 164-5605 [3] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-0076 [1] CONNECTOR  
20. 164-5608 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
21. 100-4336 [1] CLIP (LOOP)  
22. 377-9303 I [1] HOSE AS  
23. 107-8141 I [1] HOSE AS  
24. 377-9304 I [1] HOSE AS  
25. 148-8318 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
26. 148-8363 [3] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9876 [1] ELBOW  
27. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
28. 148-8374 [4] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
29. 148-8383 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1683 [1] ELBOW  
30. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
31. 1S-0994 [6] CLIP (LOOP)  
32. 4L-6454 [1] BOLT (3/8-16X1-IN)  
33. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
34. 5S-7379 [10] BOLT (3/8-16X0.875-IN)  
35. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
36. 6D-4244 [2] CLIP (LOOP)  
37. 6V-8801 [3] NUT (3/8-16-THD)  
38. 7X-0288 [2] BOLT (3/8-16X1.625-IN)  
39. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
41. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-9378 [1] BOLT (3/8-16X4-IN)  
43. 8W-0220 I [1] HOSE AS  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
45. 5P-5931 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24270488
 

155-4077: LINES GP-HYDRAULIC

155-4077 LINES GP-HYDRAULIC -BULLDOZER LIFT, PLOW, LH
S/N 6WM1-UP
Type 1
AN ATTACHMENT
i00861126 SEBP2427
1554077 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [2] SEAL-O-RING  
2. 8T-0076 [1] CONNECTOR  
3. 6V-8397 [2] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 114-0026 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24270489
 

155-4077: LINES GP-HYDRAULIC

155-4077 LINES GP-HYDRAULIC -BULLDOZER LIFT, PLOW, LH
S/N 6WM1-UP
Type 2
AN ATTACHMENT
i01487192 SEBP2427
1554077 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-0026 I [2] HOSE AS  
2. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
3. 164-5605 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-0076 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 160H ES :

CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
6E-1338 CYLINDER GP-LIFT
CYLINDER GP-LIFT
132-4929 CYLINDER GP-LIFT
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
DETENT GP-CONTROL VALVE
130-3535 DETENT GP-CONTROL VALVE
DRIVE GP-CIRCLE
110-4656 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
LINES GP-ACCUMULATOR
8X-9733 LINES GP-ACCUMULATOR
LINES GP-HYDRAULIC
106-4787 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
110-2985 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
155-4077 LINES GP-HYDRAULIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.