111-0625 KIT-OVERPACK S/N 3KR1-UP FOR USE WITH ANY D10 BULLDOZER AN ATTACHMENT D10R TRACK-TYPE TRACTOR

Part No	Qty	Parts name
4L-6459	[12]	BOLT (3/8-16X2.5-IN)
5C-6565	[15]	BOLT (1/2-13X1.125-IN)
5M-3062	[2]	BOLT (3/8-16X0.75-IN)
5P-2228	[4]	BOLT (1/2-13X1-IN)
5S-7379	[9]	BOLT (3/8-16X0.875-IN)
5S-7382	[12]	BOLT (3/8-16X1.375-IN)
5S-7383	[6]	BOLT (3/8-16X1.75-IN)
7X-0288	[6]	BOLT (3/8-16X1.625-IN)
7X-0311	[6]	BOLT (7/16-14X2.25-IN)
7X-0315	[6]	BOLT (7/16-14X3.25-IN)
7X-0325	[2]	BOLT (1/2-13X2.5-IN)
7X-0379	[12]	BOLT (7/8-9X1.5-IN)
7X-0381	[4]	BOLT (7/8-9X2-IN)
7X-0394	[6]	BOLT (7/8-9X7-IN)
7X-0396	[6]	BOLT (7/8-9X8.5-IN)
7X-0403	[1]	BOLT (1-8X2.25-IN)
7X-0405	[14]	BOLT (1-8X2.75-IN)
8K-5130	[6]	BOLT (1-8X11-IN)
8T-8911	[2]	BOLT (5/16-18X2-IN)
8T-8917	[15]	BOLT (1/2-13X1.25-IN)
8T-9393	[3]	BOLT (5/8-11X1.5-IN)
8T-9400	[4]	BOLT (7/8-9X2.5-IN)
9B-7237	[19]	BOLT (3/8-16X1.25-IN)
1J-7468	[6]	CLAMP
9W-2877	[4]	CLAMP
4T-3981	[6]	CLIP (HOLD DOWN)
5F-7055	[4]	CLIP (COMPRESSION)
7S-3916	[4]	CLIP (TAB)
7S-3919	[4]	CLIP (SLOT)
7S-8920	[2]	CLIP (SLOT)
7S-8921	[2]	CLIP (TAB)
3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
1P-4576	[12]	FLANGE-HALF
1P-4577	[12]	FLANGE-HALF
1P-5760	[4]	FLANGE-HALF
5P-8522	[2]	GROMMET
9W-4361	[6]	MOUNT-FLEXIBLE
6V-8801	[12]	NUT (3/8-16-THD)
6V-8188	[4]	NUT (1/2-13-THD)
6V-8189	[2]	NUT (5/16-18-THD)
2J-3507	[6]	NUT-FULL (1-8-THD)
7X-0449	[6]	NUT-FULL (7/8-9-THD)
5J-5365	[2]	PIN
9W-3215	[2]	PLATE
6J-5986	[4]	RETAINER
6J-7500	[4]	RETAINER
9J-2365	[5]	RETAINER
5L-4756	[1]	RING-RETAINING
5P-2322	[2]	SEAL-LIP TYPE
4J-0520	[12]	SEAL-O-RING
4J-5267	[9]	SEAL-O-RING
1P-3703	[6]	SEAL-RECTANGULAR
1P-3705	[4]	SEAL-RECTANGULAR
4T-9707 B	[15]	SHIM (0.8-MM THK)
8E-1378 B	[15]	SHIM (0.8-MM THK)
9B-1948	[1]	SPACER (1.031X1.625X1-IN THK)
1D-5875	[2]	SPACER (0.531X1.25X1.13-IN THK)
7T-4809	[4]	SPACER (96.5X114.3X16.5-MM THK)
7K-1181	[4]	STRAP-CABLE
8T-2561	[6]	WASHER-HARD (10.5X28.5X5-MM THK)
8T-4122	[3]	WASHER-HARD (17X32X3.5-MM THK)
8T-5360	[6]	WASHER (12X22.5X2.5-MM THK)
5P-1075	[14]	WASHER-HARD (10.2X22.5X3-MM THK)
7X-0525	[6]	WASHER-HARD (24X41.5X6-MM THK)
7X-0572	[6]	WASHER-HARD (24X44.5X6-MM THK)
7X-0589	[6]	WASHER-HARD (12X28.5X5-MM THK)
8T-4223	[15]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
8T-4896	[30]	WASHER-HARD (10.2X18.5X2.5-MM THK)
B		USE AS REQUIRED

#SEBP24780751

135-0821: KIT-OVERPACK

KIT-OVERPACK

135-0821 KIT-OVERPACK
S/N 3KR1-UP
FOR USE WITH RIPPER AR
AN ATTACHMENT

i01123447 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9U-9623	[2]	BAR
4L-6454	[4]	BOLT (3/8-16X1-IN)
4L-9337	[6]	BOLT (3/8-16X1.5-IN)
7X-0288	[4]	BOLT (3/8-16X1.625-IN)
7X-0345	[8]	BOLT (5/8-11X1.75-IN)
7X-0365	[12]	BOLT (3/4-10X1.5-IN)
7X-0405	[12]	BOLT (1-8X2.75-IN)
7X-0439	[12]	BOLT (1-1/2-6X5-IN)
8T-2502	[12]	BOLT (3/8-16X1.125-IN)
8T-7008	[2]	BOLT (3/8-16X3-IN)
6K-0138	[4]	BOLT-LOCKING (5/8-11X1.25-IN)
9M-2904	[6]	CLAMP-HOSE
3G-8054	[3]	CLIP (TAB)
3G-8057	[3]	CLIP (SLOT)
4P-7581	[1]	CLIP (LADDER)
8E-1042	[2]	CLIP (SLOT)
8E-1043	[2]	CLIP (TAB)
6V-8724	[1]	ELBOW
6V-8628	[4]	ELBOW
6V-8723	[2]	ELBOW
8T-1905	[1]	ELBOW
3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
1P-4577	[12]	FLANGE-HALF
5P-8112	[2]	GROMMET
6V-0974	[3]	GROMMET
130-9191	[4]	GROMMET
7T-4501	[1]	PIN
7T-4502	[1]	PIN
125-9215	[1]	PIN
135-5114	[1]	PIN
102-9062	[1]	PIN AS
102-9073	[1]	SPRING
7T-7305	[9]	PLATE
193-3081	[1]	PLATE AS (LH)
1F-0750	[2]	NUT-WELD (3/8-16-THD)
193-3080	[1]	PLATE AS (RH)
1F-0750	[2]	NUT-WELD (3/8-16-THD)
9W-8576	[2]	PLUG
9J-4782	[2]	PROTECTOR
6Y-1202	[3]	RETAINER AS
7M-9107	[1]	RING-LOCK
6K-3630	[1]	RING
7J-4169	[2]	RING-SNAP
3E-6756	[6]	SEAL-LIP TYPE
3E-6758	[6]	SEAL-LIP TYPE
7K-9211	[6]	SEAL-LIP TYPE
3J-1907	[2]	SEAL-O-RING
3J-7354	[4]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
4J-0520	[12]	SEAL-O-RING
4J-5477	[4]	SEAL-O-RING
6V-8397	[4]	SEAL-O-RING
130-1977	[2]	SHIELD
139-2456	[2]	SHIELD
139-2455	[2]	SHIELD
6Y-9287	[2]	SPACER (76.8X170X40-MM THK)
9U-8404	[2]	SPACER (89.4X180X35-MM THK)
9W-6371	[12]	SPACER (108X230X3-MM THK)
9W-1991	[2]	SPACER (10.7X17.1X40-MM THK)
9X-6772	[3]	STRAP-CABLE
7X-0515	[8]	WASHER-HARD (17X35X5-MM THK)
8T-4167	[2]	WASHER-HARD (26X44X4-MM THK)
5P-1075	[10]	WASHER-HARD (10.2X22.5X3-MM THK)
7X-0537	[12]	WASHER-HARD (40.5X67X6-MM THK)
7X-0616	[12]	WASHER-HARD (28X57X6-MM THK)
8T-4896	[19]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#SEBP24780752

110-4724: LINK GP-STABILIZER

LINK GP-STABILIZER

110-4724 LINK GP-STABILIZER
S/N 3KR1-UP
PART OF 117-5724 CYLINDER AR-DUAL TILT
AN ATTACHMENT

i00470728 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-0396	[8]	BOLT (7/8-9X8.5-IN)
2.	9J-6062	[2]	CAP-BEARING
3.	7X-0449	[8]	NUT-FULL (7/8-9-THD)
4.	8E-1378 B	[52]	SHIM (0.8-MM THK)
5.	110-4729	[1]	LINK AS
	3G-7891	[2]	BEARING
	8P-9770	[1]	PLATE
	B		USE AS REQUIRED

#SEBP24780753

9J-6061: LINK GP-STABILIZER

LINK GP-STABILIZER

9J-6061 LINK GP-STABILIZER
S/N 4KP1-UP; 4LP1-UP
PART OF 4T-8186 PUSH ARM GP
AN ATTACHMENT

i00433733 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-0396	[8]	BOLT (7/8-9X8.5-IN)
2.	9J-6063	[1]	LINK AS
3.	3G-7891	[2]	BEARING
4.	8E-1378 B	[52]	SHIM (0.8-MM THK)
5.	9J-6062	[2]	CAP-BEARING
6.	7X-0449	[8]	NUT-FULL (7/8-9-THD)
	B		USE AS REQUIRED

#SEBP24780754

125-0370: LINKAGE GP-IMPLEMENT

LINKAGE GP-IMPLEMENT

125-0370 LINKAGE GP-IMPLEMENT
S/N 3KR1-UP
DOZER-TILT
PART OF 114-5009 CONTROL AR-HYDRAULIC

i00520084 SEBP2478

1250370 LINKAGE GP-IMPLEMENT Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-0145	[1]	CHANNEL AS
	1F-0750	[6]	NUT-WELD (3/8-16-THD)
	7T-1099	[2]	LINK
	9K-6034	[1]	LUG
2.	1S-9593	[1]	STRAP-CABLE
3.	8T-2502	[7]	BOLT (3/8-16X1.125-IN)
4.	8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	2L-6267	[3]	LOCKNUT (3/8-24-THD)
6.	3T-9345	[1]	BRACKET
7.	174-5732	[1]	SHAFT
8.	4L-6454	[3]	BOLT (3/8-16X1-IN)
9.	1B-8704	[3]	KEY-WOODRUFF
10.	8P-8896	[1]	LEVER
11.	8T-0741	[12]	SEAL-LIP TYPE
12.	4J-3044	[6]	BEARING AS-NEEDLE
13.	6V-2866	[4]	SPACER
14.	6V-2867	[2]	BOOT-ROD END
15.	169-1644	[3]	BOOT
16.	6V-1193	[10]	SCREW-HEX SOCKET (3/8-16X0.625-IN)
17.	1K-0502	[2]	WASHER (16.3X25.4X1.2-MM THK)
18.	8E-9299	[1]	PLATE
19.	121-6160	[1]	HANDLE (BULLDOZER CONTROL LEVER)
20.	119-6141	[1]	LEVER AS
21.	174-5733	[1]	SHAFT
22.	1H-1200	[1]	PIN-SPRING
23.	5J-5315	[3]	ROD END
24.	6V-8183	[5]	NUT-FULL (3/8-24-THD)
25.	3T-2592	[1]	ROD
26.	173-2024	[1]	ROD
27.	9P-3697	[1]	BOOT
28.	9S-1303	[1]	PIN
29.	3B-4607	[1]	PIN-COTTER
30.	9P-7361	[1]	FLANGE
31.	4D-4064	[2]	ROD END (3/8-24-THD)
32.	3T-9352	[1]	BRACKET
33.	3T-9353	[1]	SHAFT
34.	4D-8924	[1]	LEVER
35.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
36.	6V-8801	[2]	NUT (3/8-16-THD)
37.	5S-7383	[2]	BOLT (3/8-16X1.75-IN)
38.	5D-1849	[1]	LEVER
39.	5P-1075	[5]	WASHER-HARD (10.2X22.5X3-MM THK)
40.	2K-4973	[2]	LOCKNUT (3/8-16-THD)
41.	3S-6956	[1]	ROD
42.	8E-7364	[1]	BOOT
43.	7X-0448	[1]	NUT (5/8-11-THD)
44.	8E-5962	[1]	PLATE
45.	119-7307	[1]	PLATE AS
		[1]	RIVET
	122-6133	[2]	WASHER (CURVED SPRING)
46.	3E-4374	[1]	STUD (3/8-24X3.15-IN)

#SEBP24780755

8E-7804: LINKAGE GP-IMPLEMENT

LINKAGE GP-IMPLEMENT

8E-7804 LINKAGE GP-IMPLEMENT
S/N 3KR1-UP
ADJUSTABLE RIPPER
PART OF 117-7091 CONTROL AR-HYDRAULIC
AN ATTACHMENT

i00415859 SEBP2478

8E7804 LINKAGE GP-IMPLEMENT Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1736	[1]	HANDLE
2.	122-4545	[1]	LEVER
3.	9U-9337	[1]	PLATE
4.	8E-7364	[1]	BOOT
5.	2L-6267	[2]	LOCKNUT (3/8-24-THD)
6.	3P-3676	[1]	CLAMP
7.	174-5733	[1]	SHAFT
8.	4J-3044	[4]	BEARING AS-NEEDLE
9.	3T-9345	[1]	BRACKET
10.	174-5732	[1]	SHAFT
11.	5J-5315	[2]	ROD END
12.	6V-8183	[2]	NUT-FULL (3/8-24-THD)
13.	6P-7072	[1]	ROD
14.	9S-1303	[2]	PIN
	3B-4607	[2]	PIN-COTTER
15.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	8T-0741	[8]	SEAL-LIP TYPE
17.	1S-9593	[2]	STRAP-CABLE
18.	169-1644	[2]	BOOT
19.	3T-2592	[1]	ROD
20.	5S-7383	[1]	BOLT (3/8-16X1.75-IN)
	6V-8801	[1]	NUT (3/8-16-THD)
21.	1H-1200	[1]	PIN-SPRING
22.	8T-2502	[2]	BOLT (3/8-16X1.125-IN)
23.	119-7308	[1]	PLATE AS
24.	122-6133	[2]	WASHER (CURVED SPRING)(8.03MM ID)
		[1]	RIVET
25.	109-0628	[1]	HINGE
26.	1B-4430	[2]	NUT-JAM (1/2-20-THD)
27.	197-5108	[1]	FILM-INSTRUCTION (RIPPER CONTROL)

#SEBP24780756

8E-9869: LINKAGE GP-IMPLEMENT

LINKAGE GP-IMPLEMENT

8E-9869 LINKAGE GP-IMPLEMENT
S/N 3KR1-UP
PART OF 116-2030 CONTROL AR-DUAL TILT
AN ATTACHMENT

i00417769 SEBP2478

8E9869 LINKAGE GP-IMPLEMENT Parts scheme

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	103-8120	[1]	HARNESS AS-WIRING (DUAL TILT CONTROL)
	7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	7N-7780	[2]	PIN-CONNECTOR (14-GA TO 18-GA)
	7N-7781	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	5P-6003 BD		TUBE
3.	3E-8680 Y	[1]	SWITCH GP-HANDLE (DUAL TILT CONTROL)
4.	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
5.	8C-8514	[2]	SCREW-MACHINE (8-32X0.375-IN)
	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
6.	7K-1181	[2]	STRAP-CABLE
7.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	9W-2381	[1]	ADAPTER
9.	197-5109	[1]	FILM (INSTRUCTION)(DOZER CONTROL)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP24780757

135-0824: MODIFICATION AR-BULLDOZER

MODIFICATION AR-BULLDOZER

135-0824 MODIFICATION AR-BULLDOZER
S/N 3KR1-UP
BULLDOZER-LANDFILL/PROVIDES SLEEVE GUARDED HOSES
PART OF 130-3859 WASTE HANDLING AR
AN ATTACHMENT

i00526490 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
135-0822 I	[1]	HOSE AS
		1.13M LENGTH
		60 DEGREE COUPLING EACH END
135-0823 I	[1]	HOSE AS
		1.2M LENGTH
		60 DEGREE COUPLING EACH END
135-1833 I	[2]	HOSE AS
		77.5CM LENGTH EACH
		1-60 DEGREE & 1-STRAIGHT COUPLING
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24780758

135-1830: MODIFICATION AR-BULLDOZER

MODIFICATION AR-BULLDOZER

135-1830 MODIFICATION AR-BULLDOZER
S/N 3KR1-UP
BULLDOZER-LANDFILL
FOR USE WITH WASTE DISPOSAL AR, DUAL TILT CYLINDER AR
AN ATTACHMENT

i00569144 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
135-1828 I	[1]	HOSE AS
		1.54M LENGTH
		1-90 DEGREE & 1-60 DEGREE COUPLING
135-1829 I	[1]	HOSE AS
		1.4M LENGTH
		1-90 DEGREE & 1-60 DEGREE COUPLING
135-1831 I	[1]	HOSE AS
		1.14M LENGTH
		1-90 DEGREE & 1-60 DEGREE COUPLING
135-1832 I	[1]	HOSE AS
		1.3M LENGTH
		1-90 DEGREE & 1-60 DEGREE COUPLING
135-1833 I	[2]	HOSE AS
		77.5CM LENGTH EACH
		1-60 DEGREE & 1 STRAIGHT COUPLING
135-1834 I	[2]	HOSE AS
		1.4M LENGTH EACH
		STRAIGHT COUPLINGS EACH END
200-2670 I	[2]	HOSE AS
		1.3M LENGTH EACH
		1-90 DEGREE & 1 STRAIGHT COUPLING
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24780759

4T-8181: PUSH ARM GP

PUSH ARM GP

4T-8181 PUSH ARM GP -RH
S/N 4KP1-UP; 4LP1-UP
PART OF 4T-8186 PUSH ARM GP
AN ATTACHMENT

i00377184 SEBP2478

For full view, you need register

Parts for your D10R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-5130	[4]	BOLT (1-8X11-IN)
	2J-3507	[4]	NUT-FULL (1-8-THD)
2.	7T-4966	[1]	CAP-BEARING
3.	138-2829	[1]	PUSH ARM AS (RH)
	8J-5326	[1]	PLATE
4.	138-2834	[1]	BRACKET AS (RH)
5.	3G-8052	[1]	BEARING
6.	3G-8051	[1]	BUSHING
7.	9W-9163	[1]	BRACKET AS
8.	1U-1187	[1]	BEARING AS
	4T-9702	[1]	CAP-BEARING
9.	166-4113	[1]	STEP
10.	1U-2533	[1]	BAR
11.	8P-9770	[1]	PLATE
12.	4T-9707 B	[26]	SHIM (0.8-MM THK)
	B		USE AS REQUIRED