376-1599 ENGINE AR-COMPLETE RATED SPEED 1301-RPM TO 1800-RPM 3512B GEN SET ENGINE

Part No	Qty	Parts name
107-7196 Y	[1]	AFTERCOOLER GP-TREATED WATER
124-5512 Y	[1]	BREATHER GP (CRANKCASE)
106-4586 Y	[1]	CAMSHAFT GP
8N-9161 Y	[1]	CONNECTION GP-WATER
220-2677 Y	[1]	CONTROL & MTG GP-ENGINE ELEK (PRIMARY)
4W-5892 Y	[1]	COOLER GP-ENGINE OIL
533-1253 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
7E-6432 Y	[1]	COVER GP-FLYWHEEL HOUSING (REAR STRUCTURE)
147-3182 Y	[1]	COVER GP-FRONT HOUSING (FRONT STRUCTURE)
101-0831 Y	[9]	COVER GP-VALVE MECHANISM
8N-7103 Y	[1]	CRANKSHAFT GP
240-6651 Y	[1]	CYLINDER BLOCK GP
101-0830 Y	[12]	CYLINDER HEAD GP
8N-0339 Y	[1]	DAMPER GP
7E-7647 Y	[1]	DRIVE GP-ACCESSORY (LOWER, LH)
107-7361 Y	[1]	DRIVE GP-ACCESSORY (UPPER, RH)
7N-1875 Y	[1]	FILLER GP-ENGINE OIL (CYLINDER BLOCK)
112-4921 Y	[1]	FILTER GP-ENGINE OIL (RH)
112-4922 Y	[1]	FILTER GP-FUEL (RH)
7N-4851 Y	[1]	FLYWHEEL GP
7C-6366 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
8N-7174 Y	[1]	GEAR GP-FRONT (STANDARD ROTATION)
124-8395 Y	[1]	GEAR GP-REAR (CAMSHAFT DRIVE)
9Y-9171 Y	[1]	HOUSING & REGULATOR GP (OUTLET CONTROL)
297-7000 Y	[1]	HOUSING GP-FLYWHEEL
4P-5426 Y	[1]	HOUSING GP-FRONT (ACCESSORY DRIVE)
7E-6872 Y	[1]	LIFTING GP-ENGINE
106-7596 Y	[1]	LINES GP-AIR (INLET)
379-6975 Y	[1]	LINES GP-ENGINE OIL
262-6760 Y	[1]	LINES GP-FUEL INJECTION
101-1255 Y	[1]	LINES GP-TURBOCHARGER OIL
102-3517 Y	[1]	LINES GP-WATER (UPPER)
114-3376 Y	[1]	LINES GP-WATER (LOWER)
283-7179 Y	[1]	LINES GP-WATER (BYPASS)
101-1259 Y	[1]	MANIFOLD GP-EXHAUST
7C-6752 Y	[1]	PAN GP-OIL (ENGINE)
281-6139 Y	[12]	PISTON & ROD GP
9Y-8175 Y	[1]	PUMP GP-AUXILIARY WATER (AFTERCOOLER)
8N-6152 Y	[1]	PUMP GP-ENGINE OIL (2-SECTION GEAR)
116-7010 Y	[12]	PUMP GP-FUEL INJECTION
8N-6151 Y	[1]	PUMP GP-FUEL TRANSFER (1-SECTION GEAR)
2W-9729 Y	[1]	PUMP GP-WATER
197-9065 Y	[1]	REGULATOR GP-TEMPERATURE
7W-3813 Y	[1]	SEAL GP-CRANKSHAFT
259-2168 Y	[1]	SENSOR GP-TEMPERATURE (ENGINE OIL)
116-0687 Y	[1]	TURBOCHARGER GP
224-9869 Y	[12]	VALVE MECHANISM GP
237-9012 Y	[1]	WIRING GP-ENGINE
246-9375 Y	[1]	WIRING GP-SENSOR (COOLANT LEVEL, OIL TEMPERATURE)

237-0599	[1]	SHIELD AS-HEAT (AFTERCOOLER SEAL)

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP24420011

253-2468: BARRING GP

BARRING GP

253-2468 BARRING GP -RH
AN ATTACHMENT

i02113355 SEBP2442

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	448-5087 J	[1]	TOOL-BARRING
2.	4H-7869	[1]	GASKET

			AVAILABLE REPAIR KIT(S):
	450-3711 J	[1]	KIT-BUSHING
			(INCLUDES BEARING & DOWEL)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP24420012

5R-7425: BARRING GP

BARRING GP

5R-7425 BARRING GP -LH
AN ATTACHMENT

i00391585 SEBP2442

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	448-5087 J	[1]	TOOL-BARRING
2.	4H-7869	[1]	GASKET

			AVAILABLE REPAIR KIT(S):
	450-3711 J	[1]	KIT-BUSHING
			(INCLUDES BEARING & DOWEL)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP24420013

120-7413: BASE GP-VALVE COVER

BASE GP-VALVE COVER

120-7413 BASE GP-VALVE COVER
S/N 8RM1-760
PART OF 100-3905, 195-1928, 224-9869 VALVE MECHANISM GP

i00094568 SEBP2442

1207413 BASE GP-VALVE COVER Parts scheme

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-0839	[1]	SPACER (17.5X30.94X98-MM)
2.	6V-6228	[3]	SEAL-O-RING
3.	119-0838	[1]	SPACER (17.5X30.94X98-MM)
4.	120-7412	[1]	BASE AS-ROCKER ARM
4A.	120-4339	[1]	WASHER-SPRING
4B.	8N-4387	[1]	DOWEL-HOLLOW

#SEBP24420014

247-8341: BASE GP-VALVE COVER

BASE GP-VALVE COVER

247-8341 BASE GP-VALVE COVER
PART OF 224-9869 VALVE MECHANISM GP

i02152443 SEBP2442

2478341 BASE GP-VALVE COVER Parts scheme

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-0839	[1]	SPACER (17.5X30.94X98-MM)
2.	6V-6228	[3]	SEAL-O-RING
3.	119-0838	[1]	SPACER (17.5X30.94X98-MM)
4.	247-8340	[1]	BASE AS
4A.	120-4339	[1]	WASHER-SPRING
4B.	261-0195	[1]	DOWEL-HOLLOW

#SEBP24420015

106-4586: CAMSHAFT GP

CAMSHAFT GP

106-4586 CAMSHAFT GP
S/N 8RM1-464

i00489515 SEBP2442

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-3216	[2]	SPACER (35.035X84X12-MM THK)
2.	128-5994	[2]	WASHER AS-THRUST
			(EACH INCLUDES)
	4B-4161	[1]	SCREW-DRIVE (NO 6X3/8-IN)
3.	127-5410	[1]	CAMSHAFT AS
	4N-1650	[1]	DOWEL
4.	5P-0076	[16]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
5.	127-5411	[1]	CAMSHAFT AS
	5B-5821	[1]	DOWEL
6.	127-5412	[1]	CAMSHAFT AS
	4N-1650	[1]	DOWEL
7.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
8.	4W-6664	[2]	PLATE AS-TIMING
9.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
10.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	133-4080	[1]	CAMSHAFT AS
	5B-5821	[1]	DOWEL
12.	117-9308	[2]	PLATE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24420016

106-4586: CAMSHAFT GP

CAMSHAFT GP

106-4586 CAMSHAFT GP

i01267503 SEBP2442

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	452-2501	[1]	CAMSHAFT AS (REAR, RH)
	4N-1650	[1]	DOWEL
2.	5P-0076	[16]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
3.	452-2502	[1]	CAMSHAFT AS (REAR, LH)
	5B-5821	[1]	DOWEL
4.	452-2503	[1]	CAMSHAFT AS (FRONT, LH)
	4N-1650	[1]	DOWEL
5.	7N-3218 C	[2]	WASHER-THRUST
6.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	452-2504	[1]	CAMSHAFT AS (FRONT, RH)
	5B-5821	[1]	DOWEL
9.	4W-6664	[2]	PLATE AS-TIMING
10.	7N-3216	[2]	SPACER (35.035X84X12-MM THK)
11.	1A-2029 C	[4]	BOLT (3/8-16X1.125-IN)
12.	8M-9024	[4]	WASHER-HARD (10.2X22.5X5-MM THK)
13.	250-3444	[1]	FILM-INFORMATION (STANDARD ROTATION)
14.	310-2131	[1]	FILM-INFORMATION (ROTATION, FIRING ORDER)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24420017

247-0308: COUPLING GP-FLEXIBLE

COUPLING GP-FLEXIBLE

247-0308 COUPLING GP-FLEXIBLE -GENERATOR
72-SHORE HARDNESS. 18000-SERIES
PART OF 268-6475 COUPLING GP-FLEXIBLE
AN ATTACHMENT

i02108872 SEBP2442

2470308 COUPLING GP-FLEXIBLE Parts scheme

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	398-0053	[1]	COUPLING-OUTER
2.	248-2432	[12]	WASHER (17X30X3-MM THK)
3.	249-0059	[1]	COUPLING-INNER

#SEBP24420018

268-6475: COUPLING GP-FLEXIBLE

COUPLING GP-FLEXIBLE

268-6475 COUPLING GP-FLEXIBLE -GENERATOR
AN ATTACHMENT

i02305975 SEBP2442

2686475 COUPLING GP-FLEXIBLE Parts scheme

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	247-0308 Y	[1]	COUPLING GP-FLEXIBLE
2.	4M-6953	[8]	WASHER-HARD (24X38X3.5-MM THK)
3.	8D-7942	[12]	BOLT-12 POINT HEAD (5/8-11X6.5-IN)
4.	9X-2119	[8]	BOLT-12 POINT HEAD (7/8-9X2.5-IN)
5.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	8T-8919	[16]	BOLT (1/2-13X1.75-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP24420019

5N-3765: COUPLING GP-FLEXIBLE

COUPLING GP-FLEXIBLE

5N-3765 COUPLING GP-FLEXIBLE -VISCOUS DAMPENED
AN ATTACHMENT

i00384815 SEBP2442

5N3765 COUPLING GP-FLEXIBLE Parts scheme

For full view, you need register

Parts for your 3512B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5N-3284	[1]	COUPLING-OUTER
2.	0S-1589	[12]	BOLT (5/8-11X1.75-IN)
3.	9H-0846	[2]	SEAL-O-RING
4.	1A-8537	[12]	BOLT (5/8-11X2.75-IN)
5.	4D-3704	[24]	WASHER-HARD (17X30X5-MM THK)
6.	5N-3272	[3]	BOOT-RUBBER COUPLING
7.	3N-6666	[1]	COUPLING-DRIVE
8.	5N-3274	[1]	PLATE

	5N-5561 BF		LUBRICANT-SILICONE
	B		USE AS REQUIRED
	F		NOT SHOWN

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Dynamometer Testing of Electronic Engines{1000}
1995/10/01

Procedure For Providing A "Speed Signal" To The Engine Control Module (ECM) When The Woodward Load Share Module Is Not Being Powered By The Generator{4450,1915}
1996/11/01

New Engine News Special Edition, Product Support Update-3500 Diesel Commercial Engines, SEBD9243 Is Available{1000}
1997/05/01

Troubleshooting Data Sheet For Diesel Engines {1000}
1997/08/01

Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01

Several New Service Manuals And Revised Service Manual Modules Available {0374,1000}
1999/06/01

Several New Service Manuals and Revised Service Manual Modules Available{0374,1000}
1999/08/01

Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000}
2002/03/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Responsibilities for Emission Certified Engines {1000}
2005/10/03

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Cat® Reman Announces Engine, Short Block, and Long Block Options for Cat Electric Power Applications {1000}
2015/09/11

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Starting the Engine
3500 and 3500B Engines

Engine - Clean
3500 and 3500B Engines

Maintenance Recommendations
3500 and 3500B Engines

Welding on Engines with Electronic Controls
3500 and 3500B Engines

Special Instruction

Generator Set Start-up Checklist{1021, 1404, 7002}
Generator Set Start-up Checklist{1021, 1404, 7002}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}

Procedure for Cleaning an Engine that is Saturated with Water{1000}
Procedure for Cleaning an Engine that is Saturated with Water{1000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.

Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators
Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators

Product Support Program For Providing Proper Communications Between Electronic Control Module And Emcpii On Certain 3508B, 3512B And 3516B Engine Generator Sets
Product Support Program For Providing Proper Communications Between Electronic Control Module And Emcpii On Certain 3508B, 3512B And 3516B Engine Generator Sets

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Australia

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-CFEL

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-CSARL

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Americas

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Brazil

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}

Crankshaft Front and Rear End Oil Seals May Fail on Certain Cat® Engines {1000, 7555}
Crankshaft Front and Rear End Oil Seals May Fail on Certain Cat^® Engines {1000, 7555}

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Service Letter-China

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Asia

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Reman adds Short Block options for the 3508/3512/3516 Engines
Reman adds Short Block options for the 3508/3512/3516 Engines

Reman Announces C18, C32 and 3500 Engine Options for Electric Power Applications
Reman Announces C18, C32 and 3500 Engine Options for Electric Power Applications

Service Letter-APD

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Testing and Adjusting

Engine Rotation
3500B Engines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3512B :

158-6170 CONVERSION AR-GENERATOR SET

158-6169 CONVERSION AR-GENERATOR SET

158-6168 CONVERSION AR-GENERATOR SET

158-6167 CONVERSION AR-GENERATOR SET

253-2468 BARRING GP

5R-7425 BARRING GP

120-7413 BASE GP-VALVE COVER

247-8341 BASE GP-VALVE COVER

106-4586 CAMSHAFT GP

247-0308 COUPLING GP-FLEXIBLE

268-6475 COUPLING GP-FLEXIBLE

Truck sale:

Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

182,189

Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH

Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY

190,000

Caterpillar 3512B, Stationary Generator Sets, Construction