176-8219 SLEEVE-EXHAUST MANIFOLD S/N 3KR1-UP 75.015MM INSIDE DIAMETER. PROVIDED RETROFITTING BELLOWS TO SALVAGEABLE SLIP-JOINT MANIFOLDS FIELD INSTALLATION D10R

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP24780161

127-6462: TURBOCHARGER GP

127-6462 TURBOCHARGER GP
S/N 80M1-UP
PART OF 127-9813 TURBOCHARGER GP
ALSO AN ATTACHMENT

i00517390 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	127-6465	[1]	HOUSING
2.	0S-1614	[4]	BOLT (1/4-20X0.5-IN)
	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	8N-9104	[1]	PLATE (115MM BOTTOM EDGE)
4.	135-4487	[1]	CARTRIDGE GP-TURBOCHARGER
6.	8N-9103	[1]	PLATE (71MM BOTTOM EDGE)
7.	1N-3279	[1]	CLAMP AS (COMPRESSOR)
8.	9N-2038	[1]	CLAMP AS-TURBINE
9.	127-6467	[1]	COVER-COMPRESSOR
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24780162

127-9813: TURBOCHARGER GP

127-9813 TURBOCHARGER GP
S/N 80M1-UP
PART OF 115-7641, 135-7810, 155-0058 ENGINE AR
Type 1
ALSO AN ATTACHMENT

i00519264 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	127-6462 Y	[1]	TURBOCHARGER GP
2.	2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
3.	2N-2766	[4]	LOCKNUT (3/8-16-THD)
4.	1S-4295	[1]	GASKET (TURBOCHARGER)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24780163

127-9813: TURBOCHARGER GP

127-9813 TURBOCHARGER GP
S/N 80M1-UP
PART OF 115-7641, 135-7810, 155-0058 ENGINE AR
Type 2
ALSO AN ATTACHMENT

i01119070 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	164-4610 Y	[1]	TURBOCHARGER GP
2.	2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
3.	2N-2766	[4]	LOCKNUT (3/8-16-THD)
4.	1S-4295	[1]	GASKET (TURBOCHARGER)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24780164

164-4610: TURBOCHARGER GP

164-4610 TURBOCHARGER GP
S/N 80M1-UP
PART OF 127-9813 TURBOCHARGER GP
ALSO AN ATTACHMENT

i01119253 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	127-6465	[1]	HOUSING
2.	0S-1614	[4]	BOLT (1/4-20X0.5-IN)
	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	8N-9104	[1]	PLATE (115MM BOTTOM EDGE)
4.	167-9269 Y	[1]	CARTRIDGE GP-TURBOCHARGER
6.	8N-9103	[1]	PLATE (71MM BOTTOM EDGE)
7.	1N-3279	[1]	CLAMP AS (COMPRESSOR)
8.	9N-2038	[1]	CLAMP AS-TURBINE
9.	127-6467	[1]	COVER-COMPRESSOR
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24780165

103-6283: ADAPTER GP-FAST FILL FUEL

103-6283 ADAPTER GP-FAST FILL FUEL
S/N 3KR1-1560
CANNOT BE USED WITH REAR POWER TRAIN GUARD
AN ATTACHMENT

i00470821 SEBP2478

1036283 ADAPTER GP-FAST FILL FUEL Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9D-0630	[1]	CAP-DUST
2.	9G-0371	[1]	BLOCK AS
3.	217-5703	[1]	RECEIVER (FAST FILL FUEL)
4.	9W-9978 I	[1]	HOSE AS
	4J-0527	[2]	SEAL-O-RING
5.	8T-8919	[8]	BOLT (1/2-13X1.75-IN)
6.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	1P-4582	[4]	FLANGE-HALF
8.	6V-9273	[1]	BALL
9.	1B-5170	[1]	PLUG-PIPE
10.	7T-2413	[1]	SHAFT
11.	6G-7803	[1]	VENT AS
12.	8T-4994	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
	1K-6870	[2]	LOCKNUT (3/4-10-THD)
13.	9W-8100	[1]	PLATE
14.	8T-8924 J	[2]	BOLT (3/4-10X2.5-IN)
			-OR-
	7X-0375 L	[2]	BOLT (3/4-10X5-IN)
	8G-9794 L	[2]	SPACER (22.76X42.16X67-MM THK)
15.	7X-0341	[2]	BOLT (1/2-13X7-IN)
	1K-6872	[2]	LOCKNUT (1/2-13-THD)
16.	101-8909	[1]	CAP AS-FILLER
	9X-8600	[1]	SEAL-O-RING
	5P-8502	[1]	PADLOCK GP
	5P-8500 A	[1]	KEY
	8Y-6364 A	[1]	SLEEVE
	A		NOT PART OF THIS GROUP
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FOR DRAWBAR EQUIPPED TRACTORS
	L		FOR COUNTERWEIGHT EQUIPPED TRACTORS

#SEBP24780166

126-3938: ADAPTER GP-FAST FILL FUEL

126-3938 ADAPTER GP-FAST FILL FUEL
S/N 3KR1-1566
FOR USE WITH MACHINES EQUIPPED WITH RIPPER
AN ATTACHMENT

i00514474 SEBP2478

1263938 ADAPTER GP-FAST FILL FUEL Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	127-4978 I	[1]	HOSE AS
2.	142-0406	[1]	BRACKET AS
3.	8C-8844	[2]	BOLT (1-8X5-IN)
4.	7X-0340	[2]	BOLT (1/2-13X6.5-IN)
5.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	6V-8801	[1]	NUT (3/8-16-THD)
7.	9D-0630	[1]	CAP-DUST
8.	2G-9000	[1]	VALVE AS-TANK (FAST FILL FUEL)
9.	6Y-0091	[1]	BLOCK AS
10.	6G-7803	[1]	VENT AS
	5T-8645	[1]	KIT-VENT (FUEL TANK)
11.	1B-5170	[1]	PLUG-PIPE
12.	7T-2413	[1]	SHAFT
13.	6V-9273	[1]	BALL
14.	4J-0527	[2]	SEAL-O-RING
15.	1P-4582	[4]	FLANGE-HALF
16.	8T-8919	[8]	BOLT (1/2-13X1.75-IN)
17.	4L-6454	[1]	BOLT (3/8-16X1-IN)
18.	101-8909	[1]	CAP AS-FILLER
	9X-8600	[1]	SEAL-O-RING
	5P-8502	[1]	PADLOCK GP
	5P-8500 A	[1]	KEY
	8Y-6364 A	[1]	SLEEVE
19.	6V-2686	[1]	CLIP
20.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
21.	4J-8820	[2]	SPACER (1.25X2X1.5-IN THK)
22.	8T-5361	[2]	WASHER-HARD (28X49X5-MM THK)
	A		NOT PART OF THIS GROUP
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24780167

174-0049: ADAPTER GP-FAST FILL FUEL

174-0049 ADAPTER GP-FAST FILL FUEL
S/N 3KR1567-UP
AN ATTACHMENT

i01206569 SEBP2478

1740049 ADAPTER GP-FAST FILL FUEL Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	124-2463	[1]	ADAPTER-FAST FILL FUEL
2.	4J-8820	[2]	SPACER (1.25X2X1.5-IN THK)
3.	6Y-0091	[1]	BLOCK AS
4.	9D-0630	[1]	CAP-DUST
5.	127-4978 I	[1]	HOSE AS
6.	142-0406	[1]	BRACKET AS
	1F-0748	[2]	NUT-WELD (1/2-13-THD)
7.	163-5455	[1]	VALVE AS-SHUTOFF (FAST FILL FUEL)
8.	188-5095	[1]	VENT AS
9.	174-0050	[1]	HOSE AS
10.	1H-8128	[1]	SEAL-O-RING
11.	1J-9671	[2]	SEAL-O-RING
12.	1P-4582	[4]	FLANGE-HALF
13.	2D-4534	[6]	BOLT-SOCKET HEAD (3/8-16X1-IN)
14.	4J-0527	[2]	SEAL-O-RING
15.	4L-6454	[12]	BOLT (3/8-16X1-IN)
16.	5H-6734	[1]	SEAL-O-RING
17.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
18.	5P-2618	[2]	CONNECTOR
19.	6V-2686	[1]	CLIP
20.	6V-8801	[1]	NUT (3/8-16-THD)
21.	7X-0340	[2]	BOLT (1/2-13X6.5-IN)
22.	8C-8844	[2]	BOLT (1-8X5-IN)
23.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
25.	8T-5361	[2]	WASHER-HARD (28X49X5-MM THK)
26.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
27.	6V-5839	[6]	WASHER (11X21X2.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24780168

174-0051: ADAPTER GP-FAST FILL FUEL

174-0051 ADAPTER GP-FAST FILL FUEL
S/N 3KR1561-UP
AN ATTACHMENT

i01206585 SEBP2478

1740051 ADAPTER GP-FAST FILL FUEL Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	124-2463	[1]	ADAPTER-FAST FILL FUEL
2.	9D-0630	[1]	CAP-DUST
3.	9G-0371	[1]	BLOCK AS
4.	9W-8100	[1]	PLATE
5.	163-5455	[1]	VALVE AS-SHUTOFF (FAST FILL FUEL)
6.	188-5095	[1]	VENT AS
7.	174-0050	[1]	HOSE AS
8.	1H-8128	[1]	SEAL-O-RING
9.	1J-9671	[2]	SEAL-O-RING
10.	1K-6870	[2]	LOCKNUT (3/4-10-THD)
11.	1K-6872	[2]	LOCKNUT (1/2-13-THD)
12.	1P-4582	[4]	FLANGE-HALF
13.	2D-4534	[6]	BOLT-SOCKET HEAD (3/8-16X1-IN)
14.	4J-0527	[2]	SEAL-O-RING
15.	4L-6454	[6]	BOLT (3/8-16X1-IN)
16.	5H-6734	[1]	SEAL-O-RING
17.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
18.	5P-2618	[2]	CONNECTOR
19.	7X-0341	[2]	BOLT (1/2-13X7-IN)
20.	7X-0375 B	[2]	BOLT (3/4-10X5-IN)
21.	8G-9794 B	[2]	SPACER (22.76X42.16X67-MM THK)
22.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
24.	8T-4994	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
25.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
26.	8T-8924 B	[2]	BOLT (3/4-10X2.5-IN)
27.	9W-9978 I	[1]	HOSE AS
28.	6V-5839	[6]	WASHER (11X21X2.5-MM THK)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24780169

196-3829: ADAPTER GP-FAST FILL FUEL

196-3829 ADAPTER GP-FAST FILL FUEL
S/N 3KR1567-UP
FOR USE WITH WINCH, COUNTERWEIGHT
AN ATTACHMENT

i01437614 SEBP2478

1963829 ADAPTER GP-FAST FILL FUEL Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR: