AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

195-7267 EDGE GP-CUTTING -3 FT S/N 6WM1-UP AN ATTACHMENT 160H ES MOTOR GRADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
RIPPER GP
SCARIFIER GP

MOTOR GRADER 160H ES MOTOR GRADER 6WM
 160H Motor Grader 6WM00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2427 160H ES 6WM   (1994)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
BIT GP
107-3415 BIT GP
BIT GP
107-3416 BIT GP
BIT GP-END
107-3398 BIT GP-END
107-3396 EDGE GP-CUTTING
107-3397 EDGE GP-CUTTING
195-7266 EDGE GP-CUTTING
195-7267 EDGE GP-CUTTING
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
 

#SEBP24270810
 

195-7267: EDGE GP-CUTTING

195-7267 EDGE GP-CUTTING -3 FT
S/N 6WM1-UP
AN ATTACHMENT
i01631680 SEBP2427
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP24270811
 

110-5326: EXTENSION GP-BLADE

110-5326 EXTENSION GP-BLADE -RH
S/N 6WM1-UP
2-FT
AN ATTACHMENT
i00123135 SEBP2427
1105326 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
2. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
3. 176-5639 [1] PLATE AS  
4. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
5. 110-5336 [1] ANGLE AS  
6. 110-5334 [3] SPACER (3-MM THK)  
7. 3G-2165 [1] EDGE-CUTTING  
8. 133-7523 [1] EXTENSION  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP24270812
 

110-5327: EXTENSION GP-BLADE

110-5327 EXTENSION GP-BLADE -LH
S/N 6WM1-UP
2-FT
AN ATTACHMENT
i00123136 SEBP2427
1105327 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 110-5335 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP24270813
 

8X-1935: LIFT GP-BLADE

8X-1935 LIFT GP-BLADE
S/N 6WM1-UP
PART OF 124-4191 BLADE AR
i00122636 SEBP2427
8X1935 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
3. 7D-8891 [2] RETAINER  
4. 8X-3616 [1] ARM AS (RH)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 8D-8168 [1] BEARING (63.65-MM ID)  
7. 2J-3506 [6] NUT-FULL (3/4-10-THD)  
  3B-6753 [6] BOLT (3/4-10X4.75-IN)  
8. 5P-8248 [16] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 8X-5106 [1] STUD-BALL  
10. 8D-4332 [2] PIN  
11. 8X-5110 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
12. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
13. 8X-5109 [1] BAR AS  
14. 8X-5108 [2] BUSHING  
15. 124-5836 [5] BUSHING  
16. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
17. 9D-3583 [2] LOCK  
18. 7H-2444 [2] SEAL-O-RING  
19. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
20. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
21. 7D-8879 B [8] SHIM (0.127-MM THK)  
22. 7D-8881 B [6] SHIM (0.254-MM THK)  
23. 7D-8882 B [2] SHIM (0.508-MM THK)  
24. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
25. 5F-0149 [2] SEAL-O-RING  
26. 7D-8883 [2] SEAL  
27. 8X-5107 [1] PIN  
28. 3P-1461 [4] SEAL-LIP TYPE  
29. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
30. 8X-5111 [2] LOCK  
31. 7D-8884 [2] SEAL  
32. 8X-3615 [1] ARM AS (LH)  
  8D-8168 [1] BEARING (63.65-MM ID)  
  7D-8889 [1] BEARING (76.35-MM ID)  
33. 124-0435 [1] PLATE  
34. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
35. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP24270814
 

9W-7467: MOUNTING GP-RIPPER

9W-7467 MOUNTING GP-RIPPER
S/N 6WM1-UP
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i00122900 SEBP2427
9W7467 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7438 [1] PLATE AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  104-4522 [2] PLATE  
2. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
3. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
4. 9W-7470 [2] PIN  
5. 7X-0403 [10] BOLT (1-8X2.25-IN)  
6. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
7. 109-6776 [2] PIN  
8. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 3W-7256 [2] SPACER (47X80X16-MM THK)(16MM THK)  
11. 3W-7254 [2] SPACER (47X80X20-MM THK)(20MM THK)  
12. 9W-7469 [2] PIN  
13. 104-4523 [2] CAM AS  
14. 8E-6130 [2] LINK AS  
  2K-4233 [2] BOSS  
15. 6P-5647 [2] BOSS  
 

#SEBP24270815
 

9W-7603: RIPPER AR

9W-7603 RIPPER AR
S/N 6WM1-UP
AN ATTACHMENT
i00122901 SEBP2427
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-7754 Y [1] CYLINDER GP-RIPPER  
  109-7027 Y [1] LINES GP-RIPPER  
  [1] LITERATURE GP  
  9W-7467 Y [1] MOUNTING GP-RIPPER  
  8J-7024 Y [1] RIPPER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270816
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 6WM1-UP
3-TEETH
PART OF 9W-7603 RIPPER AR
Type 1
AN ATTACHMENT
i00122459 SEBP2427
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
2. 4K-3150 [2] PIN  
3. 9J-0095 [1] LINK AS-LOWER  
4. 3G-2579 [4] BEARING  
6. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
7. 7L-6363 [2] MARKER  
8. 8J-7008 [2] PIN  
9. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  2K-4973 [2] LOCKNUT (3/8-16-THD)  
10. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARINGS)  
11. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
12. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
13. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
14. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
15. 3G-2581 [2] BEARING  
16. 7K-9203 [8] SEAL-LIP TYPE  
17. 2D-0626 [8] SEAL  
18. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
19. 2K-0120 [1] PIN  
20. 5P-2228 [2] BOLT (1/2-13X1-IN)  
21. 2K-0703 [1] BAR  
22. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270817
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 6WM1-UP
3-TEETH
PART OF 9W-7603 RIPPER AR
Type 2
AN ATTACHMENT
i01473868 SEBP2427
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 7L-6363 [2] MARKER  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
11. 172-5454 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270818
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 6WM1-UP
3-TEETH
PART OF 9W-7603 RIPPER AR
Type 3
AN ATTACHMENT
i01473128 SEBP2427
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
11. 187-0953 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24270819
 

108-1104: SCARIFIER AR

108-1104 SCARIFIER AR -VEE TYPE
S/N 6WM1-UP
AN ATTACHMENT
i00123088 SEBP2427
  For full view, you need register

Parts for your 160H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  116-0379 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  8X-6070 Y [1] LINES GP-HYDRAULIC (SCARIFIER)  
  8X-6080 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 160H ES :

195-7266 EDGE GP-CUTTING
107-3397 EDGE GP-CUTTING
107-3396 EDGE GP-CUTTING
BRACKET GP-SCARIFIER
116-0379 BRACKET GP-SCARIFIER
BLADE GP
8X-1955 BLADE GP
BLADE GP
8W-7465 BLADE GP
124-4191 BLADE AR
BIT GP-END
107-3398 BIT GP-END
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE
MOUNTING GP-RIPPER
9W-7467 MOUNTING GP-RIPPER
9W-7603 RIPPER AR
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.