FRAME AND BODY
LINES GPLINK GP-STEERING
PLATE GP
STEP GP
BRAKING SYSTEM
BRAKE GPCONTROL GP
TANK GP
FRAME AND BODY
LINES GP
#SEBP24830450
7I-4610: LINES GP-LUBRICATION
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS#SEBP24830451
131-3740: LINK GP-STEERING
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-3739 | [1] | TIE ROD | |
| 2. | 131-3738 | [1] | TIE ROD GP (LH THREAD, RH) | |
| 2F-8057 | [1] | NUT-SLOTTED | ||
| 132-1143 | [1] | SEAL-BOOT | ||
| 3. | 131-3737 | [1] | TIE ROD GP (RH THREAD, LH) | |
| 2F-8057 | [1] | NUT-SLOTTED | ||
| 132-1143 | [1] | SEAL-BOOT | ||
| 4. | 132-1144 | [2] | CLAMP | |
| 5. | 1B-4367 | [2] | BOLT (5/8-11X3-IN) | |
| 6. | 3K-2889 | [2] | LOCKNUT (5/8-11-THD) |
#SEBP24830452
8X-2349: PLATE GP-PUSH
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-2366 | [1] | PLATE AS-PUSH | |
| 2. | 5J-7333 | [2] | HOOK | |
| 3. | 112-5853 | [1] | PLATE | |
| 4. | 5P-5923 BD | SEAL (.4M) | ||
| 5. | 112-5855 | [1] | BRACKET AS | |
| 6. | 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | |
| 7. | 5P-6652 | [8] | WASHER (20X44.5X6-MM THK) | |
| 8. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 9. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 10. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 13. | 112-5852 | [1] | PLATE AS | |
| 14. | 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | |
| 15. | 8C-6857 | [8] | BOLT (3/4-10X2.75-IN) | |
| 16. | 9D-6164 | [2] | BOSS (3/8-16X1.44-IN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP24830453
8X-1030: STEP GP
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-9804 | [8] | PLATE | |
| 2. | 4V-9809 | [2] | STEP AS | |
| (EACH INCLUDES) | ||||
| 4V-9803 | [2] | PLATE | ||
| 3. | 8X-1032 | [4] | SUPPORT-STEP (RUBBER) | |
| 4. | 123-3698 | [2] | PLATE | |
| 5. | 123-3699 | [2] | PLATE | |
| 6. | 198-7379 | [2] | STEP AS | |
| (EACH INCLUDES) | ||||
| 4V-9803 | [2] | PLATE | ||
| 7. | 198-7380 | [2] | STEP AS | |
| (EACH INCLUDES) | ||||
| 4V-9803 | [2] | PLATE | ||
| 8. | 1D-4689 | [24] | BOLT (1/2-13X1.75-IN) | |
| 9. | 1K-6872 | [24] | LOCKNUT (1/2-13-THD) | |
| 10. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-8919 | [8] | BOLT (1/2-13X1.75-IN) | |
#SEBP24830454
9W-5132: BRAKE GP-PARKING
9W-5132 BRAKE GP-PARKING
S/N 7JX800-99999; 4KY451-99999
PART OF 144-2232, 9W-5126 TRANSMISSION AR
S/N 7JX800-99999; 4KY451-99999
PART OF 144-2232, 9W-5126 TRANSMISSION AR
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5842 M | [6] | BOLT (M10X1.5X40-MM) | |
| 2. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 3. | 6Y-3849 | [1] | HUB-CLUTCH | |
| 4. | 9M-4335 | [6] | DOWEL-REACTION | |
| 5. | 5J-1086 | [1] | SEAL-O-RING | |
| 6. | 6Y-3850 | [1] | HOUSING-BRAKE | |
| 7. | 4S-5838 | [1] | RETAINER | |
| 8. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 9. | 4F-7390 | [1] | SEAL-O-RING | |
| 10. | 1P-7521 | [1] | YOKE | |
| 11. | 203-5957 | [1] | SEAL | |
| 12. | 9W-4431 | [20] | SPRING | |
| 13. | 9W-4430 | [20] | SPRING | |
| 14. | 6V-3668 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 7G-0437 | [6] | PLATE-CLUTCH | |
| 16. | 6Y-5352 | [5] | DISC-FRICTION | |
| 17. | 2J-6274 | [1] | SEAL-O-RING | |
| 18. | 183-7263 | [1] | PLUG AS | |
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 20. | 203-5958 | [1] | SEAL | |
| 21. | 325-5978 | [1] | PISTON | |
| 22. | 9W-4453 | [1] | PISTON | |
| 23. | 4H-9105 | [1] | SEAL-O-RING | |
| 24. | 6Y-3852 | [1] | PLUG | |
| 25. | 164-5619 | [1] | PLUG AS | |
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 27. | 9X-7743 | [1] | SEAL-LIP TYPE | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP24830455
8W-4265: BRAKE GP-SERVICE
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-3310 | [4] | SPINDLE-WHEEL | |
| 2. | 8X-2896 | [4] | HOUSING | |
| 3. | 7D-8439 B | [20] | SHIM (0.007-IN THK) | |
| 7D-8441 B | [28] | SHIM (0.005-IN THK) | ||
| 9D-7047 B | [8] | SHIM (0.02-MM THK) | ||
| 4. | 9D-3075 | [4] | RETAINER | |
| 5. | 5P-9118 | [12] | BOLT-LOCKING (5/8-11X2.5-IN) | |
| 6. | 368-0279 | [4] | SPROCKET (25-TEETH) | |
| 7. | 8X-2898 | [4] | COVER | |
| 8. | 8T-6472 | [40] | BOLT-LOCKING (5/8-11X2.5-IN) | |
| 0S-1566 | [16] | BOLT (5/8-11X1.5-IN) | ||
| 9. | 4D-3704 | [64] | WASHER-HARD (17X30X5-MM THK) | |
| 10. | 5P-8244 | [24] | WASHER-HARD (12X22.5X2.5-MM THK) | |
| 11. | 9J-5498 | [24] | SPRING | |
| 12. | 7D-8437 | [4] | CONE-BEARING | |
| 13. | 1P-4693 | [8] | CUP-BEARING | |
| 14. | 2P-3628 | [8] | SEAL-O-RING | |
| 15. | 7D-8434 | [40] | DISC | |
| 16. | 6Y-7916 | [36] | DISC-FRICTION | |
| 17. | 6G-0905 | [24] | BOLT (7/16-14X4.37-IN) | |
| 18. | 4B-7270 | [4] | CONE-BEARING | |
| 19. | 9W-6645 | [4] | SEAL GP-DUO-CONE | |
| 21. | 2G-6337 | [4] | HUB-BRAKE | |
| 22. | 6G-3378 | [4] | PISTON | |
| 23. | 4D-5497 | [4] | SEAL-D-RING | |
| 24. | 3J-5390 | [4] | PLUG (3/8-18-THD) | |
| 25. | 7D-8436 | [4] | SEAL-D-RING | |
| 26. | 8T-6473 | [8] | BOLT-LOCKING (5/8-11X2.75-IN) | |
| B | USE AS REQUIRED | |||
#SEBP24830456
8W-5934: CONTROL GP-PARKING BRAKE
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-8528 | [2] | SLEEVE | |
| 2. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 3. | 4S-7529 I | [1] | HOSE AS | |
| 4. | 8X-5160 | [1] | GROMMET | |
| 5. | 5H-4778 | [2] | ELBOW | |
| 6. | 3B-8822 | [1] | ELBOW | |
| 7. | 4S-7606 | [2] | ELBOW | |
| 8. | 253-4347 | [1] | VALVE AS-AIR | |
| 9. | 5K-2408 | [2] | FITTING | |
| 10. | 7T-9074 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(PARKING BRAKE) | |
| 11. | 6D-1432 | [1] | VALVE-CHECK (PARKING BRAKE) | |
| 12. | 4D-6585 | [1] | ELBOW-PIPE | |
| 13. | 5T-8285 | [1] | JUNCTION BLOCK | |
| 14. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 15. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 112-4834 I | [1] | HOSE AS | |
| 17. | 7D-3963 I | [1] | HOSE AS | |
| 18. | 7X-4736 | [1] | GROMMET | |
| 19. | 4H-6147 | [1] | CONNECTOR | |
| 20. | 3D-8884 | [1] | ELBOW | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24830457
8W-4741: CONTROL GP-SERVICE BRAKE
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-1908 | [2] | FITTING-BULKHEAD | |
| 9S-1302 | [2] | WASHER (27X44.45X2.5-MM THK) | ||
| 2. | 8W-8528 | [4] | SLEEVE | |
| 3. | 4H-6147 | [1] | CONNECTOR | |
| 4. | 3D-8913 | [2] | ELBOW | |
| 5. | 8X-4643 | [2] | TUBE AS | |
| 6. | 5K-6875 | [4] | ADAPTER | |
| 7. | 6K-6826 | [4] | ELBOW (45-DEG) | |
| 8. | 8D-7026 | [4] | GUARD | |
| 9. | 8T-9056 | [4] | BOLT (3/8-16X1.25-IN) | |
| 10. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 6G-1415 | [2] | JUNCTION BLOCK | |
| 12. | 5K-9238 | [4] | CONNECTOR | |
| 13. | 4D-0577 | [2] | ELBOW | |
| 14. | 7D-7419 I | [2] | HOSE AS | |
| 15. | 9X-8606 | [8] | CLIP | |
| 16. | 8X-4642 | [2] | TUBE AS | |
| 17. | 4D-0582 | [2] | ELBOW | |
| 18. | 6D-9855 I | [1] | HOSE AS | |
| 19. | 5H-4778 | [1] | ELBOW | |
| 20. | 8W-8527 | [7] | SLEEVE | |
| 21. | 7M-7410 | [2] | PLUG-PIPE | |
| 22. | 2L-3331 | [4] | CONNECTOR-PIPE | |
| 23. | 8W-1614 | [2] | CLIP | |
| 24. | 3S-2093 | [1] | STRAP-CABLE | |
| 25. | 8X-7603 | [2] | HOSE AS | |
| 26. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 27. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 28. | 8X-2680 | [1] | BRACKET AS | |
| 29. | 8X-2650 Y | [1] | VALVE GP-AIR CONTROL (SERVICE BRAKE) | |
| 30. | 8X-8451 | [1] | PLATE | |
| 31. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 32. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 8X-7601 | [1] | CLAMP | |
| 34. | 8X-8271 | [1] | CLAMP | |
| 35. | 8X-8921 | [1] | CLAMP | |
| 36. | 8W-8537 | [2] | CLAMP | |
| 37. | 8X-8450 | [1] | PLATE | |
| 38. | 5T-8285 | [1] | JUNCTION BLOCK | |
| 39. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 40. | 1B-0676 | [1] | PIN | |
| 41. | 8W-8903 | [1] | CLIP | |
| 42. | 8W-8527 | [4] | SLEEVE | |
| 43. | 8X-8448 | [1] | BRACKET AS | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| [2] | STUD | |||
| 44. | 5M-3062 | [5] | BOLT (3/8-16X0.75-IN) | |
| 45. | 4S-7558 I | [1] | HOSE AS | |
| 46. | 4D-2560 | [1] | CONNECTOR-PIPE | |
| 47. | 4M-8973 | [1] | ELBOW | |
| 48. | 5P-0767 E | HOSE | ||
| 49. | 8W-8532 | [1] | CLIP | |
| 50. | 9L-1566 | [1] | SUPPORT | |
| 51. | 3K-6060 | [4] | LOCKNUT (3/8-16-THD) | |
| 52. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 53. | 9J-8783 B | [1] | SHIM (0.508-MM THK) | |
| 54. | 110-3326 | [1] | PLATE AS | |
| 55. | 4D-0577 | [1] | ELBOW | |
| 56. | 6V-4245 | [1] | ELBOW | |
| 57. | 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | |
| 58. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 59. | 8X-2497 | [1] | LEVER | |
| 60. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 61. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 62. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 63. | 8X-7601 | [1] | CLAMP | |
| 64. | 8X-8271 | [1] | CLAMP | |
| 65. | 8X-8921 | [1] | CLAMP | |
| 66. | 8W-8537 | [2] | CLAMP | |
| 67. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 68. | 3S-2713 | [2] | NUT-FULL (3/8-24-THD) | |
| 69. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 70. | 1B-0676 | [1] | PIN | |
| 71. | 8X-2499 | [1] | PEDAL-BRAKE | |
| 72. | 8W-8527 | [2] | SLEEVE | |
| 73. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 74. | 128-6944 | [1] | PLATE AS | |
| 75. | 7V-0446 | [2] | CLIP | |
| 76. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 77. | 5J-3658 | [1] | ROD | |
| 78. | 3T-0050 | [2] | CLIP | |
| 79. | 7M-7410 | [2] | PLUG-PIPE | |
| 80. | 2D-7325 | [1] | TEE-PIPE | |
| 81. | 7J-8611 | [1] | ELBOW-PIPE | |
| 82. | 1H-7724 | [3] | BUSHING-REDUCER | |
| 83. | 5P-0721 E | HOSE | ||
| 84. | 8X-7600 I | [1] | HOSE AS | |
| 85. | 2L-3331 | [2] | CONNECTOR-PIPE | |
| 86. | 4M-6425 | [3] | BOLT (5/16-18X1-IN) | |
| 87. | 6V-8189 | [3] | NUT (5/16-18-THD) | |
| 88. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 89. | 4D-0582 | [1] | ELBOW | |
| 90. | 5D-7464 I | [1] | HOSE AS | |
| 91. | 4D-6885 I | [1] | HOSE AS | |
| 92. | 8L-6005 | [3] | TEE-PIPE | |
| 93. | 2D-6386 | [2] | COUPLING | |
| 94. | 3K-6060 | [4] | LOCKNUT (3/8-16-THD) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24830458
8W-4741: CONTROL GP-SERVICE BRAKE
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-1908 | [2] | FITTING-BULKHEAD | |
| 9S-1302 | [2] | WASHER (27X44.45X2.5-MM THK) | ||
| 2. | 8W-8528 | [4] | SLEEVE | |
| 3. | 4H-6147 | [1] | CONNECTOR | |
| 4. | 3D-8913 | [2] | ELBOW | |
| 5. | 8X-4643 | [2] | TUBE AS | |
| 6. | 5K-6875 | [4] | ADAPTER | |
| 7. | 6K-6826 | [4] | ELBOW (45-DEG) | |
| 8. | 8D-7026 | [4] | GUARD | |
| 9. | 8T-9056 | [4] | BOLT (3/8-16X1.25-IN) | |
| 10. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 6G-1415 | [2] | JUNCTION BLOCK | |
| 12. | 5K-9238 | [4] | CONNECTOR | |
| 13. | 4D-0577 | [2] | ELBOW | |
| 14. | 7D-7419 I | [2] | HOSE AS | |
| 15. | 9X-8606 | [8] | CLIP | |
| 16. | 8X-4642 | [2] | TUBE AS | |
| 17. | 4D-0582 | [2] | ELBOW | |
| 18. | 6D-9855 I | [1] | HOSE AS | |
| 19. | 5H-4778 | [1] | ELBOW | |
| 20. | 8W-8527 | [7] | SLEEVE | |
| 21. | 7M-7410 | [2] | PLUG-PIPE | |
| 22. | 2L-3331 | [4] | CONNECTOR-PIPE | |
| 23. | 8W-1614 | [2] | CLIP | |
| 24. | 3S-2093 | [1] | STRAP-CABLE | |
| 25. | 8X-7603 | [2] | HOSE AS | |
| 26. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 27. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 28. | 8X-2680 | [1] | BRACKET AS | |
| 29. | 8X-2650 Y | [1] | VALVE GP-AIR CONTROL (BRAKE) | |
| 30. | 8X-8451 | [1] | PLATE | |
| 31. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 32. | 8T-4896 C | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 8X-7601 | [1] | CLAMP | |
| 34. | 8X-8271 | [1] | CLAMP | |
| 35. | 8X-8921 | [1] | CLAMP | |
| 36. | 8W-8537 | [2] | CLAMP | |
| 37. | 8X-8450 | [1] | PLATE | |
| 38. | 5T-8285 | [1] | JUNCTION BLOCK | |
| 39. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 40. | 1B-0676 | [1] | PIN | |
| 41. | 8W-8903 | [1] | CLIP | |
| 42. | 8W-8527 | [4] | SLEEVE | |
| 43. | 8X-8448 | [1] | BRACKET AS | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| [2] | STUD | |||
| 44. | 5M-3062 | [5] | BOLT (3/8-16X0.75-IN) | |
| 45. | 4S-7558 I | [1] | HOSE AS | |
| 46. | 4D-2560 | [1] | CONNECTOR-PIPE | |
| 47. | 4M-8973 | [1] | ELBOW | |
| 48. | 5P-0767 E | HOSE (60CM) | ||
| 49. | 8W-8532 | [1] | CLIP | |
| 50. | 9L-1566 | [1] | SUPPORT | |
| 51. | 3K-6060 | [4] | LOCKNUT (3/8-16-THD) | |
| 52. | 8T-2502 C | [1] | BOLT (3/8-16X1.125-IN) | |
| 53. | 9J-8783 B | [1] | SHIM (0.508-MM THK) | |
| 54. | 110-3326 | [1] | PLATE AS | |
| 55. | 4D-0577 | [1] | ELBOW | |
| 56. | 6V-4245 | [1] | ELBOW | |
| 57. | 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | |
| 58. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 59. | 8X-2497 | [1] | LEVER | |
| 60. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 61. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 62. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 63. | 8X-7601 | [1] | CLAMP | |
| 64. | 8X-8271 | [1] | CLAMP | |
| 65. | 8X-8921 | [1] | CLAMP | |
| 66. | 8W-8537 | [2] | CLAMP | |
| 67. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 68. | 3S-2713 | [2] | NUT-FULL (3/8-24-THD) | |
| 69. | 9B-7237 C | [2] | BOLT (3/8-16X1.25-IN) | |
| 70. | 1B-0676 | [1] | PIN | |
| 71. | 8X-2499 | [1] | PEDAL-BRAKE | |
| 72. | 8W-8527 | [2] | SLEEVE | |
| 73. | 1B-2578 C | [1] | NUT (3/8-16-THD) | |
| 74. | 128-6944 | [1] | PLATE AS | |
| 75. | 7V-0446 | [2] | CLIP | |
| 76. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 77. | 5J-3658 | [1] | ROD | |
| 78. | 3T-0050 | [2] | CLIP | |
| 79. | 7M-7410 | [2] | PLUG-PIPE | |
| 80. | 2D-7325 | [1] | TEE-PIPE | |
| 81. | 7J-8611 | [1] | ELBOW-PIPE | |
| 82. | 1H-7724 | [3] | BUSHING-REDUCER | |
| 83. | 5P-0721 E | HOSE (168CM) | ||
| 84. | 8X-7600 I | [1] | HOSE AS | |
| 85. | 2L-3331 | [2] | CONNECTOR-PIPE | |
| 86. | 4M-6425 | [3] | BOLT (5/16-18X1-IN) | |
| 87. | 6V-8189 | [3] | NUT (5/16-18-THD) | |
| 88. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 89. | 4D-0582 | [1] | ELBOW | |
| 90. | 6D-9598 CI | [1] | HOSE AS | |
| 91. | 4D-6885 I | [1] | HOSE AS | |
| 92. | 8L-6005 | [3] | TEE-PIPE | |
| 93. | 2D-6386 | [2] | COUPLING | |
| 94. | 3K-6060 | [4] | LOCKNUT (3/8-16-THD) | |
| 95. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24830459
8W-5547: TANK GP-AIR
For full view, you need register
Parts for your 160H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-8575 | [1] | RESERVOIR | |
| 2. | 2G-1034 | [2] | VALVE-AIR RELIEF | |
| 3. | 8W-8496 | [2] | PLATE | |
| 4. | 004-5933 | [1] | TEE-PIPE | |
| 5. | 6A-3591 | [1] | TEE-PIPE | |
| 6. | 6D-6489 | [1] | CONNECTOR-PIPE | |
| 7. | 3D-8913 | [1] | ELBOW | |
| 8. | 002-6453 | [2] | ELBOW | |
| 9. | 8M-3368 | [2] | VALVE-CHECK | |
| 10. | 2H-9091 | [1] | CONNECTOR-PIPE | |
| 11. | 2H-3940 | [1] | ELBOW | |
| 12. | 140-8786 I | [1] | HOSE AS | |
| 13. | 9D-6663 | [2] | VALVE-DRAIN | |
| 14. | 7F-9311 | [4] | FITTING | |
| 15. | 1P-7115 | [4] | GROMMET AS | |
| 16. | 7X-0578 | [8] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 17. | 5S-7383 | [4] | BOLT (3/8-16X1.75-IN) | |
| 18. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 20. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 21. | 9D-2549 I | [1] | HOSE AS | |
| 22. | 9G-9154 | [1] | CLIP | |
| 24. | 8W-8528 | [3] | SLEEVE | |
| 26. | 8W-7915 | [2] | SHIM (2-MM THK) | |
| 27. | 7D-4903 | [1] | ADAPTER | |
| 28. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8X-7740 | [1] | CLIP (3/8-16X.750IN) | |
| 30. | 8T-9383 | [1] | BOLT (1/2-13X0.75-IN) | |
| 31. | 5P-8998 | [2] | FITTING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
