WORK TOOLS
BLADE GPFRAME AND BODY
BUMPER GPCASE & FRAME GP
ENCLOSURE GP
FRAME GP
GUARD GP
WORK TOOLS
BLADE GP
#SEBP24820410
9D-6425: BRACKET GP-BLADE
9D-6425 BRACKET GP-BLADE
S/N 8JM1-UP
PART OF 117-3163, 117-3536 BLADE AR
AN ATTACHMENT
S/N 8JM1-UP
PART OF 117-3163, 117-3536 BLADE AR
AN ATTACHMENT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-1753 | [1] | BRACKET-RAIL (RH) | |
| 2. | 6H-1717 | [24] | BOLT (1/2-13X1.125-IN) | |
| 3. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 5T-8366 | [4] | STRIP-WEAR | |
| 5. | 8W-1749 | [8] | PLATE | |
| 6. | 8D-5949 | [1] | BAR-SPREADER | |
| 7. | 7X-0452 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 8. | 8W-1752 | [1] | BRACKET-RAIL (LH) | |
| 9. | 2G-3221 B | [4] | SHIM (1.6-MM THK) | |
| 2G-3219 B | [4] | SHIM (0.8-MM THK) | ||
| 10. | 2K-0419 B | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| B | USE AS REQUIRED | |||
#SEBP24820411
131-3221: BUMPER GP-REAR
For full view, you need register
#SEBP24820412
132-8477: BUMPER GP-REAR
For full view, you need register
#SEBP24820413
8W-5470: CASE & FRAME GP
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 2R-1600 | [38] | STUD-TAPERLOCK | |
| 3. | 2A-3398 | [1] | GASKET | |
| 4. | 8M-3837 | [1] | PLUG-MAGNETIC | |
| 5. | 2D-5238 | [12] | STUD-TAPERLOCK (5/8-11X2.5-IN) | |
| 6. | 4D-8148 | [1] | DOWEL | |
| 8. | 8W-5501 | [1] | CASE & FRAME AS | |
| 9. | 9G-5742 | [5] | BOSS (3/8-16-THD) | |
| 10. | 8D-1059 | [2] | BLOCK | |
| 11. | 3T-0049 | [3] | CLIP | |
| 12. | 9K-3050 | [2] | STUD-WELD | |
| 13. | 7T-1099 | [1] | LINK | |
| 14. | 8D-3508 | [1] | BOSS (3/8-16X1-IN) | |
| 15. | 5D-9077 | [4] | BOSS (3/8-16-THD) | |
| 16. | 9G-9155 | [4] | CLIP | |
| 17. | 4D-6293 | [1] | BOSS (3/8-16X1.31-IN) | |
| 18. | 9P-5391 | [2] | BLOCK | |
| 19. | 8V-6808 | [2] | BLOCK |
#SEBP24820414
113-5759: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [61] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [67] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 144-5724 | [1] | DASH AS | |
| 4. | 7I-4943 | [1] | DOOR AS (RH) | |
| 5. | 7I-4945 | [1] | DOOR AS (LH) | |
| 6. | 140-6131 | [1] | PLATE AS | |
| 7. | 140-6133 | [1] | PLATE AS | |
| 8. | 7I-4983 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 9F-2978 | [1] | NUT-WELD (3/8-16-THD) | ||
| 9. | 8N-7837 | [8] | PLATE AS | |
| 10. | 7I-4979 | [2] | HINGE AS | |
| 11. | 7I-4981 | [2] | HINGE AS | |
| 12. | 7I-4959 | [4] | BRACKET-HINGE | |
| 13. | 106-9087 | [1] | FILM-STRIPE (LH) | |
| 14. | 134-0165 | [6] | WASHER (13.8X45X3-MM THK) | |
| 15. | 8D-3786 | [4] | MOUNTING | |
| 16. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 17. | 7X-0550 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 18. | 7I-4985 | [2] | PLATE | |
| 19. | 144-5725 | [1] | PLATE | |
| 20. | 7I-4995 | [2] | HANDRAIL | |
| 21. | 8X-5155 | [2] | PLATE | |
| 22. | 8X-5156 | [2] | HANDHOLD | |
| 23. | 3T-5763 | [2] | BUMPER | |
| 24. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 26. | 7I-4965 | [1] | BRACKET AS (LH) | |
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 27. | 7I-4963 | [1] | BRACKET AS (RH) | |
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 28. | 246-2641 | [2] | PADLOCK GP (ENGINE ENCLOSURE) | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [2] | KEY | ||
| 29. | 9V-0450 | [2] | PIN | |
| 30. | 7P-7975 | [2] | LATCH | |
| 31. | 156-6793 | [2] | SPRING-LATCH | |
| 32. | 6L-3966 | [2] | PIN | |
| 33. | 7X-1387 | [6] | WASHER (10.26X22.22X1.9-MM THK) | |
| 34. | 3B-4615 | [6] | PIN-COTTER | |
| 35. | 3V-0613 | [4] | BUMPER | |
| 36. | 7I-4960 | [2] | HINGE AS | |
| 37. | 7I-4982 | [2] | HINGE AS | |
| 38. | 7I-4948 | [1] | DOOR AS (RH) | |
| 39. | 9V-0344 | [2] | PIN (LATCH STRIKER) | |
| 40. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 41. | 7I-4966 | [1] | HOOD AS | |
| 42. | 7I-4952 | [1] | DOOR AS (LH) | |
| 43. | 5P-2424 | [4] | BOLT (1/2-13X2.25-IN) | |
| 44. | 135-7101 | [2] | BRACKET | |
| 45. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 46. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 47. | 113-9517 | [2] | HANDRAIL | |
| 48. | 113-8457 | [2] | ROD | |
| 49. | 5P-8439 | [2] | GROMMET | |
| 50. | 113-2536 | [1] | COVER | |
| 51. | 9N-1995 | [7] | RIVET-POP | |
| 52. | 135-7099 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | NUT-WELD (3/8-16-THD) | |||
| 53. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
| 54. | 106-3789 | [1] | FILM-STRIPE (RH) | |
| 55. | 106-9107 | [2] | FILM-STRIPE (CAT) | |
| 56. | 106-3788 | [2] | FILM-STRIPE (CAT) | |
| 57. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 58. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 59. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 60. | 156-7033 | [2] | PLATE AS | |
| 61. | 7U-4898 | [4] | SCREW (3/8-16X0.75-IN) | |
#SEBP24820415
113-5759: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [61] | BOLT (3/8-16X1-IN) | |
| 2. | 5P-1075 | [67] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 144-5724 | [1] | DASH AS | |
| 4. | 7I-4943 | [1] | DOOR AS (RH) | |
| 7P-7304 | [1] | BRACKET | ||
| 8G-0871 | [1] | HANDLE | ||
| 9V-0453 | [1] | BUSHING-TERMINAL | ||
| 5. | 7I-4945 | [1] | DOOR AS (LH) | |
| 7P-7304 | [1] | BRACKET | ||
| 8G-0871 | [1] | HANDLE | ||
| 9V-0453 | [1] | BUSHING-TERMINAL | ||
| 6. | 140-6131 | [1] | PLATE AS | |
| 7. | 140-6133 | [1] | PLATE AS | |
| 8. | 7I-4983 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 9. | 8N-7837 | [8] | PLATE AS | |
| 10. | 7I-4979 | [2] | HINGE AS | |
| 11. | 7I-4981 | [2] | HINGE AS | |
| 12. | 7I-4959 | [4] | BRACKET-HINGE | |
| 13. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 14. | 134-0165 | [6] | WASHER (13.8X45X3-MM THK) | |
| 15. | 8D-3786 | [4] | MOUNTING | |
| 16. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 17. | 7X-0550 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 18. | 7I-4985 | [2] | PLATE | |
| 19. | 216-8338 C | [1] | PLATE | |
| 20. | 7I-4995 | [2] | HANDRAIL | |
| 21. | 8X-5155 | [2] | PLATE | |
| 22. | 8X-5156 | [2] | HANDHOLD | |
| 23. | 3T-5763 | [2] | BUMPER | |
| 24. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 26. | 7I-4965 | [1] | BRACKET AS (LH) | |
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 27. | 7I-4963 | [1] | BRACKET AS (RH) | |
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 28. | 246-2641 | [2] | PADLOCK GP (ENGINE ENCLOSURE) | |
| 5P-8500 | [2] | KEY | ||
| 29. | 9V-0450 | [2] | PIN | |
| 30. | 7P-7975 | [2] | LATCH | |
| 31. | 156-6793 | [2] | SPRING-LATCH | |
| 32. | 6L-3966 | [2] | PIN | |
| 33. | 7X-1387 | [6] | WASHER (10.26X22.22X1.9-MM THK) | |
| 34. | 3B-4615 | [6] | PIN-COTTER | |
| 35. | 3V-0613 | [4] | BUMPER | |
| 36. | 7I-4960 | [2] | HINGE AS | |
| 37. | 7I-4982 | [2] | HINGE AS | |
| 38. | 7I-4948 | [1] | DOOR AS (RH) | |
| 2M-4009 | [2] | PLUG-BUTTON | ||
| 7I-4949 | [2] | TUBE | ||
| 39. | 9V-0344 | [2] | PIN (LATCH STRIKER) | |
| 40. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 41. | 7I-4966 | [1] | HOOD AS | |
| 42. | 7I-4952 | [1] | DOOR AS (LH) | |
| 43. | 5P-2424 | [4] | BOLT (1/2-13X2.25-IN) | |
| 44. | 135-7101 | [2] | BRACKET | |
| 45. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 46. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 47. | 113-9517 | [2] | HANDRAIL | |
| 48. | 113-8457 | [2] | ROD | |
| 49. | 5P-8439 | [2] | GROMMET | |
| 50. | 113-2536 | [1] | COVER | |
| 51. | 9N-1995 | [7] | RIVET-POP | |
| 52. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 53. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
| 54. | 106-3789 | [1] | FILM-STRIPE (RH)(ENGINE ENCLOSURE) | |
| 55. | 106-9107 | [2] | FILM-STRIPE (CAT)(ENGINE ENCLOSURE) | |
| 56. | 106-3788 | [2] | FILM-STRIPE (CAT)(ENGINE ENCLOSURE) | |
| 57. | 106-9087 | [1] | FILM-STRIPE (LH)(ENGINE ENCLOSURE) | |
| 58. | 135-7099 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | NUT-WELD (3/8-16-THD) | |||
| 59. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 60. | 156-7033 | [2] | PLATE AS | |
| 61. | 7U-4898 | [4] | SCREW (3/8-16X0.75-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24820416
141-2995: FRAME GP-FRONT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-2994 | [1] | FRAME AS | |
| 2. | 9D-9257 | [1] | PIN | |
| 3. | 8D-3791 | [1] | PIN | |
| 4. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 5. | 8D-9159 | [4] | BUSHING | |
| 6. | 9D-6589 | [8] | SEAL-LIP TYPE | |
| 7. | 9D-3311 | [1] | BUSHING | |
| 8. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 9. | 8X-3200 | [1] | PLATE AS | |
| 10. | 5P-1075 | [27] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 111-3945 | [2] | PLATE | |
| 12. | 145-5968 | [1] | COVER (RH) | |
| 13. | 145-5969 | [1] | COVER (LH) | |
| 14. | 5P-8167 | [3] | BOLT (3/8-16X0.625-IN) | |
| 15. | 5M-3062 | [20] | BOLT (3/8-16X0.75-IN) | |
| 16. | 6K-4076 | [1] | BUSHING | |
| 17. | 144-2161 | [1] | PLATE | |
| 18. | 144-2162 | [1] | INSULATION | |
| 19. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 144-7620 B | [2] | TAPE | |
| 21. | 5P-5969 BD | SEAL | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP24820417
8W-6248: FRAME GP-FRONT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-7289 | [1] | PLATFORM & FRAME AS | |
| 2. | 5P-1075 | [27] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 5M-3062 | [20] | BOLT (3/8-16X0.75-IN) | |
| 4. | 111-3945 | [2] | PLATE | |
| 5. | 110-7004 | [1] | COVER | |
| 6. | 110-7005 | [1] | COVER | |
| 7. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 8. | 8X-3200 | [1] | PLATE AS | |
| 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7D-1151 | [1] | BLOCK | ||
| 8G-0452 | [6] | LUG (3/8-16-THD) | ||
| 9. | 8D-3791 | [1] | PIN | |
| 10. | 9D-9257 | [1] | PIN | |
| 11. | 8D-9159 | [4] | BUSHING | |
| 12. | 9D-6589 | [8] | SEAL-LIP TYPE | |
| 13. | 9D-3311 | [1] | BUSHING | |
| 14. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 15. | 5P-8167 | [3] | BOLT (3/8-16X0.625-IN) | |
| 16. | 6K-4076 | [1] | BUSHING |
#SEBP24820418
140-7616: GUARD & SUPPORT GP-RADIATOR
140-7616 GUARD & SUPPORT GP-RADIATOR
S/N 8JM270-295
PART OF 112-4113 CHASSIS AR
S/N 8JM270-295
PART OF 112-4113 CHASSIS AR
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 138-3760 | [1] | SUPPORT AS | |
| 1F-0750 | [48] | NUT-WELD (3/8-16-THD) | ||
| 9M-5732 | [3] | RIVET-POP | ||
| 2. | 138-3779 | [1] | PLATE AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 3. | 5P-9909 D | SEAL | ||
| 4. | 5M-3062 | [50] | BOLT (3/8-16X0.75-IN) | |
| 5. | 138-3780 | [1] | SHIELD AS | |
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 6. | 140-7617 | [1] | PLATE | |
| 7. | 5P-1075 | [50] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 1W-8793 | [6] | SPACER (13.8X30X20-MM THK) | |
| 9. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 103-1596 | [1] | GRILL AS-RADIATOR | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 11. | 113-9517 | [2] | HANDRAIL | |
| 12. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 14. | 123-3827 E | SEAL | ||
| 15. | 138-7063 | [1] | PLATE | |
| 16. | 138-7062 | [1] | PLATE | |
| 17. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 18. | 246-2641 | [1] | PADLOCK GP (RADIATOR GUARD) | |
| 5P-8500 A | [1] | KEY | ||
| A | NOT PART OF THIS GROUP | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24820419
8W-5385: GUARD & SUPPORT GP-RADIATOR
8W-5385 GUARD & SUPPORT GP-RADIATOR
S/N 8JM1-269
PART OF 112-4113 CHASSIS AR
S/N 8JM1-269
PART OF 112-4113 CHASSIS AR
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 103-1596 | [1] | GRILL AS-RADIATOR | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 5D-9629 | [5] | ROD | ||
| 2. | 113-9517 | [2] | HANDRAIL | |
| 3. | 104-1956 | [1] | SUPPORT AS | |
| 9F-2978 | [42] | NUT-WELD (3/8-16-THD) | ||
| 9M-5732 | [3] | RIVET-POP | ||
| 4. | 5M-3062 | [44] | BOLT (3/8-16X0.75-IN) | |
| 5. | 5P-1075 | [40] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 2A-7326 | [1] | SHIELD AS | |
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 7. | 2A-7136 | [1] | PLATE | |
| 8. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9. | 1W-8793 | [6] | SPACER (13.8X30X20-MM THK) | |
| 10. | 7I-4616 | [1] | PLATE AS | |
| 9F-2978 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 11. | 5P-9909 BD | SEAL | ||
| 12. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
