AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

128-1199 CONTROL GP-HYD RETRVL DEVICE S/N 4LR1-UP PART OF 125-9273 RETRIEVAL DEVICE AR-HYDRAULIC AN ATTACHMENT 515


WORK TOOLS
RETRIEVAL DEVICE GP-HYDRAULIC
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC
WORK TOOLS
GRAPPLE GP
WINCH GP

WHEEL SKIDDER 515 WHEEL SKIDDER 4LR
 515 Wheel Skidder 4LR00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2447 515 4LR   (1995)

WORK TOOLS

RETRIEVAL DEVICE GP-HYDRAULIC
CONTROL GP-HYD RETRVL DEVICE
128-1199 CONTROL GP-HYD RETRVL DEVICE
GUARD GP-HYD RETRIEVAL DEVICE
128-2008 GUARD GP-HYD RETRIEVAL DEVICE
GUARD GP-HYD RETRIEVAL DEVICE
128-2008 GUARD GP-HYD RETRIEVAL DEVICE
MOUNTING GP-HYD RETRVL DEVICE
126-1729 MOUNTING GP-HYD RETRVL DEVICE
125-9273 RETRIEVAL DEVICE AR-HYDRAULIC
RETRIEVAL DEVICE GP-HYDRAULIC
128-1198 RETRIEVAL DEVICE GP-HYDRAULIC
 

#SEBP24470640
 

128-1199: CONTROL GP-HYD RETRVL DEVICE

128-1199 CONTROL GP-HYD RETRVL DEVICE
S/N 4LR1-UP
PART OF 125-9273 RETRIEVAL DEVICE AR-HYDRAULIC
AN ATTACHMENT
i00171925 SEBP2447
1281199 CONTROL GP-HYD RETRVL DEVICE Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-6463 [1] SWITCH AS (FREESPOOL)  
  3E-8825 [4] LAMP (24-VOLT)  
  129-6460 [1] ACTUATOR  
2. 3E-8858 [1] SWITCH AS (IN/OUT)  
  3E-8825 [4] LAMP (24-VOLT)  
  129-6459 [1] ACTUATOR  
3. 3E-5239 [1] RELAY AS (24-VOLT)(FREESPOOL)  
4. 4B-2047 [1] NUT (10-24-THD)  
5. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
 

#SEBP24470641
 

118-5394: CONTROL GP-WINCH

118-5394 CONTROL GP-WINCH
S/N 4LR1-687
PART OF 9U-2879 WINCH AR-SKIDDER
AN ATTACHMENT
i00484905 SEBP2447
1185394 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-0679 [1] KNOB  
2. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
3. 9U-3580 [1] LEVER AS  
4. 6V-8187 [2] NUT (1/4-28-THD)  
5. 1H-7459 [1] GROMMET  
6. 130-5609 [1] CABLE AS  
7. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
8. 6V-3338 [1] END-YOKE ROD  
9. 7B-7210 [1] PIN  
10. 3B-4607 [1] PIN-COTTER  
11. 6I-9358 [1] VALVE AS-CONTROL  
  110-8707 [1] SEAL-LIP TYPE  
12. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
13. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 109-3286 [1] BRACKET AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
15. 112-6367 [1] BRACKET AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
16. 112-6946 [1] VALVE GP-PRESSURE REDUCING  
17. 8T-2501 [2] BOLT (3/8-16X2-IN)  
18. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
19. 122-9449 [1] LEVER AS  
20. 8F-7702 [2] SEAL-LIP TYPE  
21. 8B-4132 [2] BEARING AS-NEEDLE  
22. 8G-6716 [1] SUPPORT  
23. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
24. 5G-6417 [1] SPACER (15-MM THK)  
25. 8D-8279 [2] WASHER-THRUST  
26. 9G-9923 [1] PIN  
27. 4M-6425 [1] BOLT (5/16-18X1-IN)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 5P-7704 [1] ROD END  
30. 6V-8189 [2] NUT (5/16-18-THD)  
31. 123-3814 [1] FILM-INSTRUCTION  
32. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
 

#SEBP24470642
 

159-2815: CONTROL GP-WINCH

159-2815 CONTROL GP-WINCH
S/N 4LR688-691
PART OF 159-0039 WINCH AR
AN ATTACHMENT
i00942691 SEBP2447
1592815 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-6457 [1] ROD  
2. 5G-6417 [1] SPACER (15-MM THK)  
3. 5P-7704 [1] ROD END  
4. 2A-1736 [1] HANDLE  
5. 6D-5974 [2] BEARING-ROLLER  
6. 6V-8187 [2] NUT (1/4-28-THD)  
7. 8B-4132 [2] BEARING AS-NEEDLE  
8. 8D-8279 [2] WASHER-THRUST  
9. 8F-7702 [2] SEAL-LIP TYPE  
10. 8G-6716 [1] SUPPORT  
11. 9F-6655 [1] WASHER (0.766X1.5X0.125-IN)  
12. 9X-9923 [1] CABLE AS  
13. 122-9449 [1] LEVER AS  
14. 169-0175 [1] LEVER  
15. [1] PLATE  
16. 161-6623 [1] SHAFT AS  
17. [1] LEVER AS  
18. 106-9898 [1] END-YOKE ROD  
19. 1H-7459 [1] GROMMET  
20. 2M-8340 [1] ROD END  
21. 2J-6356 [1] RING-RETAINING  
22. 3B-4607 [3] PIN-COTTER  
23. 3B-4615 [1] PIN-COTTER  
24. 5M-3062 [5] BOLT (3/8-16X0.75-IN)  
25. 4M-6425 [1] BOLT (5/16-18X1-IN)  
27. 6W-5752 [1] PIN  
28. 6G-3642 [1] ROD END (1/4-28-THD)  
29. 6V-3338 [1] END-YOKE ROD  
30. 9S-5585 [2] NUT-FULL (1/2-20-THD)  
31. 6V-8189 [2] NUT (5/16-18-THD)  
32. 7B-7210 [1] PIN  
33. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
34. 8K-1255 [2] PIN  
35. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
36. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
37. 9G-9923 [1] PIN  
 

#SEBP24470643
 

159-2815: CONTROL GP-WINCH

159-2815 CONTROL GP-WINCH
S/N 4LR692-722
PART OF 159-0039 WINCH AR
AN ATTACHMENT
i01098535 SEBP2447
1592815 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-7141 C [1] ROD  
2. 5G-6417 [1] SPACER (15-MM THK)  
3. 5P-7704 [1] ROD END  
4. 2A-1736 [1] HANDLE  
5. 6D-5974 [2] BEARING-ROLLER  
6. 6V-8187 C [3] NUT (1/4-28-THD)  
7. 8B-4132 [2] BEARING AS-NEEDLE  
8. 8D-8279 [2] WASHER-THRUST  
9. 8F-7702 [2] SEAL-LIP TYPE  
10. 8G-6716 [1] SUPPORT  
11. 9F-6655 [1] WASHER (0.766X1.5X0.125-IN)  
12. 9X-9923 [1] CABLE AS  
13. 122-9449 [1] LEVER AS  
  122-9442 [1] ROD  
14. 169-0175 [1] LEVER  
15. 173-8286 C [1] PLATE AS  
16. 161-6623 [1] SHAFT AS  
17. [1] LEVER AS  
18. 106-9898 C [2] END-YOKE ROD  
19. 1H-7459 [1] GROMMET  
20. 2M-8340 [1] ROD END  
21. 2J-6356 [1] RING-RETAINING  
22. 3B-4607 [3] PIN-COTTER  
23. 3B-4615 [1] PIN-COTTER  
24. 8T-4137 CM [5] BOLT (M10X1.5X20-MM)  
25. 4M-6425 [1] BOLT (5/16-18X1-IN)  
27. 6W-5752 [1] PIN  
28. 8P-4871 C [1] ROD  
29. 6V-3338 [1] END-YOKE ROD  
30. 9S-5585 [1] NUT-FULL (1/2-20-THD)  
  0L-1013 [1] NUT (1/2-20-THD)  
31. 6V-8189 [2] NUT (5/16-18-THD)  
32. 7B-7210 [1] PIN  
33. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
34. 8K-1255 [2] PIN  
35. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
36. 8T-4121 C [5] WASHER-HARD (11X21X2.5-MM THK)  
37. 9G-9923 [1] PIN  
38. 174-4166 C [1] FILM-NOTICE (WINCH OPERATION)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24470644
 

159-2815: CONTROL GP-WINCH

159-2815 CONTROL GP-WINCH
S/N 4LR723-UP
PART OF 159-0039 WINCH AR
AN ATTACHMENT
i01163086 SEBP2447
1592815 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-7141 [1] ROD  
2. 5G-6417 [1] SPACER (15-MM THK)  
3. 5P-7704 [1] ROD END  
4. 2A-1736 [1] HANDLE  
5. 6D-5974 [2] BEARING-ROLLER  
6. 6V-8187 C [4] NUT (1/4-28-THD)  
7. 8B-4132 [2] BEARING AS-NEEDLE  
8. 8D-8279 [2] WASHER-THRUST  
9. 8F-7702 [2] SEAL-LIP TYPE  
10. 8G-6716 [1] SUPPORT  
11. 9F-6655 [1] WASHER (0.766X1.5X0.125-IN)  
12. 9X-9923 [1] CABLE AS  
13. 122-9449 [1] LEVER AS  
  122-9442 [1] ROD  
14. 169-0175 [1] LEVER  
15. 173-8286 [1] PLATE AS  
16. 161-6623 [1] SHAFT AS  
17. [1] LEVER AS  
18. 174-4166 [1] FILM-NOTICE (WINCH OPERATION)  
19. 1H-7459 [1] GROMMET  
20. 2M-8340 [1] ROD END  
21. 2J-6356 [1] RING-RETAINING  
22. 3B-4607 [3] PIN-COTTER  
23. 3B-4615 [1] PIN-COTTER  
24. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
25. 4M-6425 [1] BOLT (5/16-18X1-IN)  
27. 6W-5752 [1] PIN  
28. 8P-4871 [1] ROD  
29. 6V-3338 C [3] END-YOKE ROD  
30. 9S-5585 [2] NUT-FULL (1/2-20-THD)  
31. 6V-8189 C [1] NUT (5/16-18-THD)  
32. 7B-7210 C [3] PIN  
33. 9G-9923 [1] PIN  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4224 C [1] WASHER-HARD (8.8X16X2-MM THK)  
36. 174-7920 [1] FILM-INSTRUCTION (WINCH CONTROL)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24470645
 

172-0314: CONTROL GP-WINCH HYDRAULIC

172-0314 CONTROL GP-WINCH HYDRAULIC
S/N 4LR688-UP
PART OF 159-0043 WINCH GP-SKIDDER
AN ATTACHMENT
i01084079 SEBP2447
1720314 CONTROL GP-WINCH HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-4907 [1] PLUG  
2. 158-6530 [2] FITTING AS  
3. 161-6464 [1] RETAINER-SPRING  
4. 162-0188 [1] SEAL  
5. 172-0315 [1] BODY-SELECTOR VALVE  
6. 172-0316 [1] SPOOL AS  
  4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
  228-5325 [1] BOLT-SELF-LOCKING  
  161-6460 [1] WASHER  
  161-6463 [1] WASHER  
  176-1311 [1] SPRING  
7. 173-9887 [1] VALVE AS-RELIEF  
8. 173-9890 [3] ORIFICE  
9. 102-0883 [1] PLUG-PIPE  
10. 7M-8485 [3] SEAL-O-RING  
11. 9S-9334 [1] PLUG (1-5/16-12-THD)  
 

#SEBP24470646
 

126-0878: CROSSHEAD GP-GRAPPLE

126-0878 CROSSHEAD GP-GRAPPLE
S/N 4LR1-UP
PART OF 126-6258, 157-6005 GRAPPLE AR-BUNCHING, 123-6785 GRAPPLE AR-SORTING
AN ATTACHMENT
i00171899 SEBP2447
1260878 CROSSHEAD GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-7114 [1] LINK  
2. 2K-0227 [4] BUSHING  
3. 131-1832 [4] DISC-FRICTION  
4. 178-8002 [4] RETAINER  
5. 158-3645 [4] SPRING AS  
6. 158-3646 [2] SPACER  
7. 125-0123 [2] PIN  
8. 196-5490 [2] PIN  
9. 125-0141 [2] PLATE-LOCK  
10. 125-0142 [2] NUT-ACORN  
11. 8T-6430 M [2] BOLT (M20X2.5X50-MM)  
12. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
13. 7K-9203 [4] SEAL-LIP TYPE  
  M   METRIC PART
 

#SEBP24470647
 

157-6025: CROSSHEAD GP-GRAPPLE

157-6025 CROSSHEAD GP-GRAPPLE
S/N 4LR1-706
PART OF 157-6005 GRAPPLE AR-BUNCHING, 123-6785 GRAPPLE AR-SORTING
AN ATTACHMENT
i00829707 SEBP2447
1576025 CROSSHEAD GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-3642 [1] LINK  
2. [4] CONE  
3. [4] RETAINER  
4. 158-3645 [4] SPRING AS  
5. 158-3646 [2] SPACER  
6. 125-0123 [2] PIN  
7. 125-0142 [2] NUT-ACORN  
8. 125-0141 [2] PLATE-LOCK  
9. 8T-6430 M [2] BOLT (M20X2.5X50-MM)  
10. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
11. 196-5490 [2] PIN  
  M   METRIC PART
 

#SEBP24470648
 

9U-0638: DRIVE GP-WINCH

9U-0638 DRIVE GP-WINCH
S/N 4LR1-UP
PART OF 159-0039 WINCH AR, 9U-2879 WINCH AR-SKIDDER
Type 1
AN ATTACHMENT
i00171716 SEBP2447
9U0638 DRIVE GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 2S-1654 [1] WASHER (3.5X44.5X6-MM THK)(6.0MM THK)  
3. 8K-8518 B [2] SHIM PACK (INCLUDES 20-SHIMS)(INCL 20 SHIMS)  
4. 7K-5448 [2] CUP-BEARING  
5. 7K-5449 [2] CONE-BEARING  
6. 5S-4408 [2] SEAL-LIP TYPE  
7. 106-4014 Y [1] SLIP JOINT GP  
8. 106-4015 Y [1] SHAFT GP-WINCH DRIVE  
9. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
10. 5V-2545 [4] STRAP  
11. 5D-8269 [8] BOLT-12 POINT HEAD (5/16-24X0.75-IN)(5/16-24X.75IN)  
12. 7X-0346 [6] BOLT (5/8-11X2-IN)  
13. 8T-4122 [6] WASHER-HARD (17X32X3.5-MM THK)  
14. 8R-7756 [1] YOKE  
15. 9U-4894 [1] SUPPORT AS  
16. 115-3201 [1] YOKE-SHAFT  
17. 6V-3940 M [5] BOLT (M8X1.25X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24470649
 

9U-0638: DRIVE GP-WINCH

9U-0638 DRIVE GP-WINCH
S/N 4LR1-UP
PART OF 159-0039 WINCH AR
Type 2
AN ATTACHMENT
i01162815 SEBP2447
9U0638 DRIVE GP-WINCH Parts scheme
  For full view, you need register

Parts for your 515 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 2S-1654 [1] WASHER (3.5X44.5X6-MM THK)  
3. 8K-8518 B [2] SHIM PACK (INCLUDES 20-SHIMS)  
4. 7K-5448 [2] CUP-BEARING  
5. 7K-5449 [2] CONE-BEARING  
6. 5S-4408 [2] SEAL-LIP TYPE  
7. 106-4014 Y [1] SLIP JOINT GP  
8. 160-5491 C [1] SHAFT GP-WINCH DRIVE  
9. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
10. 5V-2545 [4] STRAP  
11. 5D-8269 [8] BOLT-12 POINT HEAD (5/16-24X0.75-IN)  
12. 7X-0346 [6] BOLT (5/8-11X2-IN)  
13. 8T-4122 [6] WASHER-HARD (17X32X3.5-MM THK)  
14. 8R-7756 [1] YOKE  
15. 9U-4894 [1] SUPPORT AS  
16. 115-3201 [1] YOKE-SHAFT  
17. 6V-3940 M [5] BOLT (M8X1.25X25-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 515 :

CLUTCH GP-WINCH
162-0121 CLUTCH GP-WINCH
CLUTCH GP-WINCH
161-6437 CLUTCH GP-WINCH
CLUTCH & GEAR GP-WINCH
161-6405 CLUTCH & GEAR GP-WINCH
CASE GP-WINCH
193-7417 CASE GP-WINCH
CASE GP-WINCH
161-6411 CASE GP-WINCH
CASE GP-WINCH
161-6411 CASE GP-WINCH
BRAKE GP-WINCH
166-2910 BRAKE GP-WINCH
BRAKE GP-WINCH
161-6407 BRAKE GP-WINCH
CONTROL GP-WINCH
118-5394 CONTROL GP-WINCH
CONTROL GP-WINCH
159-2815 CONTROL GP-WINCH
CONTROL GP-WINCH
159-2815 CONTROL GP-WINCH
CONTROL GP-WINCH
159-2815 CONTROL GP-WINCH
CONTROL GP-WINCH HYDRAULIC
172-0314 CONTROL GP-WINCH HYDRAULIC
CROSSHEAD GP-GRAPPLE
126-0878 CROSSHEAD GP-GRAPPLE
CROSSHEAD GP-GRAPPLE
157-6025 CROSSHEAD GP-GRAPPLE
DRIVE GP-WINCH
9U-0638 DRIVE GP-WINCH

Truck sale:

Caterpillar 35156B, Construction
235,000 
Caterpillar 35156B, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR 515 1996
 
CATERPILLAR 515 1996
- FORESTRY - SKIDDER
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CAT 515
 
CAT 515

Henderson Auctions
Livingston, Louisiana
CAT 515
 
CAT 515

Henderson Auctions
Livingston, Louisiana
 
 
CAT 515

Henderson Auctions
Livingston, Louisiana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.