AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-6276 GOVERNOR GP-UNIT INJECTOR PART OF 100-6275 GOVERNOR GP-UNIT INJECTOR Type 1 3116 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
FILTER GP-FUEL

TRUCK ENGINE 3116 TRUCK ENGINE 9YN
 3116 Truck Engine 9YN00001-UP SEBP2460 3116 9YN   (1995)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-6274 GOVERNOR GP-UNIT INJECTOR
100-6275 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6276 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6276 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
104-8681 GOVERNOR GP-UNIT INJECTOR
 

#SEBP24600140
 

100-6276: GOVERNOR GP-UNIT INJECTOR

100-6276 GOVERNOR GP-UNIT INJECTOR
PART OF 100-6275 GOVERNOR GP-UNIT INJECTOR
Type 1
i00461426 SEBP2460
1006276 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 101-3735 [1] CAM AS  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 107-7867 [1] SPRING-OIL SIDE  
7. 4P-5605 [4] SHIM (0.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600141
 

100-6276: GOVERNOR GP-UNIT INJECTOR

100-6276 GOVERNOR GP-UNIT INJECTOR
PART OF 100-6275 GOVERNOR GP-UNIT INJECTOR
Type 2
i00461427 SEBP2460
1006276 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 101-3735 [1] CAM AS  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 107-7867 [1] SPRING-OIL SIDE  
7. 4P-5605 [4] SHIM (0.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600142
 

100-8271: GOVERNOR GP-UNIT INJECTOR

100-8271 GOVERNOR GP-UNIT INJECTOR
PART OF 100-6258, 100-6274, 100-6276, 104-8681 GOVERNOR GP-UNIT INJECTOR
i00122928 SEBP2460
1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme 1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8272 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 8T-0269 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [1] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING  
31. 100-5740 [1] SPRING-TORSION  
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
35. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
39. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (0.25-MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] PLATE  
51. 7W-1440 B [8] SHIM (0.12-MM THK)  
52. 115-1192 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
57. 7C-5150 [1] PIN  
58. 117-9099 C [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 125-8158 C [1] SLEEVE-RACK CONTROL  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 114-2897 [1] COVER-FUEL RATIO CONTROL  
71. 7N-2171 C [1] RING-RETAINING  
72. 7W-5324 [1] BEARING  
73. 115-2553 C [1] VALVE-GOVERNOR SERVO  
74. 100-4390 [1] SPRING  
75. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
76. 100-4395 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 114-2899 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT (M6X0.5-THD)  
87. 2M-9780 [1] SEAL-O-RING  
88. 105-4916 M [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600143
 

104-8681: GOVERNOR GP-UNIT INJECTOR

104-8681 GOVERNOR GP-UNIT INJECTOR
PART OF 105-1689 GOVERNOR GP-UNIT INJECTOR
Type 1
i00477067 SEBP2460
1048681 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 107-7872 [1] CAM AS  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 103-1222 [1] SPRING-FUEL RATIO CONTROL  
7. 4P-5605 B [4] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600144
 

104-8681: GOVERNOR GP-UNIT INJECTOR

104-8681 GOVERNOR GP-UNIT INJECTOR
PART OF 105-1689 GOVERNOR GP-UNIT INJECTOR
Type 2
i00477069 SEBP2460
1048681 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 103-1222 [1] SPRING-FUEL RATIO CONTROL  
7. 4P-5605 [4] SHIM (0.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600145
 

105-1689: GOVERNOR GP-UNIT INJECTOR

105-1689 GOVERNOR GP-UNIT INJECTOR
i00478199 SEBP2460
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  104-8681 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600146
 

130-7326: GOVERNOR GP-UNIT INJECTOR

130-7326 GOVERNOR GP-UNIT INJECTOR
PART OF 100-6258, 100-6274, 100-6276, 104-8681 GOVERNOR GP-UNIT INJECTOR
i00123867 SEBP2460
1307326 GOVERNOR GP-UNIT INJECTOR Parts scheme 1307326 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 8T-0269 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING  
31. 100-5740 [1] SPRING-TORSION  
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
35. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
39. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (0.25-MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] PLATE  
51. 7W-1440 B [8] SHIM (0.12-MM THK)  
52. 115-1192 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
57. 7C-5150 [1] PIN  
58. 117-9099 [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 125-8158 [1] SLEEVE-RACK CONTROL  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 114-2897 [1] COVER-FUEL RATIO CONTROL  
71. 7N-2171 [1] RING-RETAINING  
72. 7W-5324 [1] BEARING  
73. 115-2553 [1] VALVE-GOVERNOR SERVO  
74. 100-4390 [1] SPRING  
75. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
76. 129-4284 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 114-2899 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT (M6X0.5-THD)  
87. 2M-9780 [2] SEAL-O-RING  
88. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600147
 

107-6824: LINES GP-FUEL

107-6824 LINES GP-FUEL
i00473065 SEBP2460
1076824 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8156 [2] ELBOW  
2. 3J-1907 [2] SEAL-O-RING  
3. 107-7595 [1] TUBE AS  
4. 107-7596 [1] TUBE AS  
5. 5C-7261 M [2] NUT (M8X1.25-THD)  
6. 107-7599 [2] STRAP AS  
7. 6V-8214 M [1] BOLT (M6X1X20-MM)  
8. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
9. 7E-2707 [2] CLIP  
10. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP24600148
 

119-9284: LINES GP-FUEL FILTER

119-9284 LINES GP-FUEL FILTER
S/N 9YN1-4581
FOR USE WITH @@@@@ 4N-3287@@@@@
i00522667 SEBP2460
1199284 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
2. 6V-8724 [1] ELBOW  
3. 3J-1907 [5] SEAL-O-RING  
4. 8W-5425 I [2] HOSE AS  
5. 6V-8397 [6] SEAL-O-RING  
6. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
7. 5F-7054 [1] SEAL-O-RING  
8. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
9. 200-4504 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)  
11. 8T-0151 [1] ADAPTER  
12. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
13. 3S-2093 [1] STRAP-CABLE  
14. 116-1859 [1] ELBOW  
15. 8T-5043 [1] ADAPTER  
16. 1J-9671 [1] SEAL-O-RING  
17. 112-6521 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
18. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
19. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
20. 5P-7970 M [2] NUT (M8X1.25-THD)  
21. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
22. 6N-4414 [1] COVER-FILTER BASE  
23. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
25. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 5P-7813 [1] SEAL-O-RING  
27. 3N-3252 [1] SPRING  
28. 6V-9850 [1] ELBOW  
29. 8M-2773 [2] CLIP (LOOP)  
30. 4P-2413 [1] PLATE  
31. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
32. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 5P-1442 E HOSE (140 CM)  
34. 9M-8406 [1] CLIP (LOOP)  
35. 6V-8774 [1] TEE  
36. 6V-5219 M [3] BOLT (M8X1.25X40-MM)  
37. 8L-5449 [3] SPACER (0.375X0.75X0.69-IN THK)  
38. 6K-8178 [2] CLIP (LOOP)  
39. 5C-7261 M [1] NUT (M8X1.25-THD)  
40. 115-4184 [1] TEE-O-RING PORT  
41. 5P-4924 [1] ELBOW  
42. 5P-4961 [2] CLAMP-HOSE  
43. 4P-5918 [1] CLIP  
44. 039-4966 [1] ADAPTER  
45. 068-9526 [1] CAP-TUBE  
46. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24600149
 

127-4542: LINES GP-FUEL FILTER

127-4542 LINES GP-FUEL FILTER
S/N 9YN1093-UP
i00516989 SEBP2460
1274542 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
2. 6V-8724 [1] ELBOW  
3. 3J-1907 [2] SEAL-O-RING  
4. 8W-5425 I [1] HOSE AS  
5. 6V-8397 [5] SEAL-O-RING  
6. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
7. 5F-7054 [1] SEAL-O-RING  
8. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
9. 7E-5190 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)  
11. 8T-0151 [1] ADAPTER  
12. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
13. 7X-7729 [2] WASHER (11X25X3-MM THK)  
14. 2T-2305 [1] ELBOW  
15. 8T-5043 [1] ADAPTER  
16. 1J-9671 [1] SEAL-O-RING  
17. 8W-5426 I [1] HOSE AS  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
20. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 5P-7970 M [2] NUT (M8X1.25-THD)  
22. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
23. 6N-4414 B [1] COVER-FILTER BASE  
24. 1B-2790 B [1] BOLT (5/16-18X1.375-IN)  
25. 7B-2742 B [1] BOLT (1/4-20X1.25-IN)  
26. 5P-0537 B [1] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 5P-7813 [1] SEAL-O-RING  
28. 3N-3252 [1] SPRING  
29. 6V-9850 [1] ELBOW  
30. 002-9372 [2] CLIP  
31. 4P-2413 [1] PLATE  
32. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
33. 4N-8897 [1] BASE AS-FUEL FILTER  
34. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Australia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CFEL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CSARL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Specifications
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Asia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines

Caterpillar Parts SIS Catalog 3116 :

100-6275 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6274 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6274 GOVERNOR GP-UNIT INJECTOR
100-6273 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6258 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6258 GOVERNOR GP-UNIT INJECTOR
100-6257 GOVERNOR GP-UNIT INJECTOR
FITTING GP-FUEL LINES
129-4861 FITTING GP-FUEL LINES
GOVERNOR GP-UNIT INJECTOR
100-6276 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
104-8681 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
104-8681 GOVERNOR GP-UNIT INJECTOR
105-1689 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7326 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL
107-6824 LINES GP-FUEL
LINES GP-FUEL FILTER
119-9284 LINES GP-FUEL FILTER

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.