AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-2393 CYLINDER GP-STEERING -RH S/N 6NM1-UP 57.15-MM (2.25-IN) BORE X 267-MM (10.5-IN) STROKE PART OF 8W-2290 CYLINDER & MTG GP-STEERING 120H ES


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
DRIVE GP
ACCUMULATOR GP
LINES GP-HYDRAULIC

MOTOR GRADER 120H ES MOTOR GRADER 6NM
 120H Motor Grader 6NM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2428 120H ES 6NM   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
 

#SEBP24280520
 

9T-2393: CYLINDER GP-STEERING

9T-2393 CYLINDER GP-STEERING -RH
S/N 6NM1-UP
57.15-MM (2.25-IN) BORE X 267-MM (10.5-IN) STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122869 SEBP2428
9T2393 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-9045 [1] CYLINDER AS (RH)  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 167-2186 J [1] SEAL AS-BUFFER  
10. 167-2294 J [1] SEAL-U-CUP  
11. 226-8202 J [1] SEAL-WIPER  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 J [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  J   KITS MARKED J INCLUDE PARTS MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24280521
 

9T-2395: CYLINDER GP-STEERING

9T-2395 CYLINDER GP-STEERING -LH
S/N 6NM1-UP
57.15 MM BORE X 267.00 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122870 SEBP2428
9T2395 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2394 [1] CYLINDER AS (LH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  J  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24280522
 

121-9242: CYLINDER GP-WHEEL LEAN

121-9242 CYLINDER GP-WHEEL LEAN
S/N 6NM1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00123647 SEBP2428
1219242 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-1076 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 121-9245 [1] ROD AS  
  2G-8631 [1] BUSHING  
11. 308-1845 [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24280523
 

108-4916: DETENT GP-CONTROL VALVE

108-4916 DETENT GP-CONTROL VALVE
S/N 6NM1-UP
PART OF 153-8907, 6E-3031, 6E-3037 VALVE GP-CONTROL
AN ATTACHMENT
i00123091 SEBP2428
1084916 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] RETAINER  
2. [1] RETAINER  
3. [1] SPRING  
4. 5B-9318 [6] BALL  
 

#SEBP24280524
 

130-3535: DETENT GP-CONTROL VALVE

130-3535 DETENT GP-CONTROL VALVE
S/N 6NM246-UP
PART OF 128-8647, 130-3110, 130-3111 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00123860 SEBP2428
1303535 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2540 M [2] BOLT (M8X1.25X120-MM)  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5722 [2] SEAL-O-RING  
4. 4J-7533 [2] SEAL-O-RING  
5. 9S-8001 [2] PLUG  
6. [1] HOUSING  
7. 9S-8006 [1] PLUG (7/8-14-THD)  
8. 2M-9780 [1] SEAL-O-RING  
9. [1] PISTON  
10. [1] STOP  
11. 5B-9318 [6] BALL  
12. [1] RETAINER  
13. [1] RETAINER  
14. [1] SPACER  
15. 2K-8199 [2] SEAL-O-RING  
16. [1] SPRING  
17. [1] SPRING  
  M   METRIC PART
 

#SEBP24280525
 

110-4656: DRIVE GP-CIRCLE

110-4656 DRIVE GP-CIRCLE
S/N 6NM1-UP
PART OF 124-4189 BLADE AR
i00123131 SEBP2428
1104656 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-7339 [1] SEAL-O-RING  
2. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
3. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 9D-1491 [1] COUPLING  
5. 4H-6996 [1] PIN-SPRING  
6. 2H-9247 [1] SEAL-O-RING  
7. 1B-5174 [1] PLUG-PIPE  
8. 9D-1142 [1] WORM-CIRCLE DRIVE  
9. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
10. 8T-0336 [1] FITTING-PRESSURE RELIEF  
11. 2B-7410 [1] PLUG-PIPE  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
13. 2G-6695 [1] BRACKET  
14. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
15. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
16. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
  5K-8454 [3] BOLT (1/2-13X1.12-IN)(SELF-LOCKING)  
18. 110-4654 [1] COVER AS  
19. 106-7129 [1] BUSHING  
20. 1L-7388 [2] RING-RETAINING  
21. 5H-4909 [1] SEAL-O-RING  
22. 106-7130 [1] GEAR-WORM (36-TEETH)  
23. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
24. 4F-9653 [1] SEAL-O-RING  
25. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
26. 8W-5092 [1] PINION-CIRCLE DRIVE  
27. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
  5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
28. 106-7131 [1] SHAFT  
29. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
30. 9W-6645 [1] SEAL GP-DUO-CONE  
31. 110-4655 [1] HOUSING AS  
  110-4652 [1] HOUSING  
32. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
33. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
34. 106-7128 [1] BUSHING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP24280526
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 6NM1-243
AN ATTACHMENT
i00122144 SEBP2428
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 CY [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
19. 1F-7958 C [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
20A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
20B. 8D-7426 [1] BUSHING  
20C. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
20D. 8D-9804 [1] HOUSING-DRIVE  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 9X-8887 C [2] BOLT (3/4-10X3-IN)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 261-8553 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6Y-7953 [6] DISC-FRICTION  
43. 6G-5543 B [6] SHIM (0.13-MM THK)  
44. 6G-6122 [1] SPRING-DISC  
45. 2G-0478 [5] PLATE-CLUTCH  
46. 1B-4046 [2] CONE-BEARING  
47. 7D-8984 B [6] SHIM (0.007-IN THK)  
48. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
49. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
50. 8D-7424 [1] SPACER (48X81X6-MM THK)  
51. 6G-5544 B [9] SHIM (0.25-MM THK)  
52. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24280527
 

8X-9733: LINES GP-ACCUMULATOR

8X-9733 LINES GP-ACCUMULATOR
S/N 6NM1-UP
PART OF 221-2960 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
i00122838 SEBP2428
8X9733 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2824 [6] SEAL-O-RING  
2. 5P-9810 [2] UNION  
3. 7T-6517 Y [2] MANIFOLD GP-CONTROL  
4. 6V-8633 [2] CONNECTOR  
5. 6V-9851 [1] ELBOW  
6. 6V-8398 [7] SEAL-O-RING  
7. 6V-9837 [2] TEE-SWIVEL  
8. 134-0746 I [1] HOSE AS  
9. 151-9849 I [1] HOSE AS  
10. 134-0744 I [1] HOSE AS  
11. 108-0706 I [1] HOSE AS  
12. 6D-4244 [2] CLIP (LOOP)  
13. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
14. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9D-0953 B [1] SPACER (0.406X0.75X0.88-IN THK)(.88MM THK)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24280528
 

106-4781: LINES GP-HYDRAULIC

106-4781 LINES GP-HYDRAULIC
S/N 6NM1-243
4 CIRCUITS, RH
PART OF 124-4189 BLADE AR
i00122991 SEBP2428
1064781 LINES GP-HYDRAULIC Parts scheme 1064781 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8723 [4] ELBOW  
2. 3K-0360 [18] SEAL-O-RING  
3. 6V-9836 [2] TEE-SWIVEL  
4. 107-8141 I [1] HOSE AS  
5. 107-8142 I [1] HOSE AS  
6. 107-8140 I [1] HOSE AS  
7. 8W-0220 I [1] HOSE AS  
8. 107-8148 I [1] HOSE AS  
9. 107-8147 I [1] HOSE AS  
10. 8T-1683 [2] ELBOW  
11. 6V-8397 [20] SEAL-O-RING  
12. 6V-8634 [4] CONNECTOR  
13. 107-8151 I [1] HOSE AS  
14. 107-8150 I [1] HOSE AS  
15. 8T-1687 [1] CONNECTOR  
16. 6V-8398 [2] SEAL-O-RING  
17. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
18. 107-8146 I [2] HOSE AS  
19. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
20. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 108-1607 [1] CLAMP  
22. 5P-8167 [3] BOLT (3/8-16X0.625-IN)  
23. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
24. 5S-7379 [7] BOLT (3/8-16X0.875-IN)  
25. 108-1609 [2] CLAMP  
26. 5D-2645 [2] CLAMP  
27. 8T-0076 [3] CONNECTOR  
28. 5D-4988 [4] CLAMP  
29. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
30. 7X-0288 [1] BOLT (3/8-16X1.625-IN)  
31. 4J-5468 [3] CLAMP  
32. 2G-5493 [1] CLAMP  
33. 9R-8870 [1] BLOCK  
34. 5P-0599 [1] CLAMP-BAND  
35. 6V-9876 [3] ELBOW  
36. 6V-8625 [1] ELBOW  
37. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
38. 7W-5672 [1] PIPE  
39. 8T-1296 B [4] WASHER (10.5X19X3.5-MM THK)  
40. 1S-0994 [4] CLIP (LOOP)  
41. 6V-8801 [2] NUT (3/8-16-THD)  
42. 6D-4244 [2] CLIP (LOOP)  
43. 5P-5931 BD SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24280529
 

106-4787: LINES GP-HYDRAULIC

106-4787 LINES GP-HYDRAULIC -LH
S/N 6NM1-UP
4 CIRCUITS
PART OF 124-4189 BLADE AR
i00122995 SEBP2428
1064787 LINES GP-HYDRAULIC Parts scheme 1064787 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-0451 [1] PLATE  
2. 8T-2501 [2] BOLT (3/8-16X2-IN)  
3. 5P-5931 [1] SEAL  
4. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
5. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 135-0452 [2] PLATE  
7. 5D-2645 [3] CLAMP  
8. 9D-0953 [3] SPACER (0.406X0.75X0.88-IN THK)  
9. 108-1610 [4] CLAMP  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 8T-7008 [1] BOLT (3/8-16X3-IN)  
12. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
13. 107-8150 I [1] HOSE AS  
14. 3K-0360 [4] SEAL-O-RING  
15. 6V-8398 [1] SEAL-O-RING  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 6D-4244 [2] CLIP (LOOP)  
18. 8T-1296 [4] WASHER (10.5X19X3.5-MM THK)  
19. 7W-5672 [1] PIPE  
20. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
21. 6V-8397 [3] SEAL-O-RING  
22. 2G-5493 [1] CLAMP  
23. 6V-9876 [2] ELBOW  
24. 6V-8723 [1] ELBOW  
25. 9R-1183 I [1] HOSE AS  
26. 5T-9986 I [1] HOSE AS  
27. 1S-0994 [2] CLIP (LOOP)  
28. 6V-8625 [1] ELBOW  
29. 6V-8801 [2] NUT (3/8-16-THD)  
30. 3B-4628 [2] PIN-COTTER  
31. 9T-5604 Y [1] SWIVEL GP  
32. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 2A-7081 [1] GUIDE AS-HOSE  
35. 8D-9092 [1] PIN  
36. 134-0747 I [1] HOSE AS  
37. 6V-8801 [4] NUT (3/8-16-THD)  
38. 6V-8723 [2] ELBOW  
39. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
40. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
42. 8W-4193 I [1] HOSE AS  
43. 8W-4194 I [1] HOSE AS  
44. 4J-5468 [6] CLAMP  
45. 107-8144 I [2] HOSE AS  
46. 8T-0076 [1] CONNECTOR  
47. 1S-0994 [6] CLIP (LOOP)  
48. 8T-1687 [2] CONNECTOR  
49. 3K-0360 [18] SEAL-O-RING  
50. 6V-8398 [5] SEAL-O-RING  
51. 107-8149 I [2] HOSE AS  
52. 2M-9780 [2] SEAL-O-RING  
53. 6V-8624 [2] ELBOW  
54. 6V-8639 [2] CONNECTOR  
55. 6V-8634 [8] CONNECTOR  
56. 6V-8397 [15] SEAL-O-RING  
57. 107-8143 I [2] HOSE AS  
58. 6V-9876 [4] ELBOW  
59. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
60. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
61. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H ES :

CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-LIFT
132-4926 CYLINDER GP-LIFT
CYLINDER GP-LIFT
119-8664 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
6E-4724 CYLINDER GP-HYDRAULIC
CYLINDER GP-CENTERSHIFT
6E-1754 CYLINDER GP-CENTERSHIFT
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
DETENT GP-CONTROL VALVE
108-4916 DETENT GP-CONTROL VALVE
DETENT GP-CONTROL VALVE
130-3535 DETENT GP-CONTROL VALVE
DRIVE GP-CIRCLE
110-4656 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
LINES GP-ACCUMULATOR
8X-9733 LINES GP-ACCUMULATOR
LINES GP-HYDRAULIC
106-4781 LINES GP-HYDRAULIC

Truck sale:

CATERPILLAR 120H ES 1996
$69,783 USD 
CATERPILLAR 120H ES 1996
- MOTOR GRADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.