OPERATOR STATION
CONTROL GP-CLUTCH & BRAKECONTROL GP-HYDRAULIC
CONSOLE GP
PANEL GP
DUCT GP
HORN GP
CAB GP
OPERATOR STATION
CONTROL GP-CLUTCH & BRAKE
#SEBP24400370
9U-1698: CONTROL GP-CLUTCH & BRAKE
9U-1698 CONTROL GP-CLUTCH & BRAKE
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| -OR- | ||||
| 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | ||
| 2. | 1U-1968 | [2] | RING-RETAINING | |
| 3. | 2N-7228 B | [12] | WASHER (1X1.5X0.03-IN THK) | |
| 4. | 6H-3973 | [4] | BUSHING | |
| 5. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 6. | 9U-1880 | [1] | SUPPORT AS | |
| 7. | 8C-7315 | [2] | ROD END | |
| 8. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 3W-6462 | [1] | COVER | |
| 11. | 5G-9984 | [1] | COVER | |
| 12. | 8C-9757 | [1] | ROD END | |
| 13. | 9U-1956 | [1] | PEDAL AS-BRAKE | |
| 14. | 4E-3088 | [2] | BUMPER | |
| 15. | 9W-0586 | [1] | CABLE AS | |
| 16. | 9M-5870 | [1] | GROMMET | |
| 17. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 18. | 7G-6942 | [1] | SPRING | |
| 19. | 9U-1893 | [1] | PEDAL AS-CLUTCH | |
| 20. | 106-1548 | [1] | CABLE AS | |
| 3F-9559 | [4] | LOCKWASHER | ||
| 8S-5151 | [4] | NUT-JAM | ||
| 21. | 3W-6461 | [1] | SPRING | |
| 22. | 1A-0621 | [1] | GROMMET | |
| 23. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 24. | 1V-6341 | [1] | SEAL | |
| 25. | 3N-4875 | [1] | SPRING | |
| 26. | 8D-5294 | [1] | RING | |
| 27. | 8D-5295 | [1] | PIN | |
| 28. | 3W-7659 | [1] | GUIDE | |
| 29. | 2M-4036 | [1] | ROD END | |
| 30. | 5S-0003 | [2] | NUT (5/16-18-THD) | |
| 31. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 32. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | ||
| 33. | 9U-1882 | [1] | BRACKET | |
| 34. | 010-0741 | [2] | SCREW-MACHINE (6-32X0.875-IN) | |
| 35. | 7T-6141 | [1] | SWITCH AS (STOP) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 36. | 4J-8265 | [1] | NUT (3/8-16-THD) | |
| B | USE AS REQUIRED | |||
#SEBP24400371
4E-1246: CONTROL GP-HYDRAULIC HAND
4E-1246 CONTROL GP-HYDRAULIC HAND
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-9129 | [1] | SUPPORT AS | |
| 3H-5366 | [2] | STUD-WELD (1/4-20X0.625-IN) | ||
| 7T-1099 | [4] | LINK | ||
| 9F-2978 | [2] | NUT-WELD (3/8-16 THD) | ||
| 9V-7451 | [4] | NUT-WELD (1/4-20 THD) | ||
| 2. | 6D-0679 | [4] | KNOB | |
| 3. | 6V-8183 | [20] | NUT-FULL (3/8-24-THD) | |
| 4. | 3W-5951 | [4] | LEVER | |
| 5. | 3E-8536 | [2] | PLUG-PANEL OPENING | |
| 6. | 8T-4896 | [28] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 3K-6060 | [4] | LOCKNUT (3/8-16 THD) | |
| 8. | 4K-4726 | [8] | ROD END | |
| 9. | 8T-2501 | [4] | BOLT (3/8-16X2-IN) | |
| 10. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 11. | 4V-6981 | [4] | SCREW-BUTTON HEAD (1/4-20X0.75-IN) | |
| 12. | 2D-6235 | [4] | LOCKNUT (1/4-20 THD) | |
| 13. | 4N-3884 | [4] | WASHER-SPRING | |
| 14. | 4E-9431 | [4] | LEVER | |
| 15. | 9U-1443 | [4] | COVER-HANDLE |
#SEBP24400372
4E-1235: CONTROL GP-TRANSMISSION
4E-1235 CONTROL GP-TRANSMISSION
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644 CAB GP
Type 1
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644 CAB GP
Type 1
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2Y-5671 B | [8] | WASHER (19.43X33X0.91-MM THK) | |
| 2. | 4E-1251 | [2] | BUSHING | |
| 3. | 2H-6265 | [2] | PIN-ROLL | |
| 4. | 4E-1241 | [1] | SHAFT | |
| 5. | 1K-0485 | [2] | WASHER (19.4X34.9X2.5-MM THK) | |
| 6. | 7X-0313 | [1] | BOLT (7/16-14X2.75-IN) | |
| 7X-0447 | [1] | NUT (7/16-14-THD) | ||
| 7. | 121-4746 | [1] | GATE | |
| 8. | 4B-8710 | [1] | SPRING | |
| 9. | 121-4742 | [1] | LEVER AS-SHIFT | |
| 4E-1251 | [1] | BUSHING | ||
| 10. | 4E-1236 | [1] | PLATE AS | |
| 9F-2978 | [9] | NUT-WELD (3/8-16-THD) | ||
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 11. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 12. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 4E-0795 | [1] | SUPPORT AS | |
| 14. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 9X-4232 | [1] | SWITCH AS-LIMIT (NEUTRAL START LOCKOUT) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 16. | 010-0741 | [2] | SCREW-MACHINE (6-32X0.875-IN) | |
| 17. | 121-9703 | [1] | LEVER AS | |
| 4E-1241 | [1] | SHAFT | ||
| 18. | 6V-8183 | [1] | NUT-FULL (3/8-24-THD) | |
| 19. | 3W-9680 | [1] | KNOB | |
| 20. | 2D-6235 | [4] | LOCKNUT (1/4-20-THD) | |
| 21. | 8T-5360 | [1] | WASHER (12X22.5X2.5-MM THK) | |
| 22. | 121-4745 | [1] | HANDHOLD | |
| 23. | 031-0217 | [2] | BOLT-LOCKING (1/4-20X0.875-IN) | |
| 24. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 25. | 4V-6981 | [4] | SCREW-BUTTON HEAD (1/4-20X0.75-IN) | |
| B | USE AS REQUIRED | |||
#SEBP24400373
4E-1235: CONTROL GP-TRANSMISSION
4E-1235 CONTROL GP-TRANSMISSION
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
Type 2
S/N 2ZJ1965-UP
PART OF 124-4633, 124-4644, 9U-1321 CAB GP
Type 2
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2Y-5671 B | [8] | WASHER (19.43X33X0.91-MM THK) | |
| 2. | 4E-1251 | [2] | BUSHING | |
| 3. | 2H-6265 | [2] | PIN-ROLL | |
| 4. | 4E-1241 | [1] | SHAFT | |
| 5. | 1K-0485 | [2] | WASHER (19.4X34.9X2.5-MM THK) | |
| 6. | 7X-0313 | [1] | BOLT (7/16-14X2.75-IN) | |
| 7X-0447 | [1] | NUT (7/16-14-THD) | ||
| 7. | 121-4746 | [1] | GATE | |
| 8. | 4B-8710 | [1] | SPRING | |
| 9. | 121-4742 | [1] | LEVER AS-SHIFT | |
| 4E-1251 | [1] | BUSHING | ||
| 10. | 4E-1236 | [1] | PLATE AS | |
| 9F-2978 | [9] | NUT-WELD (3/8-16-THD) | ||
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 11. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 12. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 4E-0795 | [1] | SUPPORT AS | |
| 14. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 9X-4232 | [1] | SWITCH AS-LIMIT (NEUTRAL START LOCKOUT) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 16. | 010-0741 | [2] | SCREW-MACHINE (6-32X0.875-IN) | |
| 17. | 139-4221 C | [1] | LEVER AS | |
| 4E-1241 | [1] | SHAFT | ||
| 18. | 6V-8183 | [1] | NUT-FULL (3/8-24-THD) | |
| 19. | 3W-9680 | [1] | KNOB | |
| 20. | 2D-6235 | [4] | LOCKNUT (1/4-20-THD) | |
| 21. | 8T-5360 | [1] | WASHER (12X22.5X2.5-MM THK) | |
| 22. | 121-4745 | [1] | HANDHOLD | |
| 23. | 031-0217 | [2] | BOLT-LOCKING (1/4-20X0.875-IN) | |
| 24. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 25. | 4V-6981 | [4] | SCREW-BUTTON HEAD (1/4-20X0.75-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24400374
9U-1701: COVER GP-DASH
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-2691 | [1] | COVER-DASH | |
| 2. | 145-0344 | [1] | COVER-COLUMN | |
| 3. | 6V-8185 | [3] | NUT (1/4-20-THD) | |
| 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 4. | 6V-8969 | [6] | SCREW-BUTTON HEAD | |
| 5. | 4D-2303 B | [4] | WASHER (0.27X0.81X0.062-IN THK)(1.57MM THK) | |
| 6. | 4D-2303 | [4] | WASHER (0.27X0.81X0.062-IN THK)(1.57MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP24400375
124-4632: COVER GP-DASH
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS#SEBP24400376
9U-1703: DUCT & CONTROL GP
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-2731 | [1] | DUCT AS-LH | |
| 8B-1910 | [1] | BOSS (3/8-16X0.95-IN) | ||
| 2. | 9U-2757 | [1] | DUCT AS-RH | |
| 8B-1910 | [1] | BOSS (3/8-16X0.95-IN) | ||
| 3. | 9U-2760 | [4] | LOUVER AS | |
| 4. | 6V-8185 | [8] | NUT (1/4-20-THD) | |
| 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5. | 9U-2759 BE | HOSE (17.5CM) | ||
| 6. | 9U-2759 BE | HOSE (15CM) | ||
| 7. | 9U-2163 | [2] | LOUVER AS | |
| 8. | 6V-6110 | [1] | CABLE AS | |
| 9. | 3E-7788 | [1] | KNOB | |
| 10. | 6P-6590 | [1] | GROMMET | |
| 11. | 9U-2164 | [4] | LOUVER AS | |
| 12. | 3E-6696 E | HOSE (20CM) | ||
| 13. | 9U-2759 E | HOSE (20CM) | ||
| 14. | 3E-6696 E | HOSE (33CM) | ||
| 15. | 116-2643 | [2] | INSULATION | |
| 16. | 116-2644 | [1] | INSULATION | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24400377
124-4802: DUCT & CONTROL GP
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-4636 | [1] | DUCT AS | |
| 8B-1910 | [1] | BOSS (3/8-16X0.95-IN) | ||
| 2. | 124-4642 | [1] | DUCT AS | |
| 8B-1910 | [1] | BOSS (3/8-16X0.95-IN) | ||
| 3. | 9U-2760 | [6] | LOUVER AS | |
| 4. | 6V-8185 | [8] | NUT (1/4-20-THD) | |
| 5. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 6. | 9U-2759 E | [2] | HOSE (15CM EACH) | |
| 7. | 6V-6110 | [1] | CABLE AS | |
| 8. | 3E-7788 | [1] | KNOB | |
| 9. | 6P-6590 | [1] | GROMMET | |
| 10. | 116-2643 | [2] | INSULATION | |
| 11. | 116-2644 | [1] | INSULATION | |
| 12. | 9U-2759 E | [2] | HOSE (17.5CM EACH) | |
| 13. | 9U-2759 E | [2] | HOSE (33CM EACH) | |
| 14. | 9U-2759 E | [2] | HOSE (20CM EACH) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP24400378
108-4229: HORN GP-ELECTRIC
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS#SEBP24400379
113-7255: INSTALLATION GP-CAB
For full view, you need register
Parts for your 65C CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-9600 | [1] | SUPPORT AS | |
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 2. | 3W-9594 | [1] | PLATE | |
| 3. | 4E-4485 | [1] | LEVER AS-BRAKE | |
| 4. | 3T-3133 | [1] | SWITCH AS-PUSH BUTTON (PARKING BRAKE) | |
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 2H-3922 | [1] | LOCKWASHER | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER (5MM ID) | ||
| 5. | 030-9612 | [2] | SCREW-FORMING (10-24X0.5-IN) | |
| 6. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 7. | 5P-1075 | [12] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 8T-9364 | [2] | BOLT (1/4-20X0.625-IN) | |
| 9. | 7I-3118 | [1] | BRACKET | |
| 10. | 6L-7751 | [7] | ROD END | |
| 11. | 7X-2501 | [3] | BOLT (1/4-20X1.25-IN) | |
| 12. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 2D-6235 | [5] | LOCKNUT (1/4-20-THD) | |
| 14. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 15. | 8T-8932 | [4] | PIN AS-SPRING | |
| 5P-6438 | [4] | END-YOKE ROD | ||
| 16. | 5M-3062 | [3] | BOLT (3/8-16X0.75-IN) | |
| 17. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 9V-9261 | [1] | CLAMP | |
| 19. | 3E-7612 | [4] | CABLE AS | |
| 20. | 8T-3410 BD | SEAL | ||
| 21. | 9W-1445 | [1] | CABLE AS | |
| 22. | 7T-9579 | [1] | CABLE AS | |
| 23. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 24. | 1V-6341 | [1] | SEAL (30.15MM OD) | |
| 25. | 9G-0715 | [1] | COVER | |
| 26. | 7F-8267 | [2] | SEAL-O-RING | |
| 27. | 5P-9297 | [2] | CLIP | |
| 28. | 3E-0354 | [1] | CABLE AS | |
| 29. | 5G-4944 | [1] | LEVER | |
| 30. | 125-5840 CY | [1] | AIR CONDITIONER GP | |
| 31. | 6V-8801 | [6] | NUT (3/8-16-THD) | |
| 32. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 33. | 6V-5645 | [4] | SCREW-MACHINE (10-32X0.87-IN) | |
| 34. | 4E-3884 | [1] | ANGLE | |
| 35. | 8T-8908 | [5] | BOLT (1/4-20X1-IN) | |
| 36. | 9J-0389 | [1] | PIN-CLEVIS | |
| 8D-5294 | [1] | RING | ||
| 8T-6987 | [1] | END-YOKE ROD | ||
| 37. | 3B-4612 | [1] | PIN-COTTER | |
| 1B-0676 | [1] | PIN | ||
| 38. | 4H-2558 | [2] | GROMMET | |
| 39. | 111-0160 | [2] | KNOB | |
| 40. | 100-8495 | [2] | CABLE AS | |
| 41. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK)(21MM OD) | |
| 42. | 031-0217 | [1] | BOLT-LOCKING (1/4-20X0.875-IN) | |
| 43. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 44. | 8T-3410 BD | SEAL | ||
| 45. | 1D-4643 | [4] | BOLT (1-8X5.5-IN) | |
| 6T-8714 | [4] | WASHER-HARD (28X125X12-MM THK) | ||
| 46. | 5P-6264 | [5] | GROMMET | |
| 47. | 4M-0061 | [4] | BOLT (5/16-18X0.75-IN) | |
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 3W-3165 | [4] | SPACER (10X18X6-MM THK) | ||
| 48. | 4E-1270 | [1] | PLATE AS | |
| 49. | 117-6154 C | [1] | INSULATION | |
| 50. | 124-4661 C | [1] | FLOOR MAT | |
| 124-4656 | [1] | FLOOR MAT | ||
| 51. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 52. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 53. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 54. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 55. | 137-8532 | [8] | MOUNT AS | |
| 56. | 9D-3769 | [2] | GROMMET | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| Y | SEPARATE ILLUSTRATION | |||
