AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-5340 TURBOCHARGER GP S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999 PART OF 111-8005, 119-0278, 146-4339 ENGINE AR ALSO AN ATTACHMENT 160H NA


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL

MOTOR GRADER 160H NA MOTOR GRADER 3GM
 160H Motor Grader 3GM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2489 160H NA 3GM   (1996)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
147-2070 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
147-2071 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
7E-5683 LINES GP-TURBOCHARGER OIL
392-3636 KIT-TURBOCHARGER GASKET
393-1181 KIT-TURBOCHARGER GASKET
TURBOCHARGER GP
106-7407 TURBOCHARGER GP
TURBOCHARGER GP
111-8035 TURBOCHARGER GP
TURBOCHARGER GP
113-5340 TURBOCHARGER GP
TURBOCHARGER GP
113-7919 TURBOCHARGER GP
 

#SEBP24890120
 

113-5340: TURBOCHARGER GP

113-5340 TURBOCHARGER GP
S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999
PART OF 111-8005, 119-0278, 146-4339 ENGINE AR
ALSO AN ATTACHMENT
i00125831 SEBP2489
1135340 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-7919 Y [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 1P-0451 [1] GASKET  
4. 9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
5. 7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
  5P-3931 BA COMPOUND-ANTI-SEIZE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24890121
 

113-7919: TURBOCHARGER GP

113-7919 TURBOCHARGER GP
S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999
PART OF 113-5340 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00125850 SEBP2489
1137919 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8315 [1] CARTRIDGE GP-TURBOCHARGER  
2. 113-8317 [1] COVER-COMPRESSOR  
3. 113-8316 [1] HOUSING  
4. 7C-9532 [1] CLAMP AS (TURBINE)  
5. 7C-9538 [1] CLAMP AS-COMPRESSOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24890122
 

112-1781: CONTROL AR-GOVERNOR

112-1781 CONTROL AR-GOVERNOR
S/N 3GM1-201
PART OF 152-3838, 152-3843 SNOW AR-MOTOR GRADER
AN ATTACHMENT
i00600923 SEBP2489
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  119-0279 Y [1] ENGINE AR  
    S/N 3GM1-49
  110-1609 Y [1] ENGINE AR  
    S/N 3GM50-79
  146-4344 Y [1] ENGINE AR  
    S/N 3GM80-201
  115-7540 Y [1] LINES GP-AIR COMPRESSOR  
    S/N 3GM1-49
  7E-5679 Y [1] RADIATOR GP  
  112-1106 Y [1] WIRING GP-SHUTOFF  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24890123
 

112-7491: CONTROL AR-GOVERNOR

112-7491 CONTROL AR-GOVERNOR
S/N 3GM1-UP
AN ATTACHMENT
i00125812 SEBP2489
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  119-0278 Y [1] ENGINE AR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24890124
 

111-5162: CONTROL GP-FUEL RATIO

111-5162 CONTROL GP-FUEL RATIO
S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999
PART OF 113-5342, 128-8807 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00125729 SEBP2489
1115162 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9315 [2] WASHER-SPRING  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3E-6760 [1] SEAL-O-RING  
6. 4P-7274 [1] COVER  
7. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
8. 4W-0924 [1] RETAINER  
9. 5P-8210 [1] SEAL-O-RING  
10. 7W-2826 [1] SPRING  
11. 4P-7275 [1] COVER  
12. 106-6493 [1] WASHER  
13. 6I-1564 [1] DIAPHRAGM  
14. 9N-1754 [1] SPRING  
15. 7W-2828 [1] SPRING  
16. 7W-2015 [1] EXTENSION-VALVE  
17. 7N-9035 [1] RETAINER  
18. 7N-9062 [1] HOUSING  
19. 8N-5763 [1] SEAL  
20. 8N-5764 [1] PISTON  
21. 8F-4610 [1] RING-RETAINING  
22. 2W-9316 [1] VALVE AS  
23. 9Y-8088 [1] VALVE  
24. 8N-5765 [1] SPRING  
25. 111-5163 [1] TAG-IDENTIFICATION  
26. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

#SEBP24890125
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 3GM1-91
PART OF 8W-6228 CHASSIS AR
i00125395 SEBP2489
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
2. 7K-2135 [2] BEARING-ROLLER  
3. 9G-9154 [1] CLIP  
4. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 8X-7740 [1] CLIP  
7. 8W-8909 [3] SLEEVE  
8. 4D-4064 [1] ROD END (3/8-24-THD)  
9. 6V-8801 [4] NUT (3/8-16-THD)  
10. 5B-1866 [1] PLUG-CUP  
11. 4L-6454 [1] BOLT (3/8-16X1-IN)  
12. 8C-9586 [1] CABLE AS  
13. 4M-6425 [2] BOLT (5/16-18X1-IN)  
14. 8X-2496 [1] HOUSING  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
16. 3D-9609 [1] ROD END  
17. 164-3562 [1] CONTROL  
  9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
18. 112-9164 [3] BOOT  
19. 4J-8922 [1] ROD END (3/8-24-THD)  
20. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [1] PIN  
22. 7V-0446 [1] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
33. 7H-3641 [4] END-ROD (5/16-24-THD)  
34. 2N-9421 [2] SPRING-DISC  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [2] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
39. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 8X-3122 [1] LINK AS  
  6D-0458 [2] RETAINER  
44. 2B-8343 [1] SPRING  
45. 4F-9503 [1] SPRING (LONG)  
46. 2S-1382 [1] SPRING (SHORT)  
47. 8D-9973 [1] HOUSING  
48. 7K-2135 [2] BEARING-ROLLER  
49. 9D-0145 [1] LEVER  
50. 8X-3123 [1] SHAFT  
51. 1B-8704 [4] KEY-WOODRUFF  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
53. 4D-4895 [2] LEVER  
54. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
55. 6V-8801 [4] NUT (3/8-16-THD)  
56. 8X-3593 [1] BRACKET AS  
57. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
58. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
59. 8X-3124 [1] SHAFT  
60. 8X-3261 [1] LEVER  
61. 8X-2500 [1] PEDAL-GOVERNOR CONTROL  
62. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
63. 145-9077 [1] ROD  
64. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
65. 4J-8922 [2] ROD END (3/8-24-THD)  
66. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
67. 1B-0676 [2] PIN  
68. 7V-0446 [2] CLIP  
69. 6V-8185 [2] NUT (1/4-20-THD)  
70. 6V-8187 [2] NUT (1/4-28-THD)  
71. 1V-6341 [2] SEAL (30.15MM OD)  
72. 4L-6454 [6] BOLT (3/8-16X1-IN)  
73. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
74. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
75. 8X-2954 [1] COVER  
  8X-2952 [1] GASKET  
76. 5P-7704 [1] ROD END  
77. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
78. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
79. 7H-3641 [1] END-ROD (5/16-24-THD)  
80. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
81. 6L-7751 [1] ROD END  
82. 6V-8189 [2] NUT (5/16-18-THD)  
83. 8X-8299 [1] LEVER  
84. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
85. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
86. 2V-7859 [1] BEARING  
87. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
88. 8X-3121 [1] ROD  
89. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
90. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
91. 8X-2956 [1] LEVER AS  
92. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
93. 8X-2953 [1] PLATE  
94. 8T-2604 [1] SEAL-LIP TYPE  
95. 8T-8908 [1] BOLT (1/4-20X1-IN)  
96. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
97. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
98. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
 

#SEBP24890126
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 3GM92-UP
PART OF 8W-6228 CHASSIS AR
i01361841 SEBP2489
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
2. 7K-2135 [2] BEARING-ROLLER  
3. 9G-9154 [1] CLIP  
4. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 033-8248 [1] CLIP (LOOP)  
7. 8W-8909 [2] SLEEVE  
8. 4D-4064 [1] ROD END (3/8-24-THD)  
9. 6V-8801 [5] NUT (3/8-16-THD)  
10. 5B-1866 [1] PLUG-CUP  
11. 4L-6454 [1] BOLT (3/8-16X1-IN)  
12. 8C-9586 [1] CABLE AS  
13. 4M-6425 [2] BOLT (5/16-18X1-IN)  
14. 8X-2496 [1] HOUSING  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
16. 3D-9609 [1] ROD END  
17. 164-3562 [1] CONTROL  
  9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
18. 112-9164 [3] BOOT  
19. 4J-8922 C [2] ROD END (3/8-24-THD)  
20. 3S-2713 C [3] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [1] PIN  
22. 7V-0446 [1] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
33. 7H-3641 [4] END-ROD (5/16-24-THD)  
34. 2N-9421 [2] SPRING-DISC  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [2] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
39. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 8X-3122 [1] LINK AS  
  6D-0458 [2] RETAINER  
44. 2B-8343 [1] SPRING  
45. 4F-9503 [1] SPRING (LONG)  
46. 2S-1382 [1] SPRING (SHORT)  
47. 8D-9973 [1] HOUSING  
48. 7K-2135 [2] BEARING-ROLLER  
49. 9D-0145 [1] LEVER  
50. 8X-3123 [1] SHAFT  
51. 1B-8704 [4] KEY-WOODRUFF  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
53. 4D-4895 [2] LEVER  
54. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
55. 6V-8801 [4] NUT (3/8-16-THD)  
56. 8X-3593 [1] BRACKET AS  
57. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
58. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
59. 8X-3124 [1] SHAFT  
60. 8X-3261 [1] LEVER  
61. 8X-2500 [1] PEDAL-GOVERNOR CONTROL  
62. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
63. 169-0922 [1] ROD  
64. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
65. 4J-8922 [1] ROD END (3/8-24-THD)  
66. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
67. 1B-0676 [2] PIN  
68. 7V-0446 [2] CLIP  
69. 6V-8185 [2] NUT (1/4-20-THD)  
70. 6V-8187 [2] NUT (1/4-28-THD)  
71. 1V-6341 [2] SEAL (30.15MM OD)  
72. 4L-6454 [6] BOLT (3/8-16X1-IN)  
73. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
74. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
75. 8X-2954 [1] COVER  
  8X-2952 [1] GASKET  
76. 5P-7704 [1] ROD END  
77. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
78. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
79. 7H-3641 [1] END-ROD (5/16-24-THD)  
80. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
81. 6L-7751 [1] ROD END  
82. 6V-8189 [2] NUT (5/16-18-THD)  
83. 8X-8299 [1] LEVER  
84. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
85. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
86. 2V-7859 [1] BEARING  
87. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
88. 8X-3121 [1] ROD  
89. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
90. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
91. 8X-2956 [1] LEVER AS  
92. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
93. 8X-2953 [1] PLATE  
94. 8T-2604 [1] SEAL-LIP TYPE  
95. 8T-8908 [1] BOLT (1/4-20X1-IN)  
96. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
97. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
98. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
99. 169-0921 [1] ROD END (3/8-24 LH-THD)  
100. 2P-8886 C [1] LEG  
101. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24890127
 

1W-2481: COVER GP-TACHOMETER DRIVE

1W-2481 COVER GP-TACHOMETER DRIVE
S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999
PART OF 110-1609, 111-8005, 119-0278, 119-0279, 146-4339, 146-4344 ENGINE AR
ALSO AN ATTACHMENT
i00125125 SEBP2489
1W2481 COVER GP-TACHOMETER DRIVE Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7629 [1] COVER  
2. 4M-8303 [1] SEAL-O-RING  
3. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
4. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP24890128
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 6NC1-UP; 8TD10000-99999; 08Z96239-99999
PART OF 113-5342, 128-8807 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00125304 SEBP2489
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24890129
 

6I-1370: FILTER GP-PRIMARY FUEL

6I-1370 FILTER GP-PRIMARY FUEL
S/N 3GM1-UP
PART OF 8W-6265 LINES GP-FUEL
i00125245 SEBP2489
6I1370 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1628 [1] NUT (3/8-24-THD)  
2. 2J-0157 [1] SEAL-O-RING  
3. 1L-3769 [1] RING-RETAINING  
4. 8H-2778 [1] SEAL-RING  
5. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 2H-3429 [1] RING-RETAINING  
8. 7S-9323 [1] SPRING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 2W-6688 [1] BASE AS-FUEL FILTER  
  7E-5346 [1] VALVE AS (FUEL)  
  8N-6199 [1] BASE-PUMP & FILTER  
11. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Disassembly and Assembly
Turbocharger - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22

Caterpillar Parts SIS Catalog 160H NA :

TURBOCHARGER GP
111-8035 TURBOCHARGER GP
TURBOCHARGER GP
106-7407 TURBOCHARGER GP
MUFFLER & MOUNTING GP
113-8511 MUFFLER & MOUNTING GP
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
134-4208 MANIFOLD GP-EXHAUST
LINES GP-AIR
7C-2094 LINES GP-AIR
LINES GP-AIR
110-0020 LINES GP-AIR
LINES GP-AIR
106-7308 LINES GP-AIR
TURBOCHARGER GP
113-7919 TURBOCHARGER GP
112-1781 CONTROL AR-GOVERNOR
112-7491 CONTROL AR-GOVERNOR
CONTROL GP-FUEL RATIO
111-5162 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
8W-4742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-4742 CONTROL GP-GOVERNOR
COVER GP-TACHOMETER DRIVE
1W-2481 COVER GP-TACHOMETER DRIVE
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP

Truck sale:

Caterpillar 160HNA, Construction
59,125 
Caterpillar 160HNA, Construction
- motor graders
TOROMONT CAT
Canada
Caterpillar 160HNA, Construction
 
Caterpillar 160HNA, Construction
- motor graders
MANTRAC NIGERIA LIMITED
Nigeria
CATERPILLAR 160HNA 1995
 
CATERPILLAR 160HNA 1995
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2005
 
CATERPILLAR 160HNA 2005
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2007
 
CATERPILLAR 160HNA 2007
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.