AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-7585 VALVE GP-STEERING & BRAKE CONT S/N 9ZM1-UP; 2RN1-UP PART OF 107-5941 CONTROL GP-STEER CLUTCH & BRK D6M


STEERING AND BRAKING SYSTEM
VALVE GP
HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 2RN
 D6M & D6M LGP Track-Type Tractor 2RN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2485 D6M 2RN   (1995)

STEERING AND BRAKING SYSTEM

VALVE GP
VALVE GP-STEERING & BRAKE CONT
112-7585 VALVE GP-STEERING & BRAKE CONT
 

#SEBP24850380
 

112-7585: VALVE GP-STEERING & BRAKE CONT

112-7585 VALVE GP-STEERING & BRAKE CONT
S/N 9ZM1-UP; 2RN1-UP
PART OF 107-5941 CONTROL GP-STEER CLUTCH & BRK
i00493308 SEBP2485
1127585 VALVE GP-STEERING & BRAKE CONT Parts scheme 1127585 VALVE GP-STEERING & BRAKE CONT Parts scheme 1127585 VALVE GP-STEERING & BRAKE CONT Parts scheme 1127585 VALVE GP-STEERING & BRAKE CONT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3T-6315 [1] BODY-CLUTCH & BRAKE CONTROL  
4. 3T-6466 [1] GASKET  
5. 3T-6465 [1] COVER  
6. 8T-9043 [4] BOLT (5/16-18X0.875-IN)  
7. 4M-6425 [2] BOLT (5/16-18X1-IN)  
8. 9W-1544 [2] STOP  
9. 7T-4556 [2] BLOCK  
10. 8M-5249 [2] SEAL-O-RING  
11. 7X-0288 [2] BOLT (3/8-16X1.625-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8M-8157 [2] SEAL-O-RING  
13. 2A-3348 [4] DOWEL  
14. 7T-7120 [2] PLATE  
15. 7T-4627 [2] SPRING AS  
    (EACH INCLUDES)
  3G-3916 [2] RING-RETAINING  
  6T-9818 [1] PIN  
  6V-5701 [2] BEARING AS-NEEDLE  
  7T-4386 [1] SPRING  
16. 5S-7379 [10] BOLT (3/8-16X0.875-IN)  
17. 9S-8005 [1] PLUG (3/4-16-THD)  
18. 3K-0360 [4] SEAL-O-RING  
19. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
20. 5P-6944 [2] ADAPTER  
21. 6V-0852 [4] CAP-DUST  
22. 3J-1907 [6] SEAL-O-RING  
23. 9S-8004 [2] PLUG (9/16-18-THD)  
24. 3T-5819 [1] COVER  
  3T-5821 [1] GASKET  
25. 1T-0414 [1] BOLT-12 POINT HEAD (5/16-18X1-IN)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 3T-6687 [1] LEVER  
27. 6T-7066 [1] VALVE (BRAKE CONTROL RELIEF)  
28. 6T-7067 [1] SEAT  
29. 4J-6555 [1] SPRING  
30. 1J-8497 [1] VALVE (BRAKE CONTROL CHECK)  
31. 8M-5127 [1] SEAL-O-RING  
32. 3T-5681 [1] SEAT  
33. 5M-6228 [1] BEARING AS-NEEDLE  
34. 2M-1672 [1] BEARING AS-NEEDLE  
35. 6T-7130 [1] SHAFT  
36. 152-1310 [1] SEAL-LIP TYPE  
37. 6V-3965 [4] FITTING (QUICK DISCONNECT)  
38. 3P-3547 [3] RING-RETAINING  
39. 3T-6519 [6] ROLLER  
40. 5B-5620 [1] BOLT (5/16-18X2.125-IN)  
  6T-0861 [1] RETAINER  
41. 6Y-6564 [2] LEVER-CAMSHAFT  
42. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
  1Y-0462 [2] WASHER (0.328X0.81X0.125-IN THK)  
43. 3T-6521 [3] PIN  
44. 7G-3036 [2] SHAFT  
45. 143-4047 [3] SEAL-LIP TYPE  
46. 8B-4132 [6] BEARING AS-NEEDLE  
47. 3B-0623 [3] PLUG-CUP  
48. 7X-0288 [3] BOLT (3/8-16X1.625-IN)  
  8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
49. 9M-8186 [3] WASHER (0.906X1.75X0.14-IN THK)  
50. 3S-7005 [3] RING-LOCK  
51. 6V-7607 [1] WASHER-HARD (20X30X2.5-MM THK)  
52. 3T-6219 [1] SPACER (20.51X23.81X47.5-MM THK)  
53. 7G-3035 [1] SHAFT  
54. 3T-6520 [1] LEVER  
55. 5M-9624 B [12] SHIM (0.25-MM THK)  
  5M-9623 B [12] SHIM (0.9-MM THK)  
  5M-9622 B [16] SHIM (1.6-MM THK)  
56. 3T-6822 B [2] SPACER (10X17.5X1.8-MM THK)  
  7G-3177 B [2] SHIM (0.8-MM THK)  
  7G-3046 B [8] SHIM (0.25-MM THK)  
57. 7T-7970 [2] SPRING  
58. 6T-8248 [2] WASHER  
59. 6L-8598 [2] RING-RETAINING  
60. 9W-8248 [2] PLUNGER  
61. 3T-0647 [2] PLUNGER  
62. 7T-1113 [4] SPRING  
63. 3P-3202 [2] SPRING  
64. 7T-1114 [2] SPOOL AS  
    (EACH INCLUDES)
  7T-1115 [1] SPOOL  
  6T-1310 [1] SEAT  
  4M-2381 [1] SPRING  
65. 4B-9880 [1] BALL  
66. 1S-1638 [1] RING-RETAINING  
67. 9W-5606 [2] SPOOL AS  
    (EACH INCLUDES)
  7T-1117 [1] SPOOL  
  6T-1310 [1] SEAT  
  4M-2381 [1] SPRING  
68. 1S-1638 [1] RING-RETAINING  
69. 4B-9880 B [1] BALL  
70. 7G-3046 B [2] SHIM (0.25-MM THK)  
  7G-3177 B [5] SHIM (0.8-MM THK)  
71. 6Y-6562 [1] SPRING  
72. 9W-5605 [1] RETAINER  
73. 6L-8598 [1] RING-RETAINING  
74. 7T-1112 [4] SPRING  
75. 7T-1111 [4] PLUG  
  7M-8485 [4] SEAL-O-RING  
76. 6I-9522 [2] SPRING  
  B   USE AS REQUIRED
 

#SEBP24850381
 

228-0320: CYLINDER GP-ANGLING

228-0320 CYLINDER GP-ANGLING -BULLDOZER
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
101.6-MM (4-IN) BORE X 490-MM (19.29-IN) STROKE
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 133-9154, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
FIELD REPLACEMENT ORDER @@@@@321-7048@@@@@
AN ATTACHMENT
i01827416 SEBP2485
2280320 CYLINDER GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
2. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
3. 122-9921 [1] PISTON AS  
3A. 8C-9160 [1] SEAL AS  
3B. 8N-5083 [1] SPRING  
3C. 112-6142 [1] PLUNGER  
3D. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
4. 175-7900 J [1] SEAL-O-RING  
5. 2K-6830 J [1] RING-BACKUP  
6. 135-7393 [1] HEAD AS  
  167-2457 [1] SEAL-WIPER  
7. 228-0321 [1] ROD AS  
7A. 2H-5549 [2] RING-RETAINING  
7B. 4D-4431 [1] BEARING-ALIGNING  
8. 229-9382 J [1] SEAL-WIPER  
9. 167-2304 J [1] SEAL-U-CUP  
10. 167-2195 J [1] SEAL AS-BUFFER  
11. 110-3787 [1] CYLINDER AS  
11A. 9T-7045 [1] ELBOW  
11B. 2H-5549 [2] RING-RETAINING  
11C. 4D-4431 [1] BEARING-ALIGNING  
12. 4T-5613 J [1] RING-WEAR  
13. 6J-2797 J [1] RING-WEAR  
   
   
    AVAILABLE REPAIR KIT(S):
  240-9538 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850382
 

321-7048: CYLINDER GP-ANGLING

321-7048 CYLINDER GP-ANGLING -BULLDOZER
S/N 3XP1-UP; 4MP1-UP
101.6-MM (4-IN) BORE X 472-MM (18.6-IN) STROKE
FIELD REPLACEMENT FOR @@@@@228-0320@@@@@
i02885321 SEBP2485
3217048 CYLINDER GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 321-7046 [1] CYLINDER AS-HYDRAULIC  
1A. 2H-5549 [2] RING-RETAINING  
1B. 4D-4431 [1] BEARING-ALIGNING  
2. 321-7044 [1] ROD AS-HYDRAULIC CYLINDER  
  4D-4431 [1] BEARING-ALIGNING  
3. 122-9921 [1] PISTON AS  
3A. 8C-9160 J [1] SEAL AS  
3B. 8N-5083 [1] SPRING  
3C. 112-6142 [1] PLUNGER  
3D. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
3E. 122-9919 [1] PLUNGER  
4. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
5. 135-7393 [1] HEAD AS  
  229-9382 [1] SEAL-WIPER  
6. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
7. 6J-2797 J [1] RING-WEAR  
8. 9X-4611 J [1] SEAL-O-RING  
9. 2K-6830 J [1] RING-BACKUP  
10. 308-1845 J [1] SEAL-WIPER  
11. 289-2946 J [1] SEAL-U-CUP  
12. 289-2935 J [1] SEAL AS-BUFFER  
13. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  261-8566 J [1] KIT-HYD CYLINDER SEAL  
    (ASLO INCLUDES SEAL-O RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850383
 

110-3269: CYLINDER GP-BULLDOZER LIFT

110-3269 CYLINDER GP-BULLDOZER LIFT
S/N 3XP1-UP; 4MP1-UP
114.3-MM (4.5-IN) BORE X 430-MM (17-IN) STROKE
PART OF 107-5599, 107-5600, 121-0406, 126-5209 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00470402 SEBP2485
1103269 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-3270 [1] CYLINDER AS  
  6E-5449 [1] BEARING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 9X-7269 [1] SEAL AS  
5. 4J-3745 [1] RING-WEAR  
6. 6E-3569 [1] PISTON  
7. 175-7902 [1] SEAL-O-RING  
8. 1K-7095 [1] RING-BACKUP  
9. 6E-3570 [1] HEAD  
10. 110-3271 [1] ROD AS  
  6E-5449 [1] BEARING  
11. 8T-4958 [1] RING-WEAR  
12. 167-2459 [1] SEAL-WIPER  
13. 167-2307 [1] SEAL-U-CUP  
14. 167-2200 [1] SEAL AS  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850384
 

110-3269: CYLINDER GP-BULLDOZER LIFT

110-3269 CYLINDER GP-BULLDOZER LIFT
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
114.3-MM (4.5-IN) BORE X 430-MM (17-IN) STROKE
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01707666 SEBP2485
1103269 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-3270 [1] CYLINDER AS  
1A. 6E-5449 [1] BEARING  
2. 173-9683 CM [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 495-8197 [1] SEAL AS  
5. 4J-3745 J [1] RING-WEAR  
6. 6E-3569 [1] PISTON  
7. 175-7902 C [1] SEAL-O-RING  
8. 1K-7095 J [1] RING-BACKUP  
9. 6E-3570 [1] HEAD  
10. 110-3271 [1] ROD AS  
10A. 6E-5449 [1] BEARING  
11. 231-3538 CJ [1] SEAL-WIPER  
12. 421-4024 CJ [1] SEAL-U-CUP  
13. 167-2200 CJ [1] SEAL AS  
14. 8T-4958 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  241-7584 J [1] KIT-SEAL  
    (INCLUDES RINGS, SEALS & SEAL ASSEMBLY)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850385
 

115-3524: CYLINDER GP-BULLDOZER LIFT

115-3524 CYLINDER GP-BULLDOZER LIFT
S/N 9ZM1-UP; 2SP1-UP
95.25-MM (3.75-IN) BORE X 720-MM (28.3-IN) STROKE
PART OF 138-7032 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00492062 SEBP2485
1153524 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-8011 [1] SEAL AS  
2. 8J-6245 [1] RING-WEAR  
3. 8T-4958 [1] RING-WEAR  
4. 2H-4145 [1] SEAL-O-RING  
5. 1S-0669 [1] RING (BACKUP)  
6. 8T-0070 M [4] BOLT (M20X2.5X120-MM)  
7. 6V-7742 M [4] NUT-FULL (M20X2.5-THD)  
8. 4J-0121 [1] CAP AS-BEARING  
9. 8E-5703 B [16] SHIM (0.8-MM THK)  
10. 115-8219 [1] ROD AS  
11. 8J-6020 [1] CROWN  
12. 6E-1410 [1] HEAD  
13. 115-8218 [1] CYLINDER AS  
14. 1K-6985 [2] RING-RETAINING  
15. 9J-7964 [1] BEARING-SPHERICAL  
16. 167-2200 [1] SEAL AS  
17. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(BULLDOZER LIFT CYLINDER)  
18. 115-8225 [1] PISTON  
19. 9X-8399 [1] WASHER (33X56X6-MM THK)  
20. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
21. 167-2459 [1] SEAL-WIPER  
22. 167-2307 [1] SEAL-U-CUP  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24850386
 

1U-1839: CYLINDER GP-BULLDOZER LIFT

1U-1839 CYLINDER GP-BULLDOZER LIFT
S/N 8FP1-UP
95.25-MM (3.75-IN) BORE X 700-MM (27.55-IN) STROKE
PART OF 5Q-7870 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00353867 SEBP2485
1U1839 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
3. 8J-6245 [1] RING-WEAR  
4. 5J-8011 [1] SEAL AS  
5. 2H-4145 [1] SEAL-O-RING  
6. 1S-0669 [1] RING (BACKUP)  
7. 8E-5703 B [16] SHIM (0.8-MM THK)  
8. 231-3538 [1] SEAL-WIPER  
9. 1U-1836 [1] ROD AS  
10. 8J-6020 [1] CROWN  
11. 167-2307 [1] SEAL-U-CUP  
12. 167-2200 [1] SEAL AS  
13. 6E-1410 [1] HEAD  
14. 1U-1838 [1] CYLINDER AS  
14A. 1K-6985 [2] RING-RETAINING  
14B. 7J-9288 [2] BOSS  
14C. 8J-1196 [1] LUG (3/8-16-THD)  
14D. 9J-7964 [1] BEARING-SPHERICAL  
15. 8J-6016 [1] PISTON  
16. 5P-8250 [1] WASHER (28X49X5-MM THK)  
17. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
18. 4J-0121 [1] CAP AS-BEARING  
19. 7X-0372 [4] BOLT (3/4-10X4.25-IN)  
20. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
21. 8T-4958 [1] RING-WEAR  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850387
 

137-5107: CYLINDER GP-HYDRAULIC

137-5107 CYLINDER GP-HYDRAULIC -ANGLING
S/N 3XP1-UP; 4MP1-UP
101.6-MM (4-IN) BORE X 472-MM (18.6-IN) STROKE
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 133-9154, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00506739 SEBP2485
1375107 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
2. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
3. 122-9921 [1] PISTON AS  
3A. 122-9919 [1] PLUNGER  
3B. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
3C. 8N-5083 [1] SPRING  
3D. 112-6142 [1] PLUNGER  
3E. 8C-9160 [1] SEAL AS  
4. 9X-4611 [1] SEAL-O-RING  
5. 2K-6830 J [1] RING-BACKUP  
6. 135-7393 [1] HEAD AS  
7. 137-5106 [1] ROD AS  
7A. 2H-5549 [2] RING-RETAINING  
7B. 4D-4431 [1] BEARING-ALIGNING  
8. 8J-0484 [1] RING-RETAINING  
9. 8C-9124 J [1] SEAL AS  
10. 5J-8200 J [1] SEAL-U-CUP  
11. 8C-9133 [1] SEAL  
12. 110-3787 [1] CYLINDER AS  
12A. 9T-7045 [1] ELBOW  
12B. 2H-5549 [2] RING-RETAINING  
12C. 4D-4431 [1] BEARING-ALIGNING  
13. 4T-5613 J [1] RING-WEAR  
   
   
    AVAILABLE REPAIR KIT(S):
  240-9538 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850388
 

152-6485: CYLINDER GP-HYDRAULIC

152-6485 CYLINDER GP-HYDRAULIC -ANGLING
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
101.6-MM (4-IN) BORE X 472-MM (18.6-IN) STROKE
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 133-9154, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
i00816429 SEBP2485
1526485 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
2. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
3. 122-9921 [1] PISTON AS  
4. 8C-9160 [1] SEAL AS  
  8N-5083 [1] SPRING  
  112-6142 [1] PLUNGER  
5. 9X-4611 [1] SEAL-O-RING  
6. 2K-6830 J [1] RING-BACKUP  
7. 135-7393 [1] HEAD AS  
8. 152-6486 [1] ROD AS  
  2H-5549 [2] RING-RETAINING  
9. 4D-4431 [1] BEARING-ALIGNING  
10. 8J-0484 [1] RING-RETAINING  
11. 8C-9133 [1] SEAL  
12. 5J-8200 J [1] SEAL-U-CUP  
13. 8C-9124 J [1] SEAL AS  
14. 110-3787 [1] CYLINDER AS  
  9J-0398 [1] BOSS  
15. 4D-4431 [1] BEARING-ALIGNING  
16. 2H-5549 [2] RING-RETAINING  
17. 4T-5613 J [1] RING-WEAR  
18. 6J-2797 J [1] RING-WEAR  
   
   
    AVAILABLE REPAIR KIT(S):
  240-9538 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24850389
 

152-6485: CYLINDER GP-HYDRAULIC

152-6485 CYLINDER GP-HYDRAULIC -ANGLING
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
101.6-MM (4-IN) BORE X 472-MM (18.6-IN) STROKE
PART OF 107-5600, 121-0406, 126-5209, 133-9154, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
i01781044 SEBP2485
1526485 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-2175 [1] BOLT (1-1/8-7X3.5-IN)  
2. 110-6501 [1] WASHER-HARD (31X57X6-MM THK)  
3. 122-9921 [1] PISTON AS  
3A. 122-9919 [1] PLUNGER  
3B. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
3C. 8N-5083 [1] SPRING  
3D. 112-6142 [1] PLUNGER  
3E. 8C-9160 J [1] SEAL AS  
4. 175-7900 J [1] SEAL-O-RING  
5. 2K-6830 J [1] RING-BACKUP  
6. 135-7393 [1] HEAD AS  
  229-9382 J [1] SEAL-WIPER  
7. 152-6486 [1] ROD AS  
7A. 2H-5549 [2] RING-RETAINING  
7B. 4D-4431 [1] BEARING-ALIGNING  
8. 308-1845 J [1] SEAL-WIPER  
9. 289-2946 J [1] SEAL-U-CUP  
10. 289-2935 J [1] SEAL AS-BUFFER  
11. 311-5868 [1] CYLINDER AS  
11A. 2H-5549 [2] RING-RETAINING  
11B. 4D-4431 [1] BEARING-ALIGNING  
11C. 9T-7045 [1] ELBOW  
12. 4T-5613 J [1] RING-WEAR  
13. 6J-2797 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  240-9538 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog D6M :

CLUTCH & BRAKE GP-STEERING
135-8615 CLUTCH & BRAKE GP-STEERING
CLUTCH & BRAKE GP-STEERING
135-8613 CLUTCH & BRAKE GP-STEERING
CLUTCH & BRAKE GP-STEERING
135-8612 CLUTCH & BRAKE GP-STEERING
203-3032 UNDERCARRIAGE GP
198-9798 UNDERCARRIAGE GP
198-9788 UNDERCARRIAGE GP
119-6914 UNDERCARRIAGE GP
118-6347 UNDERCARRIAGE GP
CYLINDER GP-ANGLING
228-0320 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
321-7048 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
110-3269 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
110-3269 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
115-3524 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-1839 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-HYDRAULIC
137-5107 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
152-6485 CYLINDER GP-HYDRAULIC

Truck sale:

Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
 
56,500 
Caterpillar D6M, Crawler dozers, Construction


 
 
Caterpillar D6M, Construction
- Crawler dozers
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.