ELECTRICAL AND STARTING SYSTEM
ALARM GPWIRING GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP
#SEBP24790190
127-2978: WARNING GP-BACKUP
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.8-M) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (31-CM) | |||
| 2. | 7I-4717 | [1] | PLATE AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 3. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 8. | 116-0118 | [1] | CLIP | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24790191
112-6080: WIRING GP-CAB
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-6655 | [1] | SWITCH AS-ROTARY (WIPER, WASHER)(FRONT UPPER) | |
| 7T-9302 | [1] | KNOB AS-WIPER SWITCH (WIPER, WASHER) | ||
| 2H-3920 | [1] | LOCKWASHER | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 2. | 4E-4454 | [1] | PLUG | |
| 3. | 3E-0109 | [3] | PLUG (ROCKER SWITCH) | |
| 4. | 3V-4694 | [4] | PLUG-BUTTON | |
| 5. | 102-3981 | [1] | PANEL | |
| 6. | 9X-2042 M | [6] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 7. | 160-6382 | [1] | GROMMET | |
| 8. | 4K-5122 | [3] | HOLDER AS-FUSE | |
| (EACH INCLUDES) | ||||
| 7N-2867 | [1] | CAP-FUSE HOLDER | ||
| 9. | 3K-8782 | [3] | FUSE (10-AMPERE) | |
| 10. | 104-7837 | [1] | PLATE | |
| 11. | 101-8161 | [1] | HARNESS AS-CAB (REAR) | |
| 12. | 127-1030 | [1] | HARNESS AS-PANEL | |
| 13. | 9G-2264 | [3] | CLIP-CONNECTOR | |
| 14. | 142-0731 | [1] | HARNESS AS | |
| 15. | 8C-9678 | [1] | LAMP GP-DOME (24-VOLT) | |
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7782 | [1] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 7N-9943 | [1] | LAMP (24-VOLT)(DOME) | ||
| 7T-0020 | [1] | LENS-DOME LAMP | ||
| 16. | 9X-1046 M | [3] | SCREW (M4X0.7X18-MM) | |
| 17. | 9G-2265 | [1] | CLIP | |
| 18. | 142-0732 | [1] | HARNESS AS-CAB | |
| 19. | 3S-2093 | [15] | STRAP-CABLE | |
| 20. | 7X-7877 E | STRIP-EDGE | ||
| 21. | 096-6166 | [3] | WASHER-HARD (4.5X9X1-MM THK) | |
| 22. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 23. | 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | |
| 24. | 3T-6655 | [1] | SWITCH AS-ROTARY (WIPER, WASHER)(FRONT LOWER) | |
| 7T-9302 | [1] | KNOB AS-WIPER SWITCH (WIPER, WASHER) | ||
| 2H-3920 | [1] | LOCKWASHER | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 25. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP24790192
112-5960: WIRING GP-CONSOLE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-9166 | [1] | HARNESS AS-SWITCH | |
| 2. | 137-1722 | [1] | HARNESS AS-CONSOLE | |
| 3. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 4. | 3E-8817 | [1] | ACTUATOR | |
| 3E-9327 | [1] | SWITCH AS (CENTERSHIFT) | ||
| 3E-8825 | [1] | LAMP (24-VOLT)(CENTERSHIFT PIN PULLER SWITCH) | ||
| 5. | 7G-7053 | [1] | GROMMET | |
| 6. | 9G-9813 Y | [1] | ALARM GP (24-VOLT) | |
| 7. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 8. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 10. | 2S-9255 | [4] | BOLT-SOCKET HEAD (4-40X0.375-IN) | |
| 11. | 5S-4246 | [4] | LOCKWASHER | |
| 12. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 13. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(SHIFT INDICATOR) | |
| 14. | 9M-8406 | [1] | CLIP (LOOP) | |
| 15. | 9G-9150 | [1] | CLIP | |
| 16. | 3S-2093 | [2] | STRAP-CABLE | |
| 17. | 107-7090 | [1] | PLATE | |
| 18. | 7M-3361 | [1] | GROMMET | |
| 19. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 21. | 2V-8259 | [2] | GROMMET | |
| 22. | 134-6553 Y | [1] | CONTROL GP-POWER TRAIN | |
| 23. | 4D-7794 | [2] | CLIP | |
| 24. | 3E-0109 | [4] | PLUG (ROCKER SWITCH) | |
| 25. | 9G-2265 | [1] | CLIP | |
| 26. | 3H-2900 | [1] | GROMMET | |
| 27. | 8M-2770 | [1] | CLIP (LOOP) | |
| 28. | 8T-9471 | [1] | GROMMET | |
| 29. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 30. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 31. | 117-9364 | [1] | CONTROL GP-RELAY | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24790193
112-5960: WIRING GP-CONSOLE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-9166 | [1] | HARNESS AS-SWITCH | |
| 2. | 137-1722 | [1] | HARNESS AS-CONSOLE | |
| 3. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 4. | 3E-9327 | [1] | SWITCH AS (CENTERSHIFT) | |
| 3E-8825 | [1] | LAMP (24-VOLT)(CENTERSHIFT) | ||
| 3E-8817 | [1] | ACTUATOR (CENTERSHIFT) | ||
| 5. | 7G-7053 | [1] | GROMMET | |
| 6. | 9G-9813 Y | [1] | ALARM GP (24-VOLT) | |
| 7. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 8. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 10. | 2S-9255 | [4] | BOLT-SOCKET HEAD (4-40X0.375-IN) | |
| 11. | 5S-4246 | [4] | LOCKWASHER | |
| 12. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 13. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(SHIFT INDICATOR) | |
| 14. | 9M-8406 | [1] | CLIP (LOOP) | |
| 15. | 9G-9150 | [1] | CLIP | |
| 16. | 3S-2093 | [2] | STRAP-CABLE | |
| 17. | 107-7090 | [1] | PLATE | |
| 18. | 7M-3361 | [1] | GROMMET | |
| 19. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 21. | 2V-8259 | [2] | GROMMET | |
| 22. | 143-9634 CY | [1] | CONTROL GP-POWER TRAIN | |
| 23. | 4D-7794 | [2] | CLIP | |
| 24. | 3E-0109 | [4] | PLUG (ROCKER SWITCH) | |
| 25. | 9G-2265 | [1] | CLIP | |
| 26. | 3H-2900 | [1] | GROMMET | |
| 27. | 8M-2770 | [1] | CLIP (LOOP) | |
| 28. | 8T-9471 | [1] | GROMMET | |
| 29. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 30. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 31. | 117-9364 | [1] | CONTROL GP-RELAY (SHIFT CONSOLE) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24790194
112-5960: WIRING GP-CONSOLE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-3580 C | [1] | HARNESS AS-FRONT CHASSIS | |
| 2. | 142-5835 C | [1] | HARNESS AS-TRANSMISSION | |
| 3. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 4. | 3E-9327 | [1] | SWITCH AS (CENTERSHIFT) | |
| 3E-8825 | [1] | LAMP (24-VOLT)(CENTERSHIFT) | ||
| 3E-8817 | [1] | ACTUATOR (CENTERSHIFT) | ||
| 5. | 7G-7053 | [1] | GROMMET | |
| 6. | 9G-9813 Y | [1] | ALARM GP (24-VOLT) | |
| 7. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 8. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 10. | 6V-2480 C | [4] | SCREW (4-40X0.5-IN) | |
| 11. | 5S-4246 | [4] | LOCKWASHER | |
| 12. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 13. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(SHIFT INDICATOR) | |
| 14. | 9M-8406 | [1] | CLIP (LOOP) | |
| 15. | 9G-9150 | [1] | CLIP | |
| 16. | 3S-2093 C | [4] | STRAP-CABLE | |
| 17. | 3V-4694 C | [1] | PLUG-BUTTON | |
| 18. | 9R-2620 C | [1] | PLUG | |
| 19. | 3H-2900 | [1] | GROMMET | |
| 20. | 3E-0109 | [4] | PLUG (ROCKER SWITCH) | |
| 21. | 2V-8259 | [2] | GROMMET | |
| 22. | 4D-7794 C | [2] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24790195
149-4619: WIRING GP-DIFFERENTIAL LOCK
149-4619 WIRING GP-DIFFERENTIAL LOCK
S/N 6TM1-442
AN ATTACHMENT AND FIELD INSTALLATION
S/N 6TM1-442
AN ATTACHMENT AND FIELD INSTALLATION
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(INDICATOR PANEL) | |
| 2. | 149-4353 | [1] | HARNESS AS-WIRING (DIFFERENTIAL LOCK) | |
| 3. | 8S-4626 | [1] | SPLICE-WIRE | |
| 4. | 149-4354 | [1] | WIRE AS | |
| 5. | 149-4355 | [1] | WIRE AS | |
| 6. | 9G-2264 | [1] | CLIP-CONNECTOR | |
| 7. | 3T-3048 | [1] | CLIP AS | |
| 8. | 3S-2093 | [10] | STRAP-CABLE | |
| 9. | 139-2120 | [1] | SWITCH AS (DIFF. LOCK/UNLOCK) | |
| 3E-8825 | [2] | LAMP (24-VOLT)(DIFF. LOCK/UNLOCK) | ||
| 123-5861 | [1] | ACTUATOR (DIFF. LOCK/UNLOCK) | ||
| 10. | 146-5128 | [1] | FILM-PANEL |
#SEBP24790196
112-5952: WIRING GP-ENGINE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 2. | 8T-4199 M | [2] | BOLT (M8X1.25X12-MM) | |
| 3. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 4. | 8W-8909 | [1] | SLEEVE | |
| 5. | 143-2445 | [1] | HARNESS AS (ENGINE) | |
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 3K-8670 | [1] | TERMINAL AS | ||
| 5P-1475 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 7H-1181 | [1] | TERMINAL AS | ||
| 2L-8066 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 7N-7782 | [1] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 9G-3673 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 9G-4352 | [1] | HOUSING-RECEPTACLE (8-GA TO 10-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 8M-2773 | [3] | CLIP (LOOP) | |
| 7. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8. | 9G-9150 | [1] | CLIP | |
| 9. | 4K-8864 | [2] | CLIP | |
| 10. | 6D-4972 | [1] | SPACER (0.344X0.625X0.5-IN THK) | |
| 11. | 3J-1907 | [2] | SEAL-O-RING | |
| 12. | 115-7103 | [1] | SWITCH AS-PRESSURE (FUEL) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7781 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 13. | 4D-7794 | [4] | CLIP | |
| 14. | 9G-9152 | [1] | CLIP | |
| 15. | 5P-3422 | [1] | TEE-PIPE | |
| 16. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 295-0759 | [1] | SENDER AS-PRESSURE (ENGINE OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 18. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
#SEBP24790197
112-5978: WIRING GP-FRONT
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-0879 | [1] | HARNESS AS-CHASSIS | |
| 2. | 6D-4244 | [1] | CLIP | |
| 3. | 5M-3062 | [20] | BOLT (3/8-16X0.75-IN) | |
| 4. | 8T-4896 | [25] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 9G-2265 | [1] | CLIP | |
| 6. | 7K-1181 | [1] | STRAP-CABLE | |
| 7. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 8. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 9. | 9G-9150 | [3] | CLIP | |
| 10. | 9G-9154 | [1] | CLIP | |
| 11. | 9G-9152 | [1] | CLIP | |
| 12. | 6D-4246 | [5] | CLIP (LOOP) | |
| 13. | 8M-2770 | [3] | CLIP (LOOP) | |
| 14. | 3E-9367 | [1] | SWITCH AS-BALL (CENTERSHIFT IND) | |
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-8205 | [1] | HOUSING-PLUG | ||
| 15. | 8M-2773 | [1] | CLIP (LOOP) | |
| 16. | 4D-7794 | [6] | CLIP | |
| 17. | 4K-8864 | [1] | CLIP | |
| 18. | 9L-1566 | [2] | SUPPORT | |
| 19. | 3T-0050 | [2] | CLIP | |
| 20. | 2M-9346 | [1] | SWITCH AS-PRESSURE (STOP LAMP) | |
| 3E-5239 | [1] | RELAY AS (24-VOLT) | ||
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 21. | 3S-2093 | [4] | STRAP-CABLE | |
| 22. | 3J-1907 | [1] | SEAL-O-RING | |
| 23. | 3T-3048 | [3] | CLIP AS | |
| 24. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 25. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 26. | 112-2404 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 27. | 106-9188 | [1] | CONTROL GP-RELAY ELECTRONIC | |
| 28. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 29. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 132-0113 | [1] | PLATE AS | |
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 31. | 9M-8406 | [2] | CLIP (LOOP) | |
| 32. | 112-2404 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| B | USE AS REQUIRED | |||
#SEBP24790198
112-5978: WIRING GP-FRONT
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-5445 C | [1] | HARNESS AS-CHASSIS | |
| 2. | 6D-4244 | [1] | CLIP | |
| 3. | 5M-3062 | [21] | BOLT (3/8-16X0.75-IN) | |
| 4. | 8T-4896 | [26] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 9G-2265 | [1] | CLIP | |
| 6. | 7K-1181 | [1] | STRAP-CABLE | |
| 7. | 6V-8801 C | [4] | NUT (3/8-16-THD) | |
| 8. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 9. | 9G-9150 C | [5] | CLIP | |
| 10. | 9G-9154 C | [2] | CLIP | |
| 11. | 9G-9152 C | [2] | CLIP | |
| 12. | 6D-4246 | [4] | CLIP (LOOP) | |
| 13. | 8M-2770 C | [4] | CLIP (LOOP) | |
| 14. | 3E-9367 | [1] | SWITCH AS-BALL (CENTERSHIFT IND) | |
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-8205 | [1] | HOUSING-PLUG | ||
| 15. | 8M-2773 C | [2] | CLIP (LOOP) | |
| 16. | 4D-7794 C | [8] | CLIP | |
| 17. | 9X-2498 C | [2] | SCREW-HEX FLANGE (10-24X0.5-IN) | |
| 18. | 9L-1566 | [2] | SUPPORT | |
| 19. | 6I-1418 C | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 20. | 125-9352 | [1] | SWITCH AS-PRESSURE (STOP LAMP) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 21. | 3S-2093 | [4] | STRAP-CABLE | |
| 22. | 3J-1907 | [1] | SEAL-O-RING | |
| 23. | 3T-3048 | [3] | CLIP AS | |
| 24. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 25. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 26. | 112-2404 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 27. | 106-9188 | [1] | CONTROL GP-RELAY ELECTRONIC | |
| 28. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 29. | 8T-4205 C | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 144-8525 C | [1] | PLATE AS | |
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 31. | 7C-4354 | [3] | CLIP | |
| 32. | 112-2404 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 33. | 4M-5281 C | [2] | BOLT (1/4-20X0.75-IN) | |
| 34. | 8X-5489 C | [1] | SLEEVE | |
| 35. | 7X-0440 C | [4] | BOLT (5/16-18X1.75-IN) | |
| 36. | 117-9364 C | [1] | CONTROL GP-RELAY | |
| 37. | 144-8622 CY | [1] | ELECTRONICS GP-POWER TRAIN | |
| 38. | 132-2148 CY | [1] | CONTROL GP-UNPROGRAMMED | |
| 39. | 8T-9655 C | [8] | MOUNT-ISOLATION | |
| 40. | 6V-3964 C | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 41. | 1P-7009 | [1] | CLIP | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24790199
112-5978: WIRING GP-FRONT
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-7784 | [1] | HARNESS AS-CHASSIS | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 155-2272 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 6D-4244 | [1] | CLIP | |
| 3. | 5M-3062 BC | [22] | BOLT (3/8-16X0.75-IN) | |
| 4. | 8T-4896 C | [30] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 9G-2265 | [1] | CLIP | |
| 6. | 7K-1181 | [1] | STRAP-CABLE | |
| 7. | 6V-8801 B | [4] | NUT (3/8-16-THD) | |
| 8. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 9. | 9G-9150 | [5] | CLIP | |
| 10. | 9G-9154 | [2] | CLIP | |
| 11. | 9G-9152 | [2] | CLIP | |
| 12. | 6D-4246 | [4] | CLIP (LOOP) | |
| 13. | 8M-2770 | [4] | CLIP (LOOP) | |
| 14. | 3E-9367 | [1] | SWITCH AS-BALL (CENTERSHIFT IND) | |
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-8205 | [1] | HOUSING-PLUG | ||
| 15. | 8M-2773 | [2] | CLIP (LOOP) | |
| 16. | 4D-7794 | [8] | CLIP | |
| 18. | 9L-1566 | [2] | SUPPORT | |
| 19. | 1P-7009 | [1] | CLIP | |
| 20. | 166-7781 | [1] | SWITCH AS-PRESSURE (STOP LAMP) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 21. | 3S-2093 | [5] | STRAP-CABLE | |
| 22. | 3J-1907 | [1] | SEAL-O-RING | |
| 23. | 3T-3048 | [3] | CLIP AS | |
| 24. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 25. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 26. | 112-2404 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| 26A. | 112-2404 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| (EACH INCLUDES) | ||||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 27. | 106-9188 | [1] | CONTROL GP-RELAY ELECTRONIC (PARKING BRAKE) | |
| 28. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 29. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 208-7782 | [1] | PLATE AS | |
| 31. | 7C-4354 | [3] | CLIP | |
| 33. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 34. | 8X-5489 | [1] | SLEEVE | |
| 35. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 36. | 117-9364 B | [1] | CONTROL GP-RELAY | |
| 37. | 144-8622 Y | [1] | ELECTRONICS GP-POWER TRAIN | |
| 38. | 177-4493 Y | [1] | CONTROL GP-POWER TRAIN | |
| 39. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 40. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 41. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 42. | 3T-1480 | [1] | WIRE AS | |
| 43. | 8X-1853 | [2] | SPACER (13.1X15.9X30.4-MM THK)(10.1X15.9X30.4MM THK) | |
| 44. | 8T-2501 | [2] | BOLT (3/8-16X2-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
