AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-5953 VALVE GP-CONTROL -BULLDOZER LIFT S/N 3WN1-UP; 4JN1-UP PART OF 121-0934 VALVE GP-BANK, 6E-5083 VALVE GP-BANK 2 AN ATTACHMENT D6M


HYDRAULIC SYSTEM
VALVE GP-CONTROL
VALVE GP-MAKEUP
PUMP GP
VALVE GP-RELIEF
VALVE GP-SOLENOID
IMPLEMENTS
BULLDOZER GP

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 3WN
 D6M TRACK-TYPE TRACTOR XL, LGP 3WN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2486 D6M 3WN   (1995)

HYDRAULIC SYSTEM

VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4954 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4955 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-5953 VALVE GP-CONTROL
 

#SEBP24860480
 

6E-5953: VALVE GP-CONTROL

6E-5953 VALVE GP-CONTROL -BULLDOZER LIFT
S/N 3WN1-UP; 4JN1-UP
PART OF 121-0934 VALVE GP-BANK, 6E-5083 VALVE GP-BANK 2
AN ATTACHMENT
i00402263 SEBP2486
6E5953 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 8S-4710 [2] BOLT (1/4-20X4-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 4T-4525 [1] VALVE GP-CHECK  
5. 4T-4513 [1] SPRING  
6. 100-3567 [1] HOUSING-DETENT  
7. 128-2776 [1] GASKET  
8. 100-3566 [1] PISTON-DETENT  
9. 4B-9782 [1] BALL  
10. 4T-4532 [1] HOUSING  
11. 144-4277 [1] SHAFT AS-DETENT  
12. 100-3564 [1] SPRING  
13. 4T-4521 [2] RETAINER  
14. 100-3563 [1] SPACER  
15. 8F-0212 [1] SEAL-O-RING  
16. 7F-8607 [2] SEAL-O-RING  
17. 4T-4534 [1] SPRING (OUTER)  
18. 9T-3729 [1] SPRING (INNER)  
19. 2M-9780 [1] SEAL-O-RING  
20. 9S-8006 [1] PLUG (7/8-14-THD)  
21. 4T-4520 [1] WASHER-SPECIAL (CONTROL VALVE)  
22. 4T-4528 [1] RETAINER  
23. 4T-4526 [1] SEAT  
24. 7J-0204 [1] SEAL-O-RING  
25. 8T-2360 [1] SEAL-O-RING  
26. 5B-9318 [7] BALL  
27. 8T-2361 [1] SEAL-O-RING  
28. 1P-7363 [1] SEAL-O-RING  
29. 3J-7354 [1] SEAL-O-RING  
30. 1U-2744 [1] VALVE GP-CHECK (CONTROL VALVE)  
31. 5K-9090 [1] SEAL-O-RING  
32. 4T-7795 [1] RING-BACKUP  
33. 4K-1388 [1] SEAL-O-RING  
34. 3D-2824 [1] SEAL-O-RING  
35. 9T-0704 [1] VALVE GP-RELIEF (LINE)(CONTROL VALVE)  
36. 6E-0358 [1] RING-BACKUP  
37. 4K-1388 [1] SEAL-O-RING  
38. 8C-3088 [1] SEAL-O-RING  
 

#SEBP24860481
 

6E-5653: VALVE GP-MAKEUP

6E-5653 VALVE GP-MAKEUP
S/N 3WN1-817; 4JN1-532
PART OF 121-0934, 6E-4950 VALVE GP-BANK, 6E-5083 VALVE GP-BANK 2
ALSO AN ATTACHMENT
i00401883 SEBP2486
6E5653 VALVE GP-MAKEUP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0657 [1] PLUG  
2. 4K-1388 [1] SEAL-O-RING  
3. 9T-6694 [1] SPRING  
4. 7M-1201 [1] DOWEL  
 

#SEBP24860482
 

9T-6695: VALVE GP-MAKEUP

9T-6695 VALVE GP-MAKEUP
S/N 3WN818-UP; 4JN533-UP
PART OF 121-0934, 6E-4950 VALVE GP-BANK, 209-6768, 6E-5083 VALVE GP-BANK 2, 209-6765 VALVE GP-BANK 3, 209-6764 VALVE GP-BANK 4
ALSO AN ATTACHMENT
i00435438 SEBP2486
9T6695 VALVE GP-MAKEUP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0657 [1] PLUG  
2. 4K-1388 [1] SEAL-O-RING  
3. 9T-6694 [1] SPRING  
4. 7M-1201 [1] DOWEL  
 

#SEBP24860483
 

100-2812: VALVE GP-PUMP CONTROL

100-2812 VALVE GP-PUMP CONTROL -IMPLEMENT
S/N 3WN1-UP; 4JN1-UP
PART OF 107-8136 PUMP GP-PISTON
i00459614 SEBP2486
1002812 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [3] SEAL-O-RING  
3. 6E-4241 [1] SPOOL-MARGIN  
4. 9T-2186 [2] PLUG  
5. 6E-4239 [1] SPOOL-CUTOFF  
6. 6E-4230 [2] GUIDE-SPRING  
7. 6E-4228 [1] SPRING  
8. 6E-6140 [1] PLUG-COMPENSATOR  
9. 033-6036 [1] SEAL-O-RING  
10. 9X-8914 M [2] SETSCREW-SOCKET (M8X1.25X45-MM)  
11. 6E-6142 [1] PLUG-MARGIN  
12. 033-6027 [1] SEAL-O-RING  
13. 6E-4246 [1] SPRING-MARGIN  
14. 6E-4318 [1] PIN-SPRING STOP  
15. 6E-4242 [2] GUIDE-SPRING  
16. 6E-6141 [2] LOCKNUT-SEALING  
17. 6E-4229 [1] BODY-COMPENSATOR  
  M   METRIC PART
 

#SEBP24860484
 

6E-0772: VALVE GP-RELIEF

6E-0772 VALVE GP-RELIEF -LINE, BLADE ANGLE
S/N 3WN1-UP; 4JN1-UP
PART OF 6E-4954 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00396602 SEBP2486
6E0772 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING  
2. 6E-0358 [1] RING-BACKUP  
3. 5K-9090 [1] SEAL-O-RING  
 

#SEBP24860485
 

186-1526: VALVE GP-SOLENOID

186-1526 VALVE GP-SOLENOID
S/N 3WN1-3086; 4JN1-2939
FIELD REPLACEMENT FOR @@@@@136-1679@@@@@
i01494088 SEBP2486
1861526 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 234-6666 J [1] CARTRIDGE AS-VALVE  
2. 104-3947 [1] LOCKNUT (5/8-11-THD)  
3. 240-6822 [1] COIL AS  
4. 1S-9593 [2] STRAP-CABLE  
5. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
7. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
   
    AVAILABLE REPAIR KIT(S):
  7T-4515 J KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES SEAL-O-RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP24860486
 

107-5599: BULLDOZER AR-PWR ANGLE & TILT

107-5599 BULLDOZER AR-PWR ANGLE & TILT
S/N 3XP1-UP
ADJUSTABLE PITCH
CANNOT BE USED WITH 156-9511 HYDRAULIC AR, 156-9510 HYDRAULIC AR
AN ATTACHMENT
i01581541 SEBP2486
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5230 Y [1] BLADE GP-ANGLING  
  110-5226 Y [1] C-FRAME GP-POWER ANGLING  
  110-3269 Y [2] CYLINDER GP-BULLDOZER LIFT  
  137-5107 Y [2] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  228-0320 Y [2] CYLINDER GP-ANGLING  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  151-4518 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  110-6113 Y [1] LINES GP-ANGLE & TILT  
  111-4626 Y [1] LINES GP-LIFT CYLINDER  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
  134-6775 Y [1] PIN GP-CYLINDER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON BACK OF MOLDBOARD NEAR TOP AT RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  107-8126 [2] BEARING (FRAME)  
    (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO THE INSTALLATION OF C-FRAME)
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860487
 

107-5600: BULLDOZER AR-PWR ANGLE & TILT

107-5600 BULLDOZER AR-PWR ANGLE & TILT
S/N 4MP1-UP
WITH ADJUSTABLE PITCH-LGP
AN ATTACHMENT
i02991711 SEBP2486
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-7446 Y [1] BLADE GP-ANGLING  
  112-7443 Y [1] C-FRAME GP-POWER ANGLING  
  137-5107 Y [2] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  152-6485 Y [2] CYLINDER GP-HYDRAULIC (ANGLING)  
    -OR-
  228-0320 Y [2] CYLINDER GP-ANGLING  
  110-3269 Y [2] CYLINDER GP-BULLDOZER LIFT  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  151-4518 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  112-3447 Y [1] LINES GP-ANGLE & TILT  
  111-4626 Y [1] LINES GP-LIFT CYLINDER  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
  134-6775 Y [1] PIN GP-CYLINDER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON BACK OF MOLDBOARD NEAR TOP AT THE RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  107-8126 [2] BEARING (FRAME)  
    (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860488
 

121-0406: BULLDOZER AR-PWR ANGLE & TILT

121-0406 BULLDOZER AR-PWR ANGLE & TILT
S/N 3XP1-UP
FINE GRADING
AN ATTACHMENT
i02148502 SEBP2486
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5230 Y [1] BLADE GP-ANGLING  
  112-7443 Y [1] C-FRAME GP-POWER ANGLING  
  137-5107 Y [2] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  152-6485 Y [2] CYLINDER GP-HYDRAULIC  
    -OR-
  228-0320 Y [2] CYLINDER GP-ANGLING  
  110-3269 Y [2] CYLINDER GP-BULLDOZER LIFT  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  151-4518 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  112-3447 Y [1] LINES GP-ANGLE & TILT  
  111-4626 Y [1] LINES GP-LIFT CYLINDER  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
  134-6775 Y [1] PIN GP-CYLINDER  
   
  107-8126 [2] BEARING (SPECIAL)  
    (PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860489
 

126-5209: BULLDOZER AR-PWR ANGLE & TILT

126-5209 BULLDOZER AR-PWR ANGLE & TILT
S/N 4MP1-UP
ADJUSTABLE PITCH-LOW GROUND PRESSURE-FINE GRADING
AN ATTACHMENT
i02148503 SEBP2486
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  137-8729 Y [1] BLADE GP-ANGLING  
  112-7443 Y [1] C-FRAME GP-POWER ANGLING  
  110-3269 Y [2] CYLINDER GP-BULLDOZER LIFT  
  137-5107 Y [2] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  152-6485 Y [2] CYLINDER GP-HYDRAULIC  
    -OR-
  228-0320 Y [2] CYLINDER GP-ANGLING  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  151-4518 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  112-3447 Y [1] LINES GP-ANGLE & TILT  
  111-4626 Y [1] LINES GP-LIFT CYLINDER  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
  134-6775 Y [1] PIN GP-CYLINDER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON BACK OF MOLDBOARD NEAR TOP AT RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  107-8126 [2] BEARING (FRAME)  
    (BEARING MYST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
  109-0959 [4] RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6M :

VALVE GP-CONTROL
6E-4955 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4954 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4953 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4952 VALVE GP-CONTROL
VALVE GP-CONTROL
209-6762 VALVE GP-CONTROL
VALVE GP-CONTROL
209-6761 VALVE GP-CONTROL
VALVE GP-CHECK
129-1101 VALVE GP-CHECK
VALVE GP-BANK 4
209-6764 VALVE GP-BANK 4
VALVE GP-MAKEUP
6E-5653 VALVE GP-MAKEUP
VALVE GP-MAKEUP
9T-6695 VALVE GP-MAKEUP
VALVE GP-PUMP CONTROL
100-2812 VALVE GP-PUMP CONTROL
VALVE GP-RELIEF
6E-0772 VALVE GP-RELIEF
VALVE GP-SOLENOID
186-1526 VALVE GP-SOLENOID
107-5599 BULLDOZER AR-PWR ANGLE & TILT
107-5600 BULLDOZER AR-PWR ANGLE & TILT
121-0406 BULLDOZER AR-PWR ANGLE & TILT

Truck sale:

Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
 
56,500 
Caterpillar D6M, Crawler dozers, Construction


 
 
Caterpillar D6M, Construction
- Crawler dozers
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.