ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP24390520
145-7028: SENSOR GP-TEMPERATURE
145-7028 SENSOR GP-TEMPERATURE -HYDRAULIC OIL
S/N 7XM1-UP
2 PIN PASSIVE
PART OF 350-6773 CONVERSION GP-ELECTRICAL, 454-5408 KIT-CONVERSION, 220-6384 WIRING GP-ENGINE
S/N 7XM1-UP
2 PIN PASSIVE
PART OF 350-6773 CONVERSION GP-ELECTRICAL, 454-5408 KIT-CONVERSION, 220-6384 WIRING GP-ENGINE
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
#SEBP24390521
234-5012: SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N TXG1-UP; LHX1-UP
PART OF 354-0041 SENSOR GP-ENGINE
S/N TXG1-UP; LHX1-UP
PART OF 354-0041 SENSOR GP-ENGINE
For full view, you need register
#SEBP24390522
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TXG1-UP; LHX1-UP
PART OF 350-6783 LINES GP-FUEL, 354-0041 SENSOR GP-ENGINE
S/N TXG1-UP; LHX1-UP
PART OF 350-6783 LINES GP-FUEL, 354-0041 SENSOR GP-ENGINE
For full view, you need register
#SEBP24390523
116-2095: STARTING AID GP-ETHER
116-2095 STARTING AID GP-ETHER
S/N 7XM1-UP
PART OF 103-0128 CHASSIS AR
ALSO AN ATTACHMENT
S/N 7XM1-UP
PART OF 103-0128 CHASSIS AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-4365 | [1] | VALVE AS-ETHER START (24-VOLT) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-9801 | [1] | GASKET | ||
| 2. | 116-2096 | [1] | TUBE | |
| 3. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 4. | 9W-4216 | [2] | SPACER (9X18X7-MM THK) | |
| 5. | 5K-0906 | [2] | BOLT (5/16-18X0.625-IN) | |
| 6. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 6V-5782 | [2] | BOLT (5/16-18X1.125-IN) | |
| 8. | 116-2100 | [1] | BRACKET AS | |
| 4K-9097 | [2] | NUT-WELD (5/16-18-THD) | ||
| 9. | 6N-7672 | [1] | ATOMIZER-ETHER | |
| 10. | 6V-2686 | [2] | CLIP | |
| 11. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 12. | 5P-6315 | [1] | ELBOW-FLARELESS | |
| 5P-6313 | [1] | NUT (5/16-24-THD) | ||
| 5P-6314 | [1] | SLEEVE | ||
| 13. | 6K-6967 B | [1] | ADAPTER-PIPE | |
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP24390524
209-8389: STARTING AID GP-ETHER
209-8389 STARTING AID GP-ETHER
S/N 7XM1-UP
PART OF 350-6780 ELECTRICAL AR
Type 1
S/N 7XM1-UP
PART OF 350-6780 ELECTRICAL AR
Type 1
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6313 | [1] | NUT (5/16-24-THD) | |
| 2. | 5P-6314 | [1] | SLEEVE | |
| 3. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 4. | 127-7443 | [1] | ATOMIZER AS (ETHER) | |
| 5. | 230-1434 | [1] | FITTING AS | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 6. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 7. | 4M-5317 | [1] | BUSHING-REDUCER | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 10. | 174-9169 E | TUBE (12-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390525
209-8389: STARTING AID GP-ETHER
209-8389 STARTING AID GP-ETHER
S/N 7XM1-UP
PART OF 350-6780 ELECTRICAL AR
Type 2
S/N 7XM1-UP
PART OF 350-6780 ELECTRICAL AR
Type 2
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 2. | 127-7443 | [1] | ATOMIZER AS (ETHER) | |
| 3. | 230-1434 | [1] | FITTING AS | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 4. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 5. | 4M-5317 | [1] | BUSHING-REDUCER | |
| 6. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 8. | 174-9169 CE | TUBE (12-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390526
209-8423: STARTING MOTOR GP-ELECTRIC
209-8423 STARTING MOTOR GP-ELECTRIC
S/N 7XM1-UP
PART OF 350-6773 CONVERSION GP-ELECTRICAL
Type 1
S/N 7XM1-UP
PART OF 350-6773 CONVERSION GP-ELECTRICAL
Type 1
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-1059 | [1] | GASKET | |
| 2. | 185-6393 | [1] | CABLE AS-STARTING MOTOR | |
| 5P-0746 E | CABLE (0-GA, BLACK)(30-CM) | |||
| 1M-4986 | [1] | TERMINAL-RING (0-GA, 1/2-IN SCREW) | ||
| 030-1707 | [1] | TERMINAL-RING (0-GA, 3/8-IN SCREW) | ||
| 3. | 237-1962 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390527
209-8423: STARTING MOTOR GP-ELECTRIC
209-8423 STARTING MOTOR GP-ELECTRIC
S/N 7XM1-UP
PART OF 350-6773 CONVERSION GP-ELECTRICAL
Type 2
S/N 7XM1-UP
PART OF 350-6773 CONVERSION GP-ELECTRICAL
Type 2
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 185-6393 | [1] | CABLE AS-STARTING MOTOR | |
| 5P-0746 E | CABLE (0-GA, BLACK)(30-CM) | |||
| 1M-4986 | [1] | TERMINAL-RING (0-GA, 1/2-IN SCREW) | ||
| 030-1707 | [1] | TERMINAL-RING (0-GA, 3/8-IN SCREW) | ||
| 3. | 338-3454 CY | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390528
237-1962: STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
S/N 7XM1-UP
24-VOLT
PART OF 209-8423 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
S/N 7XM1-UP
24-VOLT
PART OF 209-8423 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 8A. | 6T-0371 | [1] | INSULATOR | |
| 8B. | 5P-6298 | [12] | SCREW-MACHINE (10-32X0.5-IN) | |
| 9F-5599 | [12] | LOCKWASHER | ||
| 8C. | 7F-3525 | [6] | WASHER-SPECIAL (0.207X0.39X0.09-IN THK) | |
| 8D. | 6T-0372 | [1] | PLATE | |
| 8E. | 3T-4709 | [3] | PLATE | |
| 8F. | 2L-6679 | [3] | PLATE-INSULATOR | |
| 8G. | 3T-4710 | [3] | PLATE | |
| 8H. | 6T-0363 | [6] | HOLDER AS-BRUSH (STARTING MOTOR) | |
| (EACH INCLUDES) | ||||
| 8J. | 3T-9494 | [1] | SPRING | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS (STARTING MOTOR) | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 3T-3434 | [6] | PLUG | |
| 14. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 15. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 16. | 036-9821 | [1] | WASHER | |
| 17. | 4M-1828 | [1] | RETAINER-SPRING | |
| 18. | 306-3998 | [1] | BOOT-RUBBER | |
| 19. | 9M-7609 | [1] | SPRING (SHIFT LEVER) | |
| 20. | 4M-1827 | [1] | RETAINER-SPRING | |
| 21. | 8C-3089 | [1] | SEAL-O-RING | |
| 22. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 23. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 24. | 7L-2894 | [4] | GASKET | |
| 25. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 26. | 4M-1854 | [1] | SHAFT-LEVER | |
| 27. | 1H-1023 | [1] | SEAL-O-RING | |
| 28. | 2D-6392 | [1] | SEAL-O-RING | |
| 29. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 30. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 31. | 2H-3429 | [2] | RING-RETAINING | |
| 32. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 33. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 6N-3279 | [1] | INSULATOR | |
| 35. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 36. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 37. | 1H-2629 | [3] | STRIP-INSULATION | |
| 38. | 7M-0324 | [1] | COIL AS-FIELD | |
| 39. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 40. | 7F-3488 | [6] | SHOE-POLE | |
| 41. | 7M-8651 | [1] | ARMATURE AS | |
| 42. | 7M-0325 | [1] | INSULATOR | |
| 43. | 3T-9524 | [6] | BRUSH AS | |
| 44. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 45. | 125-6537 | [1] | INSULATOR | |
| 46. | 3R-8801 | [1] | CLAMP | |
| 47. | 8F-1434 | [2] | LOCKWASHER | |
| 48. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 49. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 50. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 51. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 52. | 3T-9494 | [6] | SPRING (STARTING MOTOR) | |
| 53. | 3E-7771 | [1] | HOUSING AS (STARTING MOTOR) | |
| 54. | 9G-4101 | [1] | BUSHING-END | |
| 55. | 3T-3424 | [3] | PLUG-FELT | |
| 56. | 3T-3423 | [3] | CUP | |
| 57. | 1M-9968 | [1] | BUSHING | |
| 58. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 59. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 60. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 61. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 62. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 63. | 7T-9123 | [1] | GASKET-PLATE | |
| 64. | 318-2082 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| 65. | 125-6536 | [1] | TERMINAL AS | |
#SEBP24390529
338-3454: STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
S/N 7XM1-UP
24-VOLT
PART OF 454-5408 KIT-CONVERSION, 209-8423 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@237-1962@@@@@
S/N 7XM1-UP
24-VOLT
PART OF 454-5408 KIT-CONVERSION, 209-8423 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@237-1962@@@@@
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 14. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 15. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 16. | 8C-3089 | [1] | SEAL-O-RING | |
| 17. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 18. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 19. | 7L-2894 | [4] | GASKET | |
| 20. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 21. | 4M-1854 | [1] | SHAFT-LEVER | |
| 22. | 1H-1023 | [1] | SEAL-O-RING | |
| 23. | 2D-6392 | [1] | SEAL-O-RING | |
| 24. | 494-6475 | [1] | HOUSING AS-DRIVE | |
| 25. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 26. | 2H-3429 | [1] | RING-RETAINING | |
| 27. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 28. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 6N-3279 | [1] | INSULATOR | |
| 30. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 31. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 32. | 1H-2629 | [3] | STRIP-INSULATION | |
| 33. | 7M-0324 | [1] | COIL AS-FIELD | |
| 34. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 35. | 7F-3488 | [6] | SHOE-POLE | |
| 36. | 7M-8651 | [1] | ARMATURE AS | |
| 37. | 7M-0325 | [1] | INSULATOR | |
| 38. | 3T-9524 | [6] | BRUSH AS | |
| 39. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 40. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 40A. | 3R-8801 | [1] | CLAMP | |
| 42. | 8F-1434 | [2] | LOCKWASHER | |
| 43. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 44. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 45. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 46. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 47. | 3T-9494 | [6] | SPRING | |
| 48. | 3E-7771 | [1] | HOUSING AS (STARTING MOTOR) | |
| 49. | 9G-4101 | [1] | BUSHING-END | |
| 50. | 3T-3424 | [3] | PLUG-FELT | |
| 51. | 3T-3423 | [3] | CUP | |
| 52. | 1M-9968 | [1] | BUSHING | |
| 53. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 54. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 55. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 56. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
