AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

391-8256 KIT-CYLINDER HEAD GASKET S/N 5HM1-UP CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP FOR USE WITH @@@@@110-1607@@@@@, @@@@@266-9815@@@@@, @@@@@266-9815@@@@@ FIELD INSTALLATION 140H


BASIC ENGINE
CYLINDER HEAD GP
HOUSING GP-FRONT
LIFTING GP-ENGINE
AIR COMPRESSOR GP
MOUNTING GP-ENGINE
PAN GP-OIL
PISTON & ROD GP

MOTOR GRADER 140H MOTOR GRADER 5HM
 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2488 140H 5HM   (1996)

BASIC ENGINE

CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
CYLINDER HEAD GP
7N-8876 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
398-9357 KIT-CYLINDER HEAD
391-8256 KIT-CYLINDER HEAD GASKET
392-0637 KIT-CYLINDER HEAD GASKET
447-8653 KIT-CYLINDER HEAD GASKET
 

#SEBP24880040
 

391-8256: KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FOR USE WITH @@@@@110-1607@@@@@, @@@@@266-9815@@@@@, @@@@@266-9815@@@@@
FIELD INSTALLATION
i05106251 SEBP2488
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-2295 [4] BOLT (3/8-16X1.625-IN)  
  1H-7666 [1] GASKET  
  1P-0451 [1] GASKET (TURBOCHARGER)  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  5S-6735 [2] GASKET  
  7N-0200 [1] GASKET  
  7N-0944 [1] GASKET (WATER TEMPERATURE REGULATOR)  
  8H-9788 [1] GASKET  
  188-6126 [1] GASKET  
  111-8015 [1] GASKET AS-CYLINDER HEAD  
  2P-6132 [1] GASKET-ELBOW  
  9S-7083 [1] GASKET-INLET  
  9Y-1979 [3] GASKET-MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  115-7550 [1] GASKET-PLATE  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  2M-9780 [1] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  3S-5496 [2] SEAL-O-RING  
  4L-8337 [2] SEAL-O-RING  
  5M-5860 [2] SEAL-O-RING  
  5H-7704 [2] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  8M-4448 [1] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  133-1247 [1] SEAL-VALVE COVER  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
 

#SEBP24880041
 

392-0637: KIT-CYLINDER HEAD GASKET

392-0637 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@110-1607@@@@@
FIELD INSTALLATION
i06146420 SEBP2488
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
  9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
  1H-7666 [1] GASKET  
  1P-0451 [1] GASKET  
  5S-6735 [2] GASKET  
  7N-0200 [1] GASKET  
  7N-0944 [1] GASKET  
  2F-7761 [1] GASKET  
  188-6126 [1] GASKET  
  111-8015 [1] GASKET AS-CYLINDER HEAD  
  2P-6132 [1] GASKET-ELBOW  
  9Y-1979 [3] GASKET-MANIFOLD  
  1P-1255 [1] GASKET-OIL DRAIN  
  115-7550 [1] GASKET-PLATE  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  6N-0009 [1] RING-METAL SEAL  
  6N-0992 [1] RING-METAL SEAL  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  3K-0360 [2] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3S-5496 [2] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  8M-4448 [1] SEAL-O-RING  
  133-1247 [1] SEAL-VALVE COVER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP24880042
 

447-8653: KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
i06805361 SEBP2488
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
   
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP24880043
 

460-8225: KIT-FRONT COVER GASKET

460-8225 KIT-FRONT COVER GASKET
S/N 5HM1-UP
KIT CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@266-9815@@@@@
FIELD INSTALLATION
i05940042 SEBP2488
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1W-3900 [1] GASKET  
  2P-2720 [1] GASKET  
  6L-1883 [2] GASKET  
  8N-0110 [1] GASKET-FRONT PLATE  
  6N-7887 [1] GASKET-HOUSING COVER  
  2P-0220 [1] GASKET-PUMP  
  362-8853 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)  
  6V-9748 [1] SEAL-LIP TYPE  
  175-7900 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  2P-1692 [1] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  175-7904 [2] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP24880044
 

7N-9122: LIFTING GP-ENGINE

7N-9122 LIFTING GP-ENGINE
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR
i00125351 SEBP2488
7N9122 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-5314 [1] PLATE-LIFTING  
2. 8N-8721 [1] PLATE-LIFTING EYE  
3. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
  5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP24880045
 

128-0065: LINES GP-AIR COMPRESSOR

128-0065 LINES GP-AIR COMPRESSOR
S/N 5HM1-799
PART OF 126-5235 INSTALLATION AR-ENGINE
i00666323 SEBP2488
1280065 LINES GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9237 [4] ELBOW-FLARED  
2. 032-1269 [1] ELBOW  
3. 3B-7255 [3] BUSHING-REDUCER  
4. 7W-9553 [1] TUBE AS-OUTLET  
5. 4W-1309 I [1] HOSE AS  
6. 7E-6796 [1] TUBE AS  
7. 6K-1972 [1] ELBOW-FLARED  
8. 9N-3040 I [1] HOSE AS  
9. 2N-1287 [1] ELBOW-FLARED  
10. 9L-5254 [1] ELBOW  
11. 3P-1823 B [1] ADAPTER-PIPE  
12. 3B-7764 [1] BUSHING (REDUCING)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24880046
 

135-5094: LINES GP-AIR COMPRESSOR

135-5094 LINES GP-AIR COMPRESSOR
S/N 6NC1-33951; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 266-9815 ENGINE AR
i00671979 SEBP2488
1355094 LINES GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5810 I [1] HOSE AS  
2. 2N-3378 [3] ELBOW-FLARED  
3. 4P-5970 I [1] HOSE AS  
4. 146-7639 [1] HOSE AS  
5. 2N-1287 [1] ELBOW-FLARED  
6. 9N-3040 I [1] HOSE AS  
7. 6K-1972 [1] ELBOW-FLARED  
8. 3B-7764 [1] BUSHING (REDUCING)  
9. 8T-6757 [5] PLUG-PIPE  
10. 9M-4584 [1] CONNECTOR  
11. 2M-9780 [1] SEAL-O-RING  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
13. 9M-6522 [1] CONNECTOR (1/2-14 NPTF)  
14. 8M-0755 [1] ADAPTER  
15. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
16. 6I-1240 [1] GOVERNOR AS-AIR COMPRESSOR  
  2S-2923 [1] COVER AS  
  9M-0402 [1] KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)  
    (INCLUDES GROMMETS, FILTERS, SPRINGS, VALVE, COVER, RING & GASKET)
17. 6L-1883 [2] GASKET  
18. 4B-3388 [2] BOLT (5/16-18X1.125-IN)  
19. 136-3166 [1] ADAPTER  
20. 3P-1823 B [1] ADAPTER-PIPE  
21. 5F-5434 [1] VALVE AS-VENT  
22. 030-7972 [1] ELBOW  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24880047
 

7C-2096: MOUNTING GP-ENGINE & XMSN

7C-2096 MOUNTING GP-ENGINE & XMSN
S/N 5HM1-UP
PART OF 123-4192, 126-5235, 256-1274 INSTALLATION AR-ENGINE
i00125283 SEBP2488
7C2096 MOUNTING GP-ENGINE & XMSN Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-9920 [2] MOUNTING AS-VIBRATION ISOLATOR  
2. 9W-6582 [2] SLEEVE  
3. 9W-6584 [4] WASHER (20.5X114X10-MM THK)  
4. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 7X-0375 [2] BOLT (3/4-10X5-IN)  
6. 9W-7385 [2] SLEEVE  
7. 6Y-9960 [2] MOUNT AS  
    (EACH INCLUDES)
  9W-8095 [1] PAD-REBOUND  
8. 9W-7388 [4] WASHER (26X144X12-MM THK)  
9. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
10. 8T-6430 M [8] BOLT (M20X2.5X50-MM)  
11. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
12. 1J-5929 [2] BOLT (1-8X6-IN)  
13. 211-9274 [1] SUPPORT (RH)  
14. 211-9275 [1] SUPPORT (LH)  
15. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
16. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
 

#SEBP24880048
 

2P-9647: PAN GP-OIL

2P-9647 PAN GP-OIL
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR
i00125148 SEBP2488
2P9647 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-2969 [1] GASKET-PAN PLATE  
2. 8S-1965 [1] GASKET-OIL PAN  
3. 2Y-9326 [1] PAN-OIL  
4. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
5. 8N-6854 [1] GASKET  
6. 113-5336 [1] ADAPTER AS-DRAIN  
7. 5N-8780 [1] PLUG-DRAIN (ENGINE OIL PAN)  
8. 2P-1738 [1] PLATE AS-OIL PAN  
  1S-5304 [1] LUG  
  6J-2237 [7] BOSS-WELD  
 

#SEBP24880049
 

1W-6588: PISTON & ROD GP

1W-6588 PISTON & ROD GP
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR
i00125130 SEBP2488
1W6588 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-6560 [1] BODY AS-PISTON (REQUIRES 4MM THICK OIL RING)  
2. 9S-3029 [1] RING-PISTON (TOP)  
3. 5S-6750 [1] RING-PISTON (INTERMEDIATE)  
4. 6I-0497 [1] RING-PISTON (OIL)(4MM THICK)  
5. 1S-9543 [2] RETAINER-PIN  
6. 7N-9805 [1] PIN-PISTON  
7. 8N-1721 [1] ROD AS-CONNECTING  
  8N-1849 [1] BEARING-CONNECTING ROD  
  1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT (1/2-20-THD)  
8. 328-5572 [1] BEARING-CONNECTING ROD (STANDARD)  
  8N-8221 AB BEARING-CONNECTING ROD (0.254-MM US)  
  8N-8222 AB BEARING-CONNECTING ROD (0.508-MM US)  
  8N-8223 AB BEARING-CONNECTING ROD (0.762-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Specification for Reusability of the Intake Valves and Exhaust Valves {1105}
2002/05/13
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11

Caterpillar Parts SIS Catalog 140H :

398-9357 KIT-CYLINDER HEAD
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
7E-5681 HOUSING GP-FLYWHEEL
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
GEAR GP-FRONT
111-8001 GEAR GP-FRONT
FLYWHEEL GP
7E-5680 FLYWHEEL GP
FASTENER GP-OIL PAN
2P-6200 FASTENER GP-OIL PAN
FASTENER GP-OIL PAN
170-2496 FASTENER GP-OIL PAN
392-0637 KIT-CYLINDER HEAD GASKET
447-8653 KIT-CYLINDER HEAD GASKET
460-8225 KIT-FRONT COVER GASKET
LIFTING GP-ENGINE
7N-9122 LIFTING GP-ENGINE
LINES GP-AIR COMPRESSOR
128-0065 LINES GP-AIR COMPRESSOR
LINES GP-AIR COMPRESSOR
135-5094 LINES GP-AIR COMPRESSOR
MOUNTING GP-ENGINE & XMSN
7C-2096 MOUNTING GP-ENGINE & XMSN
PAN GP-OIL
2P-9647 PAN GP-OIL

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.