AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-2197 CRANKSHAFT GP S/N 4TF19620-43692 PART OF 116-4803, 116-4805 ENGINE AR ALSO AN ATTACHMENT 953C


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN00001-01749 (MACHINE) POWERED BY 3116 Engine SEBP2434 953C 2ZN   (1996)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
 

#SEBP24340020
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4TF19620-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
i00378468 SEBP2434
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 2W-8147 [1] GEAR (50-TEETH)(50 TEETH)  
4. 107-7602 [1] BEARING-THRUST  
  7C-6969 AB [1] BEARING-THRUST (0.5-MM OS)  
  7C-6970 AB [1] BEARING-THRUST (0.5-MM OS, 0.5-MM US)(0.5MM US/ 0.5MM OS)  
  7C-6966 AB [1] BEARING-THRUST (0.25-MM US)  
  7C-6967 AB [1] BEARING-THRUST (0.5-MM US)  
  AB [1] BEARING-THRUST (0.75-MM US)  
5. 101-1530 [3] BEARING-MAIN  
  7C-6974 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6975 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6971 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6972 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
6. 107-7708 [3] BEARING-MAIN  
  7C-6964 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6965 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6961 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6962 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE
    (REPAIR) THE REAR SEAL SURFACE OF THE
    CRANKSHAFT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24340021
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i00460558 SEBP2434
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24340022
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 4TF28601-43692
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i00522491 SEBP2434
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24340023
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4TF19620-23954
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
i00361454 SEBP2434
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [4] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340024
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
i00361455 SEBP2434
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340025
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4TF28601-43692
PART OF 116-4803, 116-4805 ENGINE AR
ALSO AN ATTACHMENT
i00361456 SEBP2434
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340026
 

7C-5826: CYLINDER BLOCK GP

7C-5826 CYLINDER BLOCK GP
S/N 4TF19620-23954
PART OF 2W-9746 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i00408567 SEBP2434
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  7C-6208 AF [1] SLEEVE-CYLINDER  
    (FOR SALVAGE OF DAMAGED CYL. BORES IN BLOCK. QUANTITY TO BE DETERMINED BY USER)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP24340027
 

107-7609: CYLINDER HEAD AS

107-7609 CYLINDER HEAD AS
S/N 4TF19620-24051
PART OF 107-7720 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@107-7720@@@@@
ALSO AN ATTACHMENT
i00474277 SEBP2434
1077609 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 4P-8378 [6] SEAT-VALVE  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

#SEBP24340028
 

107-7720: CYLINDER HEAD AS

107-7720 CYLINDER HEAD AS
S/N 4TF19620-24051
FIELD REPLACEMENT FOR @@@@@107-7609@@@@@
FIELD INSTALLATION
i00474377 SEBP2434
1077720 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 107-7609 Y [1] CYLINDER HEAD AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340029
 

119-3065: CYLINDER HEAD AS

119-3065 CYLINDER HEAD AS
S/N 4TF19620-43692
PART OF 119-3067 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@119-3067@@@@@
ALSO AN ATTACHMENT
i00519609 SEBP2434
1193065 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 126-0453 [6] INSERT-VALVE SEAT (INLET)  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

Information:

Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 953C :

COVER GP-VALVE MECHANISM
9Y-1224 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-SOUND SUPPRESSION
111-4657 COVER GP-SOUND SUPPRESSION
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
103-0863 COVER GP-CYLINDER BLOCK
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.