AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-4656 DRIVE GP-CIRCLE S/N 6TM1-365 PART OF 112-4105 BLADE AR 120H MOTOR GRADER


HYDRAULIC SYSTEM
DRIVE GP
LINES GP-HYDRAULIC

MOTOR GRADER 120H MOTOR GRADER 6TM
 120H Motor Grader 6TM00001-00442 (MACHINE) POWERED BY 3116 Engine SEBP2479 120H 6TM   (1996)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-CIRCLE
110-4656 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
 

#SEBP24790520
 

110-4656: DRIVE GP-CIRCLE

110-4656 DRIVE GP-CIRCLE
S/N 6TM1-365
PART OF 112-4105 BLADE AR
i00123131 SEBP2479
1104656 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-7339 [1] SEAL-O-RING  
2. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
3. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 9D-1491 [1] COUPLING  
5. 4H-6996 [1] PIN-SPRING  
6. 2H-9247 [1] SEAL-O-RING  
7. 1B-5174 [1] PLUG-PIPE  
8. 9D-1142 [1] WORM-CIRCLE DRIVE  
9. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
10. 8T-0336 [1] FITTING-PRESSURE RELIEF  
11. 2B-7410 [1] PLUG-PIPE  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
13. 2G-6695 [1] BRACKET  
14. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
15. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
16. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
  5K-8454 [3] BOLT (1/2-13X1.12-IN)(SELF-LOCKING)  
18. 110-4654 [1] COVER AS  
19. 106-7129 [1] BUSHING  
20. 1L-7388 [2] RING-RETAINING  
21. 5H-4909 [1] SEAL-O-RING  
22. 106-7130 [1] GEAR-WORM (36-TEETH)  
23. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
24. 4F-9653 [1] SEAL-O-RING  
25. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
26. 8W-5092 [1] PINION-CIRCLE DRIVE  
27. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
  5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
28. 106-7131 [1] SHAFT  
29. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
30. 9W-6645 [1] SEAL GP-DUO-CONE  
31. 110-4655 [1] HOUSING AS  
  110-4652 [1] HOUSING  
32. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
33. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
34. 106-7128 [1] BUSHING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP24790521
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 6TM366-442
PART OF 112-4105 BLADE AR
ALSO AN ATTACHMENT
i00122144 SEBP2479
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 CY [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
19. 1F-7958 C [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
20A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
20B. 8D-7426 [1] BUSHING  
20C. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
20D. 8D-9804 [1] HOUSING-DRIVE  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 9X-8887 C [2] BOLT (3/4-10X3-IN)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 261-8553 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6Y-7953 [6] DISC-FRICTION  
43. 6G-5543 B [6] SHIM (0.13-MM THK)  
44. 6G-6122 [1] SPRING-DISC  
45. 2G-0478 [5] PLATE-CLUTCH  
46. 1B-4046 [2] CONE-BEARING  
47. 7D-8984 B [6] SHIM (0.007-IN THK)  
48. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
49. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
50. 8D-7424 [1] SPACER (48X81X6-MM THK)  
51. 6G-5544 B [9] SHIM (0.25-MM THK)  
52. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24790522
 

142-7379: LINES GP-CENTERSHIFT LOCK

142-7379 LINES GP-CENTERSHIFT LOCK
S/N 6TM366-442
PART OF 112-4105 BLADE AR
i00555627 SEBP2479
1427379 LINES GP-CENTERSHIFT LOCK Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8397 [6] SEAL-O-RING  
2. 6V-8724 [3] ELBOW  
3. 3J-1907 [6] SEAL-O-RING  
4. 142-7374 I [1] HOSE AS  
5. 6V-8636 [3] CONNECTOR  
6. 112-9442 I [1] HOSE AS  
7. 4D-7733 [3] CLIP  
8. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
10. 142-7373 I [1] HOSE AS  
11. 8W-8528 [4] SLEEVE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24790523
 

106-4787: LINES GP-HYDRAULIC

106-4787 LINES GP-HYDRAULIC -LH
S/N 6TM1-442
4 CIRCUITS
PART OF 117-3165, 117-3171 BLADE & TIP AR-POWER
Type 1
AN ATTACHMENT
i00122995 SEBP2479
1064787 LINES GP-HYDRAULIC Parts scheme 1064787 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-0451 [1] PLATE  
2. 8T-2501 [2] BOLT (3/8-16X2-IN)  
3. 5P-5931 [1] SEAL  
4. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
5. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 135-0452 [2] PLATE  
7. 5D-2645 [3] CLAMP  
8. 9D-0953 [3] SPACER (0.406X0.75X0.88-IN THK)  
9. 108-1610 [4] CLAMP  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 8T-7008 [1] BOLT (3/8-16X3-IN)  
12. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
13. 107-8150 I [1] HOSE AS  
14. 3K-0360 [4] SEAL-O-RING  
15. 6V-8398 [1] SEAL-O-RING  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 6D-4244 [2] CLIP  
18. 8T-1296 [4] WASHER (10.5X19X3.5-MM THK)  
19. 7W-5672 [1] PIPE  
20. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
21. 6V-8397 [3] SEAL-O-RING  
22. 2G-5493 [1] CLAMP  
23. 6V-9876 [2] ELBOW  
24. 6V-8723 [1] ELBOW  
25. 9R-1183 I [1] HOSE AS  
26. 5T-9986 I [1] HOSE AS  
27. 1S-0994 [2] CLIP (LOOP)  
28. 6V-8625 [1] ELBOW  
29. 6V-8801 [2] NUT (3/8-16-THD)  
30. 3B-4628 [2] PIN-COTTER  
31. 9T-5604 Y [1] SWIVEL GP  
32. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 2A-7081 [1] GUIDE AS-HOSE  
35. 8D-9092 [1] PIN  
36. 134-0747 I [1] HOSE AS  
37. 6V-8801 [4] NUT (3/8-16-THD)  
38. 6V-8723 [2] ELBOW  
39. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
40. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
42. 8W-4193 I [1] HOSE AS  
43. 8W-4194 I [1] HOSE AS  
44. 4J-5468 [6] CLAMP  
45. 107-8144 I [2] HOSE AS  
46. 8T-0076 [1] CONNECTOR  
47. 1S-0994 [6] CLIP (LOOP)  
48. 8T-1687 [2] CONNECTOR  
49. 3K-0360 [18] SEAL-O-RING  
50. 6V-8398 [5] SEAL-O-RING  
51. 107-8149 I [2] HOSE AS  
52. 2M-9780 [2] SEAL-O-RING  
53. 6V-8624 [2] ELBOW  
54. 6V-8639 [2] CONNECTOR  
55. 6V-8634 [8] CONNECTOR  
56. 6V-8397 [15] SEAL-O-RING  
57. 107-8143 I [2] HOSE AS  
58. 6V-9876 [4] ELBOW  
59. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
60. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
61. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24790524
 

106-4787: LINES GP-HYDRAULIC

106-4787 LINES GP-HYDRAULIC -LH
S/N 6TM1-442
4 CIRCUITS
PART OF 117-3165, 117-3171 BLADE & TIP AR-POWER
Type 2
AN ATTACHMENT
i01337006 SEBP2479
1064787 LINES GP-HYDRAULIC Parts scheme 1064787 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-0451 [1] PLATE  
4. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
5. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 135-0452 [2] PLATE  
7. 5D-2645 [3] CLAMP  
8. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
9. 108-1610 [4] CLAMP  
10. 2B-0941 [3] SPACER (10.5X19X19-MM THK)  
11. 8T-7008 [1] BOLT (3/8-16X3-IN)  
13. 8T-1687 [2] CONNECTOR  
14. 3K-0360 [22] SEAL-O-RING  
15. 6V-8398 [6] SEAL-O-RING  
16. 107-8149 I [2] HOSE AS  
17. 2M-9780 [2] SEAL-O-RING  
18. 6V-8624 [2] ELBOW  
19. 6V-8639 [1] CONNECTOR  
20. 6V-8634 [8] CONNECTOR  
21. 6V-8397 [18] SEAL-O-RING  
22. 107-8143 I [2] HOSE AS  
23. 6V-9876 [6] ELBOW  
24. 6V-8723 [3] ELBOW  
25. 9R-1183 I [1] HOSE AS  
26. 5T-9986 I [1] HOSE AS  
27. 1S-0994 [8] CLIP (LOOP)  
28. 8T-0076 [1] CONNECTOR  
29. 107-8144 I [2] HOSE AS  
30. 4J-5468 [6] CLAMP  
31. 173-1011 CY [1] SWIVEL GP (CIRCLE DRIVE)  
32. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 2A-7081 [1] GUIDE AS-HOSE  
35. 8D-9092 [1] PIN  
36. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
37. 3B-4628 [2] PIN-COTTER  
38. 8W-4194 I [1] HOSE AS  
39. 8W-4193 I [1] HOSE AS  
40. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
42. 6V-8801 [6] NUT (3/8-16-THD)  
43. 134-0747 I [1] HOSE AS  
44. 6V-8625 [1] ELBOW  
45. 2G-5493 [1] CLAMP  
46. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
47. 7W-5672 [1] PIPE  
49. 6D-4244 [2] CLIP  
50. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
51. 107-8150 I [1] HOSE AS  
52. 5P-5931 BD SEAL  
53. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
54. 8T-2501 [2] BOLT (3/8-16X2-IN)  
55. 8T-1296 B [4] WASHER (10.5X19X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24790525
 

106-4787: LINES GP-HYDRAULIC

106-4787 LINES GP-HYDRAULIC -LH
S/N 6TM1-442
4 CIRCUITS
PART OF 117-3165, 117-3171 BLADE & TIP AR-POWER
Type 3
AN ATTACHMENT
i02410369 SEBP2479
1064787 LINES GP-HYDRAULIC Parts scheme 1064787 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-7081 [1] GUIDE AS-HOSE  
2. 2B-0941 [3] SPACER (10.5X19X19-MM THK)  
3. 2G-5493 [1] CLAMP  
4. 4J-5468 [6] CLAMP  
5. 5D-2645 [3] CLAMP  
6. 5T-9986 I [1] HOSE AS  
7. 8W-4193 I [1] HOSE AS  
8. 8W-4194 I [1] HOSE AS  
9. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
10. 390-8021 I [1] HOSE AS  
11. 107-8143 I [2] HOSE AS  
12. 107-8144 I [2] HOSE AS  
13. 107-8149 I [2] HOSE AS  
14. 107-8150 I [1] HOSE AS  
15. 108-1610 [4] CLAMP  
16. 134-0747 I [1] HOSE AS  
17. 135-0451 [1] PLATE  
18. 135-0452 [2] PLATE  
19. 163-4195 [1] SLEEVE  
20. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 260-6502 Y [1] SWIVEL GP (CIRCLE DRIVE)  
23. 148-8318 [8] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
24. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
25. 148-8358 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
26. 148-8363 [5] ELBOW AS  
    (EACH INCLUDES)
  6V-9876 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
27. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 148-8374 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 1S-0994 [8] CLIP (LOOP)  
30. 3B-4628 [2] PIN-COTTER  
31. 5P-1075 B [4] WASHER-HARD (10.2X22.5X3-MM THK)  
32. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
33. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
34. 6D-4244 [2] CLIP  
35. 6V-8801 [6] NUT (3/8-16-THD)  
36. 8D-9092 [1] PIN  
37. 8T-2501 [2] BOLT (3/8-16X2-IN)  
38. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
39. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
41. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
43. 8T-7008 [1] BOLT (3/8-16X3-IN)  
44. 8T-9378 [1] BOLT (3/8-16X4-IN)  
45. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
46. 5P-5931 D SEAL (0.05-M EACH)  
47. 4D-7735 [2] CLIP  
48. 6D-4246 [3] CLIP (LOOP)  
49. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
50. 8T-4133 M [2] NUT (M10X1.5-THD)  
51. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24790526
 

110-2985: LINES GP-HYDRAULIC

110-2985 LINES GP-HYDRAULIC
S/N 6TM1-442
4 CIRCUITS, RH
PART OF 112-4105 BLADE AR
i00123130 SEBP2479
1102985 LINES GP-HYDRAULIC Parts scheme 1102985 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0941 [4] SPACER (10.5X19X19-MM THK)  
2. 2G-5493 [1] CLAMP  
3. 3S-2093 [1] STRAP-CABLE  
4. 4J-5468 [3] CLAMP  
5. 5D-2645 [2] CLAMP  
6. 5D-4988 [4] CLAMP  
7. 5P-0599 [1] CLAMP-BAND  
8. 8W-0302 I [1] HOSE AS  
9. 9R-8870 [1] BLOCK  
10. 107-8147 I [1] HOSE AS  
11. 107-8148 I [1] HOSE AS  
12. 107-8150 I [1] HOSE AS  
13. 108-1610 [2] CLAMP  
14. 110-3003 I [1] HOSE AS  
15. 134-0747 I [1] HOSE AS  
16. 135-0450 [2] PLATE  
17. 135-0453 [1] PLATE  
18. 163-4195 [1] SLEEVE  
19. 164-5605 [3] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-0076 [1] CONNECTOR  
20. 164-5608 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
21. 100-4336 [1] CLIP  
22. 377-9303 I [1] HOSE AS  
23. 107-8141 I [1] HOSE AS  
24. 377-9304 I [1] HOSE AS  
25. 148-8318 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
26. 148-8363 [3] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9876 [1] ELBOW  
27. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
28. 148-8374 [4] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
29. 148-8383 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1683 [1] ELBOW  
30. 148-8433 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
31. 1S-0994 [6] CLIP (LOOP)  
32. 4L-6454 [1] BOLT (3/8-16X1-IN)  
33. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
34. 5S-7379 [10] BOLT (3/8-16X0.875-IN)  
35. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
36. 6D-4244 [2] CLIP  
37. 6V-8801 [3] NUT (3/8-16-THD)  
38. 7X-0288 [2] BOLT (3/8-16X1.625-IN)  
39. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
41. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 8T-9378 [1] BOLT (3/8-16X4-IN)  
43. 8W-0220 I [1] HOSE AS  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
45. 5P-5931 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24790527
 

114-0025: LINES GP-HYDRAULIC

114-0025 LINES GP-HYDRAULIC -BULLDOZER LIFT, PLOW, LH
S/N 6TM1-442
AN ATTACHMENT
i00481588 SEBP2479
1140025 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
2. 100-4336 [1] CLIP  
3. 114-0027 I [2] HOSE AS  
4. 148-8318 [1] CONNECTOR AS  
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24790528
 

115-8078: LINES GP-HYDRAULIC

115-8078 LINES GP-HYDRAULIC
S/N 6TM1-442
2 CIRCUITS LH
PART OF 112-4105 BLADE AR
i00123416 SEBP2479
1158078 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5493 [1] CLAMP  
2. 4J-5468 [8] CLAMP  
3. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
4. 107-8149 I [2] HOSE AS  
5. 107-8150 I [1] HOSE AS  
6. 134-0747 I [1] HOSE AS  
7. 135-0451 [1] PLATE  
8. 135-0452 [2] PLATE  
9. 163-4195 [1] SLEEVE  
10. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
11. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
12. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
13. 148-8358 [2] ELBOW AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8624 [1] ELBOW  
14. 148-8363 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9876 [1] ELBOW  
15. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
16. 1S-0994 [2] CLIP (LOOP)  
17. 5P-1075 B [4] WASHER-HARD (10.2X22.5X3-MM THK)  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
19. 6D-4244 [2] CLIP  
20. 6V-8801 [2] NUT (3/8-16-THD)  
21. 7X-0289 [4] BOLT (3/8-16X1.875-IN)  
22. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-9378 [1] BOLT (3/8-16X4-IN)  
24. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
25. 5P-5931 D SEAL (0.05-M EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24790529
 

117-3855: LINES GP-HYDRAULIC

117-3855 LINES GP-HYDRAULIC
S/N 6TM1-442
3 CIRCUITS, LH
PART OF 117-3163, 117-3536 BLADE AR
Type 1
AN ATTACHMENT
i00123584 SEBP2479
1173855 LINES GP-HYDRAULIC Parts scheme 1173855 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-0451 [1] PLATE  
2. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
3. 5P-0810 [1] SEAL  
4. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
5. 8T-4896 [19] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 135-0452 [2] PLATE  
7. 5D-2645 [3] CLAMP  
8. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
9. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
10. 8T-7008 [1] BOLT (3/8-16X3-IN)  
11. 8T-2501 [2] BOLT (3/8-16X2-IN)  
12. 8T-1687 [2] CONNECTOR  
13. 3K-0360 [14] SEAL-O-RING  
14. 6V-8398 [6] SEAL-O-RING  
15. 107-8149 I [2] HOSE AS  
16. 2M-9780 [2] SEAL-O-RING  
17. 6V-8624 [2] ELBOW  
18. 6V-8639 [1] CONNECTOR  
19. 6V-8634 [6] CONNECTOR  
20. 6V-8397 [10] SEAL-O-RING  
21. 6V-9876 [3] ELBOW  
22. 1S-0994 [6] CLIP (LOOP)  
23. 8T-0076 [1] CONNECTOR  
24. 107-8144 I [2] HOSE AS  
25. 4J-5468 [8] CLAMP  
26. 9T-5604 Y [1] SWIVEL GP  
27. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
28. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 2A-7081 [1] GUIDE AS-HOSE  
30. 8D-9092 [1] PIN  
31. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
32. 3B-4628 [2] PIN-COTTER  
33. 8W-4194 I [1] HOSE AS  
34. 8W-4193 I [1] HOSE AS  
35. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
36. 107-8150 I [1] HOSE AS  
37. 6V-8801 [6] NUT (3/8-16-THD)  
38. 134-0747 I [1] HOSE AS  
39. 6V-8625 [1] ELBOW  
40. 2G-5493 [1] CLAMP  
41. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
42. 7W-5672 [1] PIPE  
43. 8T-1296 [4] WASHER (10.5X19X3.5-MM THK)  
44. 6D-4244 [2] CLIP  
45. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H :

CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-LIFT
132-4926 CYLINDER GP-LIFT
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
LINES GP-CENTERSHIFT LOCK
142-7379 LINES GP-CENTERSHIFT LOCK
LINES GP-HYDRAULIC
106-4787 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
106-4787 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
106-4787 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
110-2985 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
114-0025 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
115-8078 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.