6I-3906 AIR COMPRESSOR GP S/N 6BR1010-UP PART OF 107-8087 AIR COMPRESSOR GP AN ATTACHMENT 3406E INDUSTRIAL ENGINE

6I-3906: AIR COMPRESSOR GP

6I-3906 AIR COMPRESSOR GP
S/N 6BR1010-UP
PART OF 107-8087 AIR COMPRESSOR GP
AN ATTACHMENT

Parts for your 3406E INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	164-7566 YC	[1]	AIR COMPRESSOR GP
2.	110-0004	[1]	SEAL
3.	6I-3907	[1]	ADAPTER-PILOT
4.	101-9640	[1]	GEAR (40-TEETH)
5.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
6.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
7.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
8.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
9.	8M-7065	[1]	GASKET (AIR INLET)
10.	7W-5499	[1]	ELBOW
11.	030-7949	[1]	ELBOW
12.	2N-1287	[1]	ELBOW-FLARED
13.	2N-3378	[2]	ELBOW-FLARED
14.	179-9981 I	[1]	HOSE AS
15.	114-4427	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

110-9528: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

110-9528 BASE GP-VALVE COVER & INJ HARN
S/N 6BR1-552
FOR ALL RATINGS

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-3127	[7]	BOLT (1/4-20X0.75-IN)
2.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
3.	5P-0537	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	7E-6508	[6]	CAP AS
5.	115-9445	[1]	HARNESS AS-WIRING (ELECTRONIC UNIT INJECTOR)
6.	100-5218	[3]	CLIP
7.	100-5219	[3]	CLIP
8.	6I-4438	[1]	BASE-VALVE MECHANISM COVER
9.	9L-8925	[15]	BOLT (5/16-18X1.25-IN)
10.	5P-5678 D		SEAL (3-M)
11.	123-3202	[3]	STRAP-CABLE
12.	6V-0128	[1]	SEAL-CONNECTOR
13.	8J-1256	[1]	CLIP (LOOP)
	3S-6252 ABF		SEALANT
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 6BR1-2533

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-3127	[6]	BOLT (1/4-20X0.75-IN)
2.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
3.	5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
5.	122-1486	[1]	HARNESS AS-WIRING (ELECTRONIC UNIT INJECTOR)
	8L-8413	[6]	STRAP-CABLE (WHITE)
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	100-5218	[3]	CLIP
7.	100-5219	[3]	CLIP
8.	177-4152	[1]	BASE-VALVE MECHANISM COVER
9.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
10.	5P-5678 D		SEAL (2.9-M)
11.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
12.	6V-0128	[1]	SEAL-CONNECTOR
13.	123-3202	[2]	STRAP-CABLE
	D		ORDER BY THE METER

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 6BR2534-UP

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
3.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
4.	425-6526 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC UNIT INJECTOR)
5.	123-3202	[6]	STRAP-CABLE
6.	272-0390 C	[1]	SEAL
7.	419-3614 C	[1]	BASE-VALVE COVER
8.	326-4512	[6]	MOUNTING-CABLE TIE (MARKED BY X)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

190-6562: BELT TENSIONER GP

BELT TENSIONER GP

190-6562 BELT TENSIONER GP
FOR USE WITH 68.5MM DIAMETER PULLEY
AN ATTACHMENT

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	164-4599	[1]	BELT-SERPENTINE
2.	217-8938	[1]	BELT TENSIONER
3.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
	M		METRIC PART

118-4914: BELT TIGHTENER GP

BELT TIGHTENER GP

118-4914 BELT TIGHTENER GP
FOR USE WITH FIXED CENTER DRIVES
AN ATTACHMENT

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-6821	[1]	COVER
2.	9N-0316	[1]	BRACKET-PULLEY
3.	3B-8485	[1]	ELBOW (BELT TIGHTENER)
4.	5S-2106	[1]	SEAL-LIP TYPE
5.	110-7753	[1]	SEAL-O-RING
6.	8H-9789	[2]	BALL BEARING
7.	2F-6262	[1]	WASHER
8.	0S-1590	[2]	BOLT (3/8-16X2-IN)
9.	4B-4550	[1]	FITTING-PRESSURE RELIEF (1/8-27 PTF)(BELT TIGHTENER)
10.	1W-6134	[1]	COVER
11.	9N-1012	[1]	SPACER-BEARING (1.438X1.75X1-IN THK)
12.	9N-0311	[1]	SPACER-BEARING
13.	3N-9583	[1]	PULLEY-TIGHTENER (4-GROOVE)
14.	1A-5964	[7]	BOLT (3/8-16X4.5-IN)
15.	0S-1594	[8]	BOLT (3/8-16X1-IN)
16.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	0L-1351	[2]	BOLT (3/8-16X0.875-IN)
18.	2D-8822	[1]	STUD-TAPERLOCK (5/8-11X2.36-IN)
19.	2S-7593	[1]	WASHER-HARD (17X35X5-MM THK)
20.	4K-0367	[1]	NUT-FULL (5/8-11-THD)
21.	034-9362	[1]	TUBE
22.	2D-4534	[1]	BOLT-SOCKET HEAD (3/8-16X1-IN)
23.	4N-4526	[1]	COVER
24.	2P-2720	[1]	GASKET
25.	5M-1932	[1]	STUD-TAPERLOCK (1/2-13X2.17-IN)
26.	2M-0849	[1]	WASHER-HARD (13.5X25.5X5-MM THK)
27.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
28.	8L-2655	[1]	PLUG-PIPE
29.	7W-5733	[1]	GASKET

185-9699: CAMSHAFT GP

CAMSHAFT GP

185-9699 CAMSHAFT GP
S/N 6BR1853-UP

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-9089	[1]	COVER
2.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
3.	332-7308	[1]	CAMSHAFT
4.	6V-1197	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

6I-1543: CAMSHAFT GP

CAMSHAFT GP

6I-1543 CAMSHAFT GP

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-9089	[1]	COVER
2.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
3.	187-9381	[1]	CAMSHAFT
4.	6V-1197	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

2W-4908: CLUTCH GP

CLUTCH GP

2W-4908 CLUTCH GP
PART OF 2W-4909 POWER TAKE-OFF GP
AN ATTACHMENT

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4810	[1]	LEVER AS-HAND
	0S-1587	[1]	BOLT (1/2-13X1.75-IN)
2.	6L-3969	[4]	PIN
	6L-3964	[8]	PIN-COTTER
3.	6L-3970	[4]	PIN
4.	3N-8427	[1]	CARRIER AS-BEARING
	9F-2247	[1]	PLUG-PIPE
5.	2W-4904	[2]	RING-SEAL
6.	5L-3495	[8]	LINK-LEVER
7.	2L-6010	[2]	PLUG-PIPE
8.	5L-1545	[2]	CUP-BEARING
	7L-6551	[2]	CONE-BEARING
9.	5L-3556 B	[1]	SHIM (0.0200-IN THK)
	5L-3557 B	[1]	SHIM (0.010-IN THK)
	5L-3558 B	[1]	SHIM (0.007-IN THK)
	5L-3559 B	[1]	SHIM (0.005-IN THK)
10.	5L-3613	[1]	RETAINER-BEARING
11.	0S-1594	[6]	BOLT (3/8-16X1-IN)
	5L-3560	[3]	PLATE-LOCK
12.	5L-3553	[1]	YOKE
13.	5L-3485	[1]	SHAFT-CLUTCH LEVER
	6L-5151	[2]	KEY-WOODRUFF
14.	0S-1591	[2]	BOLT (3/8-16X1.5-IN)
15.	3N-1462	[1]	PIN AS
16.	3N-1461	[1]	SPRING
17.	5L-3602	[1]	PLATE-PRESSURE
18.	4P-3020	[3]	PLATE-DRIVE
19.	3N-9175	[1]	RING-DRIVE
20.	4B-4773	[1]	LOCK
21.	4B-4764	[1]	NUT
22.	3N-9176	[1]	KEY
23.	3N-9178	[1]	PLATE-HUB & BACK
24.	5L-3603	[2]	PLATE AS-CENTER
25.	6L-4016	[4]	PIN
26.	6L-3961	[4]	PIN-COTTER
27.	5L-3493	[4]	LEVER
28.	5L-3492	[1]	YOKE-ADJUSTMENT
29.	5L-3496	[1]	SLEEVE-SLIDING
30.	0S-1625	[8]	BOLT (5/8-11X2.5-IN)
31.	5L-3487	[1]	COLLAR AS
31A.	5L-3561 B	[2]	SHIM (0.06-IN THK)
31B.	2L-6267	[2]	LOCKNUT (3/8-24-THD)
31C.	0L-1648	[2]	BOLT (3/8-24X2.5-IN)
32.	5B-2410	[1]	HOSE AS
33.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)(CLUTCH)
	9S-1354	[1]	NUT (5/8-18-THD)
	6F-0253	[1]	LOCKWASHER
34.	1L-6931	[2]	SCREW AS-MACHINE (1/4-20X0.5-IN)
35.	108-3561	[1]	PLATE-INSTRUCTION (POWER TAKE-OFF)
36.	5L-3617	[1]	SEAL-RUBBER
37.	3N-9179	[1]	HOUSING-CLUTCH
	8B-7121	[2]	FITTING-HYDRAULIC (CLUTCH)
38.	4B-9782	[1]	BALL
39.	3N-9180	[1]	SHAFT-CLUTCH
40.	5P-3499	[1]	BALL BEARING
	B		USE AS REQUIRED

4P-3073: CLUTCH GP

CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT

Parts for your 3406E INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4L-3527	[2]	PLATE-CLUTCH DRIVING
2.	5L-9652	[1]	HUB
3.	8B-7987	[1]	KEY-WOODRUFF
4.	5L-9653	[1]	NUT
	5L-9654	[1]	LOCK
5.	3H-9571	[1]	PLATE-CENTER
6.	5N-9317	[1]	RING-DRIVE
7.	7F-8897	[1]	PLATE
8.	3H-9572	[1]	RING-ADJUSTMENT
9.	3H-9574	[1]	SLEEVE
10.	4B-4754	[1]	SHAFT
	6L-5151	[2]	KEY-WOODRUFF
11.	4B-4792	[1]	YOKE AS
12.	0S-1591	[2]	BOLT (3/8-16X1.5-IN)
	3B-4506	[2]	LOCKWASHER
13.	1A-1460	[6]	BOLT (1/2-13X2-IN)
	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	5L-9655	[1]	RETAINER-BEARING
15.	9S-1354	[1]	NUT (5/8-18-THD)
	6F-0253	[1]	LOCKWASHER
16.	4B-4716	[1]	COLLAR AS-SLEEVE
17.	0L-0639	[2]	BOLT (3/8-24X2.25-IN)
	2L-6267	[2]	LOCKNUT (3/8-24-THD)
	4B-4758 B	[2]	SHIM (0.06-IN THK)
18.	0S-1617	[1]	BOLT (5/16-18X0.75-IN)
	3F-9556	[1]	LOCKWASHER
	5B-2407	[1]	LOCK
19.	5B-2410 E	[1]	HOSE AS (38.1-CM)
20.	4B-4721	[8]	LINK
	6L-3967	[8]	PIN
	3B-5301	[8]	PIN-COTTER
21.	6L-3972	[4]	PIN
	3B-4627	[4]	PIN-COTTER
	1L-4863	[8]	WASHER-SPRING
22.	4H-0002	[4]	LEVER
23.	108-3561	[1]	PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)
24.	3N-8125	[1]	PLATE AS-PRESSURE
25.	3N-8124	[1]	SPRING
	3N-8123	[1]	LOCK PIN
26.	8B-7121	[2]	FITTING-HYDRAULIC (CLUTCH)
27.	3N-4896	[1]	SHAFT-CLUTCH
28.	1S-7443	[4]	SCREW-MACHINE
	1H-3338	[4]	LOCKWASHER (EXTERNAL TOOTH)
29.	6B-3223	[2]	CUP-BEARING
30.	4B-7270	[2]	CONE-BEARING
31.	4B-4810	[1]	LEVER AS-HAND
32.	7F-8916	[1]	CARRIER-BEARING
33.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)(CLUTCH)
34.	7W-7155	[1]	HOUSING-CLUTCH
35.	108-3560	[1]	PLATE-WARNING (POWER TAKE-OFF)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER