AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

953C Track-Type Loader Hydrostatic Drive 2ZN00001-01749 (MACHINE) POWERED BY 3116 Engine BASIC ENGINE Caterpillar SIS



TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN00001-01749 (MACHINE) POWERED BY 3116 Engine SEBP2434 953C 2ZN   (1996)

Parts group 953C:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
108-5759 CAMSHAFT GP
108-5759 CAMSHAFT GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CARRIER GP-SEAL
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
S/N 4TF19620-26795
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
S/N 4TF26796-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
103-0863 COVER GP-CYLINDER BLOCK
103-0863 COVER GP-CYLINDER BLOCK
S/N 4TF35267-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
S/N 4TF19620-35266
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
S/N 4TF28601-43692
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 4TF19620-23954
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 4TF28601-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
S/N 4TF19620-23954
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
S/N 4TF19620-24051
PART OF 107-7720 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@107-7720@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
S/N 4TF19620-24051
FIELD REPLACEMENT FOR @@@@@107-7609@@@@@
FIELD INSTALLATION
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
S/N 4TF19620-43692
PART OF 119-3067 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@119-3067@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
S/N 4TF24052-43692
FIELD REPLACEMENT FOR @@@@@119-3065@@@@@
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
S/N 4TF19620-43692
FIELD REPLACEMENT FOR @@@@@190-9066@@@@@
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
S/N 4TF41241-43692
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
S/N 4TF19620-43692
PART OF 159-0305, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
S/N 4TF41241-43692
PART OF 116-4803 ENGINE AR
CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
S/N 4TF19620-43692
FIELD REPLACEMENT FOR @@@@@140-7371@@@@@
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 4TF19620-24051
PART OF 4P-8264 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 4TF24052-43692
PART OF 4P-8264 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
110-9523 DAMPER & PULLEY GP
110-9523 DAMPER & PULLEY GP
S/N 4TF19630-43692
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2844 DAMPER & PULLEY GP
4P-2844 DAMPER & PULLEY GP
S/N 4TF27048-43692
PART OF 116-4803 ENGINE AR
DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
S/N 4TF19620-27047
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
S/N 4TF19620-27047
PART OF 116-4803 ENGINE AR
DRIVE GP-FAN
DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
S/N 4TF19620-43692
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
DRIVE GP-WATER PUMP
DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
ENGINE GP
456-2535 KIT-ENGINE GASKET
456-2535 KIT-ENGINE GASKET -REAR STRUCTURE
S/N 2ZN1-1749
KIT CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE REAR COVER, DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD INSTALLATION
FLYWHEEL GP
FLYWHEEL GP
100-3649 FLYWHEEL GP
100-3649 FLYWHEEL GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 4TF19620-41191; 4TF41193-41199; 4TF41201-41207; 4TF41209-41214; 4TF41216-41230; 4TF41232-41239
PART OF 116-4803, 116-4805 ENGINE AR
Type 2
ALSO AN ATTACHMENT
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 4TF19620-41191; 4TF41193-41199; 4TF41201-41207; 4TF41209-41214; 4TF41216-41230; 4TF41232-41239
PART OF 116-4803, 116-4805 ENGINE AR
Type 1
ALSO AN ATTACHMENT
GEAR GP-FRONT
115-4175 GEAR GP-FRONT
115-4175 GEAR GP-FRONT
S/N 4TF41241-41249; 4TF41251-41262; 4TF41264-41280; 4TF41282-41287; 4TF41289-41296; 4TF41298-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4W-1103 HOUSING GP-FLYWHEEL
4W-1103 HOUSING GP-FLYWHEEL
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 4TF19620-35266
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
S/N 4TF35267-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
HOUSING GP-FRONT
101-4539 HOUSING GP-FRONT
101-4539 HOUSING GP-FRONT
S/N 4TF19620-41191; 4TF41193-41199; 4TF41201-41207; 4TF41209-41214; 4TF41216-41230; 4TF41232-41239
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 4TF41241-41249; 4TF41251-41262; 4TF41264-41280; 4TF41282-41287; 4TF41289-41296; 4TF41298-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
461-6541 KIT-FRONT COVER GASKET
461-6541 KIT-FRONT COVER GASKET
S/N 2ZN1-1749
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD INSTALLATION
MODIFICATION GP-FRONT COVER
210-3884 MODIFICATION GP-FRONT COVER
210-3884 MODIFICATION GP-FRONT COVER
S/N 2ZN1-1749
FIELD INSTALLATION
LIFTING GP-ENGINE
LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE & XMSN
110-1384 MOUNTING GP-ENGINE & XMSN
110-1384 MOUNTING GP-ENGINE & XMSN
S/N 2ZN1-1749
PART OF 110-1380 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
103-5846 SUPPORT GP-ENGINE
103-5846 SUPPORT GP-ENGINE
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
7C-4532 DRAIN GP-ENGINE OIL
7C-4532 DRAIN GP-ENGINE OIL -SHUTOFF VALVE
S/N 4TF19620-43692
PROVIDES DRAIN VALVE FOR OIL PAN DRAIN
PART OF 116-4803, 116-4805 ENGINE AR
FOR USE WITH OIL PAN & DRAIN LINE.
ALSO AN ATTACHMENT
PAN GP-OIL
4W-0269 PAN GP-OIL
4W-0269 PAN GP-OIL -ENGINE
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
115-4084 PISTON & ROD GP
115-4084 PISTON & ROD GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
110-9523 DAMPER & PULLEY GP
110-9523 DAMPER & PULLEY GP
S/N 4TF19630-43692
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2844 DAMPER & PULLEY GP
4P-2844 DAMPER & PULLEY GP
S/N 4TF27048-43692
PART OF 116-4803 ENGINE AR
DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
S/N 4TF19620-27047
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
S/N 4TF19620-27047
PART OF 116-4803 ENGINE AR
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
PULLEY GP-FAN
118-5568 PULLEY GP-FAN
118-5568 PULLEY GP-FAN
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
111-4657 COVER GP-SOUND SUPPRESSION
111-4657 COVER GP-SOUND SUPPRESSION
S/N 4TF19620-43692
OIL PAN
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
PLATE GP-SOUND SUPPRESSION
7C-5034 PLATE GP-SOUND SUPPRESSION
7C-5034 PLATE GP-SOUND SUPPRESSION
S/N 4TF19620-43692
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
117-3807 SUPPRESSION AR-SOUND
117-3807 SUPPRESSION AR-SOUND
S/N 2ZN1-1749
COSA MARKET
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
9Y-1224 COVER GP-VALVE MECHANISM
9Y-1224 COVER GP-VALVE MECHANISM
S/N 4TF19620-43692
VALVE COVER
PART OF 116-4805 ENGINE AR
AN ATTACHMENT
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
ROCKER ARM GP
107-7722 ROCKER ARM GP
107-7722 ROCKER ARM GP
S/N 4TF19620-43692
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
ALSO AN ATTACHMENT
COVER GP-ENGINE
461-6541 KIT-FRONT COVER GASKET
461-6541 KIT-FRONT COVER GASKET
S/N 2ZN1-1749
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD INSTALLATION

Information:

(For parts list, see above)

Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Disassembly and Assembly
Air Compressor Drive Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
2009/04/13
Disassembly and Assembly
Engine Balancer Shaft - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Air Conditioner Belt - Inspect/Adjust/Replace
953C Track-Type Loader
Alternator and Fan Belts - Inspect/Adjust/Replace
953C Track-Type Loader
Disassembly and Assembly
Alternator Belt - Remove and Install
3116 Engine Supplement for 953C Track-Type Loader
Belt Tensioner - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Belt Tightener - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Belt Tightener - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Correction to Operation and Maintenance Manual , "Water Pump Belt - Adjust" {1357, 1357, 1357}
2003/07/07
New Maintenance Procedure in Operation and Maintenance Manual , "Water Pump Belt - Inspect/Adjust/Replace" {1357, 1357, 1357}
2003/07/14
New Belt Tensioner for Increased Belt Life {1358}
2003/08/11
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06
Disassembly and Assembly
Crankshaft Rear Seal Carrier - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Specifications
Flexible Coupling Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
2000/01/31
A New Engine Oil Pressure Switch Helps to Reduce Low Engine Oil Pressure Faults {1924}
2002/11/11
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
2014/10/08
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Gasket Used {1107}
1994/01/17
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Correction to Service Magazine, SEPD0533 , "A New Inlet Valve is Released for use in 3116 and in 3126 Machine Engines with Two Valve Configuration" {1105}
2000/07/17
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
A New Cylinder Head Gasket is Now Used {1100, 1124}
2008/12/29
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3114, 3116, and 3126 Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
953C Track-Type Loader
Specifications
Fan Drive
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Flywheel - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Flywheel - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3114, 3116, and 3126 Engines
Disassembly and Assembly
Gear Group (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Testing and Adjusting
Flywheel Housing - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Housing (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Housing (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Front Cover - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Disassembly and Assembly
Engine Lifting Bracket - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Specifications
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Service Magazine
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Operation and Maintenance Manual
Engine Oil Level - Check
953C Track-Type Loader
Engine Oil Sample - Obtain
953C Track-Type Loader
Specifications
Oil Pan Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21
New Oil Pan and Integral Seal {1302, 1302, 1302}
2003/10/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116, and 3126 Engines
Compression - Test
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Connecting Rod Bearings - Inspect
3114, 3116, and 3126 Engines
Piston Ring Groove - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Top Piston Rings Available {1215}
1999/03/15
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
2004/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Specifications
Air Cleaner Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
953C Track-Type Loader
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Alternators And Regulators
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Correction to Operation and Maintenance Manual , "Water Pump Belt - Adjust" {1357, 1357, 1357}
2003/07/07
New Maintenance Procedure in Operation and Maintenance Manual , "Water Pump Belt - Inspect/Adjust/Replace" {1357, 1357, 1357}
2003/07/14
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Correction to Operation and Maintenance Manual , "Water Pump Belt - Adjust" {1357, 1357, 1357}
2003/07/07
New Maintenance Procedure in Operation and Maintenance Manual , "Water Pump Belt - Inspect/Adjust/Replace" {1357, 1357, 1357}
2003/07/14
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash and Fuel Injector Timing - Check
953C Track-Type Loader
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3114, 3116, and 3126 Engines
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Rocker Shaft and Pushrod - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Gasket Used {1107}
1994/01/17
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Correction to Service Magazine, SEPD0533 , "A New Inlet Valve is Released for use in 3116 and in 3126 Machine Engines with Two Valve Configuration" {1105}
2000/07/17
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.