WORK TOOLS
BUCKET GPGROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP
WORK TOOLS
BUCKET GP
#SEBP24340450
198-8399: BUCKET GP-MULTIPURPOSE
198-8399 BUCKET GP-MULTIPURPOSE -TRASH
S/N 2ZN1-1749
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 198-8398 BUCKET AR-MULTIPURPOSE, 5Q-5762 GUARD AS-TRASH
AN ATTACHMENT
S/N 2ZN1-1749
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 198-8398 BUCKET AR-MULTIPURPOSE, 5Q-5762 GUARD AS-TRASH
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-8082 | [2] | BIT-END | |
| 2. | 8V-7419 | [2] | PIN AS | |
| 3. | 7X-0365 | [2] | BOLT (3/4-10X1.5-IN) | |
| 4. | 7X-0582 | [2] | WASHER-HARD (20X44.5X6-MM THK) | |
| 5. | 9K-9731 | [2] | SPACER (20.4X28.5X14.2-MM THK) | |
| 6. | 3K-8150 | [1] | LUG | |
| 7. | 4F-3654 | [17] | BOLT-PLOW (5/8-11X2-IN) | |
| 8. | 7X-0448 | [17] | NUT (5/8-11-THD) | |
| 9. | 4T-8083 | [1] | EDGE-CUTTING | |
| 10. | 5B-3807 | [1] | PLATE-FILLER | |
| 11. | 4F-2699 | [1] | BLOCK-STOP | |
| 12. | 147-2253 | [1] | BOWL AS | |
| 13. | 5G-8267 | [1] | EDGE-CUTTING | |
| 14. | 5G-8269 | [2] | BIT-END | |
| 15. | 8P-9770 | [1] | PLATE | |
| 16. | 9V-6572 | [1] | EDGE-CUTTING | |
| 17. | 6V-3607 | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | |
| 18. | 4K-0149 | [2] | PLUG-CUP | |
| 19. | 5V-7396 | [1] | CORNER (RH) | |
| 20. | 7V-3997 | [4] | BAR | |
| 21. | 9C-0729 | [2] | HINGE | |
| 22. | 5V-7395 | [1] | CORNER (LH) | |
| 23. | 8V-9327 | [1] | BULLDOZER AS | |
| 24. | 1V-7098 | [4] | BUSHING | |
| 25. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 26. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 27. | 8V-9489 | [1] | HINGE AS (LIFT-LH OUTER) | |
| 28. | 8V-9488 | [1] | HINGE AS (LIFT, INNER, LH)(LIFT-LH INNER) | |
| 29. | 8Y-4756 | [1] | HINGE AS (TILT, CENTER, LH)(TILT-LH) | |
| 30. | 8Y-4757 | [1] | HINGE AS (TILT-RH) | |
| 31. | 8V-9494 | [1] | HINGE AS (LIFT, INNER, RH)(LIFT-RH INNER) | |
| 32. | 8V-9495 | [1] | HINGE AS (LIFT-RH OUTER) |
#SEBP24340451
8Y-9583: BUCKET GP-MULTIPURPOSE
8Y-9583 BUCKET GP-MULTIPURPOSE
S/N 2ZN1-1749
1.5 CU M(2.0 CU YD) CAPACITY
PART OF 8Y-9582 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
S/N 2ZN1-1749
1.5 CU M(2.0 CU YD) CAPACITY
PART OF 8Y-9582 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8V-9327 | [1] | BULLDOZER AS | |
| 2. | 1V-7098 | [4] | BUSHING | |
| 3. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 4. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF)(BEARING) | |
| 5. | 8V-9489 | [1] | HINGE AS | |
| 6. | 8V-9488 | [1] | HINGE AS (LIFT, INNER, LH) | |
| 7. | 8Y-4756 | [1] | HINGE AS (TILT, CENTER, LH) | |
| 8. | 8Y-4757 | [1] | HINGE AS | |
| 9. | 8V-9494 | [1] | HINGE AS (LIFT, INNER, RH) | |
| 10. | 8V-9495 | [1] | HINGE AS | |
| 11. | 2V-7177 | [4] | BLOCK | |
| 12. | 1V-8098 | [4] | BLOCK | |
| 13. | 5D-2643 | [2] | LUG | |
| 14. | 8V-7419 | [2] | PIN AS | |
| 15. | 7X-0365 | [2] | BOLT (3/4-10X1.5-IN) | |
| 7X-0582 | [2] | WASHER-HARD (20X44.5X6-MM THK) | ||
| 9K-9731 | [2] | SPACER (20.4X28.5X14.2-MM THK) | ||
| 16. | 4F-3654 | [17] | BOLT-PLOW (5/8-11X2-IN) | |
| 7X-0448 | [17] | NUT (5/8-11-THD) | ||
| 17. | 4T-8083 | [1] | EDGE-CUTTING | |
| 18. | 3K-8150 | [1] | LUG | |
| 4F-2699 | [1] | BLOCK-STOP | ||
| 5B-3807 | [1] | PLATE-FILLER | ||
| 19. | 4T-8082 | [2] | BIT-END | |
| 20. | 147-2253 | [1] | BOWL AS | |
| 21. | 9V-6572 | [1] | EDGE-CUTTING | |
| 22. | 8P-9770 | [1] | PLATE | |
| 23. | 5G-8269 | [2] | BIT-END | |
| 24. | 5G-8267 | [1] | EDGE-CUTTING | |
| 25. | 6V-3607 | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | |
| 26. | 4K-0149 | [2] | PLUG-CUP | |
| 27. | 5V-7395 | [1] | CORNER (LH) | |
| 28. | 7V-3997 | [2] | BAR | |
| 29. | 9C-0729 | [2] | HINGE | |
| 30. | 5V-7396 | [1] | CORNER (RH) |
#SEBP24340452
3G-4428: EDGE GP-BIT & CUTTING
3G-4428 EDGE GP-BIT & CUTTING
S/N 2ZN1-1749
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET
AN ATTACHMENT
S/N 2ZN1-1749
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0295 | [2] | EDGE-CUTTING | |
| 2. | 4T-8091 | [2] | EDGE-END | |
| 3. | 253-0062 | [1] | GUARD-BUCKET CORNER (RH) | |
| 4. | 253-0063 | [1] | GUARD-BUCKET CORNER (LH) | |
| 5. | 1J-5607 | [10] | BOLT-PLOW (1-8X2.75-IN) | |
| 6. | 2J-3507 | [10] | NUT-FULL (1-8-THD) | |
| 7. | 3K-9770 | [4] | NUT-FULL (1-1/4-7-THD) | |
| 8. | 8T-9079 | [4] | BOLT-PLOW (1-1/4-7X3.35-IN) |
#SEBP24340453
132-1054: EDGE GP-CUTTING
132-1054 EDGE GP-CUTTING
S/N 2ZN1-1749
35MM THICK EDGES. HEAVY DUTY
FIELD INSTALLATION
S/N 2ZN1-1749
35MM THICK EDGES. HEAVY DUTY
FIELD INSTALLATION
For full view, you need register
#SEBP24340454
133-0687: EDGE GP-CUTTING
133-0687 EDGE GP-CUTTING
S/N 2ZN1-1749
FOR USE WITH @@@@@ 8Y-9100@@@@@, GENERAL PURPOSE, MULTIPURPOSE BUCKETS
AN ATTACHMENT
S/N 2ZN1-1749
FOR USE WITH @@@@@ 8Y-9100@@@@@, GENERAL PURPOSE, MULTIPURPOSE BUCKETS
AN ATTACHMENT
For full view, you need register
#SEBP24340455
7T-9325: EDGE GP-CUTTING
7T-9325 EDGE GP-CUTTING
S/N 2ZN1-1749
25-MM THICK
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
S/N 2ZN1-1749
25-MM THICK
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
For full view, you need register
#SEBP24340456
5Q-5762: GUARD AS-TRASH
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 198-8399 Y | [1] | BUCKET GP-MULTIPURPOSE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24340457
519-8491: GUARD-BUCKET CORNER
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP24340458
519-8492: GUARD-BUCKET CORNER
For full view, you need register
Parts for your 953C TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP24340459
186-2712: KIT-BUCKET
186-2712 KIT-BUCKET
S/N 2ZN1-1749
PROVIDES ADDITIONAL GUSSETS FOR GENERAL PURPOSE BUCKETS
FOR USE WITH @@@@@ 8Y-9100@@@@@, @@@@@ 8Y-9101@@@@@
FIELD INSTALLATION
S/N 2ZN1-1749
PROVIDES ADDITIONAL GUSSETS FOR GENERAL PURPOSE BUCKETS
FOR USE WITH @@@@@ 8Y-9100@@@@@, @@@@@ 8Y-9101@@@@@
FIELD INSTALLATION
For full view, you need register
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
