AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

115-0810 VALVE & LINKAGE GP -5-BANK, RH, LH S/N 5HM1-UP AN ATTACHMENT 140H MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 140H MOTOR GRADER 5HM
 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2488 140H 5HM   (1996)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0810 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0812 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-0464 VALVE & LINKAGE GP
 

#SEBP24880500
 

115-0810: VALVE & LINKAGE GP

115-0810 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125874 SEBP2488
1150810 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [1] LEVER (ARTICULATION)  
3. 8D-5634 [1] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
  8X-4276 [10] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (PLOW & BULLDOZER LIFT)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6753 [1] KNOB-SCARIFIER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 124-3326 Y [1] VALVE GP-BANK 5 (RH)  
44. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
45. 101-2457 [1] LEVER (SCARIFIER)  
46. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
47. 8D-5633 [1] LEVER (SIDE SHIFT)  
48. 101-2458 [1] LEVER (BLADE TIP)  
49. 8D-5632 [1] LEVER (CENTER SHIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880501
 

115-0811: VALVE & LINKAGE GP

115-0811 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125875 SEBP2488
1150811 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)(LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5633 [1] LEVER (SIDE SHIFT)  
43. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880502
 

115-0812: VALVE & LINKAGE GP

115-0812 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 5HM1-UP
PART OF 115-1011 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125876 SEBP2488
1150812 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [1] LEVER (ARTICULATION)  
3. 8D-5634 [1] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
  8X-4276 [10] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (PLOW & BULLDOZER LIFT)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 124-3326 Y [1] VALVE GP-BANK 5 (RH)  
44. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
45. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
46. 101-2458 [1] LEVER (BLADE TIP)  
47. 8D-5633 [1] LEVER (SIDE SHIFT)  
48. 101-2457 [1] LEVER (RIPPER)  
49. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880503
 

130-0464: VALVE & LINKAGE GP

130-0464 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N 5HM1-UP
AN ATTACHMENT
i00126218 SEBP2488
1300464 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 130-7754 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 101-2457 [1] LEVER (SCARIFER)  
42. 8D-5634 [1] LEVER (BLADE LIFT)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880504
 

130-7603: VALVE & LINKAGE GP

130-7603 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N 5HM1-UP
PART OF 130-0463 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126242 SEBP2488
1307603 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 130-7755 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 2G-6740 [1] KNOB-RIPPER  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 101-2457 [1] LEVER (RIPPER)  
42. 8D-5634 [1] LEVER (BLADE LIFT)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880505
 

104-8672: VALVE GP-BANK 2

104-8672 VALVE GP-BANK 2 -LH
S/N 5HM1-UP
PART OF 112-6795 VALVE & LINKAGE GP
i00125639 SEBP2488
1048672 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 111-9321 [2] SPACER  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 101-9346 [1] COVER  
9. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880506
 

104-8673: VALVE GP-BANK 3

104-8673 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6799 VALVE & LINKAGE GP
AN ATTACHMENT
i00125640 SEBP2488
1048673 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 111-9321 [1] SPACER  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880507
 

112-2580: VALVE GP-BANK 3

112-2580 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6804 VALVE & LINKAGE GP
AN ATTACHMENT
i00488412 SEBP2488
1122580 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0543 Y [1] VALVE GP-CONTROL (SCARIFIER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880508
 

112-2581: VALVE GP-BANK 3

112-2581 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6818 VALVE & LINKAGE GP
AN ATTACHMENT
i00488423 SEBP2488
1122581 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24880509
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N 5HM1-UP
PART OF 112-6795, 112-6799, 112-6804, 112-6818, 115-0804, 115-0808, 115-0811, 130-0464, 130-7603 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00126115 SEBP2488
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140H :

VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6818 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6799 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0812 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-0464 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-7603 VALVE & LINKAGE GP
VALVE GP-BANK 2
104-8672 VALVE GP-BANK 2
VALVE GP-BANK 3
104-8673 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2580 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2581 VALVE GP-BANK 3

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.