BASIC ENGINE
AIR COMPRESSOR GPBELT TIGHTENER GP
CAMSHAFT GP
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
BASIC ENGINE
AIR COMPRESSOR GP
#SEBP24600030
4P-3957: AIR COMPRESSOR GP
4P-3957 AIR COMPRESSOR GP
13.2 CFM AT 1250RPM. TU-FLO 550
13.2 CFM AT 1250RPM. TU-FLO 550
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 135-9819 | [1] | SEAL-INTEGRAL | |
| 2. | 4P-5106 | [1] | BRACKET | |
| 3. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 4. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 6V-5696 M | [2] | BOLT (M12X1.75X80-MM) | |
| 6. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 7C-3179 | [1] | GEAR (50-TEETH) | |
| 8. | 4P-3956 Y | [1] | AIR COMPRESSOR GP | |
| 9. | 090-7055 I | [1] | HOSE AS | |
| 10. | 5P-4479 | [1] | ELBOW (FLARED-LONG) | |
| 11. | 6B-6682 | [1] | NUT-FULL (3/4-16-THD) | |
| 12. | 7X-0521 | [1] | WASHER-HARD (20X36.5X5-MM THK) | |
| 13. | 030-7946 | [1] | ELBOW | |
| 14. | 3J-7354 | [1] | SEAL-O-RING | |
| 15. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 16. | 6D-3479 | [1] | CLIP (LOOP) | |
| 17. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24600031
124-7786: BELT TENSIONER GP
124-7786 BELT TENSIONER GP
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-7387 | [1] | BRACKET-MOUNTING | |
| 2. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 6V-5219 M | [3] | BOLT (M8X1.25X40-MM) | |
| 4. | 123-1719 | [1] | SUPPORT-COMPRESSOR | |
| 5. | 8C-5748 M | [1] | BOLT (M8X1.25X55-MM) | |
| 6. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 7. | 7E-3443 | [1] | BUSHING-TERMINAL | |
| 8. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 9. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 10. | 217-8938 | [1] | BELT TENSIONER | |
| 11. | 8T-0643 M | [1] | BOLT (M10X1.5X80-MM) | |
| 12. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 14. | 7W-3872 | [2] | SLEEVE | |
| 15. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 16. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 17. | 175-3225 | [1] | BRACKET-PULLEY | |
| 18. | 175-3223 Y | [1] | PULLEY GP-IDLER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24600032
100-4966: CAMSHAFT GP
100-4966 CAMSHAFT GP
For full view, you need register
#SEBP24600033
113-1134: COVER GP-CYLINDER BLOCK
113-1134 COVER GP-CYLINDER BLOCK
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-3871 | [3] | COVER-SIDE | |
| 2. | 4Y-9652 | [3] | GASKET | |
| 3. | 6V-2317 M | [6] | BOLT (M8X1.25X30-MM) | |
| 4. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 5. | 110-7618 | [4] | BOLT AS | |
| (EACH INCLUDES) | ||||
| 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 6. | 2W-6544 | [1] | COVER | |
| 7. | 7W-3872 | [6] | SLEEVE (LOCATION X) | |
| 8. | 4F-9653 | [1] | SEAL-O-RING | |
| 9. | 4F-9029 | [1] | SEAL | |
| 10. | 7E-7515 | [1] | COVER | |
| 11. | 8T-1159 M | [2] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 12. | 113-6280 | [1] | MANIFOLD-CYLINDER BLOCK | |
| 13. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 1U-8846 B | SEALANT-GASKET (2ML) | ||
| 15. | 9M-1974 | [23] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 6V-5217 M | [10] | BOLT (M8X1.25X20-MM) | |
| 17. | 3V-2431 | [2] | WASHER (10.2X16X2-MM THK) | |
| 18. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 19. | 9X-2099 M | [6] | STUD (M8X1.25X52.75-MM)(LOCATION Z) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP24600034
4P-5107: COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
S/N 9YN1-4734
S/N 9YN1-4734
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2317 M | [12] | BOLT (M8X1.25X30-MM) | |
| 2. | 7C-0358 | [2] | GASKET | |
| 3. | 7W-3872 | [6] | SLEEVE (LOCATION X) | |
| 4. | 7W-3871 | [1] | COVER-SIDE | |
| 5. | 4Y-9652 | [3] | GASKET | |
| 6. | 7W-9395 | [2] | COVER-SIDE | |
| 7. | 110-7618 | [4] | BOLT AS | |
| 8. | 2W-6544 | [1] | COVER | |
| 1U-8846 B | SEALANT-GASKET | |||
| 9. | 7E-7515 | [1] | COVER | |
| 10. | 8T-1159 M | [2] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 3V-2431 | [2] | WASHER (10.2X16X2-MM THK)(16MM OD) | ||
| 11. | 4F-9653 | [1] | SEAL-O-RING | |
| 12. | 8T-6765 C | [1] | PLUG-PIPE (1/4-18-THD) | |
| 13. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 14. | 4F-9029 | [1] | SEAL | |
| 15. | 113-6280 C | [1] | MANIFOLD-CYLINDER BLOCK | |
| 16. | 6V-5219 CM | [2] | BOLT (M8X1.25X40-MM) | |
| 17. | 6V-5217 M | [11] | BOLT (M8X1.25X20-MM) | |
| 18. | 9M-1974 | [27] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 6V-3940 M | [4] | BOLT (M8X1.25X25-MM) | |
| 20. | 7C-2177 | [2] | COVER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP24600035
7W-9847: COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
FOR USE WITH @@@@@ 4P-0595@@@@@, @@@@@ 4P-3957@@@@@
FOR USE WITH @@@@@ 4P-0595@@@@@, @@@@@ 4P-3957@@@@@
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP24600036
7E-9915: COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
FOR USE WITH TOP FRONT VALVE COVER OIL FILL
FOR USE WITH TOP FRONT VALVE COVER OIL FILL
For full view, you need register
#SEBP24600037
9Y-9507: COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
S/N 9YN1-4734
TALL WITH THREE EXTERNAL BOSSES
Type 2
S/N 9YN1-4734
TALL WITH THREE EXTERNAL BOSSES
Type 2
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP24600038
9Y-9507: COVER GP-VALVE MECHANISM
9Y-9507 COVER GP-VALVE MECHANISM
S/N 9YN1-4734
TALL WITH THREE EXTERNAL BOSSES
Type 1
S/N 9YN1-4734
TALL WITH THREE EXTERNAL BOSSES
Type 1
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP24600039
4W-2197: CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 105-1725 | [1] | CRANKSHAFT AS | |
| 2. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 3. | 2W-8147 | [1] | GEAR (50-TEETH) | |
| 4. | 107-7602 | [1] | BEARING-THRUST | |
| 7C-6969 AB | BEARING-THRUST (0.5-MM OS) | |||
| 7C-6970 AB | BEARING-THRUST (0.5-MM OS, 0.5-MM US) | |||
| 7C-6966 AB | BEARING-THRUST (0.25-MM US) | |||
| 7C-6967 AB | BEARING-THRUST (0.5-MM US) | |||
| 5. | 101-1530 | [3] | BEARING-MAIN | |
| 7C-6974 AB | BEARING-MAIN (0.5-MM OS) | |||
| 7C-6975 AB | BEARING-MAIN (0.5-MM OS, 0.5-MM US) | |||
| 7C-6971 AB | BEARING-MAIN (0.25-MM US) | |||
| 7C-6972 AB | BEARING-MAIN (0.5-MM US) | |||
| 6. | 107-7708 | [3] | BEARING-MAIN | |
| 7C-6964 AB | BEARING-MAIN (0.5-MM OS) | |||
| 7C-6965 AB | BEARING-MAIN (0.5-MM OS, 0.5-MM US) | |||
| 7C-6961 AB | BEARING-MAIN (0.25-MM US) | |||
| 7C-6962 AB | BEARING-MAIN (0.5-MM US) | |||
| 7C-7980 AF | [1] | SLEEVE-OIL SEAL | ||
| (USED ONLY TO REPAIR THE REAR SEAL SURFACE OF THE CRANKSHAFT) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 196-9518 | KIT-BASIC ENGINE REPAIR (MAIN BEARING)(CRANKSHAFT) | |||
| (INCLUDES A COMPLETE SET OF STANDARD MAIN & THRUST BEARINGS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
BASIC ENGINE
AIR COMPRESSOR GP
General Service Information
Truck Engine News
Engine News
Operation and Maintenance Manual
Special Instruction
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Letter-NACD
Product Support Program For Inspection And Tightening Of The Compressor Nut On Certain 3116 And 3126 Engines
Product Support Program For Inspection And Tightening Of The Compressor Nut On Certain 3116 And 3126 Engines
Product Support Program For Inspection And Tightening Of The Compressor Nut On Certain 3116 And 3126 Engines
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Disassembly and Assembly
Service Magazine
