AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-8263 CYLINDER HEAD GP S/N 98Z15029-UP PART OF 4P-8264 CYLINDER HEAD GP FIELD REPLACEMENT FOR @@@@@160-5130@@@@@ 325B L


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
PAN GP-OIL
DRIVE GP-FAN
DRIVE GP-WATER PUMP
FLYWHEEL GP
GEAR GP

EXCAVATOR 325B L EXCAVATOR 2JR
 325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2435 325B L 2JR   (1996)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
 

#SEBP24350030
 

4P-8263: CYLINDER HEAD GP

4P-8263 CYLINDER HEAD GP
S/N 98Z15029-UP
PART OF 4P-8264 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@160-5130@@@@@
i00122103 SEBP2435
4P8263 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-3065 CY [1] CYLINDER HEAD AS  
2. 113-6180 [6] VALVE-INLET  
3. 136-0819 [6] VALVE-EXHAUST  
4. 1W-2715 [24] LOCK-RETAINER  
5. 7E-7779 [12] RETAINER-SPRING  
6. 7C-4273 [12] SPRING-VALVE  
7. 9Y-8848 [12] GUIDE-VALVE  
8. 119-3036 [12] SEAL-VALVE STEM  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24350031
 

4P-8264: CYLINDER HEAD GP

4P-8264 CYLINDER HEAD GP
S/N 98Z15029-32156
PART OF 131-3803 ENGINE AR
i00122104 SEBP2435
4P8264 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 4P-8263 Y [1] CYLINDER HEAD GP  
3. 8T-3282 [14] WASHER-HARD (22X35X3.5-MM THK)  
  127-4836 M [14] BOLT (M20X2.5X160-MM)  
4. 9S-8003 [3] PLUG (1/2-20-THD)  
5. 2M-6471 [2] PLUG-CUP  
6. 107-7832 [1] GASKET (1.60MM THK)  
  4P-2590 AB [1] GASKET-CYLINDER HEAD (1.85MM THK)  
7. 8T-5030 M [6] BOLT (M10X1.5X120-MM)  
8. 9S-8002 [1] PLUG (7/16-20-THD)  
9. 3J-7354 [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24350032
 

123-3215: DAMPER & PULLEY GP

123-3215 DAMPER & PULLEY GP
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
i00514124 SEBP2435
1233215 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-6088 [1] DAMPER AS  
2. 6I-4083 [1] PULLEY  
3. 6V-7981 M [8] BOLT (M10X1.5X70-MM)  
4. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24350033
 

136-8877: DRAIN GP-ENGINE OIL

136-8877 DRAIN GP-ENGINE OIL
S/N 98Z16560-UP
PART OF 131-3803 ENGINE AR
i00503762 SEBP2435
1368877 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 6V-7238 [1] VALVE-SHUTOFF (OIL DRAIN)  
 

#SEBP24350034
 

7C-4532: DRAIN GP-ENGINE OIL

7C-4532 DRAIN GP-ENGINE OIL
S/N 98Z15029-16559
PROVIDES A DRAIN VALVE FOR OIL PAN DRAIN
PART OF 131-3803 ENGINE AR
i00157910 SEBP2435
7C4532 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 6V-7238 [1] VALVE-SHUTOFF (ENGINE OIL PAN)  
 

#SEBP24350035
 

7C-0044: DRIVE GP-FAN

7C-0044 DRIVE GP-FAN
S/N 98Z15029-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 131-3803 ENGINE AR
FOR USE WITH INDUSTRIAL ENGINE WITH FAN DRIVE REQUIREMENTS
i00157908 SEBP2435
7C0044 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8365 [1] DRIVE GP-FAN  
1A. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
1B. 4W-1203 [2] CUP-BEARING  
1C. 4W-1204 [2] CONE-BEARING  
1D. 4W-2042 [1] SPACER (35.3X45.5X38.331-MM THK)  
1E. 6V-8004 M [1] BOLT (M12X1.75X120-MM)  
1F. 6V-9748 [1] SEAL-LIP TYPE  
1G. 7C-8366 [1] BRACKET AS  
1H. 7C-8369 [1] HUB  
1J. 7C-8370 [1] CAP-DUST (FAN DRIVE)  
1K. 7C-8634 [1] PLATE  
2. 6V-4249 M [4] BOLT (M10X1.5X50-MM)  
  M   METRIC PART
 

#SEBP24350036
 

4W-5428: DRIVE GP-WATER PUMP

4W-5428 DRIVE GP-WATER PUMP
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
i00122131 SEBP2435
4W5428 DRIVE GP-WATER PUMP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-6775 [1] V-BELT (PUMP DRIVE)(WATER)  
2. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
3. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
4. 115-4204 [1] PULLEY AS-IDLER  
  115-4237 [1] PULLEY-IDLER  
4A. 2L-8509 [1] RING-LOCK  
4B. 117-7114 [1] BEARING AS-BALL  
4C. 100-6267 [1] PLATE AS-IDLER  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
7. 4F-3714 [1] WASHER (0.375X1.5X0.135-IN THK)  
  M   METRIC PART
 

#SEBP24350037
 

9Y-6092: FLYWHEEL GP

9Y-6092 FLYWHEEL GP
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
i00444541 SEBP2435
9Y6092 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-8180 [1] FLYWHEEL AS  
2. 1W-1064 [1] GEAR-FLYWHEEL RING (126-TEETH)  
3. 9Y-7734 M [8] BOLT-LOCKING (M12X1.75X45-MM)(M12X1.75X45MM)  
4. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP24350038
 

101-4540: GEAR GP-FRONT

101-4540 GEAR GP-FRONT
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
Type 1
i00122932 SEBP2435
1014540 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8476 [1] GEAR AS-IDLER (50-TEETH)  
1A. 2W-7566 [1] BUSHING  
2. 101-3208 [1] PLATE-RETAINING  
3. 7W-9740 [1] GEAR AS-IDLER (43-TEETH)  
3A. 7W-9930 [1] BUSHING  
4. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
5. 7W-9738 [1] WASHER (10.5X38X1.6-MM THK)  
6. 7W-9737 [1] SHAFT  
7. 101-3207 [1] SHAFT-CAM IDLER  
8. 6V-5843 M [2] BOLT (M10X1.5X45-MM)  
9. 9X-2305 M [1] BOLT-LOCKING (M10X1.5X50-MM)  
  M   METRIC PART
 

#SEBP24350039
 

101-4540: GEAR GP-FRONT

101-4540 GEAR GP-FRONT
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
Type 2
i01579604 SEBP2435
1014540 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8476 [1] GEAR AS-IDLER (50-TEETH)  
1A. 2W-7566 [1] BUSHING  
2. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
3. 101-3207 [1] SHAFT-CAM IDLER  
4. 6V-5843 M [2] BOLT (M10X1.5X45-MM)  
5. 101-3208 [1] PLATE-RETAINING  
  M   METRIC PART
 

Information:

Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Inspect Certain 3116 And 3126 Engines Used In Claas CH 55 Tractors; 120H And 135H Motor Graders; 928G, 938G And 950G Wheel Loaders; IT28G And IT38G Tool Carriers; 613C Scrapers; 322B And 325B Excavators; CS563C, CP563C And CS583C Vibratory Compactors; AP1055B And BG245C Asphalt Pavers For Improperly Installed Injector Sleeves
Inspect Certain 3116 And 3126 Engines Used In Claas CH 55 Tractors; 120H And 135H Motor Graders; 928G, 938G And 950G Wheel Loaders; IT28G And IT38G Tool Carriers; 613C Scrapers; 322B And 325B Excavators; CS563C, CP563C And CS583C Vibratory Compactors; AP1055B And BG245C Asphalt Pavers For Improperly Installed Injector Sleeves
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Gasket Used {1107}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Correction to Service Magazine, SEPD0533 , "A New Inlet Valve is Released for use in 3116 and in 3126 Machine Engines with Two Valve Configuration" {1105}
2014/02/20
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
A New Cylinder Head Gasket is Now Used {1100, 1124}
2008/12/29

Caterpillar Parts SIS Catalog 325B L :

CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
DAMPER & PULLEY GP
123-3215 DAMPER & PULLEY GP
DRAIN GP-ENGINE OIL
136-8877 DRAIN GP-ENGINE OIL
DRAIN GP-ENGINE OIL
7C-4532 DRAIN GP-ENGINE OIL
DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
FLYWHEEL GP
9Y-6092 FLYWHEEL GP
GEAR GP-FRONT
101-4540 GEAR GP-FRONT

Truck sale:

Caterpillar 325BL, Construction
29,000 
Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT
 
 
Caterpillar 325BL, Construction
- Crawler Excavators
avspare
Caterpillar 325BL, Construction
43,400 
Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 325BL, Construction
31,000 
Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
CATERPILLAR 325BL 1998
 
CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.