168-7519 LINES GP-FUEL S/N 2JR1-UP PART OF 174-7054 TANK AR-FUEL AN ATTACHMENT 325B L EXCAVATOR

168-7519: LINES GP-FUEL

168-7519 LINES GP-FUEL
S/N 2JR1-UP
PART OF 174-7054 TANK AR-FUEL
AN ATTACHMENT

Parts for your 325B L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	103-2529 E		HOSE (69CM)
2.	6S-8620	[2]	CLAMP-HOSE
3.	003-7764	[3]	END-HOSE
4.	093-2064	[1]	GROMMET
5.	6B-1628	[1]	BUSHING-REDUCER
6.	128-4411	[2]	VALVE AS (FUEL SHUTOFF)
7.	2W-6818	[1]	KNOB
8.	172-6026	[1]	PLATE
9.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	184-4813	[1]	CABLE AS
12.	6V-8187	[2]	NUT (1/4-28-THD)
13.	174-4060	[1]	FILM-IDENTIFICATION (FUEL SHUTOFF)
14.	5K-6875	[2]	ADAPTER
15.	003-2143	[1]	ELBOW
16.	6V-5710	[1]	VALVE-BALL
17.	9X-2026	[1]	WASHER (6.5X17X1-MM THK)
18.	3B-4607	[1]	PIN-COTTER
19.	9S-1303	[1]	PIN
20.	8B-3768	[1]	ROD END
21.	7Y-0012	[1]	FILM-WARNING (TANK LIFTING)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

129-1671: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

129-1671 LINES GP-FUEL FILTER
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
2.	129-2145	[1]	TUBE AS
3.	129-1102 Y	[1]	BASE GP-FUEL FILTER
4.	6V-8724	[1]	ELBOW
5.	3J-1907	[13]	SEAL-O-RING
6.	129-1672	[1]	BRACKET
7.	6V-8397	[8]	SEAL-O-RING
8.	7X-2459	[2]	ADAPTER-TEE
9.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
10.	9S-4191	[3]	PLUG (9/16-18-THD)
11.	5F-7054	[1]	SEAL-O-RING
12.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
13.	4P-9696	[1]	TUBE AS
14.	7E-5189	[1]	VALVE AS (FUEL)
15.	8T-0151	[1]	ADAPTER
16.	5P-1046	[1]	CONNECTOR
17.	3N-3252	[1]	SPRING
18.	1P-1670	[1]	PLUG-SEAL
19.	5P-7813	[1]	SEAL-O-RING
20.	6V-9850	[1]	ELBOW
21.	129-2146	[1]	TUBE AS
22.	129-2147	[1]	TUBE AS
23.	5M-5689	[2]	CLAMP
24.	5C-2890 M	[1]	NUT (M6X1-THD)
25.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
26.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
27.	9S-1350	[1]	CLIP
28.	9W-4216	[1]	SPACER (9X18X7-MM THK)
29.	6V-8636	[2]	CONNECTOR
30.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
31.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
32.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
34.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
35.	1R-0753	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
36.	141-8275	[2]	VALVE-DRAIN (FUEL)
37.	5P-4961	[2]	CLAMP-HOSE
38.	103-2529 E		HOSE (195CM)
39.	096-0061	[1]	STRAP-CABLE
40.	1R-0751	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

4P-9693: LINES GP-FUEL RATIO CONTROL

LINES GP-FUEL RATIO CONTROL

4P-9693 LINES GP-FUEL RATIO CONTROL
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8647	[1]	CONNECTOR
2.	6V-8723	[1]	ELBOW
3.	4P-9694	[1]	TUBE AS
4.	3K-0360	[1]	SEAL-O-RING
5.	4J-5477	[1]	SEAL-O-RING
6.	3J-7354	[1]	SEAL-O-RING
7.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	6V-8397	[1]	SEAL-O-RING
9.	8M-2772	[1]	CLIP (LOOP)

7W-8434: LINES GP-GOVERNOR OIL

LINES GP-GOVERNOR OIL

7W-8434 LINES GP-GOVERNOR OIL
S/N 98Z15029-UP
PART OF 113-6190 GOVERNOR GP-UNIT INJECTOR

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8628	[1]	ELBOW
2.	7W-0367	[1]	TUBE AS
3.	6V-8647	[1]	CONNECTOR
4.	3J-7354	[2]	SEAL-O-RING
5.	4J-5477	[2]	SEAL-O-RING

107-7732: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z15029-18130
PART OF 131-3803 ENGINE AR

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-0849 M	[1]	BOLT-SOCKET HEAD (M6X1X25-MM)
2.	107-7733	[1]	INJECTOR GP-FUEL
2A.	114-8718	[1]	SEAL-O-RING
2B.	125-8274	[1]	SEAL-O-RING
	M		METRIC PART

107-7732: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z18131-UP
PART OF 131-3803 ENGINE AR
Type 1

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	139-5925 CM	[1]	BOLT-SOCKET HEAD (M6X1X30-MM)
2.	127-8216 C	[1]	INJECTOR GP-FUEL
3.	114-8718	[1]	SEAL-O-RING
4.	9X-8267 C	[1]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

107-7732: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z18131-UP
PART OF 131-3803 ENGINE AR
Type 2

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	139-5925 M	[1]	BOLT-SOCKET HEAD (M6X1X30-MM)
2.	127-8216	[1]	INJECTOR GP-FUEL
3.	114-8718	[1]	SEAL-O-RING
4.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

129-3230: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

129-3230 PUMP GP-FUEL PRIMING
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
Type 1

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-2605	[1]	PUMP AS-FUEL PRIMING
	1H-8171	[1]	SEAL-O-RING
	7E-5346	[2]	VALVE AS
2.	9Y-1760	[1]	BRACKET-PRIMING PUMP
3.	1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
4.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)
5.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
6.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
7.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
8.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
9.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
10.	113-0454 I	[1]	HOSE AS
11.	6V-8724	[1]	ELBOW
12.	3J-1907	[4]	SEAL-O-RING
13.	6V-8397	[2]	SEAL-O-RING
14.	8T-0151	[1]	ADAPTER
15.	5P-4924	[1]	ELBOW
16.	6V-8636	[1]	CONNECTOR
17.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
18.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
19.	129-3231	[1]	BRACKET AS
	8T-3597 M	[1]	NUT-WELD (M12X1.75-THD)
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

129-3230: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

129-3230 PUMP GP-FUEL PRIMING
S/N 98Z15029-UP
PART OF 131-3803 ENGINE AR
Type 2

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	183-2824 CY	[1]	PUMP GP-FUEL PRIMING (MANUAL)
2.	9Y-1760	[1]	BRACKET-PRIMING PUMP
3.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
4.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
5.	113-0454 I	[1]	HOSE AS
6.	6V-8724	[1]	ELBOW
7.	3J-1907	[4]	SEAL-O-RING
8.	6V-8397	[2]	SEAL-O-RING
9.	8T-0151	[1]	ADAPTER
10.	5P-4924	[1]	ELBOW
11.	6V-8636	[1]	CONNECTOR
12.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
13.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	129-3231	[1]	BRACKET AS
	8T-3597 M	[1]	NUT-WELD (M12X1.75-THD)
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

183-2824: PUMP GP-FUEL PRIMING

PUMP GP-FUEL PRIMING

183-2824 PUMP GP-FUEL PRIMING
S/N 98Z15029-UP
PART OF 129-3230 PUMP GP-FUEL PRIMING

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-8389	[1]	GASKET (FUEL PRIMING PUMP)
2.	183-2823	[1]	PUMP AS-FUEL PRIMING
3.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)
5.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
6.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

Information:

FUEL SYSTEM

LINES GP-FUEL

Special Instruction

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Service Letter-NACD

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-CFEL

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-CSARL

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Americas

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Brazil

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Specifications

Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Service Letter-China

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-APD

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Disassembly and Assembly

Fuel Filter & Fuel Filter Base
SUPPLEMENT FOR 325B & 325B L EXCAVATORS - 3116 ENGINE

Water Separator
SUPPLEMENT FOR 325B & 325B L EXCAVATORS - 3116 ENGINE

Service Magazine

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/02

Caterpillar Parts SIS Catalog 325B L :

Truck sale:

29,000

Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT

Caterpillar 325BL, Construction
- Crawler Excavators
avspare

43,400

Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.

31,000

Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY

CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia