AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

117-7959 WIRING GP-CONSOLE S/N 6TL1-284 PART OF 123-9714 OPERATOR AR M312 EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR M312 EXCAVATOR 6TL
 M312 Excavator 6TL00001-00409 (MACHINE) POWERED BY 3054 Engine SEBP2433 M312 6TL   (1988)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
WIRING GP-CONTROL
137-9413 WIRING GP-CONTROL
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
 

#SEBP24330130
 

117-7959: WIRING GP-CONSOLE

117-7959 WIRING GP-CONSOLE
S/N 6TL1-284
PART OF 123-9714 OPERATOR AR
i00476176 SEBP2433
1177959 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-6678 [1] GROMMET  
2. 8U-1110 [2] CONNECTOR  
3. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
4. 116-7317 [1] PLATE  
5. 117-3187 [1] SWITCH AS (START, PILOT)  
6. 120-6920 [1] HARNESS AS  
7. 126-0928 [1] HARNESS AS  
8. 125-6083 [1] SCREW-PAN HEAD  
9. 130-8268 [2] SCREW-PAN HEAD  
10. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
11. 5W-1992 [4] TERMINAL  
12. 128-1423 BE SEAL  
13. 3H-2900 [1] GROMMET  
  9X-6772 BF STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24330131
 

117-7959: WIRING GP-CONSOLE

117-7959 WIRING GP-CONSOLE
S/N 6TL285-409
PART OF 123-9714 OPERATOR AR
i00638347 SEBP2433
1177959 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
2. 8T-0328 C [3] WASHER-HARD (5.5X10X1-MM THK)  
3. 8U-1110 [2] CONNECTOR  
4. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
5. 116-7317 [1] PLATE  
6. 117-3187 [1] SWITCH AS (START, PILOT)  
7. 120-6920 [1] HARNESS AS  
8. 126-0928 [1] HARNESS AS  
9. 139-2350 C [1] STRAP-CABLE  
10. 139-2351 C [3] STRAP-CABLE  
11. 144-0629 C [1] PLATE  
12. 144-0630 C [1] PLATE  
13. 125-6083 [1] SCREW-PAN HEAD  
14. 130-8268 [2] SCREW-PAN HEAD  
15. 142-8545 CM [1] BOLT (M16X2X20-MM)  
16. 3H-2900 [1] GROMMET  
17. 5C-2874 CM [3] NUT (M5X0.8-THD)  
18. 6V-7743 CM [2] LOCKNUT (M6X1-THD)  
19. 8T-4138 CM [2] BOLT (M6X1X20-MM)  
20. 9X-8244 CM [1] LOCKNUT (M16X2-THD)  
21. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
22. 5W-1992 C [4] TERMINAL  
23. 128-1423 CE [2] SEAL (19CM EACH)  
24. 128-1423 CE SEAL (5CM)  
25. 9X-6772 B [5] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP24330132
 

137-9413: WIRING GP-CONTROL

137-9413 WIRING GP-CONTROL
S/N 6TL1-409
PART OF 138-3364, 138-3365 CONTROL AR-AUXILIARY
AN ATTACHMENT
i00509074 SEBP2433
1379413 WIRING GP-CONTROL Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8804 [2] KIT-RECEPTACLE (4-PIN)  
2. 3E-3377 [2] WEDGE-RECEPTACLE LOCK (4-PIN)  
3. 8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 120-5969 [2] DIODE AS  
5. 163-5870 [2] CONNECTOR AS  
6. 123-8634 [2] BLOCK-LOCK  
7. 164-6401 [1] HARNESS AS  
8. 096-0061 B [10] STRAP-CABLE  
  147-7817 F [1] FILM-IDENTIFICATION (AUX HYD FUNCTION)  
    (LOCATED UNDER GENERIC RELAY FILM)
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP24330133
 

123-9715: WIRING GP-MACHINE

123-9715 WIRING GP-MACHINE
S/N 6TL1-158
PART OF 123-9714 OPERATOR AR
i00516061 SEBP2433
1239715 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14 CM)  
2. 8U-5041 [1] COVER  
3. 119-3405 [1] SWITCH AS (PEDAL TRAVEL)  
4. 119-5856 [1] CONTROL AS-GOVERNOR ACTUATOR  
5. 120-6921 [1] HARNESS AS  
6. 120-6922 [1] HARNESS AS (CONSOLE)  
7. 120-6923 [1] HARNESS AS  
8. 122-4695 [1] BRACKET  
9. 124-0329 [2] RESISTOR  
10. 124-3461 [1] PLATE AS  
11. 125-3474 [1] CONTROL AS-ELECTRONIC  
12. 125-3513 [1] BRACKET  
13. 125-6566 [1] WIRE AS  
14. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
15. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 5I-3054 M [1] NUT (M4X0.7-THD)  
19. 5W-5038 [1] WASHER (4.3X9X0.8-MM THK)  
20. 6V-9492 M [1] SCREW-MACHINE (M4X0.7X25-MM)  
21. 7X-2535 M [1] BOLT (M6X1X60-MM)  
22. 8T-4171 M [2] BOLT (M6X1X12-MM)  
23. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24330134
 

123-9715: WIRING GP-MACHINE

123-9715 WIRING GP-MACHINE
S/N 6TL159-168
PART OF 123-9714 OPERATOR AR
i00789276 SEBP2433
1239715 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
2. 5W-5038 [1] WASHER (4.3X9X0.8-MM THK)  
3. 8U-5041 [1] COVER  
4. 119-3405 [1] SWITCH AS (PEDAL TRAVEL)  
5. 119-5856 [1] CONTROL AS-GOVERNOR ACTUATOR  
6. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
7. 120-6922 [1] HARNESS AS (CONSOLE)  
8. 120-6923 [1] HARNESS AS  
9. 122-4695 [1] BRACKET  
10. 124-0329 [2] RESISTOR  
11. 124-3461 [1] PLATE AS  
12. 125-3474 [1] CONTROL AS-ELECTRONIC  
13. 125-3513 [1] BRACKET  
14. 125-6566 [1] WIRE AS  
15. 139-1060 C [1] HARNESS AS  
16. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
17. 3C-6969 M [4] NUT (M3X0.5-THD)  
18. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
19. 5I-3054 M [1] NUT (M4X0.7-THD)  
20. 6V-9492 M [1] SCREW-MACHINE (M4X0.7X25-MM)  
21. 7X-2535 M [1] BOLT (M6X1X60-MM)  
22. 8T-4171 M [2] BOLT (M6X1X12-MM)  
23. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24330135
 

123-9715: WIRING GP-MACHINE

123-9715 WIRING GP-MACHINE
S/N 6TL169-357
PART OF 123-9714 OPERATOR AR
i00643425 SEBP2433
1239715 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14 CM)  
2. 8U-5041 [1] COVER  
3. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
4. 120-6922 [1] HARNESS AS (CONSOLE)  
5. 120-6923 [1] HARNESS AS  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 125-3474 [1] CONTROL AS-ELECTRONIC  
9. 135-7608 C [1] PLATE AS  
10. 136-9421 C [1] SWITCH GP-LIMIT (PEDAL TRAVEL)  
  8U-2381 C [3] WASHER (13X19X1.5-MM THK)  
  136-9422 C [1] SWITCH AS  
11. 139-1060 [1] HARNESS AS  
12. 139-5317 C [1] PLATE  
13. 139-5688 C [1] CONTROL AS-ELECTRONIC  
14. 139-8284 C [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 CM [4] BOLT (M6X1X70-MM)  
20. 8T-4171 CM [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  096-0061 CBF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24330136
 

123-9715: WIRING GP-MACHINE

123-9715 WIRING GP-MACHINE
S/N 6TL358-409
PART OF 123-9714 OPERATOR AR
i00643426 SEBP2433
1239715 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14 CM)  
2. 117-3188 [1] COVER  
3. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
4. 120-6922 [1] HARNESS AS (CONSOLE)  
5. 120-6923 [1] HARNESS AS  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 147-8477 C [1] CONTROL AS-ENGINE & HYD PUMP  
9. 164-7250 [1] BRACKET AS  
10. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL TRAVEL)  
11. 144-7391 C [1] HARNESS AS  
12. 139-5317 [1] PLATE  
13. 143-9581 C [1] CONTROL AS-ELECTRONIC  
14. 139-8284 [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 M [4] BOLT (M6X1X70-MM)  
20. 8T-4171 M [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
22. 117-3190 [1] CONNECTOR (4-PIN)  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24330137
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 6TL1-231
PART OF 117-7954 CHASSIS AR
i00516069 SEBP2433
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] WASHER  
2. 3E-3387 [1] RECEPTACLE AS  
3. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
4. 5W-6315 [1] FITTING  
5. 5W-9323 [1] COVER  
6. 5W-9376 [1] SWITCH AS (AIR HORN)  
7. 5Y-2425 [2] WASHER (6.5X17.5X1.5-MM THK)  
8. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
9. 8U-2598 Y [1] WASHER GP-WINDOW  
10. 8U-6109 [1] SWITCH-BRAKE  
11. 8X-9618 [1] STRAP AS-GROUND  
12. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 127-5600 [1] HARNESS AS  
14. 119-9453 M [2] SCREW (M6X1X16-MM)  
15. 2W-9513 M [2] BOLT (M6X1X10-MM)  
16. 5C-7261 M [4] NUT (M8X1.25-THD)  
17. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 5P-8131 [1] GROMMET  
19. 6P-4467 [1] GROMMET  
20. 8T-4970 M [2] BOLT (M6X1X14-MM)  
21. 5P-0715 D HOSE (13M)  
98. 096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24330138
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 6TL232-409
PART OF 117-7954 CHASSIS AR
i00516071 SEBP2433
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3357 [1] RECEPTACLE AS  
2. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
3. 5W-6315 [1] FITTING  
4. 164-8366 [1] COVER  
5. 5W-9376 [1] SWITCH AS (AIR HORN)  
6. 8U-2598 Y [1] WASHER GP-WINDOW  
7. 8U-6109 [1] SWITCH-BRAKE  
8. 8X-9618 [1] STRAP AS-GROUND  
9. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 140-9123 C [1] HARNESS AS-PLATFORM  
11. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
12. 2W-9513 M [2] BOLT (M6X1X10-MM)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 5C-8917 CM [2] SCREW (M6X8-MM)  
15. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 5P-8131 [1] GROMMET  
17. 6P-4467 [1] GROMMET  
18. 5P-0715 DC HOSE (2.6M)  
19. 139-2350 C [6] STRAP-CABLE  
21. 3F-9556 [2] LOCKWASHER  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24330139
 

141-3995: WIRING GP-PRIORITY VALVE

141-3995 WIRING GP-PRIORITY VALVE
S/N 6TL1-409
PART OF 117-0665, 134-3762 VALVE & LINES GP-PRIORITY
AN ATTACHMENT
i00501387 SEBP2433
1413995 WIRING GP-PRIORITY VALVE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8327 [1] SWITCH-KEY (PRIORITY VALVE)  
2. 148-6631 [1] HARNESS AS  
3. 149-1028 [1] PLATE (PRIORITY)  
4. 096-0061 B [10] STRAP-CABLE  
  B   USE AS REQUIRED
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M312 :

WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-AIR CONDITIONER
172-3700 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WARNING GP-OVERLOAD
111-1917 WARNING GP-OVERLOAD
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
WIRING GP-CONTROL
137-9413 WIRING GP-CONTROL
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM

Truck sale:

Caterpillar M312, Construction
24,412 
Caterpillar M312, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
 
$24,298 USD 
CATERPILLAR M312 1999
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
 
$15,899 USD 
CATERPILLAR M312 2002
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
1999 CAT M312
USD $24,599 
1999 CAT M312

Budrolpol
2001 CAT M312
USD $46,900 
2001 CAT M312

MB Tractor & Equipment
Tilton, New Hampshire
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.