AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-7780 CONTROL GP-BUCKET -CUSTOM S/N 4FR1-UP PART OF 2Z-9990 LIFT AR 990 II WHEEL LOADER


IMPLEMENTS
CONTROL GP
LIFT AR
OPERATOR STATION
SEAT GP
AIR CONDITIONER GP

WHEEL LOADER 990 II WHEEL LOADER 4FR
 990 Series II Wheel Loader 4FR00001-UP (MACHINE) POWERED BY 3412 Engine SEBP2431 990 II 4FR   (1995)

IMPLEMENTS

CONTROL GP
ARM & BEARING AS-LIFT
188-9293 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
189-7104 ARM & BEARING AS-LIFT
CONTROL GP-BUCKET
2Q-7780 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8R-5627 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8R-5627 CONTROL GP-BUCKET
LEVER GP-TILT
188-9294 LEVER GP-TILT
 

#SEBP24310620
 

2Q-7780: CONTROL GP-BUCKET

2Q-7780 CONTROL GP-BUCKET -CUSTOM
S/N 4FR1-UP
PART OF 2Z-9990 LIFT AR
i01543586 SEBP2431
2Q7780 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-5594 [5] PIN AS  
2. 8T-0299 M [16] BOLT (M16X2X30-MM)  
3. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 4E-5609 [8] PLATE  
5. 9X-7700 [16] SEAL-LIP TYPE  
6. 2Q-7841 [1] ARM & BEARING AS-LIFT  
  3G-8632 [4] BLOCK  
  4E-5582 [2] BUSHING  
  4E-5635 [2] BUSHING  
  9U-0585 [1] RETAINER  
  132-8677 [2] BEARING  
  2Q-7785 [1] ARM AS-LIFT  
  4E-3861 [1] CROSSMEMBER  
  2Q-7783 [2] PLATE AS  
    (EACH INCLUDES)
  4E-3862 [1] BRACKET (LH)  
  4E-3863 [1] BRACKET (RH)  
  4E-3864 [1] BOSS (LH)  
  4E-3865 [1] BOSS (RH)  
  4E-3866 [2] BOSS-REAR  
7. 081-5816 M [2] BOLT  
8. 3S-7023 [4] WASHER (34X57X6-MM THK)  
9. 4E-5608 [2] COLLET  
10. 115-7787 [2] PIN  
11. 4E-5607 [2] COLLET  
12. 9X-7699 [4] SEAL-LIP TYPE  
13. 4E-5597 [2] PIN AS  
14. 4E-5587 [1] LEVER & BUSHING AS  
  4E-5588 [1] BUSHING  
15. 2Q-7793 [1] LINK AS  
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  132-7431 [2] BUSHING  
16. 4E-5599 [1] PIN AS  
17. 4E-5604 [1] PIN  
18. 4E-5605 [2] COLLET  
19. 8T-1583 M [2] NUT (M30X3.5-THD)  
20. 8X-3465 [1] ROD  
21. 9X-7703 [2] SEAL-LIP TYPE  
22. 4F-7507 [4] SEAL-O-RING  
23. 132-8673 [2] PLATE-SEAL  
24. 171-3753 [1] COLLAR  
25. 122-1784 [4] SPACER (30.4-MM THK)  
26. 103-3531 [4] SPACER (23.5-MM THK)  
27. 2H-3933 [2] SEAL-O-RING  
28. 8T-0667 M [6] BOLT (M24X3X100-MM)  
29. 8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
30. 132-8674 [2] PIN AS  
31. 1R-1052 [4] SEAL AS  
32. 9S-4185 [2] PLUG (3/4-16-THD)  
33. 3K-0360 [2] SEAL-O-RING  
  M   METRIC PART
 

#SEBP24310621
 

8R-5627: CONTROL GP-BUCKET

8R-5627 CONTROL GP-BUCKET
S/N 4FR1-UP
PART OF 123-1035 CHASSIS AR
Type 1
i00678101 SEBP2431
8R5627 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-5594 [5] PIN AS  
2. 8T-0299 M [16] BOLT (M16X2X30-MM)  
3. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 4E-5609 [8] PLATE  
5. 9X-7700 [16] SEAL-LIP TYPE  
6. 9U-0578 [2] BEARING  
7. 081-5816 M [2] BOLT  
8. 3S-7023 [4] WASHER (34X57X6-MM THK)  
9. 4E-5608 [2] COLLET  
10. 115-7787 [2] PIN  
11. 4E-5607 [2] COLLET  
12. 9X-7699 [4] SEAL-LIP TYPE  
13. 4E-5597 [2] PIN AS  
14. 9S-4185 [2] PLUG (3/4-16-THD)  
  3K-0360 [2] SEAL-O-RING  
15. 1R-1052 [4] SEAL AS  
16. 4E-5599 [1] PIN AS  
17. 4E-5604 [1] PIN  
18. 4E-5605 [2] COLLET  
19. 8T-1583 M [2] NUT (M30X3.5-THD)  
20. 8X-3465 [1] ROD  
21. 9X-7703 [2] SEAL-LIP TYPE  
22. 4F-7507 [4] SEAL-O-RING  
23. 103-3526 [2] PLATE-SEAL  
24. 122-1783 C [4] COLLAR  
25. 122-1784 C [4] SPACER (30.4-MM THK)  
26. 103-3531 [4] SPACER (23.5-MM THK)  
27. 2H-3933 [2] SEAL-O-RING  
28. 8T-0667 M [6] BOLT (M24X3X100-MM)  
29. 8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
30. 122-1778 C [2] PIN AS  
31. 4E-5581 [1] ARM & BEARING AS-LIFT  
32. 4E-5635 [2] BUSHING  
33. 4E-5582 [2] BUSHING  
34. 9U-0585 [1] RETAINER  
35. 9U-0578 [2] BEARING  
36. 4E-3861 [1] CROSSMEMBER  
  4E-5584 [2] PLATE AS  
    (EACH INCLUDES)
37. 4E-3866 [2] BOSS-REAR  
38. 4E-3862 [1] BRACKET (LH)  
  4E-3863 [1] BRACKET (RH)  
39. 4E-3864 [1] BOSS (LH)  
  4E-3865 [1] BOSS (RH)  
40. 4E-5587 [1] LEVER & BUSHING AS  
41. 4E-5588 [1] BUSHING  
42. 4E-5592 [1] LINK AS  
43. 4E-5593 [2] BUSHING  
44. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24310622
 

8R-5627: CONTROL GP-BUCKET

8R-5627 CONTROL GP-BUCKET
S/N 4FR1-UP
PART OF 123-1035 CHASSIS AR
Type 2
i00652798 SEBP2431
8R5627 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-5594 [5] PIN AS  
2. 8T-0299 M [16] BOLT (M16X2X30-MM)  
3. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 4E-5609 [8] PLATE  
5. 9X-7700 [16] SEAL-LIP TYPE  
6. 9U-0578 [2] BEARING  
7. 081-5816 M [2] BOLT  
8. 3S-7023 [4] WASHER (34X57X6-MM THK)  
9. 4E-5608 [2] COLLET  
10. 115-7787 [2] PIN  
11. 4E-5607 [2] COLLET  
12. 9X-7699 [4] SEAL-LIP TYPE  
13. 4E-5597 [2] PIN AS  
14. 9S-4185 [2] PLUG (3/4-16-THD)  
  3K-0360 [2] SEAL-O-RING  
15. 1R-1052 [4] SEAL AS  
16. 4E-5599 [1] PIN AS  
17. 4E-5604 [1] PIN  
18. 4E-5605 [2] COLLET  
19. 8T-1583 M [2] NUT (M30X3.5-THD)  
20. 8X-3465 [1] ROD  
21. 9X-7703 [2] SEAL-LIP TYPE  
22. 4F-7507 [4] SEAL-O-RING  
23. 132-8673 C [2] PLATE-SEAL  
24. 171-3753 C [4] COLLAR  
25. 122-1784 [4] SPACER (30.4-MM THK)  
26. 103-3531 [4] SPACER (23.5-MM THK)  
27. 2H-3933 [2] SEAL-O-RING  
28. 8T-0667 M [6] BOLT (M24X3X100-MM)  
29. 8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
30. 132-8674 C [2] PIN AS  
31. 4E-5581 [1] ARM & BEARING AS-LIFT  
32. 4E-5635 [2] BUSHING  
33. 4E-5582 [2] BUSHING  
34. 9U-0585 [1] RETAINER  
35. 9U-0578 [2] BEARING  
36. 4E-3861 [1] CROSSMEMBER  
  4E-5584 [2] PLATE AS  
    (EACH INCLUDES)
37. 4E-3866 [2] BOSS-REAR  
38. 4E-3862 [1] BRACKET (LH)  
  4E-3863 [1] BRACKET (RH)  
39. 4E-3864 [1] BOSS (LH)  
  4E-3865 [1] BOSS (RH)  
40. 4E-5587 [1] LEVER & BUSHING AS  
41. 4E-5588 [1] BUSHING  
42. 132-8675 C [1] LINK AS  
43. 132-7431 [2] BUSHING  
44. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24310623
 

188-9294: LEVER GP-TILT

188-9294 LEVER GP-TILT
S/N 4FR1-UP
CUSTOM
PART OF 2Q-8402, 2Q-8416, 2Q-8417 LUBRICATION AR-AUTOMATIC
i01496299 SEBP2431
1889294 LEVER GP-TILT Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-5587 [1] LEVER & BUSHING AS  
2. 4E-5588 [1] BUSHING  
 

#SEBP24310624
 

2Z-9990: LIFT AR

2Z-9990 LIFT AR -CUSTOM
S/N 4FR1-UP
i01542747 SEBP2431
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  152-5273 Y [1] AXLE AR-FIXED (FRONT)  
  152-5276 Y [1] AXLE AR-OSCILLATING (REAR)  
  2Q-2615 [1] BUMPER AS  
  4E-8308 [2] PLATE  
  2Q-7780 Y [1] CONTROL GP-BUCKET  
  2Q-7656 Y [1] COUNTERWEIGHT GP-REAR  
  4Z-6390 Y [2] CYLINDER GP-LIFT (HIGH LIFT MACHINES)  
  4Z-6417 Y [1] CYLINDER GP-TILT (HIGH LIFT MACHINES)  
  Y [1] HARDWARE GP-REAR FRAME  
  2V-8555 [2] HOSE AS  
  2Q-7633 Y [1] KICKOUT & POSITIONER GP (HIGH LIFT MACHINES)  
  2Q-7107 Y [1] LINES GP-TILT CYLINDER (HIGH LIFT MACHINES)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24310625
 

173-1028: ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N 4FR1-UP
SLIDE
PART OF 178-7910 SEAT GP
Type 1
i01105280 SEBP2431
1731028 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8256 [4] SPRING  
2. 117-4486 [1] ANCHOR  
3. 117-4492 [1] ROD  
4. 132-0338 [2] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
5. 136-1544 [1] LATCH AS (LH)  
6. 143-1288 [1] LOCKNUT-FLANGE (3/8-16-THD)  
7. 156-5545 [1] LATCH AS (RH)  
8. 164-4531 [1] ROD  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 170-1114 [1] HANDLE (SLIDE ADJUSTMENT)  
11. 170-1115 [1] HANDLE (TILT ADJUSTMENT)  
12. 172-4001 [1] BRACKET  
13. 1D-4675 [1] BOLT-CARRIAGE (3/8-16X0.75-IN)  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 7L-8170 [1] NUT-FULL (5/16-18-THD)  
16. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
17. 170-1112 [1] PLATE AS  
 

#SEBP24310626
 

173-1028: ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N 4FR1-UP
SLIDE
PART OF 178-7910 SEAT GP
Type 2
i01469457 SEBP2431
1731028 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8256 [4] SPRING  
2. 117-4492 [1] ROD  
3. 136-1544 [1] LATCH AS (LH)  
4. 156-5545 [1] LATCH AS (RH)  
5. 164-4531 [1] ROD  
6. 170-1112 [1] PLATE AS  
7. 170-1114 [1] HANDLE (SLIDE ADJUSTMENT)  
8. 170-1115 [1] HANDLE (TILT ADJUSTMENT)  
9. 132-0338 [2] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
10. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
11. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
 

#SEBP24310627
 

237-3970: AIR COMPRESSOR GP-SEAT

237-3970 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N 4FR1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 191-2933 SUSPENSION GP-SEAT
i02012095 SEBP2431
2373970 AIR COMPRESSOR GP-SEAT Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP24310628
 

118-7645: AIR CONDITIONER AR

118-7645 AIR CONDITIONER AR
S/N 4FR1-UP
PART OF 130-6908, 178-4503, 2Q-8188 CAB AR
i00172166 SEBP2431
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  123-8576 Y [1] AIR CONDITIONER GP  
  123-8714 Y [1] DUCT GP-CAB AIR  
  4E-9439 Y [1] FILTER GP-CAB AIR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24310629
 

123-8576: AIR CONDITIONER GP

123-8576 AIR CONDITIONER GP
S/N 4FR1-UP
PART OF 118-7645 AIR CONDITIONER AR
Type 1
i00172203 SEBP2431
1238576 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 990 II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3307 [1] COIL AS-HEATER  
2. 3E-6282 [1] COIL AS-EVAPORATOR  
3. 174-1494 [1] MOTOR AS-BLOWER (24-VOLT, A/C, HEATER)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 8P-5141 [2] PLATE-ORIFICE  
5. 3E-6280 [1] COVER  
6. 3T-6774 [1] GROMMET  
7. 136-1953 E HOSE (48-CM)  
8. 3E-6147 [1] INSULATION  
9. 3E-7252 [1] INSULATION  
10. 3E-7253 [2] INSULATION  
11. 130-3590 [2] INSULATION  
12. 3E-7255 [2] INSULATION  
13. 3E-7256 [1] INSULATION  
14. 3E-7257 [1] INSULATION  
15. 5P-5926 D SEAL (1.2-M)  
16. 3E-7258 [1] INSULATION  
17. 5P-5672 D SEAL (0.3-M)  
18. 5P-3945 [1] CAP  
19. 5P-3950 [1] CAP  
20. 9X-7381 [1] SEAL-O-RING  
21. 9X-7383 [1] SEAL-O-RING  
22. 9X-7384 [1] SEAL-O-RING  
23. 3E-0400 [2] WHEEL AS-BLOWER  
24. 5P-7070 D INSULATION-STRIP (0.7-M)  
25. 5P-6670 [2] FILM-INSTRUCTION (WATER IN, WATER OUT)  
26. 6P-8855 [2] SPACER-TUBE  
27. 7K-3176 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
28. 2H-3924 [2] LOCKWASHER  
29. 5P-3928 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
30. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
31. 3E-6145 [1] TUBE AS  
32. 3E-6144 [1] TUBE AS  
33. 9X-7382 [1] SEAL-O-RING  
34. 3S-2093 [3] STRAP-CABLE  
35. 9X-2488 [4] CLAMP-HOSE  
36. 8T-4137 M [16] BOLT (M10X1.5X20-MM)  
37. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
38. 7X-0490 M [1] BOLT (M6X1X200-MM)  
39. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
40. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
41. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
42. 3B-4501 [2] LOCKWASHER  
43. 6V-7728 M [1] BOLT (M6X1X45-MM)  
44. 6V-8837 M [4] BOLT (M6X1X16-MM)  
45. 8T-4205 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 2H-3925 [2] LOCKWASHER  
47. 5C-2890 M [6] NUT (M6X1-THD)  
48. 6V-7743 M [5] LOCKNUT (M6X1-THD)  
49. 5B-6565 [2] NUT  
50. 6V-9170 [2] NUT-BULKHEAD (1-14-THD)  
51. 8C-4586 [2] CLAMP  
52. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)(AIR CONDITIONER)  
53. 9G-1950 [1] RESISTOR  
54. 127-6425 [1] HARNESS AS-HEATER & AIR COND  
  3S-2093 [10] STRAP-CABLE  
  6T-6505 [5] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  9P-2300 [3] GROMMET  
  8T-8737 [4] PLUG-SEAL  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
55. 130-3304 [1] CASE AS  
  6K-3274 [4] PLATE-RIVET  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [4] LINK  
  033-7291 [4] RIVET  
56. 3E-6277 [1] HOUSING AS  
57. 149-8203 [1] VALVE AS-WATER  
  4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
  4M-6582 [1] SEAL-O-RING  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  124-0312 [4] SCREW-PAN HEAD (8-16X0.32-IN)  
58. 8T-4171 M [2] BOLT (M6X1X12-MM)  
59. 149-8218 [1] CONTROL AS-BOARD  
  8T-8737 [2] PLUG-SEAL  
  9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8810 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
60. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
61. 4M-6582 [1] SEAL-O-RING  
62. 130-5685 [1] ANGLE  
63. 5P-5908 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Special Instruction
Installing Maintenance Free Linkage Seals{6107}
Installing Maintenance Free Linkage Seals{6107}
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Procedure for Weld Repair for the Lift Arm Assembly {0679, 6107, 6119}
Procedure for Weld Repair for the Lift Arm Assembly {0679, 6107, 6119}
Repair of Large Wheel Loader Lift Arms And Levers {6107, 6117, 6118, 6119, 6513, 7069}
Repair of Large Wheel Loader Lift Arms And Levers {6107, 6117, 6118, 6119, 6513, 7069}
Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119}
Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119}
Routine Inspection of Certain Wheel Loader Heavy Structures {0374, 0679, 5063, 6107, 6118, 6119, 6513, 7051, 7069}
Routine Inspection of Certain Wheel Loader Heavy Structures {0374, 0679, 5063, 6107, 6118, 6119, 6513, 7051, 7069}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Specifications
Bucket Control Mounting Group
990 WHEEL LOADER HYDRAULIC SYSTEM
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Disassembly and Assembly
Bucket Link
990 WHEEL LOADER MACHINE SYSTEMS
Tilt Lever
990 WHEEL LOADER MACHINE SYSTEMS
Lift Arm Assembly
990 WHEEL LOADER MACHINE SYSTEMS
Service Magazine
Special Instruction, Installing Maintenance Free Linkage Seals Available {6107}
1997/02/24
Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07
New Position Sensor For Payload Control System And Implement Control System Features Improved Sealing {1408}
1999/04/19
Special Instructions, REHS1466, "Conversion Requirements for 990 and 990 Series II Buckets and Bucket Pin" {6001, 6108}
2002/12/23
Receiving Sleeve Assembly Available for Removal of Bucket Linkage Pins and Installation of Bucket Linkage Pins {0739}
2004/05/10
Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119}
Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119}
Discontinue The Use Of All 4C-9484 Adapters {0739}
2006/10/16

Caterpillar Parts SIS Catalog 990 II :

ARM & BEARING AS-LIFT
189-7104 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
188-9293 ARM & BEARING AS-LIFT
VALVE GP-STEERING NEUTRALIZER
9T-7427 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
9T-7426 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
9T-7426 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING
6E-2926 VALVE GP-STEERING
VALVE GP-STEERING
6E-2925 VALVE GP-STEERING
VALVE GP-STEERING
6E-2925 VALVE GP-STEERING
CONTROL GP-BUCKET
8R-5627 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8R-5627 CONTROL GP-BUCKET
LEVER GP-TILT
188-9294 LEVER GP-TILT
2Z-9990 LIFT AR
ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
AIR COMPRESSOR GP-SEAT
237-3970 AIR COMPRESSOR GP-SEAT
118-7645 AIR CONDITIONER AR

Truck sale:

2005 CAT 990 II
USD $249,500 
2005 CAT 990 II

Kiewit Equipment
Portsmouth, Virginia
2000 CAT 990 II
Call 
2000 CAT 990 II

Chepstow Plant International LTD
Caldicot, England, United Kingdom
 
 
CAT 990 II

H & R Construction Parts & Equipment
Buffalo, New York
1999 CAT 990 II
Call 
1999 CAT 990 II

AS Roger Jensen Trading Co.Ltd.
 
 
CAT 990 II

TAC Parts (Formerly Parts & Equipment)
Uhrichsville, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.