AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-6647 KIT-OVERPACK S/N 7XM1-UP FOR USE WITH ANY RIPPER AN ATTACHMENT D8R TRACK-TYPE TRACTOR


IMPLEMENTS
KITS
BULLDOZER GP
LINKAGE GP

TRACK-TYPE TRACTOR D8R TRACK-TYPE TRACTOR 7XM
 D8R Track-Type Tractor 7XM00001-UP (MACHINE) POWERED BY 3406 Engine SEBP2439 D8R 7XM   (1995)

IMPLEMENTS

KITS
111-0623 KIT-OVERPACK
112-6647 KIT-OVERPACK
166-7233 KIT-OVERPACK
 

#SEBP24391030
 

112-6647: KIT-OVERPACK

112-6647 KIT-OVERPACK
S/N 7XM1-UP
FOR USE WITH ANY RIPPER
AN ATTACHMENT
i00492579 SEBP2439
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-6454 [11] BOLT (3/8-16X1-IN)  
  4L-6459 [1] BOLT (3/8-16X2.5-IN)  
  5S-7382 [16] BOLT (3/8-16X1.375-IN)  
  7X-0345 [4] BOLT (5/8-11X1.75-IN)  
  7X-0365 [12] BOLT (3/4-10X1.5-IN)  
  7X-0366 [6] BOLT (3/4-10X2-IN)  
  7X-0377 [2] BOLT (3/4-10X6.5-IN)  
  8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  8T-8924 [4] BOLT (3/4-10X2.5-IN)  
  8T-9393 [2] BOLT (5/8-11X1.5-IN)  
  8T-9398 [2] BOLT (3/4-10X1.75-IN)  
  6K-0138 [4] BOLT-LOCKING (5/8-11X1.25-IN)  
  3G-8054 [3] CLIP (TAB)  
  3G-8057 [3] CLIP (SLOT)  
  5P-7462 [2] CLIP (SLOT)  
  5P-7463 [2] CLIP (TAB)  
  6V-8636 [2] CONNECTOR  
  6F-4161 [2] DOWEL  
  6V-8723 [2] ELBOW  
  1P-4576 [4] FLANGE-HALF  
  1P-4577 [9] FLANGE-HALF  
  6V-0683 [2] GROMMET  
  6V-0974 [3] GROMMET  
  1K-6870 [2] LOCKNUT (3/4-10-THD)  
  6V-8182 [4] NUT (3/4-10-THD)  
  7H-7539 [12] NUT-FULL (1-1/4-12-THD)  
  7T-4501 [1] PIN  
  7T-4502 [1] PIN  
  8E-8914 [2] PIN  
  125-9215 [1] PIN  
  4T-2479 [2] PIN AS  
    (EACH INCLUDES)
  [1] ADAPTER  
  7T-7305 [6] PLATE  
  8E-4743 [3] RETAINER  
  6K-3630 [1] RING  
  7J-4169 [2] RING-SNAP  
  3E-6756 [12] SEAL-LIP TYPE  
  3E-6757 [6] SEAL-LIP TYPE  
  3J-1907 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4J-0520 [6] SEAL-O-RING  
  4J-5267 [8] SEAL-O-RING  
  6V-8397 [4] SEAL-O-RING  
  7K-1181 [3] STRAP-CABLE  
  7T-5790 [12] STUD-TAPERLOCK  
  4T-3522 [12] WASHER (95X170X3-MM THK)  
  7X-0515 [8] WASHER-HARD (17X35X5-MM THK)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
  8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
  7X-0533 [12] WASHER-HARD (34X55X6-MM THK)  
  7X-0537 [1] WASHER-HARD (40.5X67X6-MM THK)  
  7X-0582 [12] WASHER-HARD (20X44.5X6-MM THK)  
  7X-0772 [8] WASHER-HARD (10.2X25.5X2.5-MM THK)  
  8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
 

#SEBP24391031
 

166-7233: KIT-OVERPACK

166-7233 KIT-OVERPACK -RIPPER
S/N 7XM1-UP
AN ATTACHMENT
i01038801 SEBP2439
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7X-0428 [12] BOLT (1-1/4-7X4-IN)  
  7X-2562 M [2] BOLT (M20X2.5X45-MM)  
  7X-2563 M [4] BOLT (M20X2.5X60-MM)  
  7X-2568 M [2] BOLT (M20X2.5X180-MM)  
  8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  8T-4195 M [6] BOLT (M10X1.5X30-MM)  
  8T-4196 M [15] BOLT (M10X1.5X35-MM)  
  8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  8T-6430 M [6] BOLT (M20X2.5X50-MM)  
  8T-7338 M [6] BOLT (M16X2X45-MM)  
  8C-8992 M [4] BOLT-LOCKING (M12X1.75X30-MM)  
  9M-2904 [9] CLAMP-HOSE  
  3G-8054 [3] CLIP (TAB)  
  3G-8057 [3] CLIP (SLOT)  
  6V-9873 [2] CONNECTOR  
  6F-4161 [2] DOWEL  
  6V-8625 [1] ELBOW  
  6V-9002 [1] ELBOW  
  1P-4576 [4] FLANGE-HALF  
  1P-4577 [9] FLANGE-HALF  
  3G-8047 [3] GROMMET  
  130-9191 [6] GROMMET  
  130-6366 [2] LINK  
  6V-7688 M [2] LOCKNUT (M20X2.5-THD)  
  8T-4131 M [4] NUT (M20X2.5-THD)  
  6J-6680 [1] PIN  
  6J-6703 [1] PIN  
  7T-4501 [1] PIN  
  7T-4502 [1] PIN  
  135-5109 [1] PIN  
  135-5113 [2] PIN  
  135-5114 [1] PIN  
  162-0390 [2] PIN  
  4T-2479 [2] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
  6Y-3394 [3] PIN  
  7T-7305 [6] PLATE  
  6V-9313 [2] PLUG  
  8E-4743 [3] RETAINER  
  6K-3630 [1] RING  
  7J-4169 [2] RING-SNAP  
  3E-6756 [12] SEAL-LIP TYPE  
  3E-6757 [6] SEAL-LIP TYPE  
  3J-1907 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4J-0520 [11] SEAL-O-RING  
  4J-5267 [2] SEAL-O-RING  
  6V-8398 [4] SEAL-O-RING  
  130-1977 [9] SHIELD  
  139-2456 [2] SHIELD  
  139-2455 [2] SHIELD  
  7K-1181 [3] STRAP-CABLE  
  4T-3522 [12] WASHER (95X170X3-MM THK)  
  8T-5439 [9] WASHER-HARD (21.5X45X6-MM THK)  
  9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
  7X-0533 [12] WASHER-HARD (34X55X6-MM THK)  
  7X-0537 [1] WASHER-HARD (40.5X67X6-MM THK)  
  7X-3391 [4] WASHER-HARD (13.5X32X6-MM THK)  
  8T-4123 [2] WASHER (22X35X3.5-MM THK)  
  M   METRIC PART
 

#SEBP24391032
 

158-6398: LINK GP-STABILIZER

158-6398 LINK GP-STABILIZER
S/N 7XM1-UP; 2TP1-UP; 2WP1-UP
PART OF 118-3173, 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01049044 SEBP2439
1586398 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 202-4981 [1] LINK AS  
3. 6I-8676 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
6. 160-6307 [2] CAP-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24391033
 

158-6398: LINK GP-STABILIZER

158-6398 LINK GP-STABILIZER
S/N 7XM1-UP
PART OF 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02022688 SEBP2439
1586398 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 243-3371 C [1] LINK AS  
3A. 8P-9770 [1] PLATE  
3B. 6I-8676 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24391034
 

239-3340: LINK GP-STABILIZER

239-3340 LINK GP-STABILIZER
S/N DZA1-UP; DZB1-UP; 7XM1-UP
PART OF 385-5575 INSTALLATION AR-BULLDOZER, 237-4368 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01960901 SEBP2439
2393340 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 239-3341 [1] LINK AS  
  6I-8676 [2] BEARING  
  239-9275 [3] BLOCK  
  239-9670 [3] BLOCK  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24391035
 

6I-8677: LINK GP-STABILIZER

6I-8677 LINK GP-STABILIZER
S/N 2TP1-UP; 2WP1-UP
PART OF 118-3173 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00403321 SEBP2439
6I8677 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6307 [2] CAP-BEARING  
2. 7X-2578 M [8] BOLT (M24X3X200-MM)  
  8T-4001 M [8] NUT (M24X3-THD)  
3. 6I-8675 B [52] SHIM (0.6-MM THK)  
4. 6I-8679 [1] LINK AS  
  8P-9770 [1] PLATE  
  6I-8676 [2] BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24391036
 

6Y-3522: LINKAGE GP-IMPLEMENT

6Y-3522 LINKAGE GP-IMPLEMENT
S/N 7XM1-UP
DOZER
PART OF 109-7183 CONTROL AR-HYDRAULIC
i00715532 SEBP2439
6Y3522 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6894 [1] HANDLE  
2. 6B-6684 [1] NUT-FULL (1/2-20-THD)  
3. 3P-3676 [1] CLAMP  
4. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
  6V-8801 [1] NUT (3/8-16-THD)  
5. 6Y-4823 [1] ROD  
6. 174-5732 [1] SHAFT  
7. 8E-5962 [1] PLATE  
8. 174-5733 [1] SHAFT  
  1H-1200 [1] PIN-SPRING  
9. 6Y-4855 [1] ROD  
10. 8E-7364 [1] BOOT  
11. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
12. 5J-5315 [2] ROD END  
13. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
14. 4L-6454 [4] BOLT (3/8-16X1-IN)  
15. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 3T-9345 [1] BRACKET  
17. 4J-3044 [4] BEARING AS-NEEDLE  
  8T-0741 [8] SEAL-LIP TYPE  
18. 1M-1341 [2] END-YOKE ROD  
  8T-8932 [2] PIN AS-SPRING  
19. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
20. 6V-1193 [4] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
21. 3T-7376 [1] CHANNEL AS  
  9F-2978 [4] NUT-WELD (3/8-16-THD)  
  7T-1099 [1] LINK  
22. 127-6362 [1] LEVER AS  
23. 169-1644 [2] BOOT  
24. 127-5696 [1] PLATE AS  
  [1] RIVET  
  109-0628 [1] HINGE  
  122-6133 [2] WASHER (CURVED SPRING)  
25. 9M-5617 [1] GROMMET  
26. 9D-9736 [1] BUMPER  
27. 102-2913 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
 

#SEBP24391037
 

6Y-3528: LINKAGE GP-IMPLEMENT

6Y-3528 LINKAGE GP-IMPLEMENT
S/N 7XM1-UP
RIPPER
PART OF 108-1011 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
i00390933 SEBP2439
6Y3528 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-4474 [1] KNOB AS  
2. 9S-1354 C [3] NUT (5/8-18-THD)  
3. 6Y-4822 [1] ROD  
4. 5J-5315 [1] ROD END  
5. 169-1644 C [1] BOOT  
6. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
7. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
8. 9N-4475 [1] KNOB AS  
  9R-1767 [1] BOOT  
9. 9R-2644 [1] BUSHING-TERMINAL  
10. 3E-0306 [1] SWITCH AS (RIPPER SHANK ADJ)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
11. 1M-1341 [1] END-YOKE ROD  
12. 8T-8932 [1] PIN AS-SPRING  
13. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
14. 123-0111 C [1] LEVER AS  
15. 4J-3044 [2] BEARING AS-NEEDLE  
16. 8T-0741 [4] SEAL-LIP TYPE  
17. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 3T-9361 [1] BRACKET AS  
20. 3T-9351 [1] SHAFT  
21. 8T-2637 [1] PIN-SPRING  
22. 8E-5962 [1] PLATE  
23. 8E-7364 [1] BOOT  
24. 3S-2093 [1] STRAP-CABLE  
25. 3T-3048 [3] CLIP AS  
26. 7K-1181 [3] STRAP-CABLE  
27. 8E-4863 [1] WIRE AS  
28. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
29. 9M-5617 C [1] GROMMET  
30. 123-5802 C [1] PLATE AS  
31. 123-5803 C [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24391038
 

6Y-3528: LINKAGE GP-IMPLEMENT

6Y-3528 LINKAGE GP-IMPLEMENT
S/N 7XM1-UP
RIPPER
PART OF 108-1011 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
i01844780 SEBP2439
6Y3528 LINKAGE GP-IMPLEMENT Parts scheme 6Y3528 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-4474 [1] KNOB AS (RIPPER CONTROL)  
  110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
2. 9S-1354 [3] NUT (5/8-18-THD)  
3. 6Y-4822 [1] ROD  
4. 5J-5315 [1] ROD END  
5. 169-1644 [1] BOOT  
6. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
7. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
8. 9N-4475 [1] KNOB AS  
  9R-1767 [1] BOOT  
9. 9R-2644 [1] BUSHING-TERMINAL  
10. 3E-0306 [1] SWITCH AS (RIPPER SHANK IN, OUT)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
11. 1M-1341 [1] END-YOKE ROD  
12. 8T-8932 [1] PIN AS-SPRING  
13. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
14. 123-0111 [1] LEVER AS  
15. 4J-3044 [2] BEARING AS-NEEDLE  
16. 8T-0741 [4] SEAL-LIP TYPE  
17. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 3T-9361 [1] BRACKET AS  
20. 3T-9351 [1] SHAFT  
21. 8T-2637 [1] PIN-SPRING  
22. 8E-5962 [1] PLATE  
23. 8E-7364 [1] BOOT  
24. 102-2914 [1] FILM-INSTRUCTION (RIPPER CONTROL)  
25. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
26. 3T-3048 C [2] CLIP AS  
27. 7K-1181 [3] STRAP-CABLE  
28. 225-8531 C [1] HARNESS AS-SOLENOID (DIVERTER VALVE)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
29. 3S-2093 [1] STRAP-CABLE  
30. 123-5802 [1] PLATE AS  
31. 123-5803 [1] PLATE  
32. 9M-5617 [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24391039
 

6Y-7862: LINKAGE GP-IMPLEMENT

6Y-7862 LINKAGE GP-IMPLEMENT
S/N 7XM1-UP
WINCH
PART OF 6Y-7866 INSTALLATION AR-WINCH
AN ATTACHMENT
i00395211 SEBP2439
6Y7862 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-7364 [1] BOOT  
2. 1S-3368 [1] ROD-CONTROL  
3. 5J-5315 [3] ROD END  
  2L-6267 [3] LOCKNUT (3/8-24-THD)  
  6V-3294 [3] BOOT-ROD END  
4. 6V-8183 [9] NUT-FULL (3/8-24-THD)  
5. 7X-0288 [1] BOLT (3/8-16X1.625-IN)  
  6V-8801 [1] NUT (3/8-16-THD)  
6. 106-1794 [1] BRACKET  
7. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
8. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
9. 6T-4329 [1] LEVER  
10. 1B-8704 [2] KEY-WOODRUFF  
11. 8T-4835 [1] BOLT (1/2-13X2-IN)  
  6V-8188 [1] NUT (1/2-13-THD)  
12. 6Y-9638 [1] PLATE AS  
13. 2A-1736 [1] HANDLE  
14. 6I-8042 [1] LEVER AS  
15. 101-2969 [1] COVER AS  
  9F-2978 [7] NUT-WELD (3/8-16-THD)  
16. 7K-1181 [1] STRAP-CABLE  
17. 8T-8932 [1] PIN AS-SPRING  
18. 8E-9313 [1] SHAFT AS  
19. 4J-3044 [8] BEARING AS-NEEDLE  
20. 8T-0741 [12] SEAL-LIP TYPE  
21. 6Y-9633 [1] LEVER  
22. 6Y-9634 [1] LEVER  
23. 6Y-9635 [2] ROD  
24. 4D-4064 [4] ROD END (3/8-24-THD)  
  6V-2867 [4] BOOT-ROD END  
  6V-2866 [8] SPACER  
25. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
26. 3T-9351 [1] SHAFT  
27. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
28. 8T-2637 [2] PIN-SPRING  
29. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
30. 8E-3130 [1] LEVER  
31. 3R-4761 [1] ROD END  
32. 6Y-4821 [1] SHAFT  
33. 1A-2812 [1] WASHER (0.06-MM THK)  
34. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
35. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 7T-9379 [1] LEVER  
37. 1K-0502 B [4] WASHER (16.3X25.4X1.2-MM THK)  
38. 1M-1341 [1] END-YOKE ROD  
39. 3E-4374 [4] STUD (3/8-24X3.15-IN)  
40. 101-2970 [1] PLATE  
41. 106-1797 [1] ROD  
42. 4K-5824 [1] BOSS  
43. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
44. 9S-1354 [2] NUT (5/8-18-THD)  
45. 123-5803 [1] PLATE  
46. 9M-5617 [1] GROMMET  
47. 128-9731 [1] PLATE AS  
  B   USE AS REQUIRED
 

Information:

Caterpillar Parts SIS Catalog D8R :

111-0623 KIT-OVERPACK
INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER
C-FRAME GP
8E-6191 C-FRAME GP
C-FRAME GP
159-8142 C-FRAME GP
BULLDOZER AR-UNIVERSAL
245-3567 BULLDOZER AR-UNIVERSAL
BULLDOZER AR-UNIVERSAL
245-3566 BULLDOZER AR-UNIVERSAL
119-0486 BULLDOZER AR-UNIVERSAL
111-8279 BULLDOZER AR-UNIVERSAL
166-7233 KIT-OVERPACK
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
239-3340 LINK GP-STABILIZER
LINK GP-STABILIZER
6I-8677 LINK GP-STABILIZER
LINKAGE GP-IMPLEMENT
6Y-3522 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT

Truck sale:

 
 
Caterpillar D8R
- Crawler dozers
MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D8R, Crawler dozers, Construction
428,253 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
WESTRAC
Caterpillar SU BLD D8R, blades, Construction
 
Caterpillar SU BLD D8R, blades, Construction
- blades
HOLT CAT
Caterpillar D8R, Crawler dozers, Construction
 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
M. EZZAT JALLAD & FILS
 
384,598 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.