OPERATOR STATION
CONTROL GPCONTROL GP-STEERING
DOOR GP
OPERATOR STATION
CONTROL GP
#SEBP24880590
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
S/N 5HM1272-1551
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
S/N 5HM1272-1551
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 8X-2498 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 145-9077 | [1] | ROD | |
| 18. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 C | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 C | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 C | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 C | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 C | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 C | [1] | SEAL-O-RING | |
| 31. | 9X-6578 C | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 C | [1] | BRACKET | |
| 40. | 149-2065 C | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 C | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24880591
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
S/N 5HM1552-2119
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
S/N 5HM1552-2119
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 207-4922 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 169-0922 C | [1] | ROD | |
| 18. | 4J-8922 C | [1] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 C | [1] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 | [1] | SEAL-O-RING | |
| 31. | 9X-6578 | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 | [1] | BRACKET | |
| 40. | 149-2065 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| 46. | 169-0921 C | [1] | ROD END (3/8-24 LH-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24880592
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
S/N 5HM2120-UP
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
S/N 5HM2120-UP
INCHING PEDAL
PART OF 112-4113 CHASSIS AR
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 207-4922 C | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 169-0922 | [1] | ROD | |
| 18. | 4J-8922 | [1] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 | [1] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 | [1] | CABLE AS | |
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 | [1] | SEAL-O-RING | |
| 31. | 9X-6578 | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 | [1] | BRACKET | |
| 40. | 149-2065 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| 46. | 169-0921 | [1] | ROD END (3/8-24 LH-THD) | |
| 47. | 1V-6341 | [1] | SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24880593
7I-4718: CONTROL GP-STEERING
For full view, you need register
#SEBP24880594
7I-4718: CONTROL GP-STEERING
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-3769 CJ | [1] | PUMP GP-METERING (HMU) | |
| 2. | 092-3200 | [1] | STEERING WHEEL | |
| 3. | 144-6695 | [1] | NUT (13/16-20-THD) | |
| 4. | 118-9573 M | [4] | BOLT-12 POINT HEAD (M10X1.5X35-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 257-8471 J | [1] | KIT-SEAL (HMU) | ||
| (INCLUDES SEALS & INSTALLATION TOOL) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP24880595
266-7031: DOOR GP-CAB
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-3915 B | [4] | SHIM (1.52-MM THK) | |
| 2. | 5T-7486 | [1] | RETAINER-SPRING | |
| 3. | 6D-6581 | [14] | RIVET-POP | |
| 4. | 6V-2773 | [2] | PLUG | |
| 5. | 6V-7636 | [4] | PIN AS-SPRING | |
| 6. | 8X-4066 | [1] | HINGE | |
| 8. | 8X-4262 | [1] | COVER (RH) | |
| 11. | 8Y-4398 | [1] | LINK-CONNECTING | |
| 12. | 8Y-4620 | [1] | LINK-CONNECTING | |
| 13. | 8Y-4801 | [1] | LOCK AS-CYLINDER | |
| 226-0295 | [1] | LOCK AS | ||
| 226-0342 | [1] | CAM | ||
| 14. | 8Y-6385 | [1] | SHIELD-STRIKER | |
| 15. | 9X-2546 M | [4] | BOLT (M6X1X20-MM) | |
| 16. | 106-6553 | [2] | BUMPER-CONICAL | |
| 17. | 107-9641 | [1] | PLATE AS | |
| 18. | 108-5950 | [1] | LATCH AS | |
| 19. | 108-5952 | [1] | LINK (RH) | |
| 20. | 114-9190 | [1] | SEAL | |
| 21. | 117-1963 | [1] | PLATE AS | |
| 22. | 128-0037 | [1] | KNOB-BALL | |
| 23. | 199-2677 | [1] | LINK (RELEASE) | |
| 24. | 199-2712 | [1] | HANDLE | |
| 25. | 282-8470 | [1] | DOOR AS-ACCESS (RH) | |
| 6V-9632 M | [10] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 282-9436 | [1] | SPACER | |
| 27. | 282-9437 | [1] | PLATE | |
| 28. | 8Y-4400 | [1] | LATCH AS-DOOR | |
| 29. | 296-4298 | [1] | HANDLE AS-DOOR (OUTSIDE) | |
| 30. | 296-4303 | [1] | HANDLE AS-DOOR (INSIDE) | |
| 31. | 1H-3338 | [1] | LOCKWASHER | |
| 32. | 230-8993 M | [2] | SCREW-FLAT HEAD (M6X1X12-MM) | |
| 33. | 321-5918 | [1] | PLUG-BUTTON | |
| 34. | 8C-8454 M | [14] | SCREW-MACHINE (M6X1X20-MM) | |
| 35. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 36. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 37. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4157 | [1] | STRIKER AS | |
| 8T-4158 | [1] | WASHER-SPECIAL | ||
| 39. | 8T-4181 M | [6] | BOLT (M6X1X20-MM) | |
| 40. | 8X-4245 M | [1] | BOSS (M6X1X18-MM) | |
| 41. | 9X-2042 M | [7] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 42. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 43. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 44. | 5P-5969 D | SEAL (1.5-M) | ||
| 45. | 5P-5768 D | SEAL (2.4-M) | ||
| 45A. | 5P-5768 D | SEAL (2.8-M) | ||
| 46. | 122-2228 E | SEAL (172-CM) | ||
| 47. | 178-8894 E | SEAL (340-CM) | ||
| 48. | 308-2025 | [1] | COVER (RH) | |
| 49. | 308-7592 | [1] | GLASS | |
| 50. | 308-7593 | [1] | GLASS | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP24880596
266-7031: DOOR GP-CAB
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-3915 B | [4] | SHIM (1.52-MM THK) | |
| 2. | 5T-7486 | [1] | RETAINER-SPRING | |
| 4. | 6V-2773 C | [2] | PLUG | |
| 5. | 6V-7636 | [4] | PIN AS-SPRING | |
| 8. | 487-5655 | [1] | COVER (RH) | |
| 11. | 8Y-4398 | [1] | LINK-CONNECTING | |
| 12. | 8Y-4620 | [1] | LINK-CONNECTING | |
| 13. | 8Y-4801 | [1] | LOCK AS-CYLINDER | |
| 226-0295 J | [1] | LOCK AS | ||
| 226-0342 | [1] | CAM | ||
| 14. | 8Y-6385 | [1] | SHIELD-STRIKER | |
| 15. | 9X-2546 M | [4] | BOLT (M6X1X20-MM) | |
| 16. | 106-6553 | [2] | BUMPER-CONICAL | |
| 17. | 107-9641 | [1] | PLATE AS | |
| 18. | 108-5950 | [1] | LATCH AS | |
| 19. | 108-5952 | [1] | LINK (RH) | |
| 20. | 114-9190 | [1] | SEAL | |
| 21. | 117-1963 | [1] | PLATE AS | |
| 22. | 128-0037 | [1] | KNOB-BALL | |
| 23. | 199-2677 | [1] | LINK (RELEASE) | |
| 24. | 199-2712 | [1] | HANDLE | |
| 25. | 487-6629 | [1] | DOOR AS-CAB | |
| 6D-6581 | [14] | RIVET-POP | ||
| 8X-4066 | [1] | HINGE | ||
| 27. | 282-9437 | [1] | PLATE | |
| 28. | 8Y-4400 | [1] | LATCH AS-DOOR | |
| 29. | 296-4298 | [1] | HANDLE AS-DOOR (OUTSIDE) | |
| 3V-4694 | [2] | PLUG-BUTTON | ||
| 30. | 296-4303 | [1] | HANDLE AS-DOOR (INSIDE) | |
| 31. | 1H-3338 | [1] | LOCKWASHER | |
| 32. | 230-8993 M | [2] | SCREW-FLAT HEAD (M6X1X12-MM) | |
| 33. | 321-5918 C | [1] | PLUG-BUTTON | |
| 34. | 8C-8454 M | [14] | SCREW-MACHINE (M6X1X20-MM) | |
| 35. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 36. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 37. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4157 | [1] | STRIKER AS | |
| 8T-4158 | [1] | WASHER-SPECIAL | ||
| 39. | 8T-4181 M | [6] | BOLT (M6X1X20-MM) | |
| 40. | 8X-4245 M | [1] | BOSS (M6X1X18-MM) | |
| 41. | 9X-2042 M | [7] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 42. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 43. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 44. | 5P-5969 CD | SEAL (3-M) | ||
| 45. | 5P-5768 CD | SEAL (2.5-M) | ||
| 45A. | 5P-5768 CD | SEAL (2.8-M) | ||
| 46. | 122-2228 E | SEAL (148-CM) | ||
| 47. | 178-8894 E | SEAL (305-CM) | ||
| 48. | 308-2025 | [1] | COVER (RH) | |
| 49. | 308-7592 | [1] | GLASS (LOWER) | |
| 50. | 308-7593 | [1] | GLASS (UPPER) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP24880597
8X-4317: DOOR GP-CAB
8X-4317 DOOR GP-CAB -HIGH PROFILE-RH
S/N 5HM1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
S/N 5HM1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-2677 | [1] | LINK (RELEASE) | |
| 2. | 1H-3338 | [1] | LOCKWASHER | |
| 3. | 5T-7486 | [1] | RETAINER-SPRING | |
| 4. | 6D-6581 | [16] | RIVET-POP | |
| 5. | 6V-2773 | [2] | PLUG | |
| 6. | 6V-7636 | [4] | PIN AS-SPRING | |
| 7. | 8X-3806 | [1] | HINGE | |
| 8. | 8X-4243 | [1] | COVER (RH) | |
| 9. | 8X-4262 | [1] | COVER (RH) | |
| 10. | 8X-3938 | [1] | GLASS (UPPER) | |
| 11. | 8X-4448 | [1] | GLASS (LOWER) | |
| 12. | 8Y-4398 | [1] | LINK-CONNECTING | |
| 13. | 8Y-4400 | [1] | LATCH AS-DOOR | |
| 14. | 8Y-4401 | [1] | HANDLE AS (INSIDE) | |
| 15. | 8Y-4619 | [1] | HANDLE AS (OUTSIDE) | |
| 16. | 8Y-4620 | [1] | LINK-CONNECTING | |
| 17. | 8Y-4801 J | [1] | LOCK AS-CYLINDER | |
| 226-0295 | [1] | LOCK AS | ||
| 226-0342 | [1] | CAM | ||
| 18. | 9X-2546 M | [4] | BOLT (M6X1X20-MM) | |
| 19. | 107-9641 | [1] | PLATE AS | |
| 20. | 108-5950 | [1] | LATCH AS | |
| 21. | 108-5952 | [1] | LINK (RH) | |
| 22. | 114-9190 | [1] | SEAL | |
| 23. | 128-0037 | [1] | KNOB-BALL | |
| 24. | 199-2712 | [1] | HANDLE | |
| 25. | 199-2739 | [1] | DOOR AS (RH)(HIGH PROFILE) | |
| 6V-9632 M | [8] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4181 M | [6] | BOLT (M6X1X20-MM) | |
| 29. | 8X-4245 M | [1] | BOSS (M6X1X18-MM) | |
| 30. | 9X-2042 M | [7] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 31. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 32. | 5P-5768 D | SEAL (2.9-M) | ||
| 32A. | 5P-5768 D | SEAL (2.7-M) | ||
| 33. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| D | ORDER BY THE METER | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP24880598
8X-4318: DOOR GP-CAB
8X-4318 DOOR GP-CAB -HIGH PROFILE-LH
S/N 5HM1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
S/N 5HM1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-2677 | [1] | LINK (RELEASE) | |
| 2. | 1H-3338 | [1] | LOCKWASHER | |
| 3. | 5T-7486 | [1] | RETAINER-SPRING | |
| 4. | 6D-6581 | [16] | RIVET-POP | |
| 5. | 6V-2773 | [2] | PLUG | |
| 6. | 6V-7636 | [4] | PIN AS-SPRING | |
| 7. | 8X-3806 | [1] | HINGE | |
| 8. | 8X-4244 | [1] | COVER (LH) | |
| 9. | 8X-4263 | [1] | COVER (LH) | |
| 10. | 8X-3938 | [1] | GLASS (UPPER) | |
| 11. | 8X-4448 | [1] | GLASS (LOWER) | |
| 12. | 8Y-4398 | [1] | LINK-CONNECTING | |
| 13. | 8Y-4399 | [1] | LATCH AS-DOOR | |
| 14. | 8Y-4401 | [1] | HANDLE AS (INSIDE) | |
| 15. | 8Y-4619 | [1] | HANDLE AS (OUTSIDE) | |
| 16. | 8Y-4620 | [1] | LINK-CONNECTING | |
| 17. | 8Y-4801 J | [1] | LOCK AS-CYLINDER | |
| 226-0295 | [1] | LOCK AS | ||
| 226-0342 | [1] | CAM | ||
| 18. | 9X-2546 M | [4] | BOLT (M6X1X20-MM) | |
| 19. | 107-9641 | [1] | PLATE AS | |
| 20. | 108-5949 | [1] | LATCH AS (LH) | |
| 21. | 108-5951 | [1] | LINK (LH) | |
| 22. | 114-9190 | [1] | SEAL | |
| 23. | 128-0037 | [1] | KNOB-BALL | |
| 24. | 199-2712 | [1] | HANDLE | |
| 25. | 199-2740 | [1] | DOOR AS (LH)(HIGH PROFILE) | |
| 26. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4181 M | [6] | BOLT (M6X1X20-MM) | |
| 29. | 8X-4245 M | [1] | BOSS (M6X1X18-MM) | |
| 30. | 9X-2042 M | [7] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 31. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 5P-5768 B | SEAL (5.6-M) | ||
| B | USE AS REQUIRED | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP24880599
8X-4413: DOOR GP-CAB
8X-4413 DOOR GP-CAB -HIGH PROFILE
S/N 5HM1-UP
PART OF 130-4564 CAB GP, 116-5842 ROPS GP
AN ATTACHMENT
S/N 5HM1-UP
PART OF 130-4564 CAB GP, 116-5842 ROPS GP
AN ATTACHMENT
For full view, you need register
Parts for your 140H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5158 | [2] | STRIKER AS-BODY | |
| 2. | 8X-4317 Y | [1] | DOOR GP-CAB (HIGH PROFILE, RH) | |
| 3. | 8X-4318 Y | [1] | DOOR GP-CAB (HIGH PROFILE, LH) | |
| 4. | 106-6553 | [4] | BUMPER-CONICAL | |
| 5. | 107-6813 | [2] | PLATE AS | |
| 6. | 124-8843 | [2] | PLATE AS | |
| 7. | 126-4966 | [2] | PLATE | |
| 8. | 129-3178 M | [32] | LOCKNUT (M6X1-THD) | |
| 9. | 138-4054 M | [5] | SCREW-FLAT HEAD (M6X1X45-MM) | |
| 10. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 11. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 12. | 7X-0605 B | [8] | WASHER-HARD (13X28X1.6-MM THK) | |
| 13. | 8C-8454 M | [27] | SCREW-MACHINE (M6X1X20-MM) | |
| 14. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 18. | 9X-8256 | [32] | WASHER (6.6X12X2-MM THK) | |
| 19. | 5P-5969 D | SEAL (1.6-M EACH) | ||
| 20. | 122-2228 E | SEAL (172-CM EACH) | ||
| 21. | 178-8894 E | SEAL (335-CM EACH) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
