COOLING SYSTEM
PUMP GP-WATERRADIATOR GP
COOLING SYSTEM
PUMP GP-WATER
#SEBP24660080
134-1487: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-1068 | [1] | IMPELLER-PUMP | |
| 2. | 131-3815 | [1] | SEAL GP (WATER PUMP) | |
| 3. | 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 4. | 0S-1591 J | [1] | BOLT (3/8-16X1.5-IN) | |
| 5. | 135-4928 J | [1] | SHAFT-WATER PUMP | |
| 6. | 8C-3100 | [1] | SEAL-LIP TYPE | |
| 7. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 8. | 4N-1948 | [1] | GEAR (43-TEETH) | |
| 9. | 1A-1135 J | [1] | BOLT (5/8-11X2-IN) | |
| 10. | 108-7930 J | [1] | BEARING AS-ROLLER | |
| 11. | 105-3785 J | [1] | RETAINER | |
| 12. | 5S-0581 J | [1] | WASHER-HARD (17X38X8-MM THK) | |
| 13. | 105-3790 | [1] | HOUSING AS-PUMP | |
| 14. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 15. | 4M-1336 | [1] | FERRULE | |
| 16. | 5H-8985 | [1] | PIN-SPRING | |
| 17. | 111-2721 J | [1] | PLUG-FELT (WATER PUMP) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 127-9885 AJ | [1] | KIT-WATER PUMP | ||
| A | NOT PART OF THIS GROUP | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP24660081
137-1339: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1344 | [1] | HOUSING AS-PUMP | |
| 4M-1336 | [1] | FERRULE | ||
| 5H-8985 | [1] | PIN-SPRING | ||
| 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | ||
| 2. | 111-2721 J | [1] | PLUG-FELT (WATER PUMP) | |
| 3. | 128-0317 J | [1] | SEAL GP (WATER PUMP) | |
| 4. | 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 5. | 0S-1591 J | [1] | BOLT (3/8-16X1.5-IN) | |
| 6. | 108-7930 J | [1] | BEARING AS-ROLLER | |
| 7. | 153-1256 J | [1] | SEAL-LIP TYPE | |
| 8. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 9. | 4N-1948 | [1] | GEAR (43-TEETH) | |
| 10. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 11. | 135-4928 J | [1] | SHAFT-WATER PUMP | |
| 12. | 136-1107 J | [1] | RETAINER | |
| 13. | 5S-0581 J | [1] | WASHER-HARD (17X38X8-MM THK) | |
| 14. | 137-1970 | [1] | IMPELLER-PUMP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 377-7037 AJ | [1] | KIT-WATER PUMP | ||
| A | NOT PART OF THIS GROUP | |||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP24660082
352-0200: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1344 | [1] | HOUSING AS-PUMP | |
| 4M-1336 | [1] | FERRULE | ||
| 5H-8985 | [1] | PIN-SPRING | ||
| 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | ||
| 111-2721 | [1] | PLUG-FELT | ||
| 2. | 137-1970 | [1] | IMPELLER-PUMP | |
| 3. | 349-2654 | [1] | SEAL-WATER PUMP | |
| 4. | 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 5. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 6. | 108-7930 | [1] | BEARING AS-ROLLER | |
| 7. | 153-1256 | [1] | SEAL-LIP TYPE | |
| 8. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 9. | 4N-1948 | [1] | GEAR (43-TEETH) | |
| 10. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 11. | 135-4928 | [1] | SHAFT-WATER PUMP | |
| 12. | 136-1107 | [1] | RETAINER | |
| 13. | 5S-0581 | [1] | WASHER-HARD (17X38X8-MM THK) |
#SEBP24660083
4N-5837: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 105-0196 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 CJ | [1] | SEAL-O-RING | |
| 3. | 101-2749 C | [1] | ADAPTER | |
| 4. | 9X-7371 CJ | [1] | SEAL-O-RING | |
| 5. | 112-1580 CJ | [1] | SEAL-O-RING | |
| 6. | 9S-8752 C | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| AVAILABLE GASKET KIT(S): | ||||
| 360-4174 J | [1] | KIT-WATER PUMP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24660084
4N-5837: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1487 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 J | [1] | SEAL-O-RING | |
| 3. | 101-2749 | [1] | ADAPTER | |
| 4. | 9X-7371 J | [1] | SEAL-O-RING | |
| 5. | 112-1580 J | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| AVAILABLE GASKET KIT(S): | ||||
| 360-4174 J | [1] | KIT-WATER PUMP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24660085
4N-5837: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1339 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 J | [1] | SEAL-O-RING | |
| 3. | 101-2749 | [1] | ADAPTER | |
| 4. | 9X-7371 J | [1] | SEAL-O-RING | |
| 5. | 112-1580 J | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| AVAILABLE GASKET KIT(S): | ||||
| 360-4174 J | [1] | KIT-WATER PUMP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24660086
4N-5837: PUMP GP-WATER
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 352-0200 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 | [1] | SEAL-O-RING | |
| 3. | 101-2749 | [1] | ADAPTER | |
| 4. | 9X-7371 | [1] | SEAL-O-RING | |
| 5. | 112-1580 | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24660087
190-5568: RADIATOR & MOUNTING GP
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS#SEBP24660088
128-1478: RADIATOR GP
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 128-1634 | [1] | TANK AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 125-6743 E | SEAL-RUBBER (127CM) | |||
| 2. | 4L-6454 | [14] | BOLT (3/8-16X1-IN) | |
| 4. | 175-7783 | [1] | CHANNEL AS | |
| 1F-0750 | [23] | NUT-WELD (3/8-16-THD) | ||
| 5. | 175-7784 | [1] | CHANNEL AS | |
| 1F-0750 | [23] | NUT-WELD (3/8-16-THD) | ||
| 6. | 6I-2431 | [11] | SEAL | |
| 7. | 124-6864 | [1] | PLATE AS | |
| 1F-0750 | [28] | NUT-WELD (3/8-16-THD) | ||
| 8. | 6I-2435 | [11] | SPACER (80X108X25-MM THK) | |
| 9. | 146-6204 | [11] | RETAINER | |
| 10. | 119-4774 | [11] | CORE AS-RADIATOR | |
| 11. | 137-4707 | [1] | PLATE | |
| 12. | 106-4572 | [10] | HOSE-RADIATOR | |
| 13. | 1P-4278 | [20] | CLAMP-HOSE | |
| 14. | 8T-2502 | [40] | BOLT (3/8-16X1.125-IN) | |
| 15. | 5P-1075 | [54] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 16. | 128-1633 | [1] | ANGLE AS | |
| 1F-0750 | [8] | NUT-WELD (3/8-16-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24660089
190-5581: RADIATOR GP
For full view, you need register
Parts for your 24H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-7431 | [1] | HOSE-RADIATOR (LOWER) | |
| 2. | 7N-1639 | [4] | CAP | |
| 3. | 7N-3864 | [2] | SUPPORT | |
| 4. | 7W-5532 | [2] | SHAFT | |
| 5. | 7W-5775 | [4] | STRIP | |
| 6. | 7W-7233 | [2] | MOUNT | |
| 7. | 8N-7257 | [4] | MOUNT AS | |
| 8. | 9Y-7769 | [4] | BAFFLE AS-FAN | |
| (EACH INCLUDES) | ||||
| 5B-9627 | [6] | WASHER (10.3X19X5-MM THK) | ||
| 9. | 128-1478 Y | [1] | RADIATOR GP | |
| 10. | 128-1562 | [1] | PLATE AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 11. | 128-1563 | [1] | PLATE AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 12. | 128-1567 | [1] | SHIELD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 13. | 128-1617 | [1] | SHIELD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 14. | 128-1618 | [1] | SHIELD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 15. | 128-1621 | [1] | SHIELD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 16. | 128-1630 | [1] | ANGLE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 17. | 208-6054 | [2] | CLAMP-T BOLT | |
| 18. | 4L-6454 | [46] | BOLT (3/8-16X1-IN) | |
| 19. | 5S-7379 | [14] | BOLT (3/8-16X0.875-IN) | |
| 20. | 7X-0350 | [6] | BOLT (5/8-11X3.5-IN) | |
| 21. | 8T-4122 | [12] | WASHER-HARD (17X32X3.5-MM THK) | |
| 22. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4896 | [60] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 25. | 8T-6871 | [6] | BOLT (5/8-11X2.5-IN) | |
| 26. | 8T-8920 | [8] | BOLT (1/2-13X3.25-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
