AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

214-1983 TANK & MTG GP-HYDRAULIC S/N 5HM2103-UP PART OF 112-4113 CHASSIS AR 140H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
SHAFT GP
VALVE & LINKAGE GP

MOTOR GRADER 140H MOTOR GRADER 5HM
 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2488 140H 5HM   (1996)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
 

#SEBP24880490
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N 5HM2103-UP
PART OF 112-4113 CHASSIS AR
i01707184 SEBP2488
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880491
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 5HM1-2102
PART OF 112-4113 CHASSIS AR
i00125501 SEBP2488
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
20. 1R-0722 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880492
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 5HM724-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00491052 SEBP2488
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
3. 027-1287 [1] FITTING-GREASE (PUMP DRIVE)  
4. 9K-2721 [2] LOCKWASHER  
5. 6G-6623 [1] SEAL  
6. 5H-3593 [1] RETAINER-FELT  
7. 6G-4358 [1] YOKE  
8. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP24880493
 

5Y-0769: UNIVERSAL JOINT GP-PUMP DRIVE

5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 5HM1-723
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00125215 SEBP2488
5Y0769 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-0766 [1] YOKE AS-SLIP  
2. 2Y-5755 [3] FITTING  
3. 5Y-0768 [1] YOKE  
4. 5Y-0767 [2] BEARING  
 

#SEBP24880494
 

112-6795: VALVE & LINKAGE GP

112-6795 VALVE & LINKAGE GP -4-BANK, RH; 2-BANK, LH
S/N 5HM1-UP
PART OF 112-4106 BLADE AR
i00125804 SEBP2488
1126795 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8672 Y [1] VALVE GP-BANK 2 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
  7H-3641 [12] END-ROD (5/16-24-THD)  
  8X-4276 [6] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [12] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [12] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
39. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
40. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880495
 

112-6799: VALVE & LINKAGE GP

112-6799 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125805 SEBP2488
1126799 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8673 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [14] NUT-FULL (5/16-24-THD)  
  7H-3641 [14] END-ROD (5/16-24-THD)  
  8X-4276 [7] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT  
24. 2G-6756 [1] KNOB-WHEEL LEAN (RH)  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8D-5633 [1] LEVER (SIDE SHIFT)  
41. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
42. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880496
 

112-6804: VALVE & LINKAGE GP

112-6804 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125806 SEBP2488
1126804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 112-2580 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [14] NUT-FULL (5/16-24-THD)  
  7H-3641 [14] END-ROD (5/16-24-THD)  
  8X-4276 [7] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [7] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 2G-6753 [1] KNOB-SCARIFIER  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 101-2457 [1] LEVER (SCARIFER)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880497
 

112-6818: VALVE & LINKAGE GP

112-6818 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5HM1-UP
PART OF 112-6871 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125807 SEBP2488
1126818 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 112-2581 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (LH BLADE LIFT)  
6. 8X-4276 [7] ROD  
7. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [2] END-ROD (5/16-24-THD)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [7] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
30. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 2G-6740 [1] KNOB-RIPPER  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8D-5633 [1] LEVER (WHEEL LEAN)  
41. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
42. 101-2457 [1] LEVER (ARTICULATION)  
43. 8D-5634 [1] LEVER (CENTER SHIFT)  
44. 8D-5632 [1] LEVER (RH BLADE LIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880498
 

115-0804: VALVE & LINKAGE GP

115-0804 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125872 SEBP2488
1150804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6753 [1] KNOB-SCARIFIER  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 101-2457 [1] LEVER (SCARIFIER)  
43. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
44. 8D-5633 [1] LEVER (SIDE SHIFT)  
45. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880499
 

115-0808: VALVE & LINKAGE GP

115-0808 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 5HM1-UP
RIPPER
PART OF 115-1002 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125873 SEBP2488
1150808 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 101-2457 [1] LEVER (RIPPER)  
45. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 140H :

TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWASHPLATE GP
100-3416 SWASHPLATE GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6799 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6818 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.