AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

101-0336 CRANKSHAFT GP S/N 6PN1-619 3508B GEN SET ENGINE


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

GEN SET ENGINE 3508B GEN SET ENGINE 6PN
 3508B Generator Set Engine 6PN00001-UP SEBP2448 3508B 6PN   (1994)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
101-0336 CRANKSHAFT GP
CRANKSHAFT GP
101-0336 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
 

#SEBP24480030
 

101-0336: CRANKSHAFT GP

101-0336 CRANKSHAFT GP
S/N 6PN1-619
i00094514 SEBP2448
1010336 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-7625 [1] CRANKSHAFT AS  
2. 128-4845 [18] BOLT AS  
3. 7N-2003 [12] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 [2] PLATE-THRUST  
6. 105-0253 [5] BEARING-MAIN (STANDARD)  
  105-0254 A [5] BEARING-MAIN (0.63-MM US)  
  105-0255 A [5] BEARING-MAIN (1.27-MM US)  
  105-0256 A [5] BEARING-MAIN (0.63-MM OS)  
  105-0257 A [5] BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24480031
 

101-0336: CRANKSHAFT GP

101-0336 CRANKSHAFT GP
S/N 6PN620-UP
i01320494 SEBP2448
1010336 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-7625 [1] CRANKSHAFT AS  
2. 128-4845 [18] BOLT AS  
3. 7N-2003 [12] DOWEL  
4. 2W-2288 [8] PLUG  
5. 7C-6209 J [2] PLATE-THRUST  
6. 149-6031 CJ [5] BEARING AS-MAIN (STANDARD)  
  149-6032 ABC BEARING-MAIN (0.63-MM US)  
  149-6033 ABC BEARING-MAIN (1.27-MM US)  
  149-6034 ABC BEARING-MAIN (0.63-MM OS)  
  149-6035 ABC BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
   
    AVAILABLE REPAIR KIT(S):
  196-9527 J KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
    (INCLUDES THRUST PLATES & MAIN BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24480032
 

101-1171: CYLINDER BLOCK AS

101-1171 CYLINDER BLOCK AS
PART OF 101-0827, 237-7957 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-3503@@@@@
i00090837 SEBP2448
1011171 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8249 [20] WASHER-HARD (24X41.5X4-MM THK)  
2. 7X-7925 [20] BOLT (7/8-14X11-IN)  
3. 223-1696 [5] CAP-CRANKSHAFT BEARING  
4. 4W-4813 [2] PLUG  
5. 8T-2929 [2] SEAL-O-RING  
6. 211-7826 [8] LINER-CYLINDER BLOCK  
7. 7N-2046 [24] SEAL-O-RING  
8. 8N-4707 [8] BAND-FILLER  
9. 8T-2928 [2] SEAL-O-RING  
 

#SEBP24480033
 

106-2778: CYLINDER BLOCK AS

106-2778 CYLINDER BLOCK AS
S/N 6PN1-1169
PART OF 115-3503 CYLINDER BLOCK GP
i00094525 SEBP2448
1062778 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [20] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [20] BOLT (7/8-14X11-IN)  
4. 223-1696 [5] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [2] PLUG  
6. 8T-2929 [2] SEAL-O-RING  
7. 8T-2928 [2] SEAL-O-RING  
 

#SEBP24480034
 

350-1391: CYLINDER BLOCK AS

350-1391 CYLINDER BLOCK AS
S/N 6PN610-UP
PART OF 353-3969 CYLINDER BLOCK GP
i03910026 SEBP2448
3501391 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-1696 [5] CAP-CRANKSHAFT BEARING  
2. 8T-2929 [2] SEAL-O-RING  
3. 4W-4813 [2] PLUG  
4. 5P-8249 [20] WASHER-HARD (24X41.5X4-MM THK)  
5. 7X-7925 [20] BOLT (7/8-14X11-IN)  
6. 8T-2928 [2] SEAL-O-RING  
 

#SEBP24480035
 

525-1804: CYLINDER BLOCK AS

525-1804 CYLINDER BLOCK AS
S/N 6PN610-UP
PART OF 350-1409 CYLINDER BLOCK GP
i07171724 SEBP2448
5251804 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-1696 [5] CAP-CRANKSHAFT BEARING  
2. 8T-2929 [2] SEAL-O-RING  
3. 4W-4813 [2] PLUG  
4. 5P-8249 [20] WASHER-HARD (24X41.5X4-MM THK)  
5. 7X-7925 [20] BOLT (7/8-14X11-IN)  
6. 8T-2928 [2] SEAL-O-RING  
 

#SEBP24480036
 

101-0827: CYLINDER BLOCK GP

101-0827 CYLINDER BLOCK GP
S/N 6PN1-609
i00094515 SEBP2448
1010827 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1171 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
3. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 B [1] PLUG-PIPE (3/4-14-THD)  
6. 9S-4191 [6] PLUG (9/16-18-THD)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 116-3253 [8] JET AS-PISTON COOLING (FOR USE WITH 2-PC PISTON ONLY)  
14. 0T-0102 [8] BOLT (3/8-16X0.625-IN)  
15. 101-1198 [10] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [16] PLUG-PIPE (1/4-18-THD)  
18. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
19. 8T-0099 [16] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [8] DOWEL  
22. 5P-0840 [16] SEAL-O-RING  
23. 144-5692 [8] GASKET-PLATE  
24. 110-6994 [8] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [1] SEAL-O-RING  
27. 1B-2790 [8] BOLT (5/16-18X1.375-IN)  
28. 7C-3722 [8] RETAINER AS (FOR USE WITH 2-PC PISTON ONLY)  
    (EACH INCLUDES)
  6V-3537 [1] DOWEL  
29. 8N-8056 [1] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 4W-4813 [1] PLUG  
32. 8T-2929 [1] SEAL-O-RING  
33. 8T-2928 [1] SEAL-O-RING  
34. 033-6042 [6] SEAL-O-RING  
35. 8N-8056 B [1] COVER  
36. 1A-2029 B [1] BOLT (3/8-16X1.125-IN)  
37. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
39. 5P-8245 B [1] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 0S-1595 B [1] BOLT (1/2-13X1.25-IN)  
41. 5P-8210 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP24480037
 

101-0827: CYLINDER BLOCK GP

101-0827 CYLINDER BLOCK GP
S/N 6PN610-838
i01290253 SEBP2448
1010827 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1171 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
3. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 B [1] PLUG-PIPE (3/4-14-THD)  
6. 9S-4191 [6] PLUG (9/16-18-THD)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 116-3253 [8] JET AS-PISTON COOLING (FOR USE WITH 2-PC PISTON ONLY)  
14. 0T-0102 [8] BOLT (3/8-16X0.625-IN)  
15. 101-1198 [10] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 BC [17] PLUG-PIPE (1/4-18-THD)  
18. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
19. 8T-0099 [16] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 197-7008 [8] DOWEL  
22. 5P-0840 [16] SEAL-O-RING  
23. 144-5692 [8] GASKET-PLATE  
24. 110-6994 [8] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [1] SEAL-O-RING  
27. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
28. 8N-8056 [1] COVER  
29. 6V-3348 [8] SEAL-O-RING  
30. 7C-3722 [8] RETAINER AS (FOR USE WITH 2-PC PISTON ONLY)  
    (EACH INCLUDES)
  6V-3537 [1] DOWEL  
31. 1B-2790 [8] BOLT (5/16-18X1.375-IN)  
32. 153-4906 [6] SEAL-O-RING  
33. 8N-8056 B [1] COVER  
34. 1A-2029 B [1] BOLT (3/8-16X1.125-IN)  
35. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 5P-8245 B [1] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 0S-1595 B [1] BOLT (1/2-13X1.25-IN)  
38. 5P-8210 B [1] SEAL-O-RING  
39. 8T-6763 B [1] PLUG-PIPE (1/4-18-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24480038
 

115-3503: CYLINDER BLOCK GP

115-3503 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR 101-1171 CYLINDER BLOCK AS
i00091150 SEBP2448
1153503 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [6] PLUG (9/16-18-THD)  
2. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
3. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
4. 8T-6763 [18] PLUG-PIPE (1/4-18-THD)  
5. 2W-2940 [8] PLUG  
6. 6V-3348 [8] SEAL-O-RING  
7. 7N-5641 [2] PLUG-MANIFOLD  
8. 5F-9657 [4] SEAL-O-RING  
9. 033-6042 [6] SEAL-O-RING  
10. 106-2778 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24480039
 

237-7957: CYLINDER BLOCK GP

237-7957 CYLINDER BLOCK GP
S/N 6PN1-1169
i01933174 SEBP2448
2377957 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3508B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1171 Y [1] CYLINDER BLOCK AS  
3. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 B [1] PLUG-PIPE (3/4-14-THD)  
6. 9S-4191 [6] PLUG (9/16-18-THD)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
15. 101-1198 [10] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [17] PLUG-PIPE (1/4-18-THD)  
18. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
19. 8T-0099 [16] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 197-7008 [8] DOWEL  
22. 5P-0840 [16] SEAL-O-RING  
23. 144-5692 [8] GASKET-PLATE  
24. 110-6994 [8] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [1] SEAL-O-RING  
27. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
29. 8N-8056 [1] COVER  
30. 6V-3348 [8] SEAL-O-RING  
34. 153-4906 [6] SEAL-O-RING  
36. 8N-8056 B [1] COVER  
37. 1A-2029 B [1] BOLT (3/8-16X1.125-IN)  
38. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 5P-8245 B [1] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 0S-1595 B [1] BOLT (1/2-13X1.25-IN)  
41. 5P-8210 B [1] SEAL-O-RING  
42. 8T-6763 B [1] PLUG-PIPE (1/4-18-THD)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2013/08/21
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/08/14
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500 and 3500B Engines
Special Instruction
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Crankshaft Seal Installation Procedure Using the 484-7863 Tool As On Certain 3500 and G3500 Engines{0701, 1160, 1161}
Crankshaft Seal Installation Procedure Using the 484-7863 Tool As On Certain 3500 and G3500 Engines{0701, 1160, 1161}
Service Letter-NACD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231}
Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
3500B Engines
Connecting Rod and Main Bearing Journals
3500B Engines
Crankshaft
3500B Engines
Service Letter-China
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Systems Operation
Crankshaft
3500B Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
Service Letter-APD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500B Engines
Main Bearings
3500B Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B Engines
Disassembly and Assembly
Bearing Clearance - Check
3500B Engines
Crankshaft Main Bearings - Remove
3500B Engines
Crankshaft Main Bearings - Install
3500B Engines
Crankshaft - Remove
3500B Engines
Crankshaft - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Install
3500B Engines
Service Magazine
125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/07/23
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog 3508B :

COVER GP-VALVE MECHANISM
101-0831 COVER GP-VALVE MECHANISM
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-FRONT HOUSING
121-3326 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
107-0278 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
7E-6432 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
CRANKSHAFT GP
101-0336 CRANKSHAFT GP
CYLINDER BLOCK AS
101-1171 CYLINDER BLOCK AS
CYLINDER BLOCK AS
106-2778 CYLINDER BLOCK AS
CYLINDER BLOCK AS
350-1391 CYLINDER BLOCK AS
CYLINDER BLOCK AS
525-1804 CYLINDER BLOCK AS
CYLINDER BLOCK GP
101-0827 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-0827 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-3503 CYLINDER BLOCK GP

Truck sale:

Caterpillar 3508B
 
Caterpillar 3508B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3508B, Industrial engines, Construction
175,500 
Caterpillar 3508B, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.