AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

125-0131 FRAME GP S/N 2ZJ1965-UP PART OF 113-7260 CHASSIS AR 65C CHALLENGER


FRAME AND BODY
FRAME GP
GUARD GP
COUNTERWEIGHT GP
STEP GP
UNDERCARRIAGE
AXLE GP
TENSIONER GP-TRACK
CYLINDER GP

CHALLENGER 65C CHALLENGER 2ZJ
 Challenger 65D Agricultural Tractor 2ZJ01965-UP (MACHINE) POWERED BY 3306 Engine SEBP2440 65C 2ZJ   (1992)

FRAME AND BODY

FRAME GP
FRAME GP
125-0131 FRAME GP
 

#SEBP24400240
 

125-0131: FRAME GP

125-0131 FRAME GP
S/N 2ZJ1965-UP
PART OF 113-7260 CHASSIS AR
i00520050 SEBP2440
1250131 FRAME GP Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7382 [12] BOLT (3/8-16X1.375-IN)  
2. 4D-4431 [2] BEARING-ALIGNING  
3. 6V-6640 B SEALANT  
4. 4D-8148 [2] DOWEL  
5. 8T-6332 [2] PLUG-MAGNETIC (FINAL DRIVE)  
6. 2M-9780 [2] SEAL-O-RING  
7. 3T-7409 [2] BRACKET  
8. 9X-8874 [6] BOLT (1/2-13X3-IN)  
9. 4E-0041 [1] GAUGE (SIGHT GLASS)  
10. 3D-2824 [1] SEAL-O-RING  
11. 9S-1366 [5] BOLT (1/2-13X2.5-IN)  
12. 5P-8245 [27] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 0S-1573 [8] BOLT (1/2-13X4-IN)  
14. 8V-9708 [8] SPACER (14.3X25.4X35-MM THK)  
15. 7X-0592 [12] WASHER-HARD (10.2X32X5-MM THK)  
16. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
17. 8V-9882 [2] STRIP  
18. 5P-8167 [10] BOLT (3/8-16X0.625-IN)  
19. 3W-7804 [1] BRACKET  
20. 6G-7406 [2] STRIP  
21. 7I-3989 [1] GUARD  
22. 9U-2683 [2] SHIELD  
23. 9U-2682 [1] GUARD AS (RH)  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
24. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
25. 9U-2680 [1] GUARD AS (LH)  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
26. 2M-7077 [4] SPACER (0.406X0.62X0.37-IN THK)  
27. 9D-3769 [4] GROMMET  
28. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 103-1000 [1] FRAME AS  
  3J-5169 [2] NUT-WELD (5/8-11-THD)  
  1F-0750 [6] NUT-WELD (3/8-16-THD)  
  6V-3231 [15] BOSS-WELD  
30. 8R-1386 [4] BLOCK  
31. 7G-3945 [4] PLATE  
32. 9K-3050 [7] STUD-WELD  
33. 7T-1099 [23] LINK  
34. 8G-0453 [2] LUG (3/8-16-THD)  
35. 6S-9470 [2] PLATE  
36. 3L-5549 [5] STUD-WELD (3/8-16X0.625-IN)  
37. 6V-3232 [21] BOSS-WELD  
38. 6V-3234 [10] BOSS-WELD (3/8-16X2.55-IN)  
39. 6V-3302 [6] BOSS-WELD (3/8-16X3.73-IN)  
40. 103-1001 [1] RAIL AS (LH)  
41. 103-1002 [1] RAIL AS (RH)  
42. [1] COVER  
43. [1] COVER  
44. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
45. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
46. 5P-6864 [1] CLIP (SLOT)  
47. 5P-6863 [1] CLIP (TAB)  
48. 3W-7803 [1] TOOL BOX  
49. 5C-6266 [2] BOLT (5/8-11X1-IN)  
  B   USE AS REQUIRED
 

#SEBP24400241
 

133-6298: GUARD GP-REAR

133-6298 GUARD GP-REAR
S/N 2ZJ2093-UP
PART OF 124-4801 CONFIGURATION AR-WITHOUT HITCH, 124-6638 HITCH AR
i00503389 SEBP2440
1336298 GUARD GP-REAR Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-3062 [6] BOLT (3/8-16X0.75 IN)  
2. 7X-0592 [6] WASHER-HARD (10.2X32X5MM THK)  
3. 6S-8224 [4] PLUG-PROTECTION  
4. 109-7408 [1] GUARD  
 

#SEBP24400242
 

125-4271: HOOD & GUARD GP

125-4271 HOOD & GUARD GP
S/N 2ZJ1965-UP
PART OF 113-7254 CHASSIS AR
i00521865 SEBP2440
1254271 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-8472 BE SEAL  
2. 4E-2868 [1] SUPPORT-PANEL (RH)  
3. 7X-0579 [12] WASHER-HARD (8.8X25.5X2-MM THK)  
4. 6V-8189 [8] NUT (5/16-18-THD)  
5. 3W-7412 [6] BUMPER-CONICAL  
6. 4E-2699 [1] PANEL AS (RH)  
7. [2] BRACKET  
8. 8P-0612 [1] BRACKET  
9. 5R-5597 [1] BRACKET  
10. 9X-8699 BD SEAL  
11. 126-8507 [2] LATCH AS  
12. 4E-3063 [2] BAFFLE  
13. 8T-4896 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9B-7237 [16] BOLT (3/8-16X1.25-IN)  
15. 9M-3835 [6] LATCH-RUBBER  
16. 2M-5795 [6] PIN-CLEVIS  
17. 3B-4607 [6] PIN-COTTER  
18. 5T-3710 [2] BRACKET  
19. 4L-6454 [14] BOLT (3/8-16X1-IN)  
20. 125-4270 [1] HOOD AS  
  4D-2303 [9] WASHER (0.27X0.81X0.062-IN THK)  
  6V-8957 [3] RIVET-POP (31.6MM GRIP LENGTH)  
  037-4426 [12] RETAINER  
  126-6871 [1] INSULATION  
  6D-6581 [24] RIVET-POP (9.53MM GRIP LENGTH)  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
21. 033-4843 [4] NUT (5/16-18-THD)  
22. 100-4036 [1] MARKER  
23. 8C-0566 B [6] WASHER (10.2X25.5X2.5-MM THK)  
24. 125-3518 E SEAL (103CM)  
25. 4E-2872 [1] RETAINER-GRILL  
26. 6V-8801 [2] NUT (3/8-16-THD)  
27. 4E-2700 [1] PANEL AS (LH)  
28. [2] BRACKET  
29. 8P-0612 [1] BRACKET  
30. 5R-5597 [1] BRACKET  
31. 4E-2869 [1] SUPPORT-PANEL (LH)  
32. 4E-3061 [2] SEAL  
33. 5P-1075 [14] WASHER-HARD (10.2X22.5X3-MM THK)  
34. 2K-4973 [12] LOCKNUT (3/8-16-THD)  
35. 4E-3062 [1] BAFFLE  
36. 4E-2865 [1] SUPPORT-HOOD (LH)  
37. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
38. 1P-7115 [2] GROMMET AS  
39. 4E-2864 [1] SUPPORT-HOOD (RH)  
40. 125-4272 [1] GRILL AS-FRONT  
41. 9X-6556 BD SEAL  
42. 126-8508 [2] CAM-LATCH  
43. 4E-2866 [1] SUPPORT-PANEL (RH)  
44. 4E-2867 [1] SUPPORT-PANEL (LH)  
45. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 9R-5616 [1] PLUG  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP24400243
 

122-0537: MOUNTING GP-COUNTERWEIGHT

122-0537 MOUNTING GP-COUNTERWEIGHT
S/N 2ZJ1965-UP
i00488193 SEBP2440
1220537 MOUNTING GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1111 [1] BRACKET AS (FRONT COUNTERWEIGHT)  
2. 7X-0366 [8] BOLT (3/4-10X2 IN)  
3. 8T-4994 [8] WASHER-HARD (20X36.5X5MM THK)  
 

#SEBP24400244
 

9U-1689: STEP GP

9U-1689 STEP GP
S/N 2ZJ1965-UP
PART OF 113-7260 CHASSIS AR
i00540466 SEBP2440
9U1689 STEP GP Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-0361 [1] WALKWAY  
2. 101-0357 [1] BRACKET  
3. 8T-9043 [3] BOLT (5/16-18X0.875-IN)  
  5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
4. 8T-4171 M [1] BOLT (M6X1X12-MM)  
5. 6V-7646 [3] WASHER-HARD (7.2X25X2-MM THK)  
6. 8Y-5726 [1] SOCKET-LATCH  
7. 3V-0613 [2] BUMPER  
8. 8C-4427 [1] PLUNGER  
9. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
10. 123-1008 C [1] STEP AS  
  4M-0200 [2] STUD-WELD (3/8-16X1.5-IN)  
11. 123-1005 C [1] HANDRAIL AS  
12. 123-1006 C [1] HANDRAIL AS  
13. 8T-4896 C [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 4H-3283 [1] BOLT (3/8-16X9.5-IN)  
15. 5P-2228 [4] BOLT (1/2-13X1-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 5S-7379 [8] BOLT (3/8-16X0.875-IN)  
  5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
17. 101-0363 [1] WALKWAY AS  
  9F-2978 [4] NUT-WELD (3/8-16-THD)  
18. 101-0362 [1] WALKWAY AS  
  9F-2978 [4] NUT-WELD (3/8-16-THD)  
  7T-1099 [4] LINK  
19. 8T-4226 C [16] WASHER-PLATED (10.5X45X3-MM THK)  
20. 6V-8801 C [8] NUT (3/8-16-THD)  
21. 6N-6984 C [8] MOUNT-RUBBER  
22. 5S-7383 C [8] BOLT (3/8-16X1.75-IN)  
23. 2K-4973 C [3] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24400245
 

100-4548: AXLE GP-FRONT

100-4548 AXLE GP-FRONT
S/N 2ZJ1965-2093
PART OF 113-7259 POWER TRAIN AR
i00460302 SEBP2440
1004548 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4639 [24] BOLT (1-8X4-IN)  
2. 128-2584 [2] PAD  
3. 110-6356 [2] SHIM-TAPERED (0.6-DEG)(7.39MM THK)  
4. 100-4550 [2] SPINDLE  
5. 5M-3062 [16] BOLT (3/8-16X0.75-IN)  
6. 4E-5875 [2] RING  
7. 4H-6507 [2] LOCKNUT  
8. 7X-0349 [12] BOLT (5/8-11X3-IN)  
  8T-6871 [12] BOLT (5/8-11X2.5-IN)  
9. 6V-1918 [2] LOCKWASHER-BEARING  
10. 107-7458 [2] WASHER  
11. 8R-0633 [8] SHIM (3-MM THK)  
12. 1J-4757 [4] CONE-BEARING  
13. 5P-8249 [12] WASHER-HARD (24X41.5X4-MM THK)  
14. 3K-0360 [2] SEAL-O-RING  
15. 7X-0583 [4] WASHER-HARD (17X45X6-MM THK)  
16. 9W-6671 [2] SEAL GP-DUO-CONE  
17. 4M-1552 [2] CONE-BEARING  
18. 8T-4122 [13] WASHER-HARD (17X32X3.5-MM THK)  
19. 123-8505 [1] AXLE-FRONT  
20. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 8R-0634 [2] BRACKET  
22. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
23. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 4H-9457 [1] WASHER (10-MM THK)(10MM THK)  
25. 8T-9393 [1] BOLT (5/8-11X1.5-IN)  
26. 8G-7946 [1] PLATE  
27. 125-0127 [1] PIN  
28. 1J-6472 [2] RING-RETAINING  
29. 8G-4189 [1] BEARING-SELF-ALIGNING  
30. 3B-8489 [1] FITTING-GREASE  
31. 8G-4190 [2] SEAL  
32. 103-2237 [2] HUB-IDLER WHEEL  
33. 1J-2860 [4] CUP-BEARING  
34. 9X-2230 [2] PLUG-DRAIN (MAGNETIC)  
35. 5P-8250 [24] WASHER (28X49X5-MM THK)  
36. 110-6354 [2] SHIM-TAPERED (0.4-DEG)(7.09MM THK)  
37. 1D-4629 [12] BOLT (7/8-9X3.5-IN)  
38. 104-5373 [2] CAP GP-HUB  
    (EACH INCLUDES)
39. 105-5125 [1] GASKET-HUB CAP  
40. 9U-4280 [1] PLUG  
41. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
42. 3F-5920 [2] CUP-BEARING  
43. 7X-0343 [4] BOLT (5/8-11X1.25-IN)  
 

#SEBP24400246
 

100-4548: AXLE GP-FRONT

100-4548 AXLE GP-FRONT
S/N 2ZJ2094-UP
PART OF 113-7259 POWER TRAIN AR
i00460303 SEBP2440
1004548 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4639 [24] BOLT (1-8X4-IN)  
2. 128-2584 [2] PAD  
3. 110-6356 B [2] SHIM-TAPERED (0.6-DEG)(7.39MM THK)  
4. 100-4550 [2] SPINDLE  
5. 5M-3062 [16] BOLT (3/8-16X0.75-IN)  
6. 4E-5875 [2] RING  
7. 4H-6507 [2] LOCKNUT  
8. 7X-0349 B [12] BOLT (5/8-11X3-IN)  
  8T-6871 B [12] BOLT (5/8-11X2.5-IN)  
9. 6V-1918 [2] LOCKWASHER-BEARING  
10. 107-7458 [2] WASHER  
11. 7X-0343 [4] BOLT (5/8-11X1.25-IN)  
12. 1J-4757 [4] CONE-BEARING  
13. 5P-8249 [12] WASHER-HARD (24X41.5X4-MM THK)  
14. 3K-0360 [2] SEAL-O-RING  
15. 7X-0583 [4] WASHER-HARD (17X45X6-MM THK)  
16. 9W-6671 [2] SEAL GP-DUO-CONE  
17. 4M-1552 [2] CONE-BEARING  
18. 8T-4122 [13] WASHER-HARD (17X32X3.5-MM THK)  
19. 123-8505 [1] AXLE-FRONT  
20. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 129-9451 C [2] BRACKET  
22. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
23. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 4H-9457 [1] WASHER (10-MM THK)(10MM THK)  
25. 8T-9393 [1] BOLT (5/8-11X1.5-IN)  
26. 8G-7946 [1] PLATE  
27. 125-0127 [1] PIN  
28. 1J-6472 [2] RING-RETAINING  
29. 8G-4189 [1] BEARING-SELF-ALIGNING  
30. 3B-8489 [1] FITTING-GREASE  
31. 8G-4190 [2] SEAL  
32. 103-2237 [2] HUB-IDLER WHEEL  
33. 1J-2860 [4] CUP-BEARING  
34. 9X-2230 [2] PLUG-DRAIN (MAGNETIC)  
35. 5P-8250 [24] WASHER (28X49X5-MM THK)  
36. 110-6354 B [2] SHIM-TAPERED (0.4-DEG)(7.09MM THK)  
37. 1D-4629 [12] BOLT (7/8-9X3.5-IN)  
38. 104-5373 [2] CAP GP-HUB  
    (EACH INCLUDES)
39. 105-5125 [1] GASKET-HUB CAP  
40. 9U-4280 [1] PLUG  
41. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
42. 3F-5920 [2] CUP-BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24400247
 

9U-1844: BELT TENSIONER GP

9U-1844 BELT TENSIONER GP
S/N 2ZJ1965-2521
PART OF 113-7259 POWER TRAIN AR
i00787554 SEBP2440
9U1844 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1428 Y [2] CYLINDER GP  
2. 8R-1693 [4] PIN AS  
3. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
  2S-7593 [4] WASHER-HARD (17X35X5-MM THK)  
  2V-1817 [4] SPACER (0.78X1.12X0.75-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24400248
 

9U-1844: BELT TENSIONER GP

9U-1844 BELT TENSIONER GP
S/N 2ZJ2522-UP
PART OF 113-7259 POWER TRAIN AR
i01014876 SEBP2440
9U1844 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-4382 Y [2] CYLINDER GP-BELT TENSIONER  
2. 8R-1693 [4] PIN AS  
3. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
4. 2S-7593 [4] WASHER-HARD (17X35X5-MM THK)  
5. 2V-1817 [4] SPACER (0.78X1.12X0.75-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24400249
 

150-4382: CYLINDER GP-BELT TENSIONER

150-4382 CYLINDER GP-BELT TENSIONER
S/N 2ZJ2522-UP
PART OF 9U-1844 BELT TENSIONER GP
i01092466 SEBP2440
1504382 CYLINDER GP-BELT TENSIONER Parts scheme
  For full view, you need register

Parts for your 65C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-4383 [1] CYLINDER AS  
2. 5M-6707 [1] VALVE-RELIEF  
3. 5M-6708 [1] WASHER (0.609X1.25X0.219-IN THK)  
4. 6E-1423 [1] SPRING  
5. 175-3184 [1] VALVE GP  
  175-3185 [1] CORE-VALVE  
  6J-0368 [1] CAP  
6. 177-9362 [1] MANIFOLD  
7. 6E-1424 [1] PISTON  
8. 1J-5281 J [1] RING-WEAR  
9. 6E-1460 J [1] SEAL AS-PISTON  
10. 5P-9402 [1] BOLT (1-1/2-12X5-IN)  
11. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
12. 6E-1427 [1] CAP  
13. 101-9742 [1] ROD AS  
14. 4D-4431 [1] BEARING-ALIGNING  
15. 9T-6941 [2] RING  
16. 8F-6230 J [1] SEAL-O-RING  
17. 8T-8383 J [1] SEAL-HEAD  
18. 8C-9200 J [1] RING-WEAR  
19. 6E-1459 J [2] SEAL AS-U-CUP  
20. 167-2467 J [1] SEAL-WIPER  
21. 112-5534 [2] PLATE-WARNING  
22. 4T-4273 Y [1] VALVE GP-BREAKER RELIEF  
23. 8T-0368 M [4] BOLT (M30X3.5X100-MM)  
24. 4K-0684 [4] WASHER-HARD (34X55X6-MM THK)  
25. 5F-7054 [2] SEAL-O-RING  
26. 103-5460 Y [1] VALVE GP-RELIEF  
27. 3K-0360 [1] SEAL-O-RING  
28. 163-8515 [1] SENSOR GP-PRESSURE  
29. 3J-1907 [1] SEAL-O-RING  
30. 5P-6944 [1] ADAPTER  
31. 6E-4761 [1] GUARD AS  
32. 7F-2122 J [1] SEAL-O-RING  
33. 0L-1351 [10] BOLT (3/8-16X0.875-IN)  
34. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
35. 2A-4639 [4] BOLT (3/8-16X1.625-IN)  
36. 6E-5600 [1] PLATE  
37. 100-5245 [1] PLATE  
38. 9X-0261 [1] ADAPTER  
39. 3J-7354 [1] SEAL-O-RING  
40. 198-0077 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  244-0970 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 65C :

FENDER GP
125-0128 FENDER GP
COUNTERWEIGHT GP
122-8591 COUNTERWEIGHT GP
COUNTERWEIGHT GP
108-1108 COUNTERWEIGHT GP
WHEEL GP-DRIVE
136-7628 WHEEL GP-DRIVE
WHEEL GP-DRIVE
136-7628 WHEEL GP-DRIVE
WHEEL GP-DRIVE
134-0783 WHEEL GP-DRIVE
WHEEL GP-DRIVE
134-0783 WHEEL GP-DRIVE
WHEEL GP-DRIVE
116-6977 WHEEL GP-DRIVE
GUARD GP-REAR
133-6298 GUARD GP-REAR
HOOD & GUARD GP
125-4271 HOOD & GUARD GP
MOUNTING GP-COUNTERWEIGHT
122-0537 MOUNTING GP-COUNTERWEIGHT
STEP GP
9U-1689 STEP GP
AXLE GP-FRONT
100-4548 AXLE GP-FRONT
AXLE GP-FRONT
100-4548 AXLE GP-FRONT
BELT TENSIONER GP
9U-1844 BELT TENSIONER GP
BELT TENSIONER GP
9U-1844 BELT TENSIONER GP

Truck sale:

CATERPILLAR 65C 1993
 
CATERPILLAR 65C 1993
- AG TRACTORS
FABICK CAT
 
 
CATERPILLAR 65C 1993
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
CATERPILLAR 65C 1994
$34,000 USD 
CATERPILLAR 65C 1994
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
 
$34,000 USD 
CATERPILLAR 65C 1994
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.