BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
POWER TAKE-OFF GP
BASIC ENGINE
PISTON & ROD GP
#SEBP24680260
176-5745: PISTON & ROD GP
For full view, you need register
Parts for your 3406E INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 221-2305 | [1] | CROWN AS-PISTON | |
| 2. | 132-6663 | [1] | SKIRT-PISTON | |
| 3. | 168-7246 | [1] | PIN-PISTON | |
| 4. | 7E-1177 | [2] | RETAINER-PIN | |
| 5. | 9Y-6054 | [1] | ROD AS-CONNECTING | |
| 5A. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
| 5B. | 7N-2043 | [2] | DOWEL | |
| 5C. | 4P-7377 | [1] | BUSHING | |
| 6. | 328-5573 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 134-3761 | [1] | RING-PISTON (TOP) | |
| 8. | 176-5749 | [1] | RING-PISTON (INTERMEDIATE) | |
| 9. | 189-9771 | [1] | RING-PISTON (OIL CONTROL) | |
| 10. | 277-3076 | [1] | TUBE AS-OIL JET | |
| 11. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP24680261
145-6851: PLUG GP-CYLINDER BLOCK
145-6851 PLUG GP-CYLINDER BLOCK
CANNOT BE USED WITH AIR COMPRESSOR OR PUMP DRIVE
AN ATTACHMENT
CANNOT BE USED WITH AIR COMPRESSOR OR PUMP DRIVE
AN ATTACHMENT
For full view, you need register
#SEBP24680262
256-3664: PLUG GP-CYLINDER BLOCK
256-3664 PLUG GP-CYLINDER BLOCK
FOR USE WITH 3406E INDUSTRIAL ENGINE
AN ATTACHMENT
FOR USE WITH 3406E INDUSTRIAL ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 3406E INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7732 | [2] | PLUG-PIPE |
#SEBP24680263
110-1116: PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
AN ATTACHMENT
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
AN ATTACHMENT
For full view, you need register
Parts for your 3406E INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | |
| (INSTALL PLUG IN THE FORWARD RH CORNER OF THE HEAD) | ||||
#SEBP24680264
234-5986: PLUG GP-CYLINDER HEAD
234-5986 PLUG GP-CYLINDER HEAD
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3406E INDUSTRIAL ENGINE:
#SEBP24680265
234-5996: PLUG GP-CYLINDER HEAD
234-5996 PLUG GP-CYLINDER HEAD
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
#SEBP24680266
160-8330: PLUG GP-ENGINE
For full view, you need register
Parts for your 3406E INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) |
#SEBP24680267
234-9776: PLUG GP-ENGINE
For full view, you need register
#SEBP24680268
135-8015: PLUG GP-FLYWHEEL HOUSING
135-8015 PLUG GP-FLYWHEEL HOUSING
FOR USE WITH @@@@@130-4680@@@@@, @@@@@135-7634@@@@@
CANNOT BE USED WITH @@@@@120-7699@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@130-4680@@@@@, @@@@@135-7634@@@@@
CANNOT BE USED WITH @@@@@120-7699@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP24680269
2W-4909: POWER TAKE-OFF GP
2W-4909 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
For full view, you need register
Information:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
Testing and Adjusting
Disassembly and Assembly
Service Magazine
