AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-5128 CYLINDER & MTG GP-RIPPER S/N 8TH1-99999 PART OF 1U-4453 RIPPER AR AN ATTACHMENT 953C TRACK LOADER


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN00001-01749 (MACHINE) POWERED BY 3116 Engine SEBP2434 953C 2ZN   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-RIPPER
3G-5128 CYLINDER & MTG GP-RIPPER
CYLINDER & SEAL GP-BUCKET
9V-8168 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
4T-9387 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-9387 CYLINDER GP-BUCKET
CYLINDER GP-LIFT
9T-3625 CYLINDER GP-LIFT
CYLINDER GP-RIPPER
3G-1296 CYLINDER GP-RIPPER
CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
MOUNTING GP-CYLINDER
8V-7370 MOUNTING GP-CYLINDER
 

#SEBP24340320
 

3G-5128: CYLINDER & MTG GP-RIPPER

3G-5128 CYLINDER & MTG GP-RIPPER
S/N 8TH1-99999
PART OF 1U-4453 RIPPER AR
AN ATTACHMENT
i00364696 SEBP2434
3G5128 CYLINDER & MTG GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1583 [2] PIN  
2. 7K-9203 [4] SEAL-LIP TYPE  
3. 3G-0472 [2] BEARING  
4. 3G-1582 [2] PIN  
5. 7K-9205 [4] SEAL-LIP TYPE  
6. 3G-1587 [2] BUSHING  
7. 7X-0292 [2] BOLT (3/8-16X4.5-IN)  
8. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
9. 7B-2289 [2] BOLT (1-1/4-12X2.25-IN)  
10. 3G-1066 [2] SPACER (34X90X18-MM THK)  
11. 3G-1585 [2] SPACER (66X100X35-MM THK)  
12. 3G-1296 Y [2] CYLINDER GP-RIPPER  
13. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
14. 9G-1216 [2] SPACER (17X94X12-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340321
 

9V-8168: CYLINDER & SEAL GP-BUCKET

9V-8168 CYLINDER & SEAL GP-BUCKET
S/N 2ZN1-1749
PART OF 198-8398, 8Y-9582 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i00445413 SEBP2434
9V8168 CYLINDER & SEAL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9387 Y [1] CYLINDER GP-BUCKET  
2. 7K-9204 [2] SEAL-LIP TYPE  
  7K-9202 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340322
 

4T-9387: CYLINDER GP-BUCKET

4T-9387 CYLINDER GP-BUCKET -MULTIPURPOSE
S/N 2ZN1-1749
101.6-MM ( 4.0-IN) BORE X 270-MM (10.6-IN) STROKE
PART OF 9V-8168 CYLINDER & SEAL GP-BUCKET
Type 1
AN ATTACHMENT
i00377299 SEBP2434
4T9387 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9386 [1] CYLINDER AS  
  4T-9862 [1] CAP AS  
2. 8J-5667 [1] BUSHING  
3. 7V-4240 [4] BLOCK  
4. 5J-5402 [1] SEAL AS  
5. 8C-9124 [1] SEAL AS  
6. 5J-8200 [1] SEAL-U-CUP  
7. 8C-9133 [1] SEAL  
8. 4T-9384 [1] ROD AS  
9. 7J-9688 [1] BUSHING  
10. 7J-6461 [1] CROWN  
11. 1H-8128 [1] SEAL-O-RING  
  2K-6830 [1] RING-BACKUP  
12. 9T-9258 [1] HEAD AS  
13. 7J-6469 [1] PISTON  
14. 6J-2797 [1] RING-WEAR  
15. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
  5P-8250 [1] WASHER (28X49X5-MM THK)  
16. 4T-5613 [1] RING-WEAR  
17. 8J-0484 [1] RING-RETAINING  
 

#SEBP24340323
 

4T-9387: CYLINDER GP-BUCKET

4T-9387 CYLINDER GP-BUCKET -MULTIPURPOSE
S/N 2ZN1-1749
101.6-MM ( 4.0-IN) BORE X 270-MM (10.6-IN) STROKE
PART OF 9V-8168 CYLINDER & SEAL GP-BUCKET
Type 2
AN ATTACHMENT
i01531806 SEBP2434
4T9387 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9384 [1] ROD AS  
1A. 7J-9688 [1] BUSHING  
2. 4T-9386 [1] CYLINDER AS  
2A. 4B-4626 [4] LUG (3/8-16-THD)  
2B. 8J-8489 [2] BOSS  
2C. 9T-7045 [2] ELBOW  
2D. 4T-9862 [1] CAP AS  
2E. 8J-5667 [1] BUSHING  
3. 7J-6461 [1] CROWN  
4. 7J-6469 [1] PISTON  
5. 9T-9258 [1] HEAD AS  
6. 289-2935 CJNP [1] SEAL AS-BUFFER  
7. 289-2946 CJNP [1] SEAL-U-CUP  
8. 1H-8128 JP [1] SEAL-O-RING  
9. 308-1845 CJNP [1] SEAL-WIPER  
10. 2K-6830 JP [1] RING-BACKUP  
11. 4T-5613 JN [1] RING-WEAR  
12. 5B-9385 [1] BOLT (1-14X2.5-IN)  
13. 5J-5402 JP [1] SEAL AS  
14. 5P-8250 [1] WASHER (28X49X5-MM THK)  
15. 6J-2797 JP [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  233-9205 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (STANDARD SIZE BORE)
  233-9207 N [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (OVERSIZE BORE 0.76-MM)
  240-6899 P [1] KIT-SEAL  
    (INCLUDES RINGS & SEALS)
    (STANDARD SIZE BORE)
    (ALL KITS ABOVE FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   KIT MARKED P SERVICES PART(S) MARKED P
 

#SEBP24340324
 

9T-3625: CYLINDER GP-LIFT

9T-3625 CYLINDER GP-LIFT
S/N 2ZN1-1749
120.7 MM (4.8 IN) BORE X 711 MM (28 IN) STROKE
PART OF 110-0917 HYDRAULIC AR-2 VALVE
i00433566 SEBP2434
9T3625 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3624 [1] CYLINDER AS  
2. 1U-0563 [1] BEARING  
3. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
4. 4T-8588 J [1] SEAL AS  
5. 8T-8390 J [1] RING-WEAR  
6. 8T-0785 CJ [1] RING-WEAR  
7. 2J-3961 J [1] RING-BACKUP  
8. 175-7903 CJ [1] SEAL-O-RING  
9. 225-3281 J [1] SEAL-WIPER  
10. 9T-3611 [1] ROD AS  
11. 120-6679 C [1] HEAD  
12. 289-2948 CJ [1] SEAL-U-CUP  
13. 9T-8199 [1] PISTON  
14. 289-2937 CJ [1] SEAL AS-BUFFER  
15. 173-9682 CM [1] BOLT (M36X4X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  234-1948 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24340325
 

3G-1296: CYLINDER GP-RIPPER

3G-1296 CYLINDER GP-RIPPER
S/N 8TH1-99999
101.6MM (4.0 IN) BORE X 270MM (10.6 IN) STROKE
PART OF 3G-5128 CYLINDER & MTG GP-RIPPER
AN ATTACHMENT
i00363909 SEBP2434
3G1296 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS  
2. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
  8J-7415 [1] WASHER-HARD (28X51X4.5-MM THK)  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
  5J-5401 [1] RING-EXPANDER  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 3G-1294 [1] ROD AS  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
  2M-9780 [1] SEAL-O-RING  
11. 1H-8128 [1] SEAL-O-RING  
12. 9T-3964 C [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 2K-6830 [1] RING-BACKUP  
15. 4T-5613 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24340326
 

1U-0418: CYLINDER GP-TILT

1U-0418 CYLINDER GP-TILT
S/N 2ZN1-1749
139.7 MM (5.5 IN.) BORE X 478.0 MM (18.8 IN.) STROKE
PART OF 110-0917 HYDRAULIC AR-2 VALVE
i00353642 SEBP2434
1U0418 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0539 [1] CYLINDER AS  
2. 3G-5111 [1] BUSHING  
3. 6E-5188 [1] WASHER (57.53X89.45X13-MM THK)  
4. 3J-6899 [1] LOCKNUT (2-1/4-12-THD)  
5. 7J-1731 [1] RING-WEAR  
6. 4T-5173 [1] SEAL  
7. 1D-4638 [2] BOLT (1-8X3.5-IN)  
8. 5P-8250 [4] WASHER (28X49X5-MM THK)  
9. 167-2319 [1] SEAL-U-CUP  
10. 167-2469 [1] SEAL-WIPER  
11. 6E-5187 [1] ROD AS  
12. 3G-5111 [1] BUSHING  
13. 121-7926 C [1] HEAD  
14. 167-2208 [1] SEAL AS-BUFFER  
15. 8J-1688 C [1] SEAL-O-RING  
  8J-1689 C [1] RING-BACKUP  
16. 1U-0533 [1] PISTON  
17. 1D-4642 [2] BOLT (1-8X5-IN)  
  8G-4080 [2] SPACER (31.8X50.8X38-MM THK)  
18. 8C-9153 [1] RING-WEAR  
19. 8T-8376 [1] SEAL-HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24340327
 

110-0917: HYDRAULIC AR-2 VALVE

110-0917 HYDRAULIC AR-2 VALVE
S/N 2ZN1-1749
PART OF 110-0500 GENERAL AR
i00757956 SEBP2434
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  124-4683 Y [1] CONTROL GP-HYDRAULIC HAND  
  9T-3625 Y [2] CYLINDER GP-LIFT  
  1U-0418 Y [1] CYLINDER GP-TILT  
  7P-7016 Y [1] KICKOUT & POSITIONER GP  
  132-4670 Y [1] LINES GP-LIFT CYLINDER  
  110-1390 Y [1] LINES GP-PUMP  
  7P-2640 Y [1] LINES GP-TILT CYLINDER  
  7P-2641 Y [1] MOUNTING GP-HYDRAULIC TANK  
  110-1386 Y [1] PUMP GP-VANE  
    S/N 2ZN1-1168;1183-1229
  149-4699 Y [1] PUMP GP-VANE  
    S/N 2ZN1169-1182;1230-1749
  110-1385 Y [1] TANK & VALVE GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340328
 

113-0653: HYDRAULIC AR-3 VALVE

113-0653 HYDRAULIC AR-3 VALVE
S/N 2ZN1-1749
FRONT AND REAR LINES WITH DIVERTER
AN ATTACHMENT
i00471476 SEBP2434
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-0993 Y [1] CONTROL GP-DIVERTER  
  124-4686 Y [1] CONTROL GP-HYDRAULIC HAND  
  125-6578 Y [1] LINES GP-ATTACHMENT  
  7P-2655 Y [1] LINES GP-FRONT  
  113-0655 Y [1] LINES GP-REAR ATTACHMENT  
  113-0654 Y [1] TANK & VALVE GP-HYDRAULIC  
   
  6V-2436 [1] FILM-INSTRUCTION (MULTIPURPOSE BUCKET)(BUCKET)  
  6V-2435 [1] FILM-INSTRUCTION (RIPPER)(RIPPER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340329
 

113-0658: HYDRAULIC AR-3 VALVE

113-0658 HYDRAULIC AR-3 VALVE
S/N 2ZN1-1749
REAR ATTACHMENT
AN ATTACHMENT
i00471522 SEBP2434
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  124-4686 Y [1] CONTROL GP-HYDRAULIC HAND  
  125-6578 Y [1] LINES GP-ATTACHMENT  
  113-0655 Y [1] LINES GP-REAR ATTACHMENT  
  113-0654 Y [1] TANK & VALVE GP-HYDRAULIC  
   
  6V-2435 [1] FILM-INSTRUCTION (RIPPER)(RIPPER)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Front Guard Changed To Prevent Interference With Tilt Cylinder
Front Guard Changed To Prevent Interference With Tilt Cylinder
953C LIFT CYLINDER BOLT TORQUE
953C LIFT CYLINDER BOLT TORQUE
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
953C TRACK-TYPE LOADER HYDRAULICS
Ripper Cylinder Mounting Group
953C TRACK-TYPE LOADER HYDRAULICS
Ripper Cylinder
953C Track-Type Loader Hydraulic System
Ripper Cylinder Mounting Group
953C Track-Type Loader Hydraulic System
Multi-Purpose Bucket Cylinder
953C Track-Type Loader Hydraulic System
Tilt Cylinder
953C Track-Type Loader Hydraulic System
Lift Cylinder
953C Track-Type Loader Hydraulic System
Relief Valve for Head End of Tilt and Lift Cylinders
953C Track-Type Loader Hydraulic System
Relief Valve for Rod End of Tilt Cylinder
953C Track-Type Loader Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinders
953C TRACK LOADER MACHINE SYSTEM
Tilt Cylinder
953C TRACK LOADER MACHINE SYSTEM
Tilt Cylinder - Disassemble
953C Track-Type Loader Machine Systems
Tilt Cylinder - Assemble
953C Track-Type Loader Machine Systems
Lift Cylinder - Remove
953C Track-Type Loader Machine Systems
Lift Cylinder - Install
953C Track-Type Loader Machine Systems
Tilt Cylinder - Remove
953C Track-Type Loader Machine Systems
Lift Cylinder - Disassemble
953C Track-Type Loader Machine Systems
Lift Cylinder - Assemble
953C Track-Type Loader Machine Systems
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Correction to Disassembly and Assembly , "Disassemble and Assemble Lift Cylinders" {5102}
2002/01/21
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Tilt Cylinder and Lines Are Now Used {5057, 5104}
2003/06/09
Improved Wiper Seals Are Now Available {5102, 5104, 5352, 5356}
2004/06/21
Correction to Testing and Adjusting , "Bulldozer Lift Cylinders" {5050, 5102}
2005/04/18
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 953C :

CONTROL GP-DIVERTER
117-0993 CONTROL GP-DIVERTER
CARTRIDGE GP-VANE PUMP
135-2944 CARTRIDGE GP-VANE PUMP
CARTRIDGE GP-VANE PUMP
116-4063 CARTRIDGE GP-VANE PUMP
LINES GP-BRAKE
110-0932 LINES GP-BRAKE
LINES GP-BRAKE
110-0932 LINES GP-BRAKE
8Y-5344 UNDERCARRIAGE AR
8E-5281 TRACK GP
8E-5280 TRACK GP
CYLINDER & SEAL GP-BUCKET
9V-8168 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BUCKET
4T-9387 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
4T-9387 CYLINDER GP-BUCKET
CYLINDER GP-LIFT
9T-3625 CYLINDER GP-LIFT
CYLINDER GP-RIPPER
3G-1296 CYLINDER GP-RIPPER
CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
110-0917 HYDRAULIC AR-2 VALVE
113-0653 HYDRAULIC AR-3 VALVE

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.