AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-5604 SWIVEL GP S/N 9TN1-1047 PART OF 106-4787 LINES GP-HYDRAULIC 140H NA MOTOR GRADER


HYDRAULIC SYSTEM
SWIVEL GP
TANK GP
SHAFT GP
VALVE & LINKAGE GP

MOTOR GRADER 140H NA MOTOR GRADER 9TN
 140H Motor Grader 9TN00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2487 140H NA 9TN   (1996)

HYDRAULIC SYSTEM

SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
9T-5604 SWIVEL GP
 

#SEBP24870570
 

9T-5604: SWIVEL GP

9T-5604 SWIVEL GP
S/N 9TN1-1047
PART OF 106-4787 LINES GP-HYDRAULIC
i00125587 SEBP2487
9T5604 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 4K-1493 [2] SCREW-HOLLOW (1/2-13X1-IN)  
3. 8J-0380 [1] RETAINER  
4. 9T-5603 [1] BODY  
5. 8J-2331 [7] SEAL  
6. 2H-3928 [7] SEAL-O-RING  
7. 8J-0386 [1] ROTOR  
8. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 3H-0107 [4] SEAL-O-RING  
10. 8J-0377 [1] COVER  
11. 4J-9964 [2] SEAL  
12. 8J-2330 [2] SEAL  
  B   USE AS REQUIRED
 

#SEBP24870571
 

214-1984: TANK & FILTER GP-HYDRAULIC

214-1984 TANK & FILTER GP-HYDRAULIC
S/N 9TN1454-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
i01747049 SEBP2487
2141984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
3. 2S-5100 [1] VALVE-MANUAL (HYDRAULIC TANK)  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 9J-1979 [1] RETAINER AS  
12. 9J-3047 [1] STRAINER (HYDRAULIC)  
13. 9M-7394 [1] LEVER  
14. 141-9661 [1] SPACER (20X128X6-MM THK)  
15. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
16. 214-1982 [1] TANK AS  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC)  
18. 086-0507 [1] PIN  
19. 1L-5072 [1] DOWEL  
20. 2D-4202 [1] PLATE  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 3G-0361 [1] GASKET (HYDRAULIC TANK FILL CAP)  
25. 7D-1195 [1] SEAL-O-RING  
26. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4611 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP24870572
 

9T-7984: TANK & FILTER GP-HYDRAULIC

9T-7984 TANK & FILTER GP-HYDRAULIC
S/N 9TN1-UP
PART OF 8X-2369 TANK & MTG GP-HYDRAULIC
i00125592 SEBP2487
9T7984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7985 [1] TANK AS  
2. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
3. 9J-1991 [1] HANDLE (HYDRAULIC FILTER COVER)  
4. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8X-5734 [1] PLATE  
7. 8X-5735 [1] PLATE  
8. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
9. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
10. 5D-1911 [1] COVER-HYDRAULIC CAP  
11. 9M-7394 [1] LEVER (HYDRAULIC CAP)  
12. 1L-5072 [1] DOWEL  
13. 0S-1594 [70] BOLT (3/8-16X1-IN)  
14. 2K-4973 [84] LOCKNUT (3/8-16-THD)  
16. 6E-2266 [1] ROD-THREADED  
17. 9J-1979 [1] RETAINER AS  
18. 8T-4896 [84] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 7D-1195 [1] SEAL-O-RING  
20. 9J-1988 [1] VALVE  
21. 9J-1985 [1] TUBE AS  
22. 1L-4349 [1] SPRING  
23. 3G-3498 [1] FLANGE  
24. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
25. 2S-5100 [1] VALVE-MANUAL  
26. 6E-2267 [1] CAP  
27. 6D-9157 [1] SEAL-O-RING  
28. 7H-1447 [1] CAP-FILLER (HYDRAULIC)  
29. 8T-2275 [1] BALL  
30. 2D-4202 [1] PLATE  
31. 9H-6454 [1] GASKET  
32. 3G-0361 [1] GASKET  
33. 9J-3047 [1] STRAINER (HYDRAULIC)  
34. 3G-2692 [1] RETAINER  
35. 6E-2169 [1] PLATE-INDICATOR  
36. 4J-8251 [1] GROMMET  
37. 4J-8252 [1] GAUGE-SIGHT  
38. 5D-0353 [2] BOLT-LOCKING (3/8-16X1-IN)  
39. 5H-6005 [2] SEAL-O-RING  
40. 5P-9119 BD GASKET-TAPE (ADHESIVE BACKED)  
41. 6E-2269 [1] COVER  
42. 141-9661 [1] SPACER (20X128X6-MM THK)  
43. 086-0507 [1] PIN  
44. 2J-7761 [1] RING-RETAINING  
45. 4D-7794 [3] CLIP  
46. 4M-6921 [1] WASHER-SPRING  
47. 9S-4183 [1] PLUG (1-1/16-12-THD)  
48. 3D-2824 [1] SEAL-O-RING  
49. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP24870573
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N 9TN1454-UP
PART OF 8W-6221 CHASSIS AR
i01707184 SEBP2487
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24870574
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 9TN1-1453
PART OF 8W-6221 CHASSIS AR
i00125501 SEBP2487
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
20. 1R-0722 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP24870575
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 9TN120-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00491052 SEBP2487
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
3. 027-1287 [1] FITTING-GREASE (PUMP DRIVE)  
4. 9K-2721 [2] LOCKWASHER  
5. 6G-6623 [1] SEAL  
6. 5H-3593 [1] RETAINER-FELT  
7. 6G-4358 [1] YOKE  
8. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP24870576
 

5Y-0769: UNIVERSAL JOINT GP-PUMP DRIVE

5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 9TN1-119
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00125215 SEBP2487
5Y0769 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-0766 [1] YOKE AS-SLIP  
2. 2Y-5755 [3] FITTING  
3. 5Y-0768 [1] YOKE  
4. 5Y-0767 [2] BEARING  
 

#SEBP24870577
 

107-3856: VALVE & LINKAGE GP

107-3856 VALVE & LINKAGE GP -BANK 5-RH-BANK 7-LH
S/N 9TN1-119
PART OF 107-3854 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125699 SEBP2487
1073856 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8W-0456 [3] SHAFT  
8. 8X-4277 [12] ROD AS  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
9A. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (WING LIFT)  
10A. 101-2458 [1] LEVER (BLADE TIP)  
10B. 101-2458 [1] LEVER (PLOW, DOZER)  
11. 8X-4279 [2] SPACER (84-MM THK)  
12. 8D-5640 [14] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [24] LOCKWASHER  
18. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
19. 8D-5641 [12] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
24A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
33. 2G-7108 [1] KNOB-WING TILT  
34. 103-1597 [1] LEVER (WING TILT)  
35. 2G-6740 [1] KNOB-RIPPER  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 104-7429 [2] PLATE  
44. 9D-2804 [1] SHAFT  
45. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
46. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
47. 2G-7107 [1] KNOB-WING LIFT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24870578
 

107-3856: VALVE & LINKAGE GP

107-3856 VALVE & LINKAGE GP -BANK 5-RH-BANK 7-LH
S/N 9TN120-UP
PART OF 107-3854 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02267117 SEBP2487
1073856 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8W-0456 [3] SHAFT  
8. 8X-4277 [12] ROD AS  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
9A. 8D-5633 [1] LEVER (WHEEL LEAN)  
10. 101-2458 [1] LEVER (WING LIFT)  
10A. 101-2458 [1] LEVER (BLADE TIP)  
10B. 101-2458 [1] LEVER (PLOW, DOZER)  
11. 137-4515 C [2] BUSHING  
12. 8D-5640 [14] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [24] LOCKWASHER  
18. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
19. 8D-5641 [12] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
24A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
33. 2G-7108 [1] KNOB-WING TILT  
34. 103-1597 [1] LEVER (WING TILT)  
35. 2G-6740 [1] KNOB-RIPPER  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 104-7429 [2] PLATE  
44. 137-4516 C [1] SHAFT  
45. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
47. 2G-7107 [1] KNOB-WING LIFT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24870579
 

112-5499: VALVE & LINKAGE GP

112-5499 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 9TN1-UP
PART OF 112-5510 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125779 SEBP2487
1125499 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER  
3. 8D-5634 [2] LEVER  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4276 [10] ROD  
  6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
44. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140H NA :

SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWASHPLATE GP
100-3416 SWASHPLATE GP
8X-9750 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
PUMP GP-PISTON
6E-3137 PUMP GP-PISTON
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP

Truck sale:

 
62,500 
Caterpillar 140HNA, Construction
- motor graders

Caterpillar 140HNA, Construction
115,000 
Caterpillar 140HNA, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 140HNA, Construction
75,000 
Caterpillar 140HNA, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140HNA, Construction
95,000 
Caterpillar 140HNA, Construction
- motor graders
NMC
Caterpillar 140HNA, Construction
120,000 
Caterpillar 140HNA, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.