AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

111-3769 PUMP GP-FUEL INJECTION S/N 6NC1-UP; R6J1-UP; 08Z91662-99999 PART OF 128-8806 PUMP GP-GOV & FUEL INJ 330B L


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
GOVERNOR GP
SEPARATOR GP-WATER

EXCAVATOR 330B L EXCAVATOR 6DR
 330B L Excavator 6DR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2437 330B L 6DR   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
397-3971 KIT-FUEL INJECTION PUMP
PROTECTION GP-FUEL SYSTEM
128-7984 PROTECTION GP-FUEL SYSTEM
PUMP GP-FUEL INJECTION
108-1548 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
111-3769 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
108-1545 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
128-8806 PUMP GP-GOV & FUEL INJ
 

#SEBP24370150
 

111-3769: PUMP GP-FUEL INJECTION

111-3769 PUMP GP-FUEL INJECTION
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 128-8806 PUMP GP-GOV & FUEL INJ
i00123167 SEBP2437
1113769 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
2. 4J-7533 [2] SEAL-O-RING  
3. 1W-3286 [1] RACK-REGULATOR  
4. 4P-9827 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 150-3724 [1] GASKET  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 111-3770 [1] CAMSHAFT AS  
  111-3771 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 [4] DOWEL  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 7N-7166 [2] RACE-THRUST BEARING  
21. 7L-3326 [1] BEARING-THRUST  
22. 4N-9019 [1] DOWEL  
23. 4P-9840 [1] HOUSING AS  
24. 1S-1953 [1] BEARING-RACK  
25. 1W-3285 [1] BEARING-RACK  
26. 6I-0979 [6] DOWEL  
27. 7N-7970 [1] BUSHING  
28. 4P-9828 [1] BUSHING  
29. 4P-8480 [6] PIN-PUMP GUIDE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370151
 

4P-9827: PUMP GP-FUEL INJECTION

4P-9827 PUMP GP-FUEL INJECTION
PART OF 397-3971 KIT-FUEL INJECTION PUMP, 108-1548, 111-3769 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00122112 SEBP2437
4P9827 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 6I-1327 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
5. 4P-9830 [1] PLUNGER AS  
6. 7C-5278 [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 [1] WASHER-RETAINING  
8. 7C-9966 [1] INSERT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24370152
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00157299 SEBP2437
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP24370153
 

137-6302: PUMP GP-FUEL PRM & PRIM FILTER

137-6302 PUMP GP-FUEL PRM & PRIM FILTER
S/N 6NC1-UP; 08Z91662-99999
PART OF 116-7567 ENGINE AR
AN ATTACHMENT
i01214856 SEBP2437
1376302 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-2215 [1] BRACKET AS  
  8T-5912 [2] NUT-WELD (3/8-16-THD)  
2. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
5. 5P-6944 [1] ADAPTER  
6. 5P-4924 [1] ELBOW  
7. 030-8194 [1] CONNECTOR  
8. 6I-0683 [1] TUBE AS-FUEL FILTER  
9. 8H-1603 [1] CLIP  
10. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
11. 030-7947 [1] ELBOW  
12. 5P-2645 [1] ELBOW  
13. 2M-9780 [1] SEAL-O-RING  
14. 3K-0360 [1] SEAL-O-RING  
15. 3J-1907 [2] SEAL-O-RING  
16. 3J-7354 [1] SEAL-O-RING  
17. 3V-3308 [1] WASHER-HARD (10.2X20.5X2.5-MM THK)  
18. 009-3215 [1] INSERT  
19. 7B-1597 [1] CLIP  
20. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
21. 8N-5251 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
22. 0S-1619 [1] BOLT (3/8-16X3-IN)  
23. 7K-3377 [1] PIPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370154
 

6I-1003: PUMP GP-FUEL PRM & PRIM FILTER

6I-1003 PUMP GP-FUEL PRM & PRIM FILTER
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 116-7568 ENGINE AR
i00391536 SEBP2437
6I1003 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-6174 C [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 0L-1351 C [2] BOLT (3/8-16X0.875-IN)  
3. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-3822 M [2] BOLT (M10X1.5X35-MM)  
5. 5P-6944 [1] ADAPTER  
6. 5P-4924 [1] ELBOW  
7. 030-8194 [1] CONNECTOR  
8. 6I-0683 [1] TUBE AS-FUEL FILTER  
9. 8H-1603 [1] CLIP  
10. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
11. 030-7947 [1] ELBOW  
12. 5P-2645 [1] ELBOW  
13. 2M-9780 [1] SEAL-O-RING  
14. 3K-0360 [1] SEAL-O-RING  
15. 3J-1907 [2] SEAL-O-RING  
16. 3J-7354 [1] SEAL-O-RING  
17. 3V-3308 [1] WASHER-HARD (10.2X20.5X2.5-MM THK)  
18. 009-3215 [1] INSERT  
19. 7B-1597 [1] CLIP  
20. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
21. 8N-5251 CY [1] PUMP GP-FUEL PRM & PRIM FILTER  
22. 0S-1619 C [1] BOLT (3/8-16X3-IN)  
23. 2K-5870 C [1] SPACER (0.675X0.428X2.06-IN THK)  
24. 4W-7629 [1] COVER  
25. 4M-8303 [1] SEAL-O-RING  
26. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
27. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370155
 

8N-5251: PUMP GP-FUEL PRM & PRIM FILTER

8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 137-6302, 6I-1003 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00157301 SEBP2437
8N5251 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3365 Y [1] PUMP GP-FUEL PRIMING  
2. 8H-2807 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] SEAL-RING (FUEL PRIMING PUMP)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 7S-9323 [1] SPRING  
8. 2H-3429 [1] RING-RETAINING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370156
 

1W-1695: PUMP GP-FUEL TRANSFER

1W-1695 PUMP GP-FUEL TRANSFER
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 2W-4160 PUMP & MTG GP-FUEL TRANSFER
OPTIONAL FIELD REPLACEMENT ORDER 1-279-4980 PUMP GP-FUEL TRANSFER, 1- 0R-3537 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
i00121975 SEBP2437
1W1695 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1698 [1] HOUSING-TRANSFER PUMP  
2. 1W-1699 [1] COVER  
3. 1W-5912 [1] GUIDE & TAPPET AS  
3A. 7N-8821 [1] RING-RETAINING  
4. 6J-2419 [1] SEAL-O-RING  
5. 7E-2464 C [3] VALVE AS-CHECK (FUEL TRANSFER PUMP)  
6. 3D-2824 [1] SEAL-O-RING  
7. 6F-6672 [1] SEAL-O-RING  
8. 3D-2898 [1] SEAL-O-RING  
9. 5P-8215 [1] SEAL-O-RING  
10. 7W-0134 [1] SPRING-PUMP  
11. 8N-2637 [1] WASHER (21.3X29.5X1.6-MM THK)  
12. 7E-3667 C [1] SPACER (25.46X28.86X1.84-MM THK)  
13. 8N-2641 [1] SLEEVE  
14. 1W-1669 [1] PISTON  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 6D-8498 [2] SCREW-HEAD  
17. 8N-2640 [1] COVER  
18. 7E-4656 [1] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24370157
 

108-1545: PUMP GP-GOV & FUEL INJ

108-1545 PUMP GP-GOV & FUEL INJ
S/N 6NC1-UP; 08Z91662-99999
PART OF 116-7567 ENGINE AR
AN ATTACHMENT
i00787557 SEBP2437
1081545 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1548 Y [1] PUMP GP-FUEL INJECTION  
2. 7L-8056 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-3088 [1] SHAFT AS-THROTTLE  
7. 8N-6680 [1] SCREEN AS  
8. 3J-1907 [1] SEAL-O-RING  
8A. 5P-6620 [1] SEAL-O-RING  
8B. 8J-8343 [1] SEAL-O-RING  
8C. 8M-8515 [1] SEAL-O-RING  
8D. 033-5879 [1] SEAL-O-RING  
8E. 144-0477 [1] GASKET  
8F. 150-3726 [1] GASKET  
8G. 150-3727 [1] GASKET-FUEL  
9. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
10. 8N-7276 Y [1] TORQUE CONTROL GP  
11. 2W-2410 Y [1] GOVERNOR GP  
12. 2W-5448 [1] COVER  
13. 8N-5784 [1] DEFLECTOR-PULSE  
14. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
15. 8L-5832 [1] NUT-HEX (10-32-THD)  
16. 7N-9907 [1] COVER  
17. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
18. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 2D-6392 [1] SEAL-O-RING  
21. 4W-5735 [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
22. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370158
 

128-8806: PUMP GP-GOV & FUEL INJ

128-8806 PUMP GP-GOV & FUEL INJ
S/N 6NC1-UP; R6J1-UP; 08Z91662-99999
PART OF 116-7568 ENGINE AR
i00522148 SEBP2437
1288806 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-3769 Y [1] PUMP GP-FUEL INJECTION  
2. 7L-8056 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-3088 [1] SHAFT AS-THROTTLE  
7. 2D-6392 [1] SEAL-O-RING  
8. 8N-6680 [1] SCREEN AS  
9. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
10. 8N-7276 Y [1] TORQUE CONTROL GP  
11. 2W-2410 Y [1] GOVERNOR GP  
12. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
13. 8N-5784 [1] DEFLECTOR-PULSE  
14. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
15. 8L-5832 [1] NUT-HEX (10-32-THD)  
16. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
17. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
18. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 4W-5735 [1] LEVER AS-PIVOT  
21. 115-1249 [1] SETSCREW-SOCKET  
22. 8L-5832 [1] NUT-HEX (10-32-THD)  
23. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
24. 033-5879 [1] SEAL-O-RING  
25. 8J-8343 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 150-3726 [1] GASKET  
28. 3J-1907 [1] SEAL-O-RING  
29. 8M-8515 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24370159
 

127-2308: SEPARATOR GP-WATER

127-2308 SEPARATOR GP-WATER
S/N 6DR1-UP
PART OF 139-9323 LINES GP-FUEL
FOR USE WITH APPLICATIONS THAT REQUIRE A PRIMARY 150 MICRON SERVICEABLE FUEL FILTER, AND A WATER SEPERATOR THAT HAS A PLASTIC BOWL WITH A DRAIN
AN ATTACHMENT
i00123799 SEBP2437
1272308 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-8460 [2] PLUG (1/2-20-THD)  
2. 117-4089 [1] ELEMENT-WATER SEPARATOR (WATER SEPARATOR)  
3. 118-1461 [1] BASE AS  
4. 118-8118 [1] RING-RETAINING  
5. 118-8119 [1] NUT  
6. 5P-7814 [2] SEAL-O-RING  
7. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)(WATER SEPARATOR)  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)(SEPARATOR)  
    (INCLUDES PLUGS, SEALS, RETAINING RING, & CAPS)
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 330B L :

PUMP GP-FUEL INJECTION
108-1548 PUMP GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
PROTECTION GP-FUEL SYSTEM
128-7984 PROTECTION GP-FUEL SYSTEM
LINES GP-FUEL INJECTION
4P-9331 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
133-8998 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
133-8997 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
133-8989 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
137-6302 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
6I-1003 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
108-1545 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
128-8806 PUMP GP-GOV & FUEL INJ

Truck sale:

Caterpillar 330BL, Construction
On Request 
Caterpillar 330BL, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar 330BL, Construction
21,751 
Caterpillar 330BL, Construction
- Petroleum Engines
FINNING CANADA
Canada
Caterpillar 330BL, Construction
44,000 
Caterpillar 330BL, Construction
- Crawler Excavators
QUINN COMPANY
Caterpillar 330BL, Construction
45,000 
Caterpillar 330BL, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
Caterpillar 330BL, Construction
43,000 
Caterpillar 330BL, Construction
- Crawler Excavators
H.O. PENN MACHINERY CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.