ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
DRIVE GP-AUXILIARYADAPTER GP-ENGINE TO XMSN
AIR COMPRESSOR GP
ENGINE ARRANGEMENT
ENGINE AR#SEBP24840020
152-7908: ENGINE AR
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
143-7351 Y | [1] | AIR COMPRESSOR GP | ||
1N-3477 Y | [1] | BREATHER GP | ||
100-4966 Y | [1] | CAMSHAFT GP | ||
105-1695 Y | [1] | CONTROL GP-FUEL INJECTION | ||
7E-9429 Y | [1] | CONTROL GP-GOVERNOR | ||
100-6269 Y | [1] | COOLER GP-ENGINE OIL | ||
113-1134 Y | [1] | COVER GP-CYLINDER BLOCK | ||
7W-9847 Y | [1] | COVER GP-FRONT HOUSING | ||
4P-1495 Y | [1] | COVER GP-INLET MANIFOLD | ||
7E-9915 Y | [1] | COVER GP-VALVE MECHANISM | ||
4W-2197 Y | [1] | CRANKSHAFT GP | ||
7E-2482 Y | [1] | CYLINDER BLOCK GP | ||
105-1684 Y | [1] | CYLINDER HEAD GP | ||
4P-4451 Y | [1] | DAMPER GP | ||
7E-2313 Y | [1] | PLUG GP-OIL PAN | ||
100-4024 Y | [1] | DRIVE GP-FAN | ||
7C-6998 Y | [1] | DRIVE GP-WATER PUMP | ||
4P-8183 Y | [1] | FILTER GP-ENGINE OIL | ||
6I-2693 Y | [1] | FILTER GP-FUEL | ||
7W-8420 Y | [1] | FUMES DISPOSAL GP | ||
4P-2615 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
2W-8475 Y | [1] | GEAR GP-FRONT | ||
126-5885 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
4P-1479 Y | [1] | STARTING AID GP (HEATER) | ||
100-6570 Y | [1] | HOUSING GP-FLYWHEEL | ||
7L-0002 Y | [1] | HOUSING GP-FRONT | ||
7E-2314 Y | [1] | LIFTING GP-ENGINE | ||
119-7798 Y | [1] | LINES GP-AIR COMPRESSOR | ||
7E-2315 Y | [1] | LINES GP-ENGINE OIL | ||
107-6824 Y | [1] | LINES GP-FUEL | ||
127-4542 Y | [1] | LINES GP-FUEL FILTER | ||
101-4562 Y | [1] | LINES GP-FUEL RATIO CONTROL | ||
7C-2476 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
119-3035 Y | [1] | LINES GP-WATER | ||
6I-2298 Y | [1] | MANIFOLD GP-EXHAUST | ||
4P-1496 Y | [1] | MANIFOLD GP-INLET | ||
4P-1723 Y | [1] | PAN GP-OIL | ||
115-4081 Y | [6] | PISTON & ROD GP | ||
4P-4452 Y | [1] | PULLEY GP-CRANKSHAFT | ||
4W-2195 Y | [1] | PUMP GP-ENGINE OIL | ||
105-1694 Y | [6] | PUMP GP-FUEL INJECTION | ||
4N-3287 Y | [1] | PUMP GP-FUEL PRIMING | ||
4P-8538 Y | [1] | PUMP GP-WATER | ||
4W-1016 Y | [1] | SEAL GP-CRANKSHAFT | ||
9Y-0545 Y | [1] | SOLENOID GP-SHUTOFF (FUEL) | ||
135-2149 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
4P-2838 Y | [1] | SUPPORT GP-ENGINE | ||
101-4553 Y | [1] | TURBOCHARGER GP | ||
4P-4372 Y | [1] | MECHANISM GP-FUEL PUMP & VALVE | ||
112-5476 Y | [1] | STARTING AID GP (SWITCH, WIRING) | ||
(GASKET KITS WILL BE PROVIDED WHEN AVAILABLE) | ||||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840021
178-4491: ENGINE AR
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1N-3477 Y | [1] | BREATHER GP | ||
100-4966 Y | [1] | CAMSHAFT GP | ||
105-1695 Y | [1] | CONTROL GP-FUEL INJECTION | ||
4P-2986 Y | [1] | CONTROL GP-GOVERNOR | ||
S/N 2FR9855-UP | ||||
100-6269 Y | [1] | COOLER GP-ENGINE OIL | ||
7E-7598 Y | [1] | COVER GP-CYLINDER BLOCK | ||
7W-9847 Y | [1] | COVER GP-FRONT HOUSING | ||
6I-3337 Y | [1] | COVER GP-INLET MANIFOLD | ||
9Y-9507 Y | [1] | COVER GP-VALVE MECHANISM | ||
4W-2197 Y | [1] | CRANKSHAFT GP | ||
2W-9746 Y | [1] | CYLINDER BLOCK GP | ||
105-1684 Y | [1] | CYLINDER HEAD GP | ||
4P-4453 Y | [1] | DAMPER GP | ||
7E-2313 Y | [1] | PLUG GP-OIL PAN | ||
7C-6998 Y | [1] | DRIVE GP-WATER PUMP | ||
4P-5931 Y | [1] | FASTENER GP-ENGINE | ||
S/N 2FR9855-UP | ||||
4P-3914 Y | [1] | FILLER GP-ENGINE OIL | ||
4P-8183 Y | [1] | FILTER GP-ENGINE OIL | ||
6I-2693 Y | [1] | FILTER GP-FUEL | ||
4P-5520 Y | [1] | FITTING GP-AIR COMPRESSOR | ||
S/N 2FR9855-UP | ||||
7W-8420 Y | [1] | FUMES DISPOSAL GP | ||
9Y-6685 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
2W-8475 Y | [1] | GEAR GP-FRONT | ||
100-6261 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
4P-1479 Y | [1] | STARTING AID GP (HEATER) | ||
9Y-6683 Y | [1] | HOUSING GP-FLYWHEEL | ||
7L-0002 Y | [1] | HOUSING GP-FRONT | ||
7E-2314 Y | [1] | LIFTING GP-ENGINE | ||
7E-2315 Y | [1] | LINES GP-ENGINE OIL | ||
113-1098 Y | [1] | LINES GP-FUEL | ||
113-1097 Y | [1] | LINES GP-FUEL FILTER | ||
101-4562 Y | [1] | LINES GP-FUEL RATIO CONTROL | ||
7C-2476 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
100-4942 Y | [1] | HOUSING & REGULATOR GP | ||
6I-2298 Y | [1] | MANIFOLD GP-EXHAUST | ||
4P-1496 Y | [1] | MANIFOLD GP-INLET | ||
4P-4372 Y | [1] | MECHANISM GP-FUEL PUMP & VALVE | ||
6I-2697 Y | [1] | MOUNTING GP-AIR CLEANER | ||
4P-1723 Y | [1] | PAN GP-OIL | ||
105-1711 Y | [6] | PISTON & ROD GP | ||
4P-4452 Y | [1] | PULLEY GP-CRANKSHAFT | ||
4W-2195 Y | [1] | PUMP GP-ENGINE OIL | ||
101-4561 Y | [6] | PUMP GP-FUEL INJECTION | ||
4P-3680 Y | [1] | PUMP GP-WATER | ||
4W-1016 Y | [1] | SEAL GP-CRANKSHAFT | ||
4P-1603 Y | [1] | SHIELD GP-TURBOCHARGER | ||
7E-6187 Y | [1] | SOLENOID GP-SHUTOFF | ||
101-4548 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR9855-10885 | ||||
189-8768 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR10886-UP | ||||
112-5476 Y | [1] | STARTING AID GP (SWITCH, WIRING) | ||
AVAILABLE GASKET KIT(S): | ||||
124-3690 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
125-4656 | KIT-GASKET (FRONT STRUCTURE) | |||
165-4070 | KIT-GASKET (FUEL SYSTEM) | |||
186-0883 | KIT-GASKET (OIL COOLER, LINES) | |||
7X-2525 | KIT-GASKET (REAR STRUCTURE) | |||
165-4087 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
130-1310 | KIT-GASKET (TURBOCHARGER) | |||
140-7474 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840022
178-4492: ENGINE AR
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1N-3477 Y | [1] | BREATHER GP | ||
100-4966 Y | [1] | CAMSHAFT GP | ||
105-1695 Y | [1] | CONTROL GP-FUEL INJECTION | ||
4P-2986 Y | [1] | CONTROL GP-GOVERNOR | ||
S/N 2FR9855-UP | ||||
100-6269 Y | [1] | COOLER GP-ENGINE OIL | ||
7E-7598 Y | [1] | COVER GP-CYLINDER BLOCK | ||
7W-9847 Y | [1] | COVER GP-FRONT HOUSING | ||
6I-3337 Y | [1] | COVER GP-INLET MANIFOLD | ||
9Y-9507 Y | [1] | COVER GP-VALVE MECHANISM | ||
4W-2197 Y | [1] | CRANKSHAFT GP | ||
2W-9746 Y | [1] | CYLINDER BLOCK GP | ||
105-1684 Y | [1] | CYLINDER HEAD GP | ||
4P-4453 Y | [1] | DAMPER GP | ||
7E-2313 Y | [1] | PLUG GP-OIL PAN | ||
7C-6998 Y | [1] | DRIVE GP-WATER PUMP | ||
4P-5931 Y | [1] | FASTENER GP-ENGINE | ||
S/N 2FR9855-UP | ||||
4P-3914 Y | [1] | FILLER GP-ENGINE OIL | ||
4P-8183 Y | [1] | FILTER GP-ENGINE OIL | ||
6I-2693 Y | [1] | FILTER GP-FUEL | ||
4P-5520 Y | [1] | FITTING GP-AIR COMPRESSOR | ||
S/N 2FR9855-UP | ||||
7W-8420 Y | [1] | FUMES DISPOSAL GP | ||
9Y-6685 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
2W-8475 Y | [1] | GEAR GP-FRONT | ||
136-0591 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
4P-1479 Y | [1] | STARTING AID GP (HEATER) | ||
9Y-6683 Y | [1] | HOUSING GP-FLYWHEEL | ||
7L-0002 Y | [1] | HOUSING GP-FRONT | ||
7E-2314 Y | [1] | LIFTING GP-ENGINE | ||
7E-2315 Y | [1] | LINES GP-ENGINE OIL | ||
113-1098 Y | [1] | LINES GP-FUEL | ||
113-1097 Y | [1] | LINES GP-FUEL FILTER | ||
101-4562 Y | [1] | LINES GP-FUEL RATIO CONTROL | ||
7C-2476 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
100-4942 Y | [1] | HOUSING & REGULATOR GP | ||
6I-2298 Y | [1] | MANIFOLD GP-EXHAUST | ||
4P-1496 Y | [1] | MANIFOLD GP-INLET | ||
4P-4372 Y | [1] | MECHANISM GP-FUEL PUMP & VALVE | ||
6I-2697 Y | [1] | MOUNTING GP-AIR CLEANER | ||
4P-1723 Y | [1] | PAN GP-OIL | ||
105-1711 Y | [6] | PISTON & ROD GP | ||
4P-4452 Y | [1] | PULLEY GP-CRANKSHAFT | ||
4W-2195 Y | [1] | PUMP GP-ENGINE OIL | ||
101-4561 Y | [6] | PUMP GP-FUEL INJECTION | ||
4P-3680 Y | [1] | PUMP GP-WATER | ||
4W-1016 Y | [1] | SEAL GP-CRANKSHAFT | ||
4P-1603 Y | [1] | SHIELD GP-TURBOCHARGER | ||
7E-6187 Y | [1] | SOLENOID GP-SHUTOFF | ||
101-4548 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR9855-10886 | ||||
189-8768 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR10887-UP | ||||
112-5476 Y | [1] | STARTING AID GP (SWITCH, WIRING) | ||
AVAILABLE GASKET KIT(S): | ||||
124-3690 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
125-4656 | KIT-GASKET (FRONT STRUCTURE) | |||
165-4070 | KIT-GASKET (FUEL SYSTEM) | |||
186-0883 | KIT-GASKET (OIL COOLER, LINES) | |||
7X-2525 | KIT-GASKET (REAR STRUCTURE) | |||
165-4087 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
130-1310 | KIT-GASKET (TURBOCHARGER) | |||
140-7474 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840023
178-4493: ENGINE AR
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1N-3477 Y | [1] | BREATHER GP | ||
100-4966 Y | [1] | CAMSHAFT GP | ||
105-1695 Y | [1] | CONTROL GP-FUEL INJECTION | ||
4P-2986 Y | [1] | CONTROL GP-GOVERNOR | ||
S/N 2FR9855-UP | ||||
100-6269 Y | [1] | COOLER GP-ENGINE OIL | ||
7E-7598 Y | [1] | COVER GP-CYLINDER BLOCK | ||
7W-9847 Y | [1] | COVER GP-FRONT HOUSING | ||
6I-3337 Y | [1] | COVER GP-INLET MANIFOLD | ||
9Y-9507 Y | [1] | COVER GP-VALVE MECHANISM | ||
4W-2197 Y | [1] | CRANKSHAFT GP | ||
2W-9746 Y | [1] | CYLINDER BLOCK GP | ||
105-1684 Y | [1] | CYLINDER HEAD GP | ||
4P-4453 Y | [1] | DAMPER GP | ||
7E-2313 Y | [1] | PLUG GP-OIL PAN | ||
7C-6998 Y | [1] | DRIVE GP-WATER PUMP | ||
4P-5931 Y | [1] | FASTENER GP-ENGINE | ||
S/N 2FR9855-UP | ||||
4P-3914 Y | [1] | FILLER GP-ENGINE OIL | ||
4P-8183 Y | [1] | FILTER GP-ENGINE OIL | ||
6I-2693 Y | [1] | FILTER GP-FUEL | ||
4P-5520 Y | [1] | FITTING GP-AIR COMPRESSOR | ||
S/N 2FR9855-UP | ||||
7W-8420 Y | [1] | FUMES DISPOSAL GP | ||
9Y-6685 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
2W-8475 Y | [1] | GEAR GP-FRONT | ||
105-1689 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
4P-1479 Y | [1] | STARTING AID GP (HEATER) | ||
9Y-6683 Y | [1] | HOUSING GP-FLYWHEEL | ||
7L-0002 Y | [1] | HOUSING GP-FRONT | ||
7E-2314 Y | [1] | LIFTING GP-ENGINE | ||
7E-2315 Y | [1] | LINES GP-ENGINE OIL | ||
113-1098 Y | [1] | LINES GP-FUEL | ||
113-1097 Y | [1] | LINES GP-FUEL FILTER | ||
101-4562 Y | [1] | LINES GP-FUEL RATIO CONTROL | ||
7C-2476 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
100-4942 Y | [1] | HOUSING & REGULATOR GP | ||
6I-2298 Y | [1] | MANIFOLD GP-EXHAUST | ||
4P-1496 Y | [1] | MANIFOLD GP-INLET | ||
4P-4372 Y | [1] | MECHANISM GP-FUEL PUMP & VALVE | ||
6I-2697 Y | [1] | MOUNTING GP-AIR CLEANER | ||
4P-1723 Y | [1] | PAN GP-OIL | ||
105-1711 Y | [6] | PISTON & ROD GP | ||
4P-4452 Y | [1] | PULLEY GP-CRANKSHAFT | ||
4W-2195 Y | [1] | PUMP GP-ENGINE OIL | ||
101-4561 Y | [6] | PUMP GP-FUEL INJECTION | ||
4P-3680 Y | [1] | PUMP GP-WATER | ||
4W-1016 Y | [1] | SEAL GP-CRANKSHAFT | ||
4P-1603 Y | [1] | SHIELD GP-TURBOCHARGER | ||
7E-6187 Y | [1] | SOLENOID GP-SHUTOFF | ||
132-5236 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR9855-10886 | ||||
189-8767 Y | [1] | TURBOCHARGER GP | ||
S/N 2FR10887-UP | ||||
112-5476 Y | [1] | STARTING AID GP (SWITCH, WIRING) | ||
AVAILABLE GASKET KIT(S): | ||||
124-3690 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
125-4656 | KIT-GASKET (FRONT STRUCTURE) | |||
165-4070 | KIT-GASKET (FUEL SYSTEM) | |||
186-0883 | KIT-GASKET (OIL COOLER, LINES) | |||
7X-2525 | KIT-GASKET (REAR STRUCTURE) | |||
165-4087 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
130-1310 | KIT-GASKET (TURBOCHARGER) | |||
140-7474 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840024
6I-4638: ADAPTER GP-AUXILIARY DRIVE
6I-4638 ADAPTER GP-AUXILIARY DRIVE
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP24840025
117-0176: ADAPTER GP-ENGINE TO XMSN
117-0176 ADAPTER GP-ENGINE TO XMSN
CANNOT BE USED WITH REAR POWER TAKE-OFF
AN ATTACHMENT
CANNOT BE USED WITH REAR POWER TAKE-OFF
AN ATTACHMENT
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP24840026
4P-5435: AIR COMPRESSOR AS
4P-5435 AIR COMPRESSOR AS
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 109-2996, 4P-0596, 4P-3956 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@125-9562@@@@@
ALSO AN ATTACHMENT
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 109-2996, 4P-0596, 4P-3956 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@125-9562@@@@@
ALSO AN ATTACHMENT
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-4358 | [1] | FLANGE | |
2. | 6D-1004 | [1] | GASKET | |
3. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
4. | 6V-0387 | [1] | PLUG-PIPE | |
5. | 4P-3977 | [1] | GASKET-CYLINDER HEAD | |
6. | 7E-8928 | [1] | GASKET | |
7. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
8. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
9. | 4P-3966 | [1] | PISTON & ROD AS | |
10. | 128-7759 | [1] | ADAPTER AS | |
128-7761 | [3] | BOLT | ||
AVAILABLE REPAIR KIT(S): | ||||
7E-8923 | [1] | KIT-CRANKSHAFT BEARING (AIR COMPRESSOR) | ||
(INCLUDES SEALS, BEARINGS, GASKETS, INSERTS, & WASHERS) | ||||
164-7572 | [1] | KIT-RING (AIR COMPRESSOR) | ||
(INCLUDES STD PISTON RINGS, PISTON SEG RINGS, STD SPACER RINGS & SHEET) | ||||
7E-8926 | [1] | KIT-CYLINDER HEAD (AIR COMPRESSOR) | ||
(INCLUDES SEALS, GASKETS, PISTON, SPRINGS, STOPS, VALVES, SEATS, & O-RING)) | ||||
150-5146 | [1] | KIT-UNLOADER (AIR COMPRESSOR) | ||
213-3124 | [1] | KIT-COMPRESSOR REPAIR (AIR) | ||
(INCLUDES HEAD AS & GASKETS) | ||||
M | METRIC PART |
#SEBP24840027
109-2996: AIR COMPRESSOR GP
109-2996 AIR COMPRESSOR GP
S/N 2FR3778-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 155-2822 AIR COMPRESSOR GP
S/N 2FR3778-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 155-2822 AIR COMPRESSOR GP
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6L-1883 | [1] | GASKET | |
2. | 4N-9679 | [1] | GOVERNOR AS-AIR COMPRESSOR | |
9M-0402 | [1] | KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR) | ||
(INCLUDES GROMMETS, FILTERS, SPRING, VALVE, RING, COVER, & GASKET) | ||||
2A. | 2S-2923 | [1] | COVER AS | |
2B. | 2K-8198 | [1] | SEAL-O-RING | |
3. | 4P-5389 | [1] | VALVE AS-RELIEF | |
4. | 4L-7318 | [2] | LOCKWASHER | |
5. | 4M-6424 | [2] | BOLT (5/16-18X3-IN) | |
6. | 4P-5435 Y | [1] | AIR COMPRESSOR AS | |
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840028
120-7400: AIR COMPRESSOR GP
120-7400 AIR COMPRESSOR GP
S/N 2FR6219-UP
PROVIDES COMPRESSOR WITHOUT GOVERNOR AIR INLET TO COMPRESSOR
S/N 2FR6219-UP
PROVIDES COMPRESSOR WITHOUT GOVERNOR AIR INLET TO COMPRESSOR
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4P-5106 | [1] | BRACKET | |
2. | 7C-3179 | [1] | GEAR (50-TEETH) | |
3. | 125-9562 YC | [1] | AIR COMPRESSOR GP | |
4. | 135-9819 | [1] | SEAL-INTEGRAL | |
5. | 200-1196 I | [1] | HOSE AS | |
6. | 061-7538 | [1] | SEAL-O-RING | |
7. | 2N-1287 | [1] | ELBOW-FLARED | |
8. | 5P-8245 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
9. | 6B-6682 | [1] | NUT-FULL (3/4-16-THD) | |
10. | 6D-3479 | [1] | CLIP | |
11. | 6V-5696 M | [2] | BOLT (M12X1.75X80-MM) | |
12. | 7X-0521 | [1] | WASHER-HARD (20X36.5X5-MM THK) | |
13. | 8C-6866 | [1] | CONNECTOR | |
14. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
15. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
16. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
17. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
C | CHANGE FROM PREVIOUS TYPE | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP24840029
125-9562: AIR COMPRESSOR GP
125-9562 AIR COMPRESSOR GP
S/N 2FR6219-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 120-7400 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@ 4P-5435@@@@@
S/N 2FR6219-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 120-7400 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@ 4P-5435@@@@@
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-4358 | [1] | FLANGE | |
2. | 6D-1004 | [1] | GASKET | |
3. | 6V-0387 | [2] | PLUG-PIPE | |
4. | 4P-3977 | [1] | GASKET-CYLINDER HEAD | |
5. | 7E-8928 | [1] | GASKET | |
6. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
7. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
8. | 128-7759 | [1] | ADAPTER AS (AIR COMPRESSOR) | |
128-7760 | [1] | ADAPTER | ||
128-7761 | [3] | BOLT | ||
9. | 4P-3966 | [1] | PISTON & ROD AS | |
10. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
AVAILABLE REPAIR KIT(S): | ||||
7E-8923 | [1] | KIT-CRANKSHAFT BEARING (AIR COMPRESSOR) | ||
(INCLUDES SEALS, BEARINGS, GASKETS, INSERTS, & WASHERS) | ||||
164-7572 | [1] | KIT-RING (AIR COMPRESSOR) | ||
(INCLUDES RINGS) | ||||
7E-8926 | [1] | KIT-CYLINDER HEAD (AIR COMPRESSOR) | ||
(INCLUDES SEALS, GASKETS, PISTON, SPRINGS, STOPS, VALVES, SEATS & O-RING) | ||||
150-5146 | [1] | KIT-UNLOADER (AIR COMPRESSOR) | ||
213-3124 | [1] | KIT-COMPRESSOR REPAIR (AIR) | ||
(INCLUDES HEAD AS. & GASKETS) | ||||
M | METRIC PART |
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Reuse And Salvage Guidelines
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
2000/12/25
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}