AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-8657 TURBOCHARGER GP S/N 6NC1-UP; R6J1-UP; 08Z90000-99999 PART OF 110-1607 ENGINE AR 140H MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
PUMP GP-FUEL INJECTION

MOTOR GRADER 140H MOTOR GRADER 8JM
 140H Motor Grader 8JM00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2482 140H 8JM   (1996)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
7E-5683 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
7C-9309 CARTRIDGE GP-TURBOCHARGER
391-8205 KIT-TURBOCHARGER GASKET
393-1181 KIT-TURBOCHARGER GASKET
TURBOCHARGER GP
7C-8632 TURBOCHARGER GP
TURBOCHARGER GP
7C-8657 TURBOCHARGER GP
 

#SEBP24820100
 

7C-8657: TURBOCHARGER GP

7C-8657 TURBOCHARGER GP
S/N 6NC1-UP; R6J1-UP; 08Z90000-99999
PART OF 110-1607 ENGINE AR
i00122286 SEBP2482
7C8657 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8632 Y [1] TURBOCHARGER GP  
2. 1P-0451 [1] GASKET  
3. 9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
5. 7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24820101
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 8JM1-295
ENGINE
PART OF 112-4113 CHASSIS AR
i00540777 SEBP2482
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [4] BEARING-ROLLER  
3. 9D-0145 [1] LEVER  
4. 8X-3123 [1] SHAFT  
5. 1B-8704 [6] KEY-WOODRUFF  
6. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
7. 4D-4895 [2] LEVER  
8. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
9. 6V-8801 [8] NUT (3/8-16-THD)  
10. 8X-3593 [1] BRACKET AS  
11. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
13. 8X-3124 [1] SHAFT  
14. 8X-3261 [1] LEVER  
15. 8X-2500 [1] PEDAL-GOVERNOR CONTROL (ACCELERATOR)  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
19. 4J-8922 [3] ROD END (3/8-24-THD)  
20. 3S-2713 [4] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [3] PIN  
22. 7V-0446 [3] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 8X-3122 [1] LINK AS  
33. 7H-3641 [5] END-ROD (5/16-24-THD)  
34. 6V-8186 [5] NUT-FULL (5/16-24-THD)  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [4] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
39. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 4D-4064 [1] ROD END (3/8-24-THD)  
44. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
45. 5S-7383 [5] BOLT (3/8-16X1.75-IN)  
46. 112-9164 [3] BOOT  
47. 164-3562 [1] CONTROL  
48. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
49. 8X-2953 [1] PLATE  
50. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
51. 8X-2956 [1] LEVER AS  
52. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
53. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
54. 8X-3121 [1] ROD  
55. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
56. 3D-9609 [1] ROD END  
57. 1A-2457 [1] PIN-CLEVIS  
58. 3B-4607 [1] PIN-COTTER  
59. 8X-2496 [1] HOUSING  
60. 8T-2604 [1] SEAL-LIP TYPE  
61. 4M-6425 [2] BOLT (5/16-18X1-IN)  
62. 2V-7859 [1] BEARING  
63. 8X-8299 [1] LEVER  
64. 8C-9586 [1] CABLE AS  
  6F-0253 [4] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  9S-1354 [4] NUT (5/8-18-THD)  
65. 6L-7751 [1] ROD END  
66. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
67. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 5P-7704 [1] ROD END  
69. 8X-2952 [1] GASKET  
70. 8X-2954 [1] COVER  
71. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
72. 8D-9974 [1] GASKET  
73. 8D-9969 [1] COVER  
74. 4L-6454 [7] BOLT (3/8-16X1-IN)  
75. 1V-6341 [2] SEAL (30.15MM OD)  
76. 6V-8187 [2] NUT (1/4-28-THD)  
77. 5B-1866 [1] PLUG-CUP  
78. 8W-8909 [3] SLEEVE  
79. 8X-7740 [1] CLIP  
80. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
81. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
82. 9G-9154 [1] CLIP  
83. 6V-8185 [2] NUT (1/4-20-THD)  
84. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
85. 8T-8908 [1] BOLT (1/4-20X1-IN)  
86. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
87. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
88. 2N-9421 [2] SPRING-DISC  
  M   METRIC PART
 

#SEBP24820102
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 8JM1-UP
ENGINE
PART OF 112-4113 CHASSIS AR
i01273616 SEBP2482
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [4] BEARING-ROLLER  
3. 9D-0145 [1] LEVER  
4. 8X-3123 [1] SHAFT  
5. 1B-8704 [6] KEY-WOODRUFF  
6. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
7. 4D-4895 [2] LEVER  
8. 8H-0708 [1] BOLT (1/4-20X0.5-IN)  
9. 6V-8801 C [9] NUT (3/8-16-THD)  
10. 8X-3593 [1] BRACKET AS  
11. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
13. 8X-3124 [1] SHAFT  
14. 8X-3261 [1] LEVER  
15. 207-4927 [1] PEDAL-GOVERNOR CONTROL (ACCELERATOR)  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
19. 4J-8922 C [2] ROD END (3/8-24-THD)  
20. 3S-2713 C [3] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [3] PIN  
22. 7V-0446 [3] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 C [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 8X-3122 [1] LINK AS  
33. 7H-3641 [5] END-ROD (5/16-24-THD)  
34. 6V-8186 [5] NUT-FULL (5/16-24-THD)  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [4] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
39. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 4D-4064 [1] ROD END (3/8-24-THD)  
44. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
45. 5S-7383 [5] BOLT (3/8-16X1.75-IN)  
46. 112-9164 [3] BOOT  
47. 164-3562 [1] CONTROL  
48. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
49. 8X-2953 [1] PLATE  
50. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
51. 8X-2956 [1] LEVER AS  
52. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
53. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
54. 8X-3121 [1] ROD  
55. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
56. 3D-9609 [1] ROD END  
57. 1A-2457 [1] PIN-CLEVIS  
58. 3B-4607 [1] PIN-COTTER  
59. 8X-2496 [1] HOUSING  
60. 8T-2604 [1] SEAL-LIP TYPE  
61. 4M-6425 [2] BOLT (5/16-18X1-IN)  
62. 2V-7859 [1] BEARING  
63. 8X-8299 [1] LEVER  
64. 8C-9586 [1] CABLE AS  
  6F-0253 [4] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  9S-1354 [4] NUT (5/8-18-THD)  
65. 6L-7751 [1] ROD END  
66. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
67. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 5P-7704 [1] ROD END  
69. 8X-2952 [1] GASKET  
70. 8X-2954 [1] COVER  
71. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
72. 8D-9974 [1] GASKET  
73. 8D-9969 [1] COVER  
74. 4L-6454 [7] BOLT (3/8-16X1-IN)  
75. 1V-6341 [2] SEAL  
76. 6V-8187 [2] NUT (1/4-28-THD)  
77. 5B-1866 [1] PLUG-CUP  
78. 8W-8909 C [2] SLEEVE  
79. 033-8248 C [1] CLIP (LOOP)  
80. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
81. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
82. 9G-9154 [1] CLIP  
83. 6V-8185 [2] NUT (1/4-20-THD)  
84. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
85. 8T-8908 [1] BOLT (1/4-20X1-IN)  
86. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
87. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
88. 2N-9421 [2] SPRING-DISC  
89. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
90. 2P-8886 C [1] LEG  
91. 5M-3062 C [1] BOLT (3/8-16X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24820103
 

1W-2481: COVER GP-TACHOMETER DRIVE

1W-2481 COVER GP-TACHOMETER DRIVE
S/N 6NC1-UP; R6J1-UP; 08Z90000-99999
PART OF 110-1607 ENGINE AR
i00121977 SEBP2482
1W2481 COVER GP-TACHOMETER DRIVE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7629 [1] COVER  
2. 4M-8303 [1] SEAL-O-RING  
3. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
4. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP24820104
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 6NC1-UP; R6J1-UP; 08Z90000-99999
PART OF 117-4945 PUMP GP-GOV & FUEL INJ
i00122287 SEBP2482
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24820105
 

6I-1370: FILTER GP-PRIMARY FUEL

6I-1370 FILTER GP-PRIMARY FUEL
S/N 8JM1-295
PART OF 8W-6265 LINES GP-FUEL
i00122197 SEBP2482
6I1370 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1628 [1] NUT (3/8-24-THD)  
2. 2J-0157 [1] SEAL-O-RING  
3. 1L-3769 [1] RING-RETAINING  
4. 8H-2778 [1] SEAL-RING (PRIMARY FUEL FILTER)  
5. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 2H-3429 [1] RING-RETAINING  
8. 7S-9323 [1] SPRING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 2W-6688 [1] BASE AS-FUEL FILTER  
  7E-5346 [1] VALVE AS  
  8N-6199 [1] BASE-PUMP & FILTER  
11. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP24820106
 

2W-3282: FILTER GP-SECONDARY FUEL

2W-3282 FILTER GP-SECONDARY FUEL
S/N 6NC1-UP; R6J1-UP; 08Z90000-99999
PART OF 110-1607 ENGINE AR
i00122038 SEBP2482
2W3282 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG (1/8-27 PTF)  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS  
6. 030-7947 [1] ADAPTER-ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 5P-4289 [1] ELBOW  
11. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24820107
 

2W-2410: GOVERNOR GP

2W-2410 GOVERNOR GP
S/N 6NC1-UP; R6J1-UP; 08Z90000-99999
PART OF 117-4945 PUMP GP-GOV & FUEL INJ
i00122036 SEBP2482
2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG  
2. 8N-3259 C [1] COVER-HIGH IDLE  
3. 7N-2594 C [2] SETSCREW-SLOTTED  
4. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
5. 3J-7354 C [1] SEAL-O-RING  
6. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
6A. 4N-5485 C [1] BODY-VALVE  
6B. 6H-9691 C [1] SEAL-O-RING  
6C. 4N-5484 C [1] VALVE-NEEDLE  
6D. 5F-9144 C [1] SEAL-O-RING  
8. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
9. 7N-8780 C [1] COVER AS-CONTROL  
9A. 138-9507 C [1] SEAL-LIP TYPE  
10. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
11. 150-3728 C [1] GASKET  
12. 3P-0009 C [1] INSULATOR  
13. 1P-2497 C [2] BOLT-HEAD (10-24X1-IN)  
14. 8N-3258 C [1] COVER-LOAD STOP  
15. 6D-3897 [1] BOLT (8-32X0.5-IN)  
16. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
17. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
18. 1W-4243 [1] SPRING-BUMPER  
19. 8N-2488 [1] BOLT-LOAD STOP  
20. 8N-3256 [1] COLLAR-LOAD STOP  
21. 8L-5832 [1] NUT-HEX (10-32-THD)  
22. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
23. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
24. 1N-3800 [1] SLEEVE-RACK CONTROL  
25. 6N-3504 [1] SEAT-GOVERNOR SPRING  
26. 2W-2216 [1] SPRING-LINK  
27. 2M-7819 [2] RING-RETAINING  
28. 1N-3802 [1] SEAT-SPRING  
29. 8N-2507 [1] PISTON AS-SERVO  
  7C-0791 [1] CYLINDER AS  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
29A. 8N-2505 [1] VALVE-GOVERNOR SERVO  
29B. 7W-0250 C [1] SLEEVE  
29C. 5P-9757 [1] SEAL-O-RING  
30. 8N-3168 C [1] LEVER-THROTTLE  
31. 2W-6102 C [1] LEVER-SPRING SEAT  
32. 2W-7400 C [1] SPRING  
33. 8N-3087 C [1] STOP-IDLE DETENT  
34. 4N-2953 [1] RING-LOCK  
35. 7E-4892 [2] RACE-THRUST BEARING  
36. 7M-7219 [1] BEARING-THRUST  
37. 4W-6868 [1] RISER-GOVERNOR  
38. 2N-0828 [2] WASHER  
39. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (7.78MM OD X 12.7MM LONG)  
  4F-6024 [2] PIN (6.193MM OD X 8.0MM LONG)  
40. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  7N-7268 [1] SEAT-SPRING  
41. 4N-6408 [1] PISTON AS  
41A. 4N-6404 [1] RING-RETAINING  
41B. 4N-6406 [1] RING-SPACER  
41C. 4N-6407 [1] SPOOL-DASHPOT  
42. 7N-8785 C [1] SHAFT-PIVOT  
43. 150-3730 C [1] GASKET  
44. 7N-7270 C [2] SLEEVE-SPRING  
45. 7N-8821 C [3] RING-RETAINING  
46. 3K-5733 C [1] SPRING  
47. 8N-2501 C [1] HOUSING AS-GOVERNOR  
  8N-3945 [1] BUSHING-TERMINAL  
  7E-5346 [1] VALVE AS (FUEL CHECK)  
47A. 8N-2499 C [1] SPRING-GUIDE  
47B. 3D-8317 C [1] RING-RETAINING  
47C. 4N-0260 C [1] SEAL-LIP TYPE  
47D. 2F-2290 C [1] PLUG-CORE  
52. 2W-9305 C [2] PLATE-THROTTLE  
53. 4N-0432 C [1] BALL BEARING  
55. 7N-2171 C [4] RING-RETAINING  
56. 7N-2172 C [2] PIN  
57. 6I-2003 C [1] GASKET  
58. 7N-8775 C [1] NUT-HIGH IDLE  
59. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
60. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
61. 6I-2004 C [1] GASKET  
62. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24820108
 

397-3971: KIT-FUEL INJECTION PUMP

397-3971 KIT-FUEL INJECTION PUMP
S/N 8JM1-UP
OPTIONAL FUEL PUMP REBUILD KIT FOR 3306 MACHINE ENGINE
FIELD INSTALLATION
i04944111 SEBP2482
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4P-9827 Y [6] PUMP GP-FUEL INJECTION  
   
  4N-0432 [1] BALL BEARING  
  1S-1953 [1] BEARING-RACK  
  1W-3285 [1] BEARING-RACK  
  7L-3326 [1] BEARING-THRUST  
  7M-7219 [1] BEARING-THRUST  
  4P-9828 [1] BUSHING  
  7N-7970 [1] BUSHING  
  8N-3945 [1] BUSHING-TERMINAL  
  8N-5117 [6] BUSHING-TERMINAL  
  5F-2807 [6] CAP-SEALING  
  6I-1564 [1] DIAPHRAGM  
  1S-5440 [4] DOWEL  
  4N-9019 [1] DOWEL  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  3P-0009 [1] INSULATOR  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
  7N-2172 [2] PIN  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7E-4892 [2] RACE-THRUST BEARING  
  7N-7166 [2] RACE-THRUST BEARING  
  4N-2953 [1] RING-LOCK  
  2M-7819 [2] RING-RETAINING  
  3D-8317 [1] RING-RETAINING  
  7N-2171 [4] RING-RETAINING  
  7N-8421 [1] RING-RETAINING  
  7N-8821 [3] RING-RETAINING  
  8F-4610 [1] RING-RETAINING  
  8N-6680 [1] SCREEN AS  
  8N-5763 [1] SEAL  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  2D-6392 [1] SEAL-O-RING  
  175-7900 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  196-1804 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  317-0808 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  6N-3504 [1] SEAT-GOVERNOR SPRING  
  8N-3088 [1] SHAFT AS-THROTTLE  
  8N-2510 [1] SHAFT-WEIGHT CARRIER  
  7W-0250 [1] SLEEVE  
  4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
  2N-2878 [1] SPRING  
  2W-7400 [1] SPRING  
  3K-5733 [1] SPRING  
  7L-8056 [1] SPRING  
  8L-9790 [1] SPRING  
  8M-9140 [1] SPRING  
  8M-9141 [1] SPRING  
  8N-9594 [1] SPRING  
  9N-1754 [1] SPRING  
  7L-4958 [1] SPRING-GOVERNOR  
  8N-2499 [1] SPRING-GUIDE  
  7E-5346 [1] VALVE AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  2N-0828 [2] WASHER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  7N-7264 [4] WEIGHT-GOVERNOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24820109
 

397-6206: KIT-FUEL INJECTION PUMP

397-6206 KIT-FUEL INJECTION PUMP
S/N 8JM1-UP
OPTIONAL REBUILD KIT FOR MACHINE ENGINE 3306 FUEL PUMP
FOR USE WITH @@@@@110-1607@@@@@
FIELD INSTALLATION
i04943338 SEBP2482
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-5928 Y [6] PUMP GP-FUEL INJECTION  
   
  4N-0432 [1] BALL BEARING  
  417-4499 [1] BALL BEARING  
  1S-1953 [1] BEARING-RACK  
  1W-3285 [1] BEARING-RACK  
  7L-3326 [1] BEARING-THRUST  
  7M-7219 [1] BEARING-THRUST  
  384-4816 [1] BEARING-THRUST  
  4P-9828 [1] BUSHING  
  7N-7970 [1] BUSHING  
  374-8360 [1] BUSHING  
  8N-3945 [1] BUSHING-TERMINAL  
  8N-5117 [6] BUSHING-TERMINAL  
  5F-2807 [6] CAP-SEALING  
  6I-1564 [1] DIAPHRAGM  
  1S-5440 [4] DOWEL  
  4N-9019 [1] DOWEL  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  3P-0009 [1] INSULATOR  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
  7N-2172 [2] PIN  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7E-4892 [2] RACE-THRUST BEARING  
  384-5941 [1] RACE  
  7N-7166 [2] RACE-THRUST BEARING  
  417-4531 [1] RACE  
  4N-2953 [1] RING-LOCK  
  2M-7819 [2] RING-RETAINING  
  3D-8317 [1] RING-RETAINING  
  7N-2171 [4] RING-RETAINING  
  7N-8421 [1] RING-RETAINING  
  7N-8821 [3] RING-RETAINING  
  8F-4610 [1] RING-RETAINING  
  8N-6680 [1] SCREEN AS (FUEL INJECTION PUMP)  
  8N-5763 [1] SEAL  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  2D-6392 [1] SEAL-O-RING  
  2H-3934 [1] SEAL-O-RING  
  3E-6760 [1] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  033-5879 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  6N-3504 [1] SEAT-GOVERNOR SPRING  
  8N-3088 [1] SHAFT AS-THROTTLE  
  8N-2510 [1] SHAFT-WEIGHT CARRIER  
  [1] SHAFT  
  7W-0250 [1] SLEEVE  
  4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
  417-4534 [1] SHIM  
  2N-2878 [1] SPRING  
  2W-7400 [1] SPRING  
  3K-5733 [1] SPRING  
  7L-8056 [1] SPRING  
  8L-9790 [1] SPRING  
  8M-9140 [1] SPRING  
  8M-9141 [1] SPRING  
  8N-9594 [1] SPRING  
  9N-1754 [1] SPRING  
  7L-4958 [1] SPRING-GOVERNOR  
  8N-2499 [1] SPRING-GUIDE  
  7E-5346 [1] VALVE AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  2N-0828 [2] WASHER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  7N-7264 [4] WEIGHT-GOVERNOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Disassembly and Assembly
Turbocharger - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22

Caterpillar Parts SIS Catalog 140H :

TURBOCHARGER GP
7C-8632 TURBOCHARGER GP
MUFFLER GP
7C-2097 MUFFLER GP
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
134-4208 MANIFOLD GP-EXHAUST
LINES GP-AIR
7C-2094 LINES GP-AIR
LINES GP-AIR
111-8007 LINES GP-AIR
393-1181 KIT-TURBOCHARGER GASKET
391-8205 KIT-TURBOCHARGER GASKET
CONTROL GP-GOVERNOR
8W-4742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-4742 CONTROL GP-GOVERNOR
COVER GP-TACHOMETER DRIVE
1W-2481 COVER GP-TACHOMETER DRIVE
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
FILTER GP-PRIMARY FUEL
6I-1370 FILTER GP-PRIMARY FUEL
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
GOVERNOR GP
2W-2410 GOVERNOR GP
397-3971 KIT-FUEL INJECTION PUMP

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.