WORK TOOLS
BLADE GPWORK TOOLS
BLADE GP
#SEBP24850600
112-7446: BLADE GP-ANGLING
112-7446 BLADE GP-ANGLING
S/N 4MP1-UP
PART OF 107-5600, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 4MP1-UP
PART OF 107-5600, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 8J-8905 | [1] | RING-LOCK | |
| 11. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 112-7447 | [1] | BLADE AS-ANGLING | |
| 14A. | 8P-9770 | [1] | PLATE | |
| 14B. | 110-5227 | [1] | BRACKET AS (CENTER) | |
| 14C. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 14D. | 112-9060 | [1] | BRACKET AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850601
137-8729: BLADE GP-ANGLING
137-8729 BLADE GP-ANGLING
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-3827 | [1] | BLADE AS-ANGLING | |
| 1A. | 240-1557 | [1] | BRACKET AS | |
| 1B. | 250-5481 | [2] | BRACKET AS | |
| 1C. | 250-5482 | [1] | BRACKET AS | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 10. | 8J-8905 | [1] | RING-LOCK | |
| 11. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850602
137-8729: BLADE GP-ANGLING
137-8729 BLADE GP-ANGLING
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-9397 C | [1] | BLADE AS-ANGLING | |
| 1A. | 240-1557 | [1] | BRACKET AS | |
| 1B. | 250-5481 | [2] | BRACKET AS | |
| 1C. | 250-5482 | [1] | BRACKET AS | |
| 1D. | 8P-9770 | [1] | PLATE (BLADE) | |
| 1E. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 1F. | 112-9060 | [1] | BRACKET AS | |
| 1G. | 296-9398 | [1] | BRACKET AS | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 10. | 266-9599 C | [1] | RETAINER | |
| 11. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 15. | 9X-8271 CM | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850603
137-8729: BLADE GP-ANGLING
137-8729 BLADE GP-ANGLING
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 3
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
S/N 4MP1-UP
PART OF 126-5209 BULLDOZER AR-PWR ANGLE & TILT
Type 3
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-9397 | [1] | BLADE AS-ANGLING | |
| 1A. | 240-1557 | [1] | BRACKET AS | |
| 1B. | 250-5481 | [2] | BRACKET AS | |
| 1C. | 250-5482 | [1] | BRACKET AS | |
| 1D. | 8P-9770 | [1] | PLATE (BLADE) | |
| 1E. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 1F. | 112-9060 | [1] | BRACKET AS | |
| 1G. | 296-9398 | [1] | BRACKET AS | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 10. | 376-6434 C | [1] | RETAINER | |
| 11. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 15. | 9X-8271 M | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850604
177-2001: BLADE GP-ANGLING
177-2001 BLADE GP-ANGLING
S/N BHB1-UP
PART OF 177-1998 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N BHB1-UP
PART OF 177-1998 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 134-2733 | [1] | BEARING-SELF-ALIGNING | ||
| 177-4200 Y | [1] | BLADE GP-ANGLING | ||
| 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | ||
| 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | ||
| 7X-2579 M | [2] | BOLT (M24X3X240-MM) | ||
| 177-4549 Y | [1] | EDGE GP-BIT & CUTTING | ||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 6V-7676 M | [2] | NUT (M24X3-THD) | ||
| 3G-8932 | [2] | PIN | ||
| 104-4817 | [2] | PIN | ||
| 4T-0231 | [2] | RETAINER | ||
| 104-7434 | [2] | RETAINER | ||
| 8J-8905 | [1] | RING-LOCK | ||
| 8G-5747 | [4] | SPACER (45X50X15-MM THK) | ||
| 089-8249 | [4] | SPACER (64X72X13-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850605
177-2002: BLADE GP-ANGLING
177-2002 BLADE GP-ANGLING
S/N BHK1-UP
PART OF 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N BHK1-UP
PART OF 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 134-2733 | [1] | BEARING-SELF-ALIGNING | ||
| 177-4201 Y | [1] | BLADE GP-ANGLING | ||
| 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | ||
| 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | ||
| 7X-2579 M | [2] | BOLT (M24X3X240-MM) | ||
| 177-4549 Y | [1] | EDGE GP-BIT & CUTTING | ||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 6V-7676 M | [2] | NUT (M24X3-THD) | ||
| 3G-8932 | [2] | PIN | ||
| 104-4817 | [2] | PIN | ||
| 4T-0231 | [2] | RETAINER | ||
| 104-7434 | [2] | RETAINER | ||
| 8J-8905 | [1] | RING-LOCK | ||
| 8G-5747 | [4] | SPACER (45X50X15-MM THK) | ||
| 089-8249 | [4] | SPACER (64X72X13-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24850606
177-4200: BLADE GP-ANGLING
177-4200 BLADE GP-ANGLING
S/N BHB1-UP
PART OF 177-2001 BLADE GP-ANGLING
AN ATTACHMENT
S/N BHB1-UP
PART OF 177-2001 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 177-2946 | [1] | BLADE AS | |
| 3. | 177-4548 | [4] | PIN | |
| 4. | 178-6875 | [6] | RETAINER | |
| 5. | 178-6896 | [2] | BAR | |
| 6. | 178-6897 | [4] | PIN | |
| 7. | 178-6898 | [6] | SPACER | |
| 8. | 179-6702 | [1] | BLADE AS | |
| 9. | 185-9243 | [1] | BLADE AS-ANGLING | |
| 8P-9770 | [1] | PLATE | ||
| 137-3824 | [1] | BRACKET AS | ||
| 10. | 128-0883 | [2] | FLANGE | |
| 11. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4956 M | [18] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
#SEBP24850607
177-4201: BLADE GP-ANGLING
177-4201 BLADE GP-ANGLING
S/N BHK1-UP
FOLDABLE
PART OF 177-2002 BLADE GP-ANGLING
AN ATTACHMENT
S/N BHK1-UP
FOLDABLE
PART OF 177-2002 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 177-2946 | [1] | BLADE AS | |
| 3. | 177-4202 | [1] | BLADE AS-ANGLING | |
| 8P-9770 | [1] | PLATE | ||
| 110-5227 | [1] | BRACKET AS (CENTER) | ||
| 4. | 177-4548 | [4] | PIN | |
| 5. | 178-6875 | [6] | RETAINER | |
| 6. | 178-6896 | [2] | BAR | |
| 7. | 178-6897 | [4] | PIN | |
| 8. | 178-6898 | [6] | SPACER | |
| 9. | 179-6702 | [1] | BLADE AS | |
| 10. | 128-0883 | [2] | FLANGE | |
| 11. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4956 M | [18] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
#SEBP24850608
222-3418: BLADE GP-ANGLING
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8074 | [2] | WASHER (9.52-MM THK) | |
| 2. | 2G-5676 | [32] | WASHER (1.781X4X0.06-IN THK) | |
| 3. | 3B-8489 | [10] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 4T-0231 | [2] | RETAINER | |
| 6. | 177-4548 | [2] | PIN | |
| 7. | 209-6096 | [2] | PIN | |
| 8. | 209-6097 | [2] | PIN | |
| 9. | 209-6098 | [4] | PLATE | |
| 10. | 219-9870 | [1] | EXTRACTOR GP-PIN | |
| 11. | 222-3407 | [1] | PLATE AS | |
| 12. | 222-3408 | [1] | PLATE AS | |
| 13. | 222-3411 | [1] | BLADE AS (LH) | |
| 14. | 222-3412 | [1] | BLADE AS (RH) | |
| 15. | 223-1889 | [1] | BLADE AS-ANGLING | |
| 16. | 224-0160 | [2] | PLATE | |
| 17. | 224-6121 | [2] | PIN AS | |
| 18. | 5D-5498 | [4] | BUSHING | |
| 19. | 5F-3092 | [4] | SEAL-O-RING | |
| 20. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 21. | 7D-1649 | [2] | WASHER-HARD (13.5X32X5-MM THK) | |
| 22. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 23. | 8T-4223 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4956 M | [12] | BOLT (M12X1.75X35-MM) | |
| 25. | 6V-7676 M | [2] | NUT (M24X3-THD) | |
| 26. | 7X-2579 M | [2] | BOLT (M24X3X240-MM) | |
| M | METRIC PART | |||
#SEBP24850609
5Q-8052: BLADE GP-STRAIGHT
5Q-8052 BLADE GP-STRAIGHT
S/N 8FP1-UP
PART OF 5Q-7870 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
S/N 8FP1-UP
PART OF 5Q-7870 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
For full view, you need register
